Searched for "40142000"
SF3813 Features a heavy-duty all brass holder with a textured grip. The brass cap is a valve core wrench tool. SF3813 comes with (3) valve cores. The valve cores are stainless steel and brass and are rated for CFC, HCFC and HFC refrigerants. The cores are pressure rated for R410A and manufactured to ARI 720-97 standard.
- Holds 3 cores
- Brass construction
- 3 in. L
- Cores manufactured per ARI 720-97
Kobra secure seal 60 in. hose three pack, black, yellow and red hoses. 800 psi working; 400 psi burst. UL R410A approved Secure Seal, specially designed to lock refrigerant inside the hose without the need for a ball valve attachment.
- Secure seal hose set
- 800 psi working pressure
- 4000 psi burst
- UL R410A approved
- Field repairable
Kobra series gasket seal quarter-turn ball valve hose set.Includes 3/8 in. black hose 1/4 in. x 1/4 in. with ball valve.Meets non-venting requirements by trapping refrigerant with ball valve.
- 60 in. ball valve hose set B/Y/R and 3/8 in. black hose
- Kobra gasket seal quarter-turn
- Meets non-venting requirement
- 800 psi working, 4000 psi burst
Faster, safer and more economical method for charging LIQUID refrigerant through the low pressure side of an air conditioning or refrigeration system, without damaging the compressor. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Insta-Charge's unique internal restrictor reduces liquid flow to a level below the capacity of the compressor
- Converts liquid refrigerant to a saturated vapor for fast entry
- Insta-charge connects directly to the refrigerant can or cylinder valve
- Adds liquid tracing dye faster
- Eliminates heating or refrigerant cylinder; made of lightweight aluminum
- Sold at a fraction of the cost of other fast charging devices
Gasket replacement part for 1/4 in. quick couplers. Replacement gasket pack of 10. For use with standard hoses.
- Gasket replacement
- 10 pack
- Replacement gasket 1/4 in.
- 1/4 in. gasket
Single 6 in. yellow Kobra high pressure hose CLV-6 series. Whip end with ball valve that opens to full flow. Traps refrigerant discharge in hose.
- 1/4 in. x 6 in. ball valve
- Whip end
- PSI 800/4000 burst
- Traps refrigerant
Core removal tool designed for removing and replacing a in. Schrader in. type core without losing the charge. All brass construction. Not compatible with R-410A.
- Brass construction
- Not compatible with R-410A
- Designed for removing and replacing a Schrader type core without losing the charge
- Made in China
- 1" Length
- For 1/4" rubber hose. Ferrule reference # 7328. Hole Size (pierce) .437". Ferrule Inside diameter .656"
- Cut hose cleanly and squarely to length
- Barb size is hose I.D.
- Excellent vibration resistance
- Temperature and Working Pressure Ranges From -40°F to +160°F at 150 Maximum PSI
Specifically designed to valve off the system to remove valve cores. Features a quarter turn ball valve shut-off fitting and O-ring seals. The valve core can be completely removed and replaced without losing system charge. Speed up evacuation, recovery or recharging time through the full flow port. Storage area houses spare valve cores.
- Core removal tool with port
- Quarter turn ball valve shutoff
- Quick connect 5/16 in., flare run 1/4 in., side port 1/4 in.
- Vacuum rated to 20 microns
Kobra Gasket seal quarter-turn ball valve hose.Meets non-vending requirements by trapping refrigerant.Ball valve with 1/4" turn.
- Meets non-venting requirements by trapping refrigerate
- Ball valve
- 800 psi working
- 4000 psi burst
When you choose this lead-free compression fitting for your project, you'll have the benefit of a fitting that is manufactured to the highest standards and tolerances. It is an excellent choice for gasoline, grease, oil, water, vacuum and air lines can be installed quickly and efficiently by both homeowners and contractors alike. The strong, durable brass construction ensures that you're choosing a superior fitting for your project.
- Durable
- Lead-free
- All threads manufactured to highest quality standards and tolerances
- Easy to use
- Not for underground use
- Material
Secure Seal Adapter. 1/4 in. QC x 1/4 in. SAE 90 degree. All brass adapter.
- Secure seal adapter
- 1/4 in. QC x 1/4 in. SAE 90 degree
- UL for R410A
- Solid brass
Core Removal Tool with access port. Specifically designed to valve off the system to remove valve cores, this core remover has a access port. The valve core can be completely removed and replaced without losing system charge.
- Removing valve core without losing system charge
- Quick connect 1/4 in., flare run 1/4 in., side port 1/4 in.
- Features a quarter turn ball valve shut-off fitting and o-ring seals
- Speed up evacuation, recovery, or recharging time through the full flow port
This 30 in. hose connector is used to connect Regulators to BBQ Grills, Camp Stoves, Patio Heaters and Other Appliances using LPG. For High or Low pressure. Ready to Install.
- 1/4 in. I.D. hose
- Thermoplastic hose
- 30 in. L
- 350 psi maximum working pressure
- 3/8 in. MNPT x 3/8 in. swivel f flare fittings
- UL listed
When you choose this lead-free compression fitting for your project, you'll have the benefit of a fitting that is manufactured to the highest standards and tolerances. It is an excellent choice for gasoline, grease, oil, water, vacuum and air lines can be installed quickly and efficiently by both homeowners and contractors alike. The strong, durable brass construction ensures that you're choosing a superior fitting for your project.
- Durable
- Lead-free
- All threads manufactured to highest quality standards and tolerances
- Easy to use
- Not for underground use
- Material: brass
CL-72R 1/4 in.' Standard Charging Hose - Red 72 in.. With a pressure rating 750 psi working and 3000 psi burst. Premeation can be detected and will vary with refrigerant type and time of exporure.
- Coated for flexibility and wear resistance
- Knurled brass nut for easy finger tightening
- Color coded for convenience
- Ideal for use with all standard refrigerants (except high pressure refrigerants)
This 60 in. hose connector is used to connect Regulators to BBQ Grills, Camp Stoves, Patio Heaters and Other Appliances using LPG. For High or Low pressure. Ready to Install.
- 1/4 in. I.D. hose
- Thermoplastic hose
- 60 in. L
- 350 psi maximum working pressure
- 3/8 in. MNPT x 3/8 in. swivel f flare fittings
- UL listed
Use with existing charging hose. Immediately traps refrigerant discharge from hose when disconnected from access fitting to reduce loss of refrigerant and prevent in.finger burn in.. Replacement parts available.
- 1/4 in. QC x 1/4 in. SAE
- Secure seal apadter
- UL for R410A
- Solid brass
- Disposer Hose
- Used To Connect Disposer To Air Gap
- Reinforced Pvc Hose
- 1.25 Od X 0.88 Id X 24 In.
- Mfg #301467
Single 60 in. (152 cm) yellow standard charging hose. With a working pressure of 750 psi and 300 psi burst. These charging hoses are ideal for use with standard refrigerants.
- 1/4 in. standard charging hose
- 750 psi
- 3000 psi burst
- Ideal for use with all standard refrigerants
- Except high pressure
- TruZero High Pressure Rubber Hose is designed to meet UL21, CGA, Type1, EN, British-BS and ASTM Standards
- Constructed from high grade aerospace rubber compounds
- Resists wear 50% more than other leading brands
- Superior cold weather flexibility to -65ºF
- Excellent for LPG transportation, bobtail lines, vapor lines, plant use, and most other applications.
Kobra high pressure hoses. Series has gasket seal fitting, the depressor is set to ARI standard for the access valve core, and blow-out resistant depressor and barrel gasket. Pressure rating 800 psi and 4000 psi burst. Suitable for R-410A.
- Gasket seal hose
- High pressure charging hose set suitable for R-410A
- Blow-out resistant gasket locks into cup of fitting
- Barbed depressor to guide the valve core into place
Single 60 in. (152 cm) blue standard charging hose. With a working pressure of 750 psi and 300 psi burst. These charging hoses are ideal for use with standard refrigerants.
- 1/4 in. standard charging hose
- 750 psi working pressure
- 3000 psi burst
- Ideal for use with all standard refrigerant
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 100 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter