BrassCraft 3/8In. OD Female Compression Inlet x 3/8 In. OD Compression Outlet 1/4-Turn Straight Ball Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a quarter turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined one-piece brass body provides strength, durability and long-lasting performance
• 3/8 in. Nom Female Comp Inlet x 3/8 in. OD Comp Outlet
• Compatible with copper pipe
• For use in potable water distribution systems and recirculating water systems that produce continuous use temperatures above 115 degree F
• Machined body provides strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Plated stem provides corrosion resistance and prevents o-ring damage. Metal handle is designed for durability, corrosion resistance & a sleek appearance
• 100% leak tested to ensure reliable, leak-free performance
• For indoor use
• Temperature rating: 40 degree to 180 degree F
• Pressure rating: 125 psi maximum
• IAPMO listed to ASME A112.18.1 / CSA B125.1

This 1/2 in. lead free straight pattern boiler drain shutoff is designed for water service use in commercial and residential hydronic heating systems. It provides positive shutoff for boiler drain or sill cock applications. This shutoff consists of a lead-free body construction and 1/2 in. dual connection for either solder or male IPS and 3/4 in. hose thread connection, Teflon stem packing, and cast iron handwheel. The maximum pressure is 200 psi (14 BAR) WOG and maximum temperature is 180 degree F (82 degree C).

• Lead free construction
• Straight pattern
• Dual inlet connection, male IPS or solder inlet
• Hose thread outlet
• For use in commercial and residential hydronic heating systems
• Max. pressure 200 psi; max. temperature 180 degree F

This 3/4 IN lead free anti-siphon pressure vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of a bronze body construction silicone rubber check valve disc, plastic check valve seat, stainless steel springs, a bonnet with silicone rubber O-ring seal, a lightweight plastic disc float, tee handle shutoff, and test cocks for winterization draining. It is ideal in health hazard continuous pressure applications such as irrigation systems and industrial process water systems where the water enters the equipment at or below its flood rim. The maximum pressure is 150 psi (10.3 BAR) and the minimum pressure is 15 psi (55 kPa).

• Lead free construction
• Replaceable seat
• Female NPT inlet and outlet with quarter turn shutoffs
• Easy internal access
• Designed to prevent the backflow of polluted water from entering into the potable water supply
• Ideal for irrigation systems and industrial process water systems where the water enters the equipment at or below its flood rim
• Maximum pressure is 150 psi

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• Meets all UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• 1/2 in Pipe Insertion Depth = 15/16 in.

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

This 3/4 inch lead free straight pattern boiler drain shutoff is designed for water service use in commercial and residential hydronic heating systems. It provides positive shutoff for boiler drain or sill cock applications. This shutoff consists of a lead free body construction and 3/4 inch male IPS and 3/4 inch hose thread connection, Teflon stem packing, and cast iron handwheel. The maximum pressure is 200 psi (14 bar) WOG and maximum temperature is 180 degrees F (82 degrees C).

• Lead free construction
• Straight pattern
• Male IPS inlet
• Hose thread outlet
• For use in commercial and residential hydronic heating systems
• Max. pressure 200 psi; maximum temperature 180 degree F

BrassCraft Toilet Supply Kit everything you need to connect your water supply to your toilet. Components include: (1) 1/2 in. Nominal Sweat inlet x 3/8 in. O.D. Compression outlet multi-turn straight water shut-off valve with 5 in. Sweat Extension Tube (1) 3/8 in. O.D. x 12 in. L copper riser and (1) bell flange. Straight valves are most often used when the water pipe enters the room from the floor. 5 in. extension tube slides over existing 1/2 in. nominal copper water pipe, sweat connection into place. Extension tube may be cut to required length using a tube cutter. All components are chrome-plated for a clean professional appearance.

• Kit includes: (1) 1/2 in. nominal sweat x 3/8 in. O.D. compression multi-turn straight valve with 5 in. extension tube, (1) 12 in. toilet riser and (1) bell escutcheon
• Valve compatible with 1/2 in. nominal (5/8 in. O.D.) copper pipe
• 5 in. extension tube slides over existing 1/2 in. nominal copper pipe, sweat connection, may be cut to required length
• Valve has a machined, 1-piece brass body for strength, durability and long-lasting performance
• Valve controls water flow with a few turns of the handle
• 3/8 in. O.D. x 12 in. riser features standard gasket nosepiece
• Riser is cut-to-length for flexible fit and clean, professional appearance
• Chrome finish
• For use in potable water distribution systems in accessible locations only
• Temperature rating: 40 degree F to 140 degree F
• Pressure rating: 125 psi maximum
• No-lead certified
• IAPMO and CSA listed to ASME A112.18.1/CSA B125.1

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

This 1 in. lead free anti-siphon pressure vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to backsiphonage. It consists of a bronze body construction silicone rubber check valve disc, plastic check valve seat, stainless steel springs, a bonnet with silicone rubber O-ring seal, a lightweight plastic disc float, tee handle shutoff, and test cocks for winterization draining. It is ideal in health hazard continuous pressure applications such as irrigation systems and industrial process water systems where the water enters the equipment at or below its flood rim. The maximum pressure is 150 psi (10.3 BAR) and the minimum pressure is 15 PSI (55 kPa).

• Lead free construction
• Replaceable seat
• Female NPT inlet and outlet with quarter turn shutoffs
• Easy internal access
• Designed to prevent the backflow of polluted water from entering into the potable water supply
• Ideal for irrigation systems and industrial process water systems where the water enters the equipment at or below its flood rim
• Maximum pressure is 150 psi

This Brass Craft brand 3/8 in. Compression/Push x 3/8 in. Compression/Push Straight Push Fitting is perfect for your project. With no tools or tube inserts required, it is suitable for both do it yourselfers and pros, alike. Use this product with instrumentation, hydraulic and pneumatic systems. Use it to connect to copper, PEX and other good quality plastic tubing. It is crafted to endure 150 psi at 70° F and 60 psi at 140°F.

• 3/8 in. compression/push x 3/8 in. compression/push straight
• Easy to use, no tools push to connect
• Durable nylon construction
• 150 psi at 70°F and 60 psi at 140° F
• No lead certified
• Easy to use

BrassCraft 1/2 In. Nom Sweat Inlet x 3/8 In. OD Compression Outlet Multi-Turn Straight Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Compatible with Copper
• Machined, one-piece body construction for strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Easy-to-remove handle protects against accidental operation during rough-ins
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Rough brass
• Temperature rating: 40 degree to 160 degree F
• Pressure rating: 125 psi maximum
• No-Lead Certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1
• Designed, Machined and Assembled in the USA

• Kit includes: Ordering Code #0887045, Model #RK 007M2-CK1, 3/4" 007M2 first check repair kit; Ordering Code #0887046, Model #RK 007M2-CK2, 3/4" 007M2 second check repair kit; Ordering Code #1047394, Model #99BA47, retainer

• Kit includes: Ordering Code #0887719, Model #RK 007M2-CK1, 1-1/4" - 1-1/2" 007M2 first check repair kit; Ordering Code #0887720, Model #RK 007M2-CK2, 1-1/4" - 1-1/2" 007M2 second check repair kit; Ordering Code #1047099, Model #DC7EA47-P, retainer

• Kit includes: Ordering Code #0887186, Model #RK 007M1-CK1, 1-1/2" - 2" 007 first check repair kit; Ordering Code #0887187, Model #RK 007M1-CK2, 1-1/2" - 2" 007 second check repair kit

• Kit includes: Ordering Code #0887026, Model #RK 007M1-CK4, 3/4" - 1" 007 first or second check repair kit; Ordering Code #1047382, Model #DC7CA47, retainer

• Kit includes: Ordering Code #0887023, Model #RK 007-CK1, 3/4" - 1" 007 first check repair kit; Ordering Code #0887024, Model #RK 007-CK2, 3/4" - 1" 007 second check repair kit; Ordering Code #1047382, Model #DC7CA47, retainer