Holdrite quick strap Water Heater Restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment making quick strap a superior seismic mounting solution. Holdrite quick strap is preferred by DIY, DIFM and professional contractors because it provides the highest quality, safest and easiest installation.

• Water heater restraint to protect against natural disasters: earthquakes, tornadoes and hurricanes
• Easy to install for plumbers/homeowners
• Meets plumbing and real estate codes
• Patented quick link system provides secure frontal attachment
• 24 gauge galvanized steel
• California Division State Architect approval #98-018
• California Division State Architect approval #97-010
• UPC/IPC/IAPMO listed
• Up to 80 gallon water heater
• Hardware included

This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Built-in safety switch to prevent overheating
• Bulk item - no packaging
• Universal replAcement part

This Camco 24 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Electric or gas water heater use
• 24 in. I.D.
• 25 in. outside diameter
• Recyclable
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
• Will not rust or crack
• Helps prevent damage from water leaks
• Made from aluminum

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (2 passes)

• The Rheem Professional Classic 38 Gal. Electric short water heater provides an ample supply of hot water for households with 2 to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty. A 2.5 in. insulation blanket is included with this model for added efficiency.
• Rheem Professional Classic 38 Gal. Lowboy 6-Year 240-Volt 4500-Watt Electric Tank Water Heater With Top T&p Valve
• Delivers 51 Gal. Of Hot Water In The First Hour
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Short Tank Fits In Tight Applications
• 0.92 Uniform Energy Factor Signifies An Energy Efficient Water Heater
• Meets Or Exceeds Naeca Requirements
• Dual 4500-Watt Heating Elements
• Automatic Thermostat Keeps Water At Your Desired Temperature
• Requires A 240-Volt Connection For Installation
• Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• Electric Junction Box Located Above Heating Elements Foe Easy Installation
• Premium Grade Anode Rodprovides Long-Lasting Tank Protection
• Low Lead Compliant
• With ProtectionPlusâ„¢ the 6-year limited tank warranty becomes 10-year
• MFG# XE38S06ST45U1

The Fluidmaster B1H24 Braided Stainless Steel Water Heater Connector is a top choice to replace and upgrade your water heater supply line. Showcasing a 24 in. length and fitting 3/4 in. FIP x 3/4 in. FIP fittings. Fluidmaster water heater water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors come with a 5-year warranty. Featuring exceptional flexibility for fast and easy installation, with easy to grip and durable nickel-plated brass hex nuts, and extra-long and crimped stainless ferrules. They won't kink or crease even in tight spaces. Lead free and meeting all code requirements for flexible water connectors.

• Trust Fluidmaster to replace old, or faulty water heater connectors with a flexible upgrade
• Easy to install
• Durable braided stainless steel build
• Highly flexible to resist kinks and creases in tight spaces
• Heavy duty nickel plated brass hex nuts are easy to grip
• 3/4 in. F.I.P. x 3/4 in. F.I.P. fitting
• 24 in. L
• Lead free and meeting all code requirements
• 5-year warranty

The Camco plastic water heater drain pan helps protect finished surfaces in the event of a water heater leak. Durable plastic construction is flexible and crack and corrode resistant. Made for use with electric water heaters. Comes with fitting attached.

• Made from durable polypropylene plastic
• Will not corrode or crack
• 26 in. ID
• 28 in. OD
• 1-1.5 in. PVC fitting included
• Pre-cut side outlet
• Recyclable
• Non-toxic
• Black finish
• Use with electric water heaters only

Use this plastic drain pan under your electric water heater to help prevent damage to finished surfaces in the event of a leak from your water heater. It is constructed of durable, flexible polypropylene that will not corrode or crack while installing the water heater. It has a pre-cut drain hole and the PVC fitting is included. It should be plumbed to the outside of the structure, away from finished surfaces, if the water heater is installed inside of the structure or elsewhere where a leak from the unit could cause damage to finished surfaces.

• Made for use under an electric water heater
• Injection-molded polypropylene plastic
• Recyclable
• Black
• PVC drain fitting included
• 28 in. I.D.
• 30 in. O.D.
• Pre-cut drain hole
• Non-toxic
• Recommended that pan has an inside diameter 2 in. - 4 in. larger than the diameter of your water heater tank

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (4-passes)

The HOLDRITE expansion tank bracket is a secure and easy method for mounting an expansion tank. This universal bracket is constructed of galvanized stainless steel. Tanks of up to 5 Gal. and up to a 13 in. Dia can be supported.

• Secures expansion tank to wall
• Galvanized and stainless steel construction
• Supports tanks up to 13 in. Dia
• Supports tanks up to 5 Gal.
• Includes mounting bracket, 2 support straps and mounting screws
• Quick-release stainless steel bands
• Fast and easy installation
• Takes load weight off pipes
• HOLDRITE quick strap brand
• Water heater accessories

This thermostat is designed to replace Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. This item is CSA and UL Listed from the USA and Canada. Meets specification lengths AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• Comes from factory set at 120 degree
• Temperature settings can be adjusted from 90 degree to 150 degree
• Lower thermostat
• Wiring diagram included
• For electric water heaters
• Built in safety switch to prevent over heating

This thermostat is designed to replAce Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and Ul Listed from the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Lower thermostat
• Wiring diagram included
• Universal replAcement part

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 18 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves. It is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction. Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

• Extremely durable corrugated stainless-steel construction
• Built in dielectric sleeves eliminates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• Corrugated stainless steel tubing is .01 in. / 25mm thick
• 18 in. L; Minimum recommended bend radius: 2.5 in.
• 3/4 in. FIP connectors
• Chrome plated brass supply nuts
• Soft, thick EPDM rubber washers to create a tight seal. Follow installation instructions carefully and do not over tighten.
• Designed for use in residential and commercial applications for water heater hookups
• For use with water only in accessible locations
• Conforms to ASME A112.18.6/CSAB125.6

Use this product on appropriate gas water heaters. Please follow instructions carefully. Instructions should be included with products.

• Please refer to instructions for installation
• You cannot install this product contact a qualified person
• Follow safety precautions
• 1 year limited warranty
• Metal construction
• Replacement pilot assembly
• Durable
• Long lasting
• Comes in a single
• Multi-colored finish

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Storage tank type: storage tank is required to have a recessed tank flange

The 3/4 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• Designed for potable water distribution as well as hydronic heating applications
• Corrosion resistant to improve longevity
• Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
• Meets IAPMO, UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 3/4 in. pipe insertion depth = 1-1/8 in.

Sharkbite Max Flex Water Heater Connector 3/4" X 3/4"Fip X 12". Mfg #UR3088FX12

• Can Be Installed On Wet Lines And Pressure Tested Immediately.

HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 24 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.

• Extremely durable corrugated copper construction
• Built in dielectric sleeves negates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size; 24 in. length
• For water use only in accessible locations
• FIP connections; Minimum Bend Radius: 2.5 in.
• Zinc plated nuts
• Thick rubber washer to create a tight seal
• Designed for use in residential and commercial applications for water heater hookups

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 24 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products, due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves, it is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

• Extremely durable corrugated stainless-steel construction
• Built in dielectric sleeves eliminates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size
• 24 in. L; Minimum recommended bend radius: 2.5 in.
• 3/4" FIP connections
• Chrome plated brass supply nuts.
• Soft, thick rubber washer to create a tight seal. Follow instructions carefully and do not over tighten.
• Designed for use in residential and commercial applications for water heater hookups
• Conforms to ASME A112.18.6/CSAB125.6

The Fluidmaster B1H18 18 in. Water Heater Connector is a top choice when replacing your water heater supply line. Installation is fast and easy, with easy grip brass hex nuts, and exceptional flexibility that resists kinks or creases in the tightest spaces. This replacement water heater connector fits 3/4 in. F.I.P. x 3/4 in. F.I.P. connections. Designed with quality in mind this water heater connector showcases a 5 year warranty, durable braided stainless steel materials, and nickel plated heavy duty brass hex nuts. Replace old, creased, or problem water heater connectors with a quality you can trust. Lead free and meeting all code requirements. Upgrade your water heater supply line now, to a Fluidmaster Connector.

• Highly flexible water heater connector that resists kinks and creases
• Easy to install, the heavy-duty nickel plated brass hex nuts are easy to grip
• 3/4 in. F.I.P. x 3/4 in. F.I.P
• 18 in. L
• Lead free, and meeting all code requirements
• Quickly replace risky faulty and old connector models
• 5 year warranty
• Featuring a durable build from braided stainless steel
• Highly flexible to resist kinks and creases in tight spaces
• Repair parts that are made to last

The Camco Plastic Upper Thermostat is ideal for use with electric residential water heaters that have both an upper and lower heating element. There is a built-in safety switch to prevent over-heating. Instructions and wiring diagram are included.

• For use with residential electric water heaters
• Compatible with State, A.O. smith and other water heater brands
• CSA Listed and UL Listed for USA and Canada
• Plastic construction
• Apcom style WH10A
• Upper thermostat
• Factory pre-set at 120 degree F (hot)
• Adjustable temperature
• Plastic terminal protector included
• Application voltage: 240-Volt/208-Volt/120-Volt
• High limit control

• The Rheem Professional Classic 40 Gal. Electric medium water heater provides an ample supply of hot water for households with 2 people to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.
• Rheem Professional 40 Gal. Medium Electric Water Heater
• 40 Gal. Tank Provides Ample Hot Water For Households With 2 People To 4 People
• Delivers 55 Gal. Of Hot Water In The First Hour
• Uniform Energy Factor 0.93
• Dual 4500 Watt Heating Elements
• Automatic Thermostat Keeps Water At Your Desired Temperature
• Requires A 240 Volt Connection For Installation
• Medium Tank Profile Fits In A Variety Of Indoor Spaces
• If Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• With Protectionplus The 6-Year Limited Tank Warranty Becomes 10-Year
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Electric Junction Box Located Above Heating Elements For Easy Installation
• Premium Grade Anode Rod Provides Long-Lasting Tank Protection
• Low Lead Compliant
• MFG# PROE40 M2 RH95 (4500W)

This Camco 30 in. I.D. water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the event of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Aluminum construction
• Electric or gas water heater use
• Rust, corrosion, and crack resistant
• 30 in. insideDia
• 31 in. Dia outside
• Recyclable
• Manufacturer recommends drain pan to be 4 in. Dia larger in than the diameter of the water heater
• Helps prevent damage from water leaks

Use this product on appropriate gas water heaters. Please follow instructions carefully. Instructions should be included with products.

• Please refer to instructions for installation
• If you cannot install this product contact a qualified person
• Follow safety precautions
• 1 year limited warranty
• Metal construction
• Replacement burner
• Durable
• Long lasting
• Comes in a single
• Gray finish

This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters that use just a single element and thermostat. It has adjustable temperature settings, pre-set at 120 by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Built-in safety switch to prevent overheating
• Bulk item - no packaging
• Not for use with water heaters that have both upper and lower thermostats/elements

The Rheem PROTECH SP8346 T and P (Temperature and Pressure Relief) Valve is designed to protect water heaters from overheating and over-pressurization. It is a component that is integral to the safe operation of the water heater. The valve features a bronze body with 3/4 in. NPT male inlet and 3/4 in. NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Temperature Relief: 210 degree F (99 degree C), Pressure Relief Range: 75 to 150 psi (5.2 to 10.3 bar).

• Direct replacement for Rheem, Ruud and Richmond water heaters
• Fits most brands including American, AO Smith, Bradford White, Craftmaster, General Electric, GS Wood, Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Sears, State and Whirlpool water heaters
• ASME rated and CSA listed
• Features a unique thermostat with special thermo-bonded coating
• Thermostat is accurate and proven
• Stainless steel spring
• Body length of 4.25 in.
• 3 in. thermostat element
• 1 year limited warranty
• Genuine OEM replacement part

Keep your hot water heater safely elevated off the ground with the Water-Tite Water Heater Stand. Designed to sit 18 inches off the floor, this durable metal stand helps safeguard gas water heaters with an ignition source from potentially hazardous and flammable materials that may spill inside of garages. It also keeps the water heater safe from flooding and other potentially damaging situations, helping to prolong its lifespan. Choose from a model that measures 21 inches long by 21 inches wide and supports up to 650 pounds or a model that measures 24 inches long by 24 inches wide and supports 1,300 pounds. Each gas heater stand is made of durable 18-gauge galvanized steel and assembles easily (screws and nuts included).

• Galvanized-steel stand for gas water heaters
• Keeps 30- to 50-gallon capacity heaters safely elevated 18 inches off the ground
• Made of rigid 18-gauge steel
• Simple assembly with included screws and nuts
• Available in 650- and 1,300-pound-capacity models
• Designed for heavy duty use
• Stable
• Strong
• Easy assembly
• Steel

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Storage tank type: storage tank is required to have a screw plug spud receptacle

The Rheem PROTECH T-O-D Style Upper-Element Thermostat is the most popular upper thermostat used in residential electric water heaters. These water heaters often have a "non-simultaneous" design, which means that only 1 heating element is on at any given time. This type of thermostat is for use in 2-element water heaters.

• Fits most brands: rheem, ruud, richmond, ge, state, kenmore, bradford white, ao smith, American, craft master, lochinvar, reliance, gs wood, mor-flo and whirlpool
• Direct replacement for PROE30 T2 RH95, PROE40 M2 RH95, PROE50 T2 RH95, PROE28 S2 RH95, PROE30 S2 RH95 B, PROE36 S2 RH95, PROE38 S2 RH95 B
• For use in 2-element water heaters
• Replaces APCOM-style thermostats
• Temperature-sensitive bi-metal disc delivers snap action to the contacts
• Energy-efficient range setting from 90° F to 150° F
• Speed and force of contact separation provide a long-lasting, dependable performance at high electrical loads
• Durable metal and plastic construction
• Manual reset switch helps prevent overheating
• UL and CSA Listed for safety
• 1-year limited warranty
• California residents see prop 65 warnings

SharkBite Max Elbow 1/2". Can be rotated after installation. No tube liner required for PEX. Mfg #UR248

• Can Be Installed On Wet Lines And Pressure Tested Immediately.
• Stainless steel retainer adds strength and durability.
• High-performance DZR lead-free brass body.
• No special tools, crimping, soldering or glue required.

The 3/4 in. x 18 in. Tectite by Apollo Water Heater Connector was designed for the fast and simple installation of hot and cold water lines to water heaters. After applying pipe thread tape to the MNPT nipples on your water heater, thread the FNPT end of the Water Heater connector onto the tank and tighten with pliers. Then simply push the Tectite by Apollo Push-To-Connect end onto Copper, PEX, or CPVC pipes and your water heater is connected. The stainless steel braided connectors are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel.

• Constructed of lead free dezincification resistant (DZR) brass and braided stainless steel for superior reliability and strength
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation of water heaters to any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Meets UPC, IPC, and cUPC standard requirements and listed by IAPMO and listed to ASSE 1061/NSF 59
• Demount clip allows for valve removal (included)
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi
• Maximum temperature of 250 degree F

The Backer EHP Inc. nickel based alloy sheathed water heater available in both low and high watt densities provides a great solution for temporarily operating the water heater in free air (not covered with water) and for longer life when operating with mineral deposits on the sheath. Multiple water heater manufacturers now use this type of alloy sheathed elements as original equipment. Available replacements are the standard square flange, the straight thread screw plug and the tapered thread screw plug.

• Sheath material nickel based stainless steel alloy sheath
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type low watt density fold back (4-passes)

This thermostat is designed to replace Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. Meets specification lengths, AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient temperature range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• High limit control
• Temperature can be set from 90 degree to 150 degree
• Built-in safety switch to prevent overheating
• Wiring diagram included
• For electric water heaters
• Upper thermostat

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 3500-Watt
• Design type low watt density fold back (4 passes)

The Rheem PROTECH T-O-D Style Single-Pole Lower Thermostat is ideal for use in 2-element residential water heaters and can replace APCOM-style thermostats. These water heaters often have a "non-simultaneous" design, which means only one element is on at any given time. This thermostat has a temperature-sensitive bi-metal disc to deliver snap action to the contacts.

• Fits most brands: Rheem, Ruud, Richmond, GE, State, Kenmore, Bradford White, AO Smith, American, Craftmaster, Lochinvar, Reliance, GS Wood, Mor-Flo and Whirlpool
• Direct replacement for PROE30 T2 RH95, PROE40 M2 RH95, PROE50 T2 RH95, PROE28 S2 RH95, PROE30 S2 RH95 B, PROE36 S2 RH95, PROE38 S2 RH95 B
• For use in 2-element water heaters
• Replaces APCOM-style thermostats
• Temperature-sensitive bi-metal disc delivers snap action to the contacts
• Energy-efficient range setting from 90 degree F to 150 degree F
• Speed and force of contact separation provide a long-lasting, dependable performance at high electrical loads
• Durable metal and plastic construction
• Manual reset switch helps prevent overheating
• UL and CSA listed for safety
• 1 year limited warranty
• California residents see prop 65 warnings

• Flow Co is a reliable non-thermostatic water heater delivering endless hot water on demand. Flow Co is ideal for single sensor faucets or single metering faucets for handwashing and other fixed-flow applications. The SPEX95 has 9.5 kW and 240-Volt requirements.
• Eemax Flowco 9.5kW, 240-Volt Electric Tankless Water Heater
• Safe Start Technology
• Mounts In Any Orientation
• Integral 3/8 In. Compression Fittings
• Compact Size
• Control System Activates Heater Only On Demand
• High Temperature Limit Switch (Eco - Automatic Energy Cut-Off)
• Self-Diagnostics/Intelligent Controls
• No T And P Relief Valve Needed (Check Local Codes)
• Low Activation Flow Starting At 0.25 Gpm Turn On (Model Dependent)
• Infocue - Visible Led Indicator
• MFG# SPEX95

• The Rheem Classic Atmospheric 40 Gal. Natural Gas Tall Water Heater comes with a 38000 BTU/hour environmentally friendly low NOx burner that provides ample hot water for households with 2 to 4 people. The push button ignition system ensures safe and easy startup. Its maintenance free combustion air intake system means there are no filters to clean and replace. The self-diagnostic gas control valve monitors system performance. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation.
• Rheem 40 Gal. 38K BTU Natural Gas Water Heater
• California Residents: Water Heater Does Not Meet Ultra-Low Nox (Uln) Emissions Requirements; Regulations Prohibit The Sale, Shipment Or Installation Of This Water Heater In Any Air Quality District That Requires Uln Water Heaters
• Maintenance Free - No Filter To Clean
• Protective Control System That Disables The Heater In The Presence Of Flammable Vapor Accumulation
• Eco-Friendly Burner, Low Nox Design
• Premium Grade Anode Rod Provides Long-Lasting Tank Protection
• Enhanced Flow Brass Drain Valve
• Temperature And Pressure Relief Valve Included
• Easy To Light - No Matches Required
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• With Protectionplus The 6-Year Limited Tank Warranty Becomes 10-Year
• Exclusive Air/Fuel Shut-Off Device
• Uniform Energy Factor (Uef) 0.58
• Low Lead Compliant
• More Hot Water At A Low Operating Cost
• MFG# PROG40-38N RH62

• Eemax Electric Mini Tanks offer 99 thermal energy efficiencies that pays for itself. Eemax's mini tanks minimize stand-by heat loss - don't pay for keeping water hot in a large storage tank 24/7 Saving energy also means you are reducing your carbon footprint. Enjoy up to 90 space saving compared to large tank water heaters. This means you can put your Eemax heater anywhere. With Eemax Mini Tanks dangerous temperature levels and spikes are no longer a problem. Mini Tanks run on safe electricity no venting required or carbon monoxide danger. You can expect decades of trouble free performance from your Eemax Mini Tanks and can last nearly twice as long as a tank heater.
• Eemax 2.5 Gal Electric Mini Tank Water Heater
• Point Of Use Heating Eliminates Long Hot Water Pipe Runs
• Compact Design-Fits Virtually Anywhere
• Can Be Installed On Hot Or Cold Water Feed
• Adjustable Temperature Control 50-140
• T And P Valve Included
• Single Weld Glass Lined Tank For Extended Life
• Floor Mount Or Wall Hung Bracket Included
• Status Indicator Light
• 120-Volt Cord Provided
• Etl Listed To Ul174 And Nsf 373
• Microprocessor Thermostatic Control + / - 1 Degree F
• Tested By Independent Laboratory To Maintain Water Purity
• MFG# EMT2.5

