Searched for "40142513"
1-1/2"P-Trap with Threaded Adapter. PP Material White Color. Exclusive Brand products from Barnett and The Home Depot.
- P-trap
- With threaded adapter
- PP
- White color
- cUPC approval
- Size: 1-1/2 in.
PE Material. Flexible P-Trap. The size is 1-1/2 in. or 1-1/4 in.In white color. Flexible tube with slip joint.
- P-trap
- Flexible
- PE material
- Size is 1-1/2 in. or 1-1/4 in.
- Prevent P-trap alignment problems
- Flexes to fit under sink
The NIBCO 1-1/2 in. ABS P-Trap is designed to prevent sewer gas from escaping from a plumbing fixture or drain. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.
- Do not use primer with ABS
- Hub x hub connections
- Solvent-welded connections
- NSF/ANSI standard 14
- UL Listed 94V-0
- Maximum working pressure of 5 psi
P-Trap with Threaded Adapter. PP Black. cUPC approval.
- P-trap
- PP
- Black
- Threaded adapter
- Slip joint
- cUPC approval
P-Trap without Threaded Adapter. PP White. cUPC approval.
- P-trap
- 1 1/2 in.
- PP material
- White color
- cUPC approval
- With adapter
P-Trap without Threaded Adapter.PP White.Have cUPC approval.Slip joint connection.
- P-trap
- PP
- White color
- Without adapter
- cUPC approval
- Slip joint
P-Trap 1-1/2 in. PVC slip Joint P trap with Adapter.Mde of PP Material.P-Trap with Threaded Adapter.Have CUPC APPROVED.
- PP material
- Size: 1-1/2 in.
- P-trap
- With adapter
- cUPC approval
- White
The NIBCO 1-1/2 in. PVC DWV P-Trap with union joint is used in residential and commercial drain, waste and vent systems. The PVC DWV P-Trap features a union joint and hub x hub connection. The P-Trap provides a water seal so that wastewater will automatically be trapped in the arc of the configuration, thereby preventing unwanted gases from entering the household environment.
- PVC requires a primer before cementing
- Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
- For use with non-pressurized sanitary systems
- Maximum working pressure of 5 psi
- Hub x hub solvent-welded connections
- Includes union joint
P-Trap with Threaded Adapter. PP Black. cUPC approval.
- pp material
- With adapter
- 1 1/2 in.
- cUPC approval
- Black color
- P-trap
The Fernco 1-1/2 in. x 1-1/4 in. PVC Drain Trap is made of flexible PVC that can adjust to pipe misalignment. The leak-resistant pipe also resists damage from freezing for long-lasting use. Connection type is mechanical.
- Install using a torque wrench for a water tight seal
- Maximum operating temperature of 120 degree F
- 4.3 psi maximum test pressure
- Flexible PVC coupling with 300 series stainless steel clamps
- Designed for 1-1/4 in. sink drain and can be cut to fit 1-1/2 in. sink drain
- Fast and easy installation
The product is well made with great quality. The product is a good buy and is helpful for the user. It's easy to handle and install. The product is wide selection of product choices.
- High quality
- Reliability
- Durability
- Attractive styling
- Wide selection
- Great value
The product is well made with great quality. The product is a good buy and is helpful for the user. It's easy to handle and install. The product is wide selection of product choices.
- Fine surface
- Reliability
- Durability
- Attractive styling
- Wide selection
- Great value
PVC P-Trap with adapter. Used in residential and commercial drain, waste and vent systems. Size in 1-1/2 inch. Have cUPC approval.
- P-trap
- With adapter
- 1-1/2 inch
- PVC material
- cUPC approval
Polypropylene for Corrosion Resistance, White. Zinc Faceplate with Trip Lever. Plastic Linkage and Plunger. Zinc Drain Spud. cUPC approval.
- PP
- Zinc faceplate with trip lever
- Zinc drain spud
- Plastic linkage and plunger
- cUPC approval
- Light-duty
P-Trap. PP White. 1-1/4 in. X 1-1/2 in. cUPC approval.
- P-trap
- Plastic
- White
- 1-1/4 in.
- 1-1/2 in.
- cUPC approval
Chrome plated utility P-trap with clean out and Milwaukee style wall tube. 1-1/2 in. 17-Gauge brass, clean out and ground joint connection. Includes 10 in. long Milwaukee style utility wall arm with 1-1/2 in. NPT threaded end for connection to stub out. Includes deep flange and all necessary nuts and washers.
- Utility P-trap with clean out
- Inlet: 1-1/2 in., outlet: 1-1/2 in.
- With deep flange
- Polished chrome
- 17-Gauge brass
- Includes nuts and washers
- Ground joint connection
- Milwaukee style
The NIBCO 1-1/2 in. ABS DWV Trap SPG x SJ Street Adapter is used in a non-pressurized sanitary system to adapt a fitting hub to a tubular trap at the floor or wall. Drain, Waste and Vent (DWV) allows removal of waste water and water-borne waste away from appliances and fixtures. ABS is lightweight, safe to handle and easy to install.
- 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
- ABS plastic material
- For above-ground DWV
- ABS solvent welds to fitting hub and incorporates slip joint for tubular traps
- Do not use primer with ABS
- NSF/ANSI Standard 14
- UL Listed 94V-0
- "11/2 I.D. and 1.625 O.D."
The NIBCO PVC DWV P-Trap with cleanout and plug is used in residential and commercial drain, waste and vent systems. This P-Trap features a hub x hub x cleanout with plug connection to provide a means for clearing potential clogs. The p-trap provides a water seal so that wastewater will automatically be trapped in the arc of the fitting, thereby preventing unwanted gases from entering the house.
- 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
- PVC requires a primer before cementing
- Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
- For use with a non-pressurized sanitary system
- Hub x hub x cleanout solvent-welded connections
- Maximum working pressure of 5 psi
- NSF/ANSI Standard 14
KEENEY 305CPBNDF P-Trap is designed to prevent sewer gas from escaping from a plumbing fixture or drain. It has a 1.5 in. or 1.25 in. inlet with the included reducing washer and comes in a decorative polished chrome finish for a high luster appearance in exposed installations. The durable 17-Gauge brass construction offers long-lasting use. An included deep flange with a matching finish completes the look. This product includes all necessary nuts and washers for installation. You can install with confidence knowing KEENEY stands by its products with a Limited Warranty.
- Brass P-trap without cleanout
- Inlet: 1-1/2 in. or 1-1/4 in.
- Outlet: 1-1/2 in.
- Durable 17-Gauge brass tubing
- Chrome plated finish
- Includes deep flange, brass nuts, and TPR washers
Watco® Lift And Turn Tub Drain Assembly. Chrome Finish. Coarse Thread. 1.865" Od X 11.5" Threads. 1.25" Strainer Body Depth. Mfg #58305-CP
- Chrome Finish
- Coarse Thread
- 1.865" Od X 11.5" Threads
- 1.25" Strainer Body Depth
Help prevent sewer gas from escaping by installing the NIBCO 1-1/2 in. ABS DWV Hub x Hub P-Trap under the discharge of a plumbing fixture or drain. The p-trap features hub x hub connections. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings.
- ABS requires no primer
- Use under the discharge of a plumbing fixture or drain to help prevent sewer gas from escaping
- For use with non-pressurized sanitary systems
- Maximum working pressure of 5 psi
- Hub x hub solvent-welded connections
- NSF/ANSI standard 14
- UL Listed 94V-0
The NIBCO 3 in. PVC DWV Hub x Hub P-Trap. DWV is used for non pressurized sanitary system Drain, Waste, and Vent. There are 2 types of DWV plastic: ABS (black plastic) and PVC (white plastic). The sanitary drainage and vent piping are installed to remove waste water and water-borne wastes from the plumbing fixtures and appliances. DWV also provides a circulation of air within the drainage piping. ABS (black) and PVC (white) plastic pipe and fittings have identical uses.
- Used under discharge of a plumbing fixture or drain to prevent sewer gas from escaping
- Solvent welded connections
- PVC requires a primer before cementing
- Maximum service temperature 140 degree F
- ASTM D2665 and D3312
- NSF/ANSI standard 15
- UL Listed 94V-1
- NSF U.P. certified
The product is well made with great quality. The product is a good buy and is helpful for the user. It's easy to handle and install. The product is wide selection of product choices.
- High quality
- Reliability
- Durability
- Attractive styling
- Wide selection
- Great value
The NIBCO 1-1/2 in. x 1-1/4 in. ABS DWV SPG x SJ Street Trap Adapter is used in a non-pressurized sanitary system to adapt a fitting hub to a tubular trap at the floor or wall. Drain, Waste and Vent (DWV) allows removal of waste water and water-borne waste away from appliances and fixtures. ABS is lightweight, safe to handle and easy to install.
- 11/2 X 11/4 in. Inside Diameter and 1 5/8 X 1 3/8 in. Outside Diameter
- ABS plastic material
- For above-ground DWV
- ABS solvent welds to fitting hub and incorporates slip joint for tubular traps
- Do not use primer with ABS
- NSF/ANSI Standard 14
- UL Listed 94V-0
- "11/2 X 11/4 I.D. and 1 5/8 X 1 3/8 O.D."