The NIBCO 3 in. PVC DWV 90 degree Hub x Hub Elbow is designed for use with DWV systems to help remove wastewater from plumbing fixtures. The fitting features a PVC construction that requires a primer before solvent cementing. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Solvent weld connections
• Apply a primer to the PVC before cementing
• Maximum working pressure of 5 psi

Complete the installation of your non-pressurized drain, waste and vent system with the NIBCO 2 in. PVC DWV 45 degree Spigot x Hub Street Elbow. This PVC fitting changes the direction of piping 45 degree .

• PVC construction
• For use with non-pressurized drain, waste and vent systems to help remove wastewater from plumbing fixtures
• Solvent welded connections
• Apply a primer to the PVC before cementing
• Maximum working pressure of 5 psi

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega Smart Connect makes secure connection in less than 7 seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

The 3/4 in. SharkBite Push-to-Connect Elbow allows you to make a 90 connection to any combination of 3/4 in. Copper, CPVC or PEX Pipe. SharkBite fittings are the easiest way to join pipe and do not require soldering, clamps, unions, glue or tools to complete the job. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions, or tools
• Rated to 200F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

Install the NIBCO 3 in. PVC DWV 45 degree Spigot x Hub Street Elbow to help remove wastewater from plumbing fixtures and appliances. This durable plastic elbow provides air circulation within piping and is designed for use in non-pressurized sanitary system DWV applications. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC plastic construction
• Changes the direction of piping by 45 degree
• Suitable for use in non-pressurized sanitary system DWV applications
• Provides air circulation within piping
• (1) 3 in. spigot connection and one 3 in. hub connection
• Solvent-welded connections
• Requires a primer (sold separately) before cementing
• 5 psi maximum working pressure

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega Smart Connect makes secure connection in less than 7 seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

Use the NIBCO 3 in. PVC DWV 90 degree Spigot x Hub Street Elbow with your DWV system to help remove wastewater from plumbing fixtures. The fitting features a PVC construction that requires a primer before solvent cementing. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC construction
• For use with DWV systems to help remove wastewater from plumbing systems
• Helps air circulate in drainage piping
• Changes the direction of PVC piping 90 degree
• Solvent weld connections
• Apply a primer to the PVC before cementing
• Maximum working pressure of 5 psi

Use the NIBCO 4 in. PVC DWV 45 degree Spigