SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• 1/2 in. pipe insertion depth = 15/16 in.

The Homewerks 1/2" NOM Comp x 3/8" OD Comp Multi-Turn Angle Shut Off Valve controls water flow to a plumbing fixture. It is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture without having to turn water off to the entire home.The brass construction is durable and corrosion-resistant. Bring quality and efficiency to your project with this angle shut-off valve from Homewerks.

• 1/2 in. nominal compression x 3/8 in. O.D. compression
• Multi-turn handle
• Compatible with copper
• Chrome plated finish
• Maximum pressure rating of 125 PSI at 180 degrees Fahrenheit
• Limited lifetime warranty
• IAPMO cUPC, NSF/ANSI/CAN 61 and Lead Free certified

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/2 in. Nom Compression Inlet x 3/8 in. O.D. Compression x 3/8 in. O.D. Compression Dual Outlet Multi-Turn Valve controls water flow to household plumbing fixtures. The dual outlet allows two independent supply lines to be attached to a single valve. Ideal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined one-piece brass body provides strength, durability and long-lasting performance
• For use in potable water distribution systems; not intended for recirculating water systems that produce continuous use temperatures above 115 degree F; for those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Easy-to-remove handle protects against accidental operation during rough-ins
• 1-piece shut-off mechanism provides smooth on-off operation
• IAPMO ASME A112.18.1/CSA B125.1
• Designed, machined and assembled in the USA

Perfect for residential or commercial use on water, air, steam, oil or gas. The Everbilt Lead Free Ball Valve is designed to fit for a variety of applications. It works as a water shut off valve and is constructed of heavy-duty, corrosion-resistant forged brass and features a lever handle and copper sweat connections on either end. The full port design provides maximum flow and minimum pressure drops.

• Extremely low return rate
• Forged brass body
• Full port
• Quarter-turn operation
• Lead free design is suitable for all potable water supply installations
• During installation, only apply heat to valve while in the open position
• Can be soldered onto Type K, L or M rigid copper pipe
• Suitable for non-shock operating pressures up to 600 psi
• Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shutoff and re-opening
• IAPMO and CSA Listed
• Certified to ANSI / NSF standard 61-9 Annex G
• Manufactured in an ISO accredited facility

BrassCraft 1/2 in. Nom CPVC x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined, one-piece body construction for strength, durability and long-lasting performance
• Compatible with CPVC tubing
• For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115 degree F. For those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Easy-to-remove handle protects against accidental operation during rough-ins
• Temperature rating: 40 degree to 160 degree F
• Pressure rating: 125 psi maximum
• No-lead certified
• IAPMO and CSA Listed to ASME A112.18.1 / CSA B125.1

Sharkbite 1/2" Pushtoconnect Coupling. Mfg #UR008

• Doesn't Require Special Tools, Crimping, Glue Or Soldering.

With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home. 100% leak tested to ensure reliable, leak-free performance. 1/2 in. Nom Comp Inlet x 3/8 in. O.D. Comp Outlet 1/4-Turn Angle Ball Stop.

• Machined one-piece brass body provides strength, durability and long-lasting performance
• For use in potable water distribution systems and recirculating water systems that produce continuous use temperatures above 115 degree F
• Precision-machined brass ball to provide smoother operation without freeze ups even after long periods of non-use
• Blow-out proof, plated stem is assembled from the inside with double O-rings to help ensure safe, reliable performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• 100% leak tested to ensure reliable, leak-free performance
• Temperature rating: 40 to 180 degree F
• Pressure rating: 125 psi maximum
• IAPMO ASME A112.18.1/CSA B125.1

The Homewerks 1/2 in. FIP x 3/8 in. O.D. compression multi-turn angle shut-off valve controls water flow to a plumbing fixture. It is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture without having to turn the water off to the entire home.The brass construction is durable and corrosion-resistant. Bring quality and efficiency to your project with this angle shut-off valve.

• 1/2 in. FIP x 3/8 in. O.D. compression
• Multi-turn handle enables rapid and safe flow control in cold water pipes
• Compatible with iron pipe
• Chrome finish
• Limited lifetime warranty
• Maximum pressure rating of 125 PSI at 180 degrees Fahrenheit
• NSF/cUPC/ANSI 61 certified

The Tectite by Apollo 1/2 in. Push-To-Connect x 3/8 in. O.D. Compression Quarter-Turn Angle Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Angle Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 3/8 in. O.D. male compression outlet allows for the integration of supply lines for connection to the end fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 82
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

Sharkbite Max Ball Valve 3/4" Model UR22185. Mfg #UR22185

• Can Be Installed On Wet Lines And Pressure Tested Immediately
• Stainless steel retainer adds strength and durability
• Can Be Installed On Wet Lines
• Sharkbite Max Ball Valve 3/4"

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe

1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Stop with Brass Stem. Machined, 1-piece body construction for strength, durability and long-lasting performance. Easy-to-remove handle protects against accidental operation during rough-ins.

• Compatible with copper or PEX (PEX installations require a stainless steel tube insert)
• For use in potable water distribution systems; not intended for recirculating water systems that produce continuous use temperatures above 115 degree F; for those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• For indoor use
• Easy-to-remove handle protects against accidental operation during rough-ins
• 1-piece shut-off mechanism provides smooth on-off operation
• No-lead certified
• IAPMO and CSA listed to ASME A112.18.1/CSA B125.1
• Designed, machined and assembled in the USA

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• Full port
• Blowout-proof stem
• Female solder cup end connections
• CSA certified to ASME B16.44
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
• Standard lever handle
• "11/2 I.D. and 1.625 O.D."

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)

SharkBite Push-to-connect ball valve is the easiest way to install a new or replacement shut-off ball valve. The single lever quarter-turn control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the valve after installation. Removing the valve is just as fast using a disconnect tool so the valve can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.

• Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 200 degrees Fahrenheit and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• 5-Year warranty when used with SDR-9 HDPE pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 3/4 in. Pipe Insertion Depth = 1-1/8 in.

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

The 3/4 in. Tectite by Apollo Push-To-Connect ball valve is the fastest, cleanest and simplest way to install or replace a ball valve on copper, CPVC, PE-RT and PEX piping systems without the use of tools, solder, open flame or glue. The quarter turn, single lever control allows for simple control of water flow in hydronic and potable water systems. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, valves may be rotated for simpler installation in tight spaces.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Quarter turn lever handle for simple flow control
• Meets UPC, IPC and cUPC standard requirements and listed by IAPMO and listed to ASSE 1061/NSF 60
• Demount clip allows for valve removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

Sharkbite Max Ball Valve 1/2" Model UR22222. Mfg #UR22222

• Can Be Installed On Wet Lines And Pressure Tested Immediately
• Stainless steel retainer adds strength and durability

Forged brass construction Chrome plated brass ball Double O-Rings stem seal Teflon seats Tamper proof Blue lever handle Certified 1/2 psi at the appliance Certified 5 psi for indoor piping systems For use with natural, manufactured, mixed gases and LP gas-air mixtures Made in Italy. This ball valve was made in Italy. It is constructed from forged brass. Its connections are FIP x Flare.

• Forged brass construction
• Chrome plated brass ball
• Double O-ring stem seal
• Teflon seats
• Tamper proof
• Blue lever handle
• Certified 1/2 psi at the appliance
• Certified 5 psi for indoor piping systems
• For use with natural, manufactured, mixed gases and LP gas-air mixtures
• Made in Italy

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

BrassCraft 1/2 In. Nom Compression Inlet x 1/4 In. OD Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Compatible with Copper or PEX (PEX installations require a stainless steel tube insert)
• Machined, one-piece body construction for strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Easy-to-remove handle protects against accidental operation during rough-ins
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Chrome-plated brass
• Temperature rating: 40 degree to 160 degree F
• Pressure rating: 125 psi maximum
• No-Lead Certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1
• Designed, Machined and Assembled in the USA

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shutoff and re-opening
• IAPMO and CSA listed
• Certified to ANSI / NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

The ApolloPEX 3/4 in. Brass PEX Barb Ball Valve is simple to install and provides flow control through an anti-stick and smooth operating quarter turn lever handle. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX valves can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Most economical piping system available
• Quarter-turn lever handle design for simple flow control
• Compatible with PEX pipe
• Meets UPC, IPC and cUPC standard
• Can be secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
• NSF listed
• Barb x barb connection for PEX plumbing systems
• Rated to 200 degree F and 200 psi

BrassCraft 1/2 in. Nom Compression Inlet x 3/8 in. OD Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined, 1-piece body construction for strength, durability and long-lasting performance
• 1/2 in. nom comp inlet x 3/8 in. O.D. comp outlet multi-turn angle stop
• Compatible with copper
• For use in potable water distribution systems; not intended for recirculating water systems that produce continuous use temperatures above 115 degree F; for those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Easy-to-remove handle protects against accidental operation during rough-ins
• Temperature rating: 40 degree to 160 degree F
• No-lead certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications.

• Lead free
• Full port
• Blowout-proof stem
• Standard lever handle
• Female solder cup end connections
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372
• Valve pressure rating 600 psi/41.4 in. bar non-shock cold working pressure (3/8 in. to 2 in.)

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega Smart Connect makes secure connection in less than 7 seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux, or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega Smart Connect makes secure connection in less than 7 seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux, or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

SharkBite Max COUPLING 1/2" polybutylene. Mfg #UR514

• Doesn't Require Special Tools, Crimping, Glue Or Soldering.

The 3/4 in. Tectite by Apollo Push-To-Connect Slip Ball Valve is an innovation designed to make a quick repairs or add flow control through a ball valve to rigid Copper or CPVC Pipe. The slip capability allows a section (up to 2 in.) of pipe to be cut out allowing for the easy installation of the ball valve where rigid pipes do not allow movement. Simply insert the slip coupling on to the pipe and using the Tectite by Apollo demount clip (included) to slip the fitting back onto the other end of pipe completing the connection. Great for emergencies and freeze repairs, the Tectite by Apollo Push-To-Connect slip ball valve is the fastest, cleanest and simplest way to add flow control to copper or CPVC pipe without the use of tools, solder, open flame or glue. Fitting removal and reuse is just as simple using a simple demount clip (included). After assembly, valves may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Quarter turn lever handle for simple flow control
• Meets UPC, IPC and cUPC standard requirements and listed by IAPMO and listed to ASSE 1061/NSF 58
• Demount clip allows for valve removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

BrassCraft 3/8 in. FIP Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined, 1-piece brass body construction for strength, durability and long-lasting performance
• 3/8 in. FIP x 3/8 in. OD Comp
• Compatible with iron pipe
• For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115° F. For those applications, use our KT series ball stops.
• Multi-turn operation means water flow control with only a few turns of the handle
• Easy-to-remove handle protects against accidental operation during rough-ins
• One-piece shut-off mechanism provides smooth on-off operation
• Chrome and Brass finish
• For indoor use
• Temperature rating: 40° to 160°F
• Pressure rating: 125 psi maximum
• Designed, machined and assembled in the USA

SharkBite Max CONNECTOR 1/2" X 1/2" MNPT. Mfg #UR120

• Doesn't Require Special Tools, Crimping, Glue Or Soldering.

The 3/4 in. CPVC Slip x Slip Ball Valve is designed for use with hot and cold water. The Ball Valve features CPVC construction and is compatible with CPVC tubing-sized pipes (pipes not included). The valve has a maximum working pressure of 100 psi at 180 degree F and is not meant for use with compressed air.

• CPVC construction
• Compatible with CPVC pipes (sold separately)
• 125 psi maximum pressure
• Working temperature from 40 degree F to 150 degree F
• Suitable for all potable water supply installations
• Beige color

This tamper-proof gas appliance ball valve is made for appliances that use natural gas, manufactured mixed gases, liquefied petroleum, and LP gas-air mixtures. It comes with the following features: This ball valve was made in Italy. It is constructed from forged brass. Its connections are FIP x FIP.

• Forged brass construction
• Chrome-plated brass
• Double O-ring stem seal
• Teflon seats
• Larger port diameter
• Red full lever handle the valve is
• Certified at 1/2 psi at the appliance
• Certified at 5 psi for indoor piping systems
• UL-Listed (Subject 258)
• Made in Italy

The PVC Sch. 40 Ball Valves are used for cold water pressure distribution systems in residential, commercial, agricultural and light industrial applications. This NSF-approved valve features EPDM seats and O-rings and is constructed from durable PVC material. Ideal for applications where space and weight are critical considerations.

• PVC Sch. 40 construction
• Compatible with PVC piping (not included)
• Slip x slip connections
• Add a shut off valve to your sprinkler system, irrigation system or pool
• Maximum pressure of 150 psi at 73 degree F
• Manually operated

The ApolloPEX 1/2 in. Chrome-Plated Brass PEX Barb x 3/8 in. Compression Quarter-Turn Angle Stop Valve is simple to install and provides flow control through a quarter-turn ball valve. Most commonly used at point of use fixtures, it allows for repair and maintenance of fixtures without the need to shut down flow control to the entire system. The 3/8 in. compression outlet provides the capability to install 3/8 in. O.D. tubing or 3/8 in. supply lines. It is designed for use on point of use fixtures such as dishwashers, toilets and faucets. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX valves can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Constructed of chrome-plated lead free dezincification resistant (DZR) brass for superior reliability and strength
• Most economical piping system available
• Quarter-turn handle design for simple flow control
• Compatible with PEX pipe
• Meets UPC, IPC and cUPC standard
• Can be secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
• NSF listed
• Barb x compression connection for PEX plumbing systems
• Rated to 200 degree F and 200 psi

BrassCraft 1/2 in. FIP Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Compatible with iron pipe
• Machined, 1-piece body construction for strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Temperature rating: 40 degree to 140 degree F
• Pressure rating: 125 psi maximum
• No-lead certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1

The ApolloPEX 1 in. Brass PEX Barb Ball Valve is simple to install and provides flow control through an anti-stick and smooth operating quarter turn lever handle. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX valves can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Most economical piping system available
• Quarter-turn lever handle design for simple flow control
• Compatible with PEX pipe
• Meets UPC, IPC and cUPC standard
• Can be secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
• NSF listed
• Barb x barb connection for PEX plumbing systems
• Rated to 200 degree F and 200 psi

The ApolloPEX 1/2 in. Chrome-Plated Brass PEX Barb x 3/8 in. Compression Quarter-Turn Angle Stop Valve is simple to install and provides flow control through a quarter-turn ball valve. Most commonly used at point of use fixtures, it allows for repair and maintenance of fixtures without the need to shut down flow control to the entire system. The 3/8 in. compression outlet provides the capability to install 3/8 in. O.D. tubing or 3/8 in. supply lines. It is designed for use on point of use fixtures such as dishwashers, toilets and faucets. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX valves can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Constructed of chrome-plated lead free dezincification resistant (DZR) brass for superior reliability and strength
• Most economical piping system available
• Compatible with PEX pipe
• Meets UPC, IPC and cUPC standard
• Can secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
• NSF listed
• Barb x compression connection for PEX plumbing systems
• Maximum working pressure of 200 psi and maximum temperature of 200 degree F

This lead free ball valve is forged from bass and includes a lever handle with female connections on both ends. Perfect for residential and commercial use on water, air, steam, oil and gas applications. Designed for minimum pressure drops. Each valve is corrosion resistant.

• Extremely low return rate
• Forged brass body
• Full port
• Quarter-turn operation
• Lead free design is suitable for all potable water supply installations
• Suitable for non-shock operating pressures up to 600 psi
• Threaded end connections conform to ANSI/ASME B1.20.1
• ANSI/ASMEB16.33 for use with natural, manufactured, mixed and liquefied petroleum gases or propane gas and LP gas-air mixtures
• Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position

The Everbilt Lead Free Ball Valve with Drain is constructed of heavy forged brass and has a lever handle with Solder Connections on both ends. Designed for residential and commercial use on water air, steam, oil or gas. Full port for maximum flow and minimum pressure drops. This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.

• Extremely low return rate
• Forged brass construction
• Lead free design is suitable for all potable water supply installations
• Easy quarter-turn operation
• Suitable for oil, water and gas
• Side tap allows non-pressure side to be drained when valve is in the closed position
• 1-year limited warranty

• Forged brass body
• Chrome plated brass ball
• Rubber Buna-N-seats
• Blue lever handle is aluminum
• Certified 1/2 psi at the appliance
• Certified 5 psig for indoor piping systems
• For use with natural, manufactured mixed gases, liquified petroleum, and LP gas-air mixtures
• Made in Italy
• Forged brass body
• Chrome plated brass ball
• Rubber Buna-N-seats
• Blue lever handle is aluminum
• Certified 1/2 psi at the appliance
• Certified 5 psig for indoor piping systems
• For use with natural, manufactured mixed gases, liquified petroleum, and LP gas-air mixtures
• Made in Italy

This lead free ball valve is forged from bass and includes a lever handle with female connections on both ends. Perfect for residential and commercial use on water, air, steam, oil and gas applications. Designed for minimum pressure drops. Each valve is corrosion resistant.

• Extremely low return rate
• Forged brass body
• Full port
• Quarter-turn operation
• Lead free design is suitable for all potable water supply installations
• Use of pipe thread sealant or thread tape is recommended for installation
• Threaded end connections conform to ANSI/ASME B1.20.1
• ANSI/ASMEB16.33 for use with natural, manufactured, mixed and liquefied petroleum gases or propane gas and LP gas-air mixtures
• Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position