Searched for "40141700"
Plastic Double-End Extension Tube.Slip Joint Connect. 1-1/2 x 16 in. White plastic.Have Double-ending.
- Extension tube
- Double-end
- 1-1/2 in. . length, 16 in. double split
- White
- Slip joint
- Pipe material ploy
Flanged 1-1/2 in. x Length 8 in. Plastic Sink Tailpiece.No Flexible tube.Color: White.Have cUPC approval.
- Flanged. 1-1/2 in.
- Length: 8 in.
- Sink tailpiece
- White
- Pipe material poly
- Tailpiece type other
Securely connect your dishwasher to a drainage system with the Plastic Branch Tailpiece. Made of durable polypropylene material, it has a maximum working pressure of 10 psi. Features a slip joint or direct connection for a reliable, long-lasting drainage solution. Oatey products have earned the trust of plumbing professionals for over 100 years.
- Used to connect a sink drain with a garbage disposal
- Tailpiece includes required hardware
- Constructed with an impact resistant polypropylene plastic
- Made of durable polypropylene material
- Use to extend the waste connection from your kitchen sink to your drain connection
- 5/8 in. branch connection
- Highly durable and easy to install
- Connects to dishwasher drainage system
- Limited warranty
1-1/2 in. x 12 in. Sink tailpiece. PVC construction. Flanged direct connect.
- Sink tailpiece
- PVC material
- 1-1/2 in. x 12 in.
- CUPC approval
- Flanged direct connect
- White
1-1/2 in. x 8 in. x 3/4 in.Dishwasher Tailpiece.Direct-Connect.Have cUPC approval.PP Material.
- Plastic
- Size with 1-1/2 in. x 8 in.
- With 3/4 in. branch
- White
- Direct connect
- cUPC approval
1-1/2 in. x 16 in. Sink Tailpiece.PP Material.Double-Flange Direct Connect.Sink tailpiece.
- Sink tailpiece
- PP material
- 1-1/2 in. x 16 in.
- Double-flange
- CUPC approval
- White
Its our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the Sealastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.
- No underground joints 1 solid service line from point-to-point with above ground terminations
- No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
- 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
- No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
- IAPMO/UPC/IPC Listed
- Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes
1-1/2 in. PE. Coupling.
- Plastic
- Size with 1-1/2 in.
- Slip joint
- Flexible
- With 6 in. length
- White
Use the 1-1/4 in. x 12 in. Brass Extension Tube for extending the waste connection from your lavatory sink to the drain. It's threaded on both ends for quick installation. The brass construction provides durability, while the chrome plating offers a sleek look. Dearborn is known for providing superior quality plumbing products designed with the plumber in mind.
- Brass construction with a chrome-plated finish
- Extends the waste connection from your lavatory sink to the drain connection
- Threaded on both ends for quick installation
- Maximum working pressure of 15 psi
- For use in tubular drain applications
- Easy installation
1-1/2 in. x 5 in. PP. End Outlet Tee and Tailpiece
- Plastic
- Size with 1-1/2 in.
- With 5 in. length
- White
- With nuts and washers
- cUPC approval
PP material. Direct connect. Adjustable from 11 in. -17 in. CUPC Approved.
- Plastic
- White
- Direct connect
- Adjustable from 11 in. -17 in.
- CUPC approved
- End outlet waste
This product is a great cost saving solution. The price is affordable. It's easy to handle and install with little tools required. The product is wide selection of product choices.
- High quality
- Reliability
- Durability
- Attractive styling
- Wide selection
- Great value
Contains Extension Tube and Slip Joint Connection. Made of PP Material. White in Color. cUPC approved product.
- Extension tube
- 1-1/2 in. x 6 in.
- Slip joint
- PP
- White
- cUPC approval
The 1-1/2 in. x 8 in. tailpiece is a high-quality tailpiece with slip joint. They can be easily connected. The material is safe.
- Slip joint tailpiece
- PP material
- White
- Size: 1-1/2 in. x 8 in.
- cUPC approval
- Direct connect
1-1/4 in. x 6 in. Extension Tube. Slip Joint Connect. PP Material White Color.
- Durapro slip joint
- PP
- White
- cUPC approval
- 1-1/4 in. x 6 in.
- Extension tube
1-1/2 in. PE. Flexible J-Bend.
- Plastic
- With 1-1/2 in.
- White
- Flexible
- Slip joint connect
- With nuts and washers
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- Durability
- No special tools needed
- Easy to install
- High quality
- Cost saving solution
- Attractive styling
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
- Wide selection
- Great value
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- Fine surface
- No special tool required
- Cost saving solution
- Reliable performance
- Durable construction
- Great buy
End Outlet Waste. Slip Joint Connect. PP Material White Color.
- Outlet waste
- Slip joint
- PP
- White
- 1-1/2 in. x 16 in.