The 3/4 in. x 18 in. Tectite by Apollo Corrugated Stainless Steel Water Heater Connector was designed for the fast and simple installation of hot and cold water lines to water heaters. After applying pipe thread tape to the MNPT nipples on your water heater, thread the FNPT end of the Water Heater connector onto the tank and tighten with pliers. Then simply push the Tectite by Apollo Push-To-Connect end onto Copper, PEX, or CPVC pipes and your water heater is connected. Using Tectite by Apollo Corrugated Stainless Steel Water Heater Connectors is the fastest, cleanest, and simplest way to install a water heater.

• No-kink corrugated stainless steel construction guarantees maximum flow rate even in tight radius bends
• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 68
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for connector removal (sold separately)
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

• A. O. Smith Top Connect 38-Gallon Electric Water Heater. 240 Volts 4500 Watt Long-Life Stainless Steel Elements. DynaClean Diffuser System Reduces Sediment Buildup Extending Tank Life. Blue Diamond Tank Lining Provides Protection Against Leaks. CoreGuard Anode Rod Is Industry-Leading Anode Technology To Extend Useful Life. Full-Flow Tamper-Resistant Brass Drain Valve. 0.92 Uniform Energy Factor. Meets 2015 NAECA Efficiency Standards. For Top-To-Side TP Drain Connection Use With HDS #730092 Conversion Kit. 8-Year Warranty For Units Purchased After 1/31/2021. Mfg #ENLB-40
• A. O. Smith Lowboy Top Connect 38-Gallon Electric Water Heater
• 38 gal
• Lowboy
• 23" dia x 32"
• Top water connections and top t&p valve
• 240 volts, 4,500 watt long-life stainless steel elements
• Dynaclean diffuser system reduces sediment buildup, extending tank life
• Blue diamond tank lining provides protection against leaks
• Coreguard anode rod is industry-leading anode technology to extend useful life
• Full-flow tamper-resistant brass drain valve
• 0.92 uniform energy factor
• Meets 2015 naeca efficiency standards
• For top-to-side t&p drain connection use with hds #730092 conversion kit
• 8-year warranty (for units purchased after 1/31/2021)
• Model includes insulation blanket
• MFG# ENLB-40

Falcon Stainless Connector with 3/4 in. Female Iron Pipe by a 3/4 in. Female Iron Pipe and 18 in. in length. This Flexible Stainless Steel Corrugated connector is for use on both Water Softeners and Water Heaters. Easy to install.

• 304 series stainless steel
• Extremely flexible
• Will not corrode or rust
• High temp EPDM washer chlorine and chloramine resistant
• Highest flow rate in the industry - no restrictions
• 100% leak tested

To be used for inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 3/4 in. NPT x 3/4 in. NPT x 2.5 in. L. Can be used with electric or gas water heaters.

• For inlet and outlet hookups where dissimilar metals occur in piping and plumbing systems
• 2.5 in. L
• 3/4 in NPT x 3/4 in. NPT
• Plastic lining prevents corrosion
• Galvanized metal
• 2/card
• Use for water heater inlet and outlet connections
• Dielectric
• Silver
• Pair

The Tough Water Heater pan is the toughest water heater drain pan you can buy. The Pro Series Pan is approved for use with either Electric or Gas Water Heaters. It's made from SecureFLX, which is the safest, strongest and most innovative polymer on the market. This pan line is extremely tough, extremely flexible, and is approved by the ICC to be in compliance with the IPC, UPC, IRC and NSPC.

• Approved for use with either gas or electric water heaters
• Virtually indestructible, flexible, self-extinguishing
• ICC-ES approved compliance with the IPC, UPC IRC, and NSPC
• Easy no lift tank installs
• Available in multiple sizes: 21 in., 23 in., 25 in., 27 in., 31 in.
• Made from SecureFLX, which is the safest, strongest and most innovative polymer on the market
• Extremely tough
• Extremely flexible
• Includes custom fitting
• Ideal for all applications

Rheem® Electric Water Heater Thermostat Kit. 208, 240, 277 Or 480 Volt. Adjustable Temperature Range From 100 To 150°F. Contains One Upper And One Lower Thermostat. Factory Authorized Genuine Replacement Part. Mfg #SP11695 / SP11698

• 208, 240, 277 Or 480 Volt
• Adjustable Temperature Range From 100 To 150°F
• Contains One Upper And One Lower Thermostat
• Factory Authorized Genuine Replacement Part

• The Rheem Professional Classic 47 Gal. Electric short water heater provides an ample supply of hot water for households with 3 people to 5 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.
• Rheem Professional Classic 47 Gal. Lowboy 6-Year 240-Volt 4500-Watt Electric Tank Water Heater
• Isolated Tank Design Reduces Conductive Heat Loss
• Requires A 240-Volt Connection For Installation
• Premium Grade Anode Rod Provides Long-Lasting Tank Protection
• Electric Junction Box Located Above Heating Elements For Easy Installation
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Automatic Thermostat Keeps Water At Desired Temperature
• Self-Cleaning Device Fights Harmful Sediment Build-Up With A High-Velocity Spiraling Water Stream
• Temperature And Pressure Relief Valve Included
• 6-Year Limited Tank And Parts Warranty
• With ProtectionPlus The 6-Year Limited Tank Warranty Becomes 10-Year
• Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• Dual 4500-Watt Heating Elements
• 0.93 Uniform Energy Factor Signifies An Energy Efficient Water Heater
• Low Lead Compliant
• MFG# PROE47 S2 RH95

The Rheem Performance 38 Gal. Electric short water heater provides an ample supply of hot water for households with 2-people to 4-people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty plus a 1-year in home labor warranty. A 2.5 in. insulation blanket is included with this model for added efficiency.

• Electric water heater is easy to maintain
• Delivers 51 gal. of hot water in the first hour
• 6-year limited warranty on tank and parts for your convenience
• 1-year in home labor warranty for peace of mind
• Short tank fits in tight applications
• 0.92 uniform energy factor signifies an energy efficient water heater
• Adjustable thermostat to adjust water temperature to meet your hot water needs
• Dual 4500-Watt heating elements
• Automatic thermostat keeps water at your desired temperature
• Requires a 240-Volt connection for installation
• Now features a brass drain valve for added resiliency and durability
• Designed for easy replacement of your existing water heater
• Meets 2015 NAECA Standards

• The Rheem Professional Classic 36 Gal. Electric short water heater provides an ample supply of hot water for households with 2 to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.
• Elec 36 Gal Short
• Electric Water Heater Is Easy To Maintain
• Short Tank Fits In Tight Applications
• Delivers 46 Gal. Of Hot Water In The First Hour
• 6-Year Limited Warranty On Tank And Parts For Your Convenience
• Over-Temperature Protector Cuts Off Power In Excess Temperature Situations
• Meets Or Exceeds Naeca Requirements
• Dual 4500-Watt Heating Elements
• Automatic Thermostat Keeps Water At Your Desired Temperature
• Requires A 240-Volt Connection For Installation
• 0.92 Uniform Energy Factor Signifies An Energy Efficient Water Heater
• If Heating Elements Of Different Wattages Than Those Shown Are Demanded By Zone Requirements, They Must Be Specifically Requested
• Includes Temperature And Pressure Relief Valve
• Premium Grade Anode Rod Provides Long-Lasting Protection
• Provides Ample Supply Of Hot Water For Households Of 2 To 4 People
• MFG# PROE36 S2 RH95 (CP)

This heavy-duty element socket fits standard 1/2 in. socket drives. It is made of chrome plated steel. It's purpose is to remove an element from an electric water heater. This tool will help remove elements that may be corroded and not removable with a standard element wrench.

• Fits 1/2 in. socket drive
• Heavy-duty
• Easy to use
• Element removal tool
• Use with electric water heater
• Works to remove elements that may have corrosion
• Small and compact
• For the professional plumber
• Makes element removal easy
• Element socket