Searched for "40141725"
Support HVAC or pipe runs with perforated metal hanger strap. One can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 100 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 28-Gauge steel
- 1/4 in. bolt holes
- 0.75 wide
- Easy to cut to length
- Hardware not included
The Superstrut 1-5/8 in. x 10 ft. Metal Framing Channel can be used for framing and mounting and for constructing load centers and vertical pipe supports. With a gold-galvanized finish and a half-slot construction, the channel can also be used to create a trapeze for conduit and mechanical piping and to support duct and cable trays. The 12-Gauge material can be cut to shorter lengths.
- Used for framing and mounting and for constructing load centers and vertical pipe supports
- Can also be used to create a trapeze for conduit and mechanical piping and to support duct and cable trays
- Gold-galvanized finish
- Designed for use with electrical conduits and mechanical piping
- 12-Gauge, half-slot construction
- Each piece is 10 ft. l
- 1-5/8 in. x 1-5/8 in., 9/16 in. x 1-1/8 in. slots on 2 in. centers
Oatey Copper Tube Straps enable flush mounting of the pipe to the wall, joist and rafters. Made of copper-plated steel, these tube straps are available in a variety of pipe sizes and are designed for use with copper, CPVC and PEX piping systems. Pre-drilled holes allow for fast and easy installation. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 2 in. copper tube strap
- Allows pipe to be flush mounted to walls, joists and rafters
- Made of copper-plated steel
- For use with copper, CPVC and PEX piping
- Fits 1/2 in. pipes
- Pre-drilled holes allow for fast screw installation
- For warranty product details, refer to the Oatey Limited Warranty document
2 hole pipe straps used to attach vertical or horizontal runs of PVC or iron pipe. Snap on feature facilities fast and easy installation. The strap is constructed of galvanized steel. Manufactured in Pennsylvania.
- Galvanized steel material
- Snap on feature facilities fast and easy installation
- For 2 in. IPS
- 1.0 in. W
- 19-Gauge steel
- Made in Pennsylvania
Super Strut Hanger Extension Ring. Designed to be used with in pipe. Black Finish made of Malleable Iron.
- Extension ring
- Pipe size 3/4 in.
- Black finish
- Malleable iron
- Hanger
- Super strut
Oatey Stand-Off Full Pipe Clamps are designed to secure copper, PEX or CPVC tubing to a mounting surface. Made of durable polypropylene, each clamp features a pre-loaded nail for fast and easy installation. The full clamp design completely encompasses the entire pipe while isolating it from the stud and reducing noise. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 3/4 in. full pipe clamp with nail
- For use with copper, CPVC and PEX piping
- Pre-loaded nail provides fast and easy installation
- Clamp isolates pipe from stud and reduces noise
- Made of high-impact polypropylene
- Fits 3/4 in. pipes
- Can be used on hydronic systems
- 0-160°F temperature range
This item is designed for the support of non-insulated copper tubing lines. The MT-718 is furnished tapped for bolt thread and is used with the MT-742-R ceiling plate. This is also available in a 2 bolt design.
- Tube size 1 in.
- Rod size 3/8 in.
- Copper plated
- Malleable iron
- Designed for the support of non-insulated copper tubing lines
- Used with the MT-742-R ceiling plate
Oatey Half Clamp Pipe Clamps with Nails are designed for securing copper, PEX and CPVC piping to mounting surfaces. Made of corrosion resistant polypropylene, these pipe support clamps feature a pre-loaded, rust resistant nail for easy installation and a ribbed design for noise reduction. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 1/2 in. half pipe clamp with nail
- Ideal for securing tubes to mounting surfaces
- For use with copper, PEX and CPVC piping
- Pre-loaded, rust resistant nail provides fast and easy installation
- Ribbed design insulates against water line noise
- Fits 1/2 in. pipes
- Made of corrosion resistant polypropylene
- Can be used on hydronic systems
Elkay extra-long kitchen sink installation clips are constructed from durable metal material. They feature a rust-resistant finish and measure 1 in. tall and 3 in. wide. These clips are designed to make your sink installation easier.
- Install screws are made of a metal material for durability
- Screws have an extra-long design
- Install clips finish is rust-resistant
- Install clips are for use to make sink installation easier
- Bag of 6
- Rust-resistant
- Garbage disposal compatible: most garbage disposal brands, including InSinkErator disposers, can be installed, garbage disposal sold separately
Install the DANCO Snap-In-Style Sink hole to hide unsightly holes in the sink when the spray head or soap dispenser is not in use. This cover will fit all standard sinks. It is designed to snap into place for a quick and easy installation.
- Made of durable stainless steel for strength and reliability
- Stainless steel construction ensures durability without sacrificing style
- Snap-in style fits most standard sinks
- 1-1/4 in. O.D.
- Hides unsightly holes in your sink when the spray head or soap dispenser is not in use
- Covers unused drillings in your sink
- Chrome finish resists corrosion and tarnishing
- Snap-style for quick and easy installation
- Danco Sink Clips With Screws
- Durable metal construction
- Designed for use with J or U channel sinks
- Kit contains two styles/sizes of sink clips
- Kit contains (4) two sizes/styles of mounting screws
- Includes extra long screws for thicker countertops
- Used to secure sinks to countertops
- MFG# 10530A
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Coated steel
- 30-Gauge steel
- Bolt holes
- 0.75 W
- 10 ft. coil
- Made in Pennsylvania
The 3/8 in. Black Hanger Plate is crafted of malleable Iron. The item has a black finish. This ceiling flange is intended for use with 3/8 in. threaded rod.
- 3/8 in.
- Malleable iron
- Ceiling flange
- Black finish
- For use with 3/8 in. threaded rod
- Cast
2 hole pipe straps used to attach vertical or horizontal runs of PVC or iron pipe. Snap on feature facilities fast and easy installation. The strap is constructed of galvanized steel. Manufactured in Pennsylvania.
- Galvanized steel material
- Snap on feature facilities fast and easy installation
- For 1 in. IPS
- 3/4 in. W
- 20-Gauge steel
- Made in Pennsylvania
Support HVAC or pipe runs with perforated metal hanger strap. You can hang insulated flexible duct, round pipe or rectangular duct with this perforated strapping. This durable, galvanized steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Galvanized steel material
- 20-Gauge steel
- Bolt holes
- 0.75 W
- 10 ft. coil
- Made in Pennsylvania
Split ring hangers for offset pipe runs. Off set determined by length of rod used in installation (sold separately). Usually installed with flange plate (also sold separately).
- Ductile iron construction
- Zinc plated finish
- 1.5 in. pipe
- Use with 3/8 in. threaded rod
- For offset installations
- Comes in other sizes
Popularly known as the Greenfied hanger, this plastic coated DWV hanger supports runs of PVC or pipe. Manufactured in sizes from 1.5 in. to 6 in. IPS. Key hole fastener allows for easy installation. 12 in. perforated leg facilitates installation of pitched pipe runs. Manufactured in Pennsylvania by Greenfield Manufacturing.
- Plastic coated
- Galvanized steel material
- 16 ga steel
- 3/4 in. W
- AKA greenfield hanger
- Made in Pennsylvania
Support copper runs with perforated metal hanger strap. This durable, copper plated steel strap is easy to install and is 10 ft. L. Easily cut to desired length for a variety of plumbing and HVAC applications.
- Copper clad steel
- 24-Gauge steel
- Bolt holes
- 3/4 in. wide
- 70# max static load rating
Designed so that the maximum number of support and framing applications can be constructed with a minimum amount of labor and pieces. Channel is made of 14 Gauge, 1-5/8 in. x 13/16 in., by 10 ft. Half Slot Steel with 9/16 in. x 1-1/8 in. Slots on 2 in. Centers.
- 10 ft.
- 14-Gauge
- Slots on 2 in. centers
- Gold
- 1-5/8 in. x 13/16 in.
- Corrosion resistant
The Danco 1-3/4 in. kitchen sink hole cover is used to cover unsightly holes in the sink when the spray head or soap dispenser is not in use. This sink hole plug features a 3 in. threaded shank design and a 1-3/4 in. O.D. flange cover that requires no tools to install (only silicone caulk is needed to create a watertight seal). The design of this faucet hole cover fits most standard size kitchen sink holes. The stylish finish will compliment your existing fixtures and the durable plastic construction is resistant to rust providing a long last performance.
- DISCREETLY COVER SINK HOLES: Brushed Nickel finish provides a stylish look to the sink plug in order to hide extra kitchen sink holes that are no longer needed from the spray head or soap dispenser
- RUST RESISTANT: Easy to install with no tools required, rust resistant quality provides long lasting performance in your kitchen sink with your kitchen fixtures
- EXTRA DEFENSE: Removed post style basket with kitchen sink hole cover catches unwanted debris
- DIMENSIONS: 3 in. long shank x 1-3/4 in. outer diameter flange - threaded 1/2 in. shank design
- STYLISH DESIGN: Smooth flange cover in brushed nickel finish provides an aesthetic that will match your current kitchen appliances
- Installation tip: to install, the only tool required is silicone caulk - place silicone caulk on the underside of the faucet hole cover and tighten the putty cup and shank nut underneath the sink to create a watertight seal around the faucet hole
- Brushed Nickel finish provides a stylish look
Sioux Chief Zip Stick Universal Pipe Hanger shall be used where necessary to support DWV piping according to all national code requirements. Hanger shall feature I-beam stem design for strength and rigidity and a high heat strap with a releasable locking mechanism. Hanger shall be noncorrosive and UV-resistant. Hanger shall be impact resistant to 0 degree F, and be able to withstand temperatures up to 140 degree F. Hanger shall include 2 pre-loaded zinc plated, rust resistant nails. Nails shall have a continuous rink shank to provide a more permanent installation. Hanger stem may be snapped off or cut to create a shorter stem in tight spaces.
- Perfect for hanging DWV
- Perfect for hanging wrapped or insulated pipe
- Can be used to hang bundles of PEX, cable or wiring
- Good for supporting vent pipe in attics
- Graduated numeral at nail ways for easy measuring
- Releasable locking mechanism
Split ring hangers for offset pipe runs. Off set determined by length of rod used in installation (sold separately). Usually installed with flange plate (also sold separately).
- Ductile iron construction
- Zinc plated finish
- 1.25 in. pipe
- Use with 3/8 in. threaded rod
- For offset installations
- Comes in other sizes
PEXRITE PEX stub-out support 704-H is the 3 minute installation that eliminates in-wall fittings, concealed joints and soldering. The PEXRITE system of pipe supports are designed to provide a secure fit that prevents forward and backward movement, reduce noise and vibration and tighten by hand with ease. Compatible with all PEX tubing.
- PEX turn-out integrates with 103-18-H bracket
- Can be installed directly to stud
- Eliminates in-wall fittings and concealed joints
- Provides 360 degree turning radius when used with 103-18-H bracket
- Compatible with all PEX tubing manufacturers
- Standard/approvals: buy American Act Compliant, IAPMO/IPC/UPC listed
- Reduces noise and vibration
Calibrated To Give Proper Drainage Fall. Snap-In and Lock Or Can Be Glued To Pipe. Hang items where you want on your wall.
- Includes nails
- Made of ABS plastic
- Packed 10 to a bag.
- 2 years warranty against defect
- J hook
- CTS