- cUPC approval
PE Material. 1-1/2 in. X 12 in. Flexible Extension Tube.Direct Connect.Have cUPC approval.Easy fitting, high quality.
- PE material
- SIZE: 1-1/2 in. X12 in.
- Flexible extension tube
- Direct connect
- With nut
- With washer
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- Durability
- No special tools needed
- Easy to install
- High quality
- Cost saving solution
- Attractive styling
PE Material. 1-1/4 in. X9 in. Flexible Extension Tube. Slip Joint.
- PE material
- SIZE: 1-1/4 in. X9 in.
- Flexible extension tube
- Slip joint
- With nut
- With washer
The product is well made with great quality. The product is a good buy and is helpful for the user. It's easy to handle and install. The product is wide selection of product choices.
- Fine surface
- Reliability
- Durability
- Attractive styling
- Wide selection
- Great value
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to 250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
1-1/2 in. x16 in. End Outlet Waste. Exclusive Brand products. Combination Direct Connect or Slip Joint.
- End outlet waste
- Exclusive products
- Slip joint
- Pipe material poly
- Size is 1-1/2 in. x 16 in.
- PP
1-1/2 in. x 16 in. Double-End Extension Tube. Slip Joint Connect. PP Material Black Color.
- Double-end extension tube
- 1-1/2 in. x 16 in.
- Slip joint connect
- PP material
- cUPC approval
- Black color
45-Degree Elbow with Slip Joint. White Color in color. Made of PP Material.
- Slip joint elbow
- 45 degree
- PP white
- cUPC approval
- 1-1/2 in.
- White
1-1/2 in. x 12 in. Extension Tube. Slip Joint Connect. PP Material White Color.
- Extension tube type
- Slip joint
- 1-1/2 in. x 12in.
- Polypropylene
- White
- cUPC approval
Plastic Waste Arm.The size is 1-1/2 in. x 15 in.Exclusive Brand products.Have cUPC approval.
- Waste arm
- 1-1/2 in. x 15in.
- Exclusive products
- White
- CUPC approved
- Slip joint extension tube
Its our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the Sealastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.
- No underground joints 1 solid service line from point-to-point with above ground terminations
- No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
- 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
- No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
- IAPMO/UPC/IPC Listed
- Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes
1-1/2 in. x 6 in. Sink Tailpiece. PP Material White Color. Exclusive Brand products from Barnett and The Home Depot.
- Sink tailpiece
- Size 1-1/2 in. x 6 in.
- PP
- White
- CUPC approved
- Direct connect
1-1/2 in. x 16 in. Double Flanged Tailpiece. PP Material Black Color. Exclusive Brand products from Barnett and The Home Depot.
- Double flanged tailpiece
- PP
- Black color
- Exclusive brand
- cUPC approval
- Direct connect
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65°F to +250°F
- Maximum pressure based on 73°F working temperature
- Not for potable water
Typical Application- Use with copper, aluminum and thermoplastic tubing. Not recommended for steel tubing. Fair vibration resistance.
- Use with copper or aluminum tubing
- -65 degree F to +250 degree F temperature range
- Easy to disassemble
- For compression fittings applications
- Meets specifications and standards of ASA, ASME, and SAE
- No flaring tool required
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
This fitting includes a split ring and a stainless steel insert. it is also self-flaring, which means no flaring tool is needed. *MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Threaded to ensure a secure fit
- Withstands up to 150 PSI pressure to deliver optimum performance
- Malleable to allow for customized use
- Compatible with schedule 40 pipe and pipe nipples
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
- 1/2" CTS x 3/4" IPS
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
The product is well made with great quality. The product is a good buy and is helpful for the user. It's easy to handle and install. The product is wide selection of product choices.
- High quality
- Great buy
- Reliability
- Durability
- Attractive styling
- Wide selection
- Self-Flaring Fitting, No Flaring Tool Needed
- Solid Brass Fitting, Stainless Steel Insert
- Includes Split Ring
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Threaded to ensure a secure fit
- Withstands up to 150 PSI pressure to deliver optimum performance
- Underground rated for safety and reliability
- Compatible with schedule 40 pipe and pipe nipples
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Maximum pressure based on 73 degree F working temperature
- Temperature range -65 degree F to +250 degree F
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65°F to +250°F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Maximum pressure based on 73°F working temperature
- Temperature range of -65°F to + 250°F
- Not for potable water
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
- MIP X POLY: 3/4" IPS X 1" CTS
- .090"/.103 SDR/WALL
- 30" Vertical
- 24" Horizon
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Riser Service Head Adapter-Anode-Less Full Flex Riser, 3/4 in. MPT x 3/4 in. IPS, SDR 11 x 96 OAL. It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prebent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.
- No underground joints 1 solid service line from point-to-point with above ground terminations
- No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
- 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
- No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
- IAPMO/UPC/IPC Listed
- Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes