Searched for "40172500"
The 3/4 in. Tectite by Apollo Push-To-Connect cap is the fastest, cleanest and simplest way to cap copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 61
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
This 5/8 in. OD flare x 1/2 in. MIP tapped 3/8 in. FIP gas connector adapter is constructed of zinc plated carbon steel. It is approved and design certified by CSA for use with natural, manufactured, mixed liquefied petroleum gases, and LP gas-air mixtures. Quality flared end adapter creates a metal to metal seal to ensure integrity in critical applications.
- Approved for indoor and outdoor use
- Easy to install
- Zinc plated carbon steel
- 100 % factory leak tested
Connects Any Combination Of Cast Iron, Plastic, Copper, Steel Or Lead. Size: 1-1/2" X 1-1/2".
The 3/4 in. SharkBite Push-to-connect End stop is the easiest way to cap copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Perfect solution for pressure testing a home and they are reusable. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.
- Lead free DZR brass construction for durability and reliability
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions, or tools
- Rated to 200F and 400 PSI
- Meets all UPC, IPC and cUPC requirements
The 1/2 in. Tectite by Apollo Push-To-Connect cap is the fastest, cleanest and simplest way to cap copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 61
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
This 5/8 in. OD, 1/2 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 in. MIP x 1/2 in. FIP adapters and is 24 in. L. Designed for outdoor, above ground use, this gas connector is a safe and easy alternative to typical copper or polyethylene connectors for the connection of propane tanks. Provided with a hot-dipped, heavy duty gray PVC coating, this connector is rated to 15 psiG and can be connected to industry standard 5/8 in. propane fittings.
- Designed, tested and suitable for outdoor LP gas riser connections
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested
The 1 in. Tectite by Apollo Push-To-Connect cap is the fastest, cleanest and simplest way to cap copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.
- Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
- Push-to-connect joints require no heat, solder, solvents or tools
- Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
- Fittings can be rotated after being installed for ease of use in tight spaces
- Ideal for potable water and hydronic heating applications
- Listed by IAPMO and listed to ASSE 1061/NSF 61
- Meets UPC, IPC and cUPC standard requirements
- Demount clip allows for fitting removal (sold separately)
- Approved for behind-the-wall with no access and burial
- Corrosion resistant for greater longevity
- Maximum working pressure of 200 psi and maximum temperature of 250 degree F
This 5/8 in. OD, 1/2 in. ID, durable, corrosion-resistant stainless steel gas connector is configured with 3/4 in. FIP x 3/4 in. FIP adapters and is 48 in. L. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas ranges and gas furnaces. This gas connector is 100 % leak tested.
- Designed and certified by CSA for indoor and outdoor use
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested
This 5/8 in. OD, 1/2 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 3/4 in. FIP x 3/4 in. FIP adapters and is 72 in. L. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas ranges and furnaces. This gas connector is 100 % leak tested.
- Designed and certified by CSA for indoor and outdoor use
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested
- Clay To Cast Iron Or Plastic
- Stainless Steel Clamps
This 3/8 in. OD, 1/4 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 3/8 in. MIP x 3/8 in. FIP adapters and is 48 in. L. Designed with safety in mind, this CSA approved gas connector is yellow coated. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as space heaters and wall heaters.
- Designed and certified by CSA for indoor and outdoor use
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested
This 1/2 in. OD, 3/8 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 in. MIP x 1/2 in. MIP adapters and is 36 in. L. Designed with safety in mind, this CSA approved gas connector is yellow coated. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas dryers and water heaters.
- Designed and certified by CSA for indoor and outdoor use
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested
This 5/8 in. OD, 1/2 in. ID, durable, corrosion-resistant stainless steel gas connector is configured with 3/4 in. MIP x 3/4 in. FIP adapters and is 24 in. L. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas ranges and gas furnaces. This gas connector is 100 % leak tested.
- Designed and certified by CSA for indoor and outdoor use
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested
This 1/2 in. OD, 3/8 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 in. MIP x 1/2 in. FIP adapters and is 48 in. L. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas dryers and water heaters. This gas connector is 100 % leak tested.
- Designed and certified by CSA for indoor and outdoor use
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested
This 1/2 in. OD, 3/8 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 in. MIP x 1/2 in. FIP adapters and is 36 in. L. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas dryers and water heaters. This gas connector is 100 % leak tested.
- Designed and certified by CSA for indoor and outdoor use
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested
This 3/8 in. OD, 1/4 in. ID, durable corrosion resistant stainless steel gas connector is configured with 1/2 in. MIP x 1/2 in. FIP and is 72 in. L. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas log sets and space heaters. This gas connector is 100 % leak tested.
- Designed and certified by CSA for indoor and outdoor use
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested
This 5/8 in. OD, 1/2 in. ID, durable, corrosion-resistant stainless steel gas connector is configured with 1/2 in. FIP x 1/2 in. FIP adapters and is 48 in. L. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas ranges and gas furnaces. This gas connector is 100 % leak tested.
- Designed and certified by CSA for indoor and outdoor use
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested
This 3/8 in. OD, 1/4 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 in. MIP x 1/2 in. FIP adapters and is 36 in. L. Designed with safety in mind, this CSA approved gas connector is yellow coated. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as space heaters and wall heaters.
- Designed and certified by CSA for indoor and outdoor use
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested
This 1/2 in. OD, 3/8 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 in. MIP x 1/2 in. FIP adapters and is 36 in. in length. With a durable pre-applied high temperature black coating, the gas connector provides a low-visibility gas connector installation. Designed with safety in mind, this CSA approved gas connector is commonly used for the installation of home appliances such as gas log sets, fireplace inserts, and freestanding fireplaces.
- Designed and certified by CSA for indoor and outdoor use
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested
- Hi-temperature black polymer coating hides the connector from view
- Maximum temperature rating is 350 degree F
This 5/8 in. OD, 1/2 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 in. MIP x 1/2 in. MIP adapters and is 48 in. L. Designed with safety in mind, this CSA approved gas connector is yellow coated. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas ranges and furnaces.
- Designed and certified by CSA for indoor and outdoor use
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested
This 5/8 in. OD, 1/2 in. ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 in. MIP x 1/2 in. MIP adapters and is 60 in. L. Designed with safety in mind, this CSA approved gas connector is yellow coated. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas ranges and furnaces.
- Designed and certified by CSA for indoor and outdoor use
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested
This 1/2 in. ID push-to-connect quick disconnect coupling is designed specifically to connect and disconnect moveable equipment used in the foodservice industry. This coupling contains a thermal shutoff feature which is a polymer ring located inside the nipple that will melt and close the gas supply valve if the temperature rises above 350 degree F. The push to connect feature allows the coupling's components to be joined quickly by simply pushing them together until they snap into place eliminating the need to hold or slide the operating ring.
- CSA certified
- Designed specifically for the foodservice industry
- Internal thermal shutoff feature
- Push to connect technology
This 5/8 in. OD, 1/2 in. ID, durable, corrosion-resistant stainless steel gas connector is configured with 1/2 in. FIP x 1/2 in. FIP adapters and is 24 in. L. Designed with safety in mind, this CSA approved gas connector is yellow coated. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas ranges and furnaces.
- Designed and certified by CSA for indoor and outdoor use
- Durable and corrosion resistant
- 304 stainless steel
- 100 % factory leak tested