Searched for "40141725"
The Superstrut 1-5/8 in. x 10 ft. Metal Framing Channel can be used for framing and mounting and for constructing load centers and vertical pipe supports. With a gold-galvanized finish and a half-slot construction, the channel can also be used to create a trapeze for conduit and mechanical piping and to support duct and cable trays. The 12-Gauge material can be cut to shorter lengths.
- Used for framing and mounting and for constructing load centers and vertical pipe supports
- Can also be used to create a trapeze for conduit and mechanical piping and to support duct and cable trays
- Gold-galvanized finish
- Designed for use with electrical conduits and mechanical piping
- 12-Gauge, half-slot construction
- Each piece is 10 ft. l
- 1-5/8 in. x 1-5/8 in., 9/16 in. x 1-1/8 in. slots on 2 in. centers
Designed so that the maximum number of support and framing applications can be constructed with a minimum amount of labor and pieces. Channel is made of 14 Gauge, 1-5/8 in. x 13/16 in., by 10 ft. Half Slot Steel with 9/16 in. x 1-1/8 in. Slots on 2 in. Centers.
- 10 ft.
- 14-Gauge
- Slots on 2 in. centers
- Gold
- 1-5/8 in. x 13/16 in.
- Corrosion resistant
Oatey DWV J-Hooks are available in a variety of sizes and provide a fast, economical way to support Schedule 30 and Schedule 40 PVC piping. Made of durable ABS plastic, J-hooks include pre-loaded nails in the stem for easy installation. A diagonal nail path offers flexibility for use in tight spaces, and a locking finger provides a tight hold in inverted applications. Additional holes allow for securing of cable ties and other fasteners. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 3 in. DWV J-hook pipe hanger
- Designed to secure DWV piping
- For use with Schedule 30 and Schedule 40 PVC piping
- Enables the expansion and contraction of pipes
- Made of white ABS plastic
- Fits 3 in. pipes
- 7 in. length
- Pre-loaded nails in stem for easy installation
- Diagonal nail path for use in tight spaces
- Locking finger provides tight hold in inverted applications
- Additional holes allow securing of cable ties and other fasteners
Installing new clips will restore function to old drain assemblies. It is an easy alternative to replacing the bathroom sink drain assembly. Clevis clips help connect the pull rod and stopper allowing for stopper to open and close. These clips are designed to be used on lift type drains/pop-up drain assemblies.
- Made of a durable metal construction
- Designed to be used with a lift type drains/pop-up drain assembly
- Connects pull rod and stopper allowing for stopper to open and close
- Restores function to bathroom sink drain assemblies
- Chrome finish matches most existing fixtures
- Includes (1) small hole clevis clip and (1) large clevis clip
- Easy to install
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- Fine surface
- No special tool required
- Durability
- Style is attracting
- Wide selection
- Great value
The product is well made with great quality. The product is a good buy and is helpful for the user. It's easy to handle and install. The product is wide selection of product choices.
- Style is attracting
- Friendly use
- Easy installation
- High quality
- Wide selection
- Great value
The Danco 1-3/4 in. kitchen sink hole cover is used to cover unsightly holes in the sink when the spray head or soap dispenser is not in use. This sink hole plug features a 3 in. threaded shank design and a 1-3/4 in. O.D. flange cover that requires no tools to install (only silicone caulk is needed to create a watertight seal). The design of this faucet hole cover fits most standard size kitchen sink holes. The stylish finish will compliment your existing fixtures and the durable plastic construction is resistant to rust providing a long last performance.
- DISCREETLY COVER SINK HOLES: Brushed Nickel finish provides a stylish look to the sink plug in order to hide extra kitchen sink holes that are no longer needed from the spray head or soap dispenser
- RUST RESISTANT: Easy to install with no tools required, rust resistant quality provides long lasting performance in your kitchen sink with your kitchen fixtures
- EXTRA DEFENSE: Removed post style basket with kitchen sink hole cover catches unwanted debris
- DIMENSIONS: 3 in. long shank x 1-3/4 in. outer diameter flange - threaded 1/2 in. shank design
- STYLISH DESIGN: Smooth flange cover in brushed nickel finish provides an aesthetic that will match your current kitchen appliances
- Installation tip: to install, the only tool required is silicone caulk - place silicone caulk on the underside of the faucet hole cover and tighten the putty cup and shank nut underneath the sink to create a watertight seal around the faucet hole
- Brushed Nickel finish provides a stylish look
Oatey Half Clamp Pipe Clamps with Nails are designed for securing copper, PEX and CPVC piping to mounting surfaces. Made of corrosion resistant polypropylene, these pipe support clamps feature a pre-loaded, rust resistant nail for easy installation and a ribbed design for noise reduction. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 1/2 in. half pipe clamp with nail
- Ideal for securing tubes to mounting surfaces
- For use with copper, PEX and CPVC piping
- Pre-loaded, rust resistant nail provides fast and easy installation
- Ribbed design insulates against water line noise
- Fits 1/2 in. pipes
- Made of corrosion resistant polypropylene
- Can be used on hydronic systems
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Coated steel
- 30-Gauge steel
- Bolt holes
- 0.75 W
- 10 ft. coil
- Made in Pennsylvania
The Danco 1-3/4 in. kitchen sink hole cover is used to cover unsightly holes in the sink when the spray head or soap dispenser is not in use. This sink hole plug features a 3 in. threaded shank design and a 1-3/4 in. O.D. flange cover that requires no tools to install (only silicone caulk is needed to create a watertight seal). The design of this faucet hole cover fits most standard size kitchen sink holes. The stylish finish will compliment your existing fixtures and the durable plastic construction is resistant to rust providing a long last performance.
- DISCREETLY COVER SINK HOLES: Chrome finish provides a stylish look to the sink plug in order to hide extra kitchen sink holes that are no longer needed from the spray head or soap dispenser
- RUST RESISTANT: Easy to install with no tools required, rust resistant quality provides long lasting performance in your kitchen sink with your kitchen fixtures
- EXTRA DEFENSE: Removed post style basket with kitchen sink hole cover catches unwanted debris
- DIMENSIONS: 3 in. long shank x 1-3/4 in. outer diameter flange - threaded 1/2 in. shank design
- STYLISH DESIGN: Smooth flange cover in chrome finish provides an aesthetic that will match your current kitchen appliances
- Installation tip: to install, the only tool required is silicone caulk - place silicone caulk on the underside of the faucet hole cover and tighten the putty cup and shank nut underneath the sink to create a watertight seal around the faucet hole
- Chrome finish provides a stylish look
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- Fashion design
- User friendly
- Easy installation
- Durability
- Wide selection
- No special tool required
2 hole pipe straps used to attach vertical or horizontal runs of PVC or iron pipe. Snap on feature facilities fast and easy installation. The strap is constructed of galvanized steel. Manufactured in Pennsylvania.
- Galvanized steel material
- Snap on feature facilities fast and easy installation
- For 3/4 in. IPS
- 3/4 in. W
- 22gauge steel
- Made in Pennsylvania
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 28-Gauge steel
- Alternating bolt holes and nail holes
- 0.75 wide
- 40# maximum static working load
- Easily cut to desired length
Popularly known as the Greenfied hanger, this plastic coated DWV hanger supports runs of PVC or pipe. Manufactured in sizes from 1.5 in. to 6 in. IPS. Key hole fastener allows for easy installation. 12 in. perforated leg facilitates installation of pitched pipe runs. Manufactured in Pennsylvania by Greenfield Manufacturing.
- Plastic coated
- Galvanized steel material
- 16 ga steel
- 3/4 in. W
- AKA greenfield hanger
- Made in Pennsylvania
Light duty Clevis for 2 in. pipe. Made of steel with a clack finish. Has a maximum load of 250 lbs.
- Light-duty clevis
- Pipe size 2 in.
- Maximum load 250 lbs.
- Black finish steel
- Hanger
- Superstrut
Super Strut Hanger Extension Ring. Designed to be used with in pipe. Black Finish made of Malleable Iron.
- Extension ring
- Pipe size 3/4 in.
- Black finish
- Malleable iron
- Hanger
- Super strut
Oatey Metal Hanger Straps are available in a variety of lengths and offer a quick and inexpensive way to hang pipe from joists or rafters. Made of durable metal and galvanized steel, these hanger straps are corrosion resistant and feature alternating 1/4 in. and 1/2 in. nail holes for easy installation. Use as a pipe hanger, conduit and duct hanger, tubing strap, utility strap and more. Oatey products have earned the trust of plumbing professionals for over 100 years.
- Metal hanger strap
- For supporting pipe in vertical or horizontal applications
- Made of 28-gauge galvanized steel
- For use with PVC, ABS, galvanized, black iron and cast iron piping
- 3/4 in. width, 100 ft. length
- Strap features alternating 1/4 in. and 1/2 in. diameter nail holes
- Rigorously tested and proven to last in many conditions
- Flexible and easy to work with
Popularly known as the Greenfied hanger, this plastic coated DWV hanger supports runs of PVC or pipe. Manufactured in sizes from 1.5 in. to 6 in. IPS. Key hole fastener allows for easy installation. 12 in. Perforated leg facilitates installation of pitched pipe runs.
- Galvanized steel material
- 16-Gauge steel
- 3/4 in. wide
- Plastic coated
- For 3 in. iron pipe size
- Also available without plastic coating
Split ring hangers for offset pipe runs. Off set determined by length of rod used in installation (sold separately). Usually installed with flange plate (also sold separately).
- Ductile iron construction
- Zinc plated finish
- 1.25 in. pipe
- Use with 3/8 in. threaded rod
- For offset installations
- Comes in other sizes
2 hole pipe straps used to attach vertical or horizontal runs of PVC or iron pipe. Snap on feature facilities fast and easy installation. The strap is constructed of galvanized steel. Manufactured in Pennsylvania.
- Galvanized steel material
- Snap on feature facilities fast and easy installation
- For 2 in. IPS
- 1.0 in. W
- 19-Gauge steel
- Made in Pennsylvania
Oatey Stand-Off Full Pipe Clamps are designed to secure copper, PEX or CPVC tubing to a mounting surface. Made of durable polypropylene, each clamp features a pre-loaded nail for fast and easy installation. The full clamp design completely encompasses the entire pipe while isolating it from the stud and reducing noise. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 3/4 in. full pipe clamp with nail
- For use with copper, CPVC and PEX piping
- Pre-loaded nail provides fast and easy installation
- Clamp isolates pipe from stud and reduces noise
- Made of high-impact polypropylene
- Fits 3/4 in. pipes
- Can be used on hydronic systems
- 0-160°F temperature range
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 24-Gauge steel
- Bolt holes
- 0.75 wide
- 70# max static working load
Support copper runs with perforated metal hanger strap. This durable, copper plated steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Copper clad steel
- 24-Gauge steel
- Bolt holes
- 3/4 in. wide
- 70# max static load rating
Hanger is designed to hold pipe in diameter. Made of Black Finish Malleable Iron. Does not have an inlay.
- Hanger
- Extension ring
- Pipe size 1/2 in.
- Black finish
- Malleable iron
- Superstrut
Oatey Copper Tube Straps enable flush mounting of the pipe to the wall, joist and rafters. Made of copper-plated steel, these tube straps are available in a variety of pipe sizes and are designed for use with copper, CPVC and PEX piping systems. Pre-drilled holes allow for fast and easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 2 in. copper tube strap
- Allows pipe to be flush mounted to walls, joists and rafters
- Made of copper-plated steel
- For use with copper, CPVC and PEX piping
- Fits 1/2 in. pipes
- Pre-drilled holes allow for fast screw installation
- For warranty product details, refer to the Oatey Limited Warranty document
2 hole pipe straps used to attach vertical or horizontal runs of PVC or iron pipe. Snap on feature facilities fast and easy installation. The strap is constructed of galvanized steel. Manufactured in Pennsylvania.
- Galvanized steel material
- Snap on feature facilities fast and easy installation
- For 1.5 in. IPS
- 1.0 in. W
- 19-Gauge steel
- Made in Pennsylvania
Popularly known as the Greenfied hanger, this plastic coated DWV hanger supports runs of PVC or pipe. Manufactured in sizes from 1.5 in. to 6 in. IPS. Key hole fastener allows for easy installation. 12 in. perforated leg facilitates installation of pitched pipe runs.
- Galvanized steel material
- 18-Gauge steel
- 3/4 in. wide
- Plastic coated
- For 2 in. iron pipe size
- Also available uncoated
Oatey Copper and Steel Pipe Hooks are designed to support copper, PVC, CPVC, PEX, galvanized and black iron piping. Available in a variety of sizes, these hooks are self-nailing for easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.
- Steel wire pipe hook
- Supports pipe from rafters or joists
- Fits 3/4 in. pipes
- For use with copper, PVC, CPVC and PEX piping
- 6 in. length
- Self-nailing feature allows for easy installation
- Made of 10-gauge steel
- For warranty product details, refer to the Oatey Limited Warranty document
Oatey Metal Hanger Straps are available in a variety of lengths and offer a quick and inexpensive way to hang pipe from joists or rafters. Made of durable metal and galvanized steel, these hanger straps are corrosion resistant and feature alternating 1/4 in. and 1/2 in. nail holes for easy installation. Use as a pipe hanger, conduit and duct hanger, tubing strap, utility strap and more. Oatey products have earned the trust of plumbing professionals for over 100-years.
- Metal hanger strap
- Used to hang pipe from joists or rafters
- Made of 28-gauge galvanized steel
- For use with PVC, ABS, galvanized, black iron and cast iron piping
- 3/4 in. width, 25 ft. length
- Strap features alternating 1/4 in. and 1/2 in. diameter nail holes
- Rigorously tested and proven to last in many conditions
- Flexible and easy to work with
Super Strut Hanger Extension Ring. Designed to be used with in pipe. Black Finish made of Malleable Iron.
- Hanger
- Pipe size 1 in.
- Black finish
- Malleable iron
- Extension ring
- Super strut
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 20-Gauge steel
- Bolt holes
- 0.75 W
- 10 ft. coil
- Made in Pennsylvania
Durable Polyethylene Construction Grips. Insulates and Isolates the tubing from mounting surface. Tubing Is Not Damaged If Anchor Is Over Driven Keeps The Pipe From The Studs.
- No squeaking
- With barbed nail
- Keeps the pipe from the studs
- 1 year warranty against defect
- Hanger strap
- Galvanized
Elkay extra-long kitchen sink installation clips are constructed from durable metal material. They feature a rust-resistant finish and measure 1 in. tall and 3 in. wide. These clips are designed to make your sink installation easier.
- Install screws are made of a metal material for durability
- Screws have an extra-long design
- Install clips finish is rust-resistant
- Install clips are for use to make sink installation easier
- Bag of 6
- Rust-resistant
- Garbage disposal compatible: most garbage disposal brands, including InSinkErator disposers, can be installed, garbage disposal sold separately
2 hole pipe straps used to attach vertical or horizontal runs of PVC or iron pipe. Snap on feature facilities fast and easy installation. The strap is constructed of galvanized steel. Manufactured in Pennsylvania.
- Galvanized steel material
- Snap on feature facilities fast and easy installation
- For 1 in. IPS
- 3/4 in. W
- 20-Gauge steel
- Made in Pennsylvania
The 3/8 in. Copper Hanger Plate is designed for attaching a rod to a wooden member. This part is designed for use in conjunction with our M-718 Split Ring. This item is crafted of malleable iron with a copper plating.
- Designed for attaching a rod to a wooden member
- Size 3/8 in.
- Flange, ceiling
- Malleable iron
- Copper plating
- Use in conjunction with our M-718 Split Ring
Sioux Chief Zip Stick Universal Pipe Hanger shall be used where necessary to support DWV piping according to all national code requirements. Hanger shall feature I-beam stem design for strength and rigidity and a high heat strap with releasable locking mechanism. Hanger shall be noncorrosive and UV-resistant. Hanger shall be impact resistant to 0 degree F, and be able to withstand temperatures up to 140 degree F. Hanger shall include 2 pre-loaded zinc plated, rust resistant nails. Nails shall have a continuous rink shank to provide a more permanent installation. Hanger stem may be snapped off or cut to create a shorter stem in tight spaces.
- Perfect for hanging DWV
- Perfect for hanging wrapped or insulated pipe
- Perfect for hanging bundles of PEX
- Good for supporting vent pipe in attics
- Releasable locking mechanism
- Graduated numerals at nail ways for easy measuring
Support HVAC or pipe runs with perforated metal hanger strap. One can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 100 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 28-Gauge steel
- 1/4 in. bolt holes
- 0.75 wide
- Easy to cut to length
- Hardware not included
Install the DANCO Snap-In-Style Sink hole to hide unsightly holes in the sink when the spray head or soap dispenser is not in use. This cover will fit all standard sinks. It is designed to snap into place for a quick and easy installation.
- Made of durable stainless steel for strength and reliability
- Stainless steel construction ensures durability without sacrificing style
- Snap-in style fits most standard sinks
- 1-1/4 in. O.D.
- Hides unsightly holes in your sink when the spray head or soap dispenser is not in use
- Covers unused drillings in your sink
- Chrome finish resists corrosion and tarnishing
- Snap-style for quick and easy installation
Calibrated To Give Proper Drainage Fall. Snap-In and Lock Or Can Be Glued To Pipe. Hang items where you want on your wall.
- Includes nails
- Made of ABS plastic
- Packed 10 to a bag.
- 2 years warranty against defect
- J hook
- CTS
Oatey Plastic Hanger Straps are available in a variety of lengths and offer a quick and inexpensive way to hang PVC, ABS, galvanized, black iron or cast iron piping from joists or rafters. Made of durable polyethylene, these hanger straps are both non-corrosive and non-conductive and feature 1/8 in. nail holes spaced 3/4 in. apart for easy installation. Oatey products have earned the trust of plumbing professionals for over 100-years.
- Plastic hanger strap
- Used to hang pipe from joists or rafters
- Made of non-corrosive, non-conductive polyethylene
- For use with copper, PVC, ABS, galvanized, black iron and cast iron piping
- 3/4 in. width, 100 ft. length
- Strap features 1/8 in. nail holes spaced 3/4 in. apart
- Rigorously tested and proven to last in many conditions
- Flexible and easy to work with
Designed for the support of non-insulated copper tubing lines. The MT-718 is furnished tapped for bolt thread and is used with the MT-742-R ceiling plate. Also available in a 2 bolt design.
- Pipe straps, pipe clamps and hangers (series 700)
- Malleable iron
- Copper plated
- Hanger
- Split ring
- Tube size 3/4 in. rod size 7/8 in.
To fix and secure a cable. 1 year limited warranty. Open back design allows installation after a member is placed in position.
- Copper clad
- 2-hole strap
- Product may also be called a strap
- Packed 100 to a bag
- Copper clap strap
- 3/4 in.
The 3/8 in. Black Hanger Plate is crafted of malleable Iron. The item has a black finish. This ceiling flange is intended for use with 3/8 in. threaded rod.
- 3/8 in.
- Malleable iron
- Ceiling flange
- Black finish
- For use with 3/8 in. threaded rod
- Cast
Split ring hangers for offset pipe runs. Off set determined by length of rod used in installation (sold separately). Usually installed with flange plate (also sold separately).
- Ductile iron construction
- Zinc plated finish
- 1.5 in. pipe
- Use with 3/8 in. threaded rod
- For offset installations
- Comes in other sizes
PEXRITE PEX stub-out support 704-H is the 3 minute installation that eliminates in-wall fittings, concealed joints and soldering. The PEXRITE system of pipe supports are designed to provide a secure fit that prevents forward and backward movement, reduce noise and vibration and tighten by hand with ease. Compatible with all PEX tubing.
- PEX turn-out integrates with 103-18-H bracket
- Can be installed directly to stud
- Eliminates in-wall fittings and concealed joints
- Provides 360 degree turning radius when used with 103-18-H bracket
- Compatible with all PEX tubing manufacturers
- Standard/approvals: buy American Act Compliant, IAPMO/IPC/UPC listed
- Reduces noise and vibration
2 hole pipe straps used to attach vertical or horizontal runs of PVC or iron pipe. Snap on feature facilities fast and easy installation. The strap is constructed of galvanized steel. Manufactured in Pennsylvania.
- Galvanized steel material
- Snap on feature facilities fast and easy installation
- For 1/2 in. IPS
- 3/4 in. W
- 22-Gauge steel
- Made in Pennsylvania
The clips are for top mount stainless steel sinks. They fit Premier drop in sinks and sinks using U channel brackets. Youll find the clips with high-quality, durability. Also they are easy installation by hand.
- For above counter sink installations
- with long screws and clips
- For top mount installation of U-channel models
- For counter tops up to 1-1/2 in think
- Good quality and durability
- Easy installation
Sioux Chief Zip Stick Universal Pipe Hanger shall be used where necessary to support DWV piping according to all national code requirements. Hanger shall feature I-beam stem design for strength and rigidity and a high heat strap with a releasable locking mechanism. Hanger shall be noncorrosive and UV-resistant. Hanger shall be impact resistant to 0 degree F, and be able to withstand temperatures up to 140 degree F. Hanger shall include 2 pre-loaded zinc plated, rust resistant nails. Nails shall have a continuous rink shank to provide a more permanent installation. Hanger stem may be snapped off or cut to create a shorter stem in tight spaces.
- Perfect for hanging DWV
- Perfect for hanging wrapped or insulated pipe
- Can be used to hang bundles of PEX, cable or wiring
- Good for supporting vent pipe in attics
- Graduated numeral at nail ways for easy measuring
- Releasable locking mechanism