Engineered for reliability, The Taco Heat Motor Power Head provides a time proven method for operation of hydronic zone valves. The exclusive heat motor design operates silently, while the twist off head allows for serviceability without disturbing system connections. This power head is 24 VAC powered with an isolated end switch.

• Isolated end switch
• 24 VAC powered
• For Taco series 570 zone valves (570, 571, 572, and 573)
• Allows for service of valve without removing it

The 005-050RP Cartridge Assembly is used on several models of Taco circulators. This kit takes the place of conventional seal kits and is extremely easy to install. The Cartridge comes with all the hardware needed to extend your Taco Circulator's operating life.

• Repair part
• Includes casing body bolts
• Easy to install
• 3-year warranty

lead free bronze flanges. makes installation and service easy. provides a strong and water tight connection between pipe and circulator.

• For use with Astro 220 and 225 SSU models
• 1-1/4 in. NPSM x 3/4 in. sweat
• Lead free
• Set contains 2 half unions and gaskets
• Easy to install
• For use with copper pipe
• Water tight connection
• High quality
• Genuine factory replacement
• Complies with California & Vermont lead free laws

The DELAVAN 0.90 70A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 1.00 70B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 1.25 70A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 0.50 70B1 Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

Danfoss -- Wall Mount Operator with Combined Remote Mounted Sensor, Dial and Capillary Tube For Ra2000 Units. Cap Size: 6".

The DELAVAN 0.75 80W Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type W-nozzles are neither truly hollow nor solid. These nozzles frequently can be used in place of either solid or hollow cone nozzles between 0.40 and 8.00 GPH, regardless of the burners air pattern. The lower flow rates tend to be more solid. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

Danfoss -- Wall Mount Operator with Combined Remote Mounted Sensor, Dial and Capillary Tube For Ra2000 Units. Cap Size: 16".

The DELAVAN 1.00 60B1 Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 0.85 70B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

This 1/2 in. lead free anti-siphon hot or cold water vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of polished chrome plated lead free construction, chemical resistant silicone seat disc, chrome hood, and an atmospheric vent to prevent spilling. It has a full size orifice to assure pipe size capacity and maximum flow. It is ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment.

• Lead free construction
• Chrome finish
• Female NPT inlet and outlet
• Hot or cold water
• Designed to prevent the backflow of polluted water from entering into the potable water supply
• Ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment
• Maximum pressure is 125 psi

The Honeywell Home Aquastat Relay is designed for use with an HVAC heating system. This immersion-type controller provides high limit protection while switching control of the oil burner and the circulator. Compatible with Honeywell Home models.

• Designed for use with an HVAC heating system
• 120 240 degree F range with 8 degree F fixed differential, low volt/millivolt
• Select models include transformer and accessory terminals for adding a remote low limit controller
• Requires a 24 VAC thermostat with heat anticipator set at 0.2A

The Armstrong ball bearing SBA contain an interchangeable module that includes a stainless steel pump shaft and a housing that contains precision crafted front and back end bearings that are permanently lubricated. Safer solution for facility and service personnel. faster on site service and replacement.

• S&H #3 Series Maintenance-free Seal Bearing Assembly without Impeller
• Universal- fits B&G 3 piece circs
• A longer circulator life without maintenance (regular oil lubrication is not required) no more oil pools on floor
• Stainless steel face plate, coupler face guard meets or exceeds OSHA standards
• The standard for 65 years in hydronics
• Repairable, replaceable, environmentally friendly and now maintenance free

The DELAVAN 1.00 80B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 1.10 80A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 0.65 80B Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

This 3/4 in. hose connection vacuum breaker permits the attachment of portable hoses to hose thread faucets and prevents the reverse flow of polluted water into the potable water supply due to backsiphonage. It consists of a brass body construction, stainless steel working parts, and a rubber diaphragm and disc. It is secured with allen head set screw. It is ideal for inside and outside, health hazard installations requiring non-continuous pressure such as service sinks, swimming pools, photo developing tanks, laundry tubs, wash racks, dairy barns, marinas, and general outside gardening uses. Check with local inspection authorities for installation requirements. Maximum pressure is 125 psi (8.6 BAR).

• Brass body
• Durable rubber diaphragm and disc for consistent positive seating
• Allen set screw
• Includes rubber diaphragm and disc and draining stem
• Designed to prevent the backflow of polluted water from entering into the potable water supply
• Ideal for inside and outside, health hazard installations requiring non-continuous pressure such as service sinks, swimming pools, photo developing tanks, laundry tubs, wash racks, dairy barns, marinas, and general outside gardening uses
• Maximum pressure is 125 psi

The DELAVAN 1.00 70A Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type A-nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

The DELAVAN 0.75 45B1 Oil Nozzle has a stainless-steel, hollow orifice and features a brass body. Type B-nozzles produce a spray that distributes droplets uniformly throughout the complete pattern. The spray pattern becomes progressively hollower at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. This boiler replacement part is compatible with an oil-burning appliance.

• Precise spray angles and optional spray uniformity through new machining process
• Reduced distributor size with shorter tangential slots to avoid plugging
• Aerodynamic body configuration
• Rolled threads to avoid metal chips and burrs
• Sintered filter for maximum protection
• Boiler replacement part is compatible with an oil-burning appliance
• ISO 9001 certified

Long lasting metal fin-tool that straightens and cleans condenser and evaporator fins. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• 1 tool for all units
• Heavy-duty spring wire bristles automatically adjust to all fin spacing's
• Exclusive tension adjustment band is featured to allow maximum rigidity and ease of operation
• Straightens most severely damaged fins
• Stainless steel teeth
• Cushioned red handle to protect your knuckles
• Straightens damaged condenser and evaporator fins quickly and easily
• Increases air conditioner efficiency
• Helps keep air conditioners, condensing units running efficiently
• Works on most air conditioning and refrigeration coils

Provide precise and accurate control of room temperature. Control temperature by modulating the flow of hot water or steam through free-standing radiators, convectors and other heating units with high capacity requirements. Continually monitor and adjust room temperature for consistent comfort.

• Designed with the higher capacity normally required by North American heating systems
• Valve seat disc, which is made of resilient material (EPDM)
• Nickel-plated bronze casted body with working parts in cartridge insert for ease of service
• All working parts are replaceable while valve remains in service, in-line, under pressure
• Valves normally open without control mounted
• Valves may be used with V110 valves
• Ensures tight shutoff on steam or hot water systems
• Meet ASHRAE standard 102-1989
• Includes sensor, set point dial and valve actuator
• Components may be integral or connected by capillary tubes

The Symmons W-400 Washing Machine Valve is constructed of solid brass and stainless steel and carries a limited lifetime consumer warranty. This valve only assembly removes water supply pressure between cycles or during vacations to prevent burst hoses that could lead to damaging floods. This laundry shutoff valve has an easy to use single lever to shut off both cold and hot water simultaneously.

• On/off settings
• Removes water supply pressure to limit danger of flooding from bursting supply hoses
• Single lever handle to manually control both hot and cold water supply to machine
• ½ inch sweat union ell connections
• 1 and ½ inch drain connection
• Constructed of brass, stainless steel, and plastic
• Includes a brass sump pan
• Limited lifetime consumer warranty; 10 year warranty for commercial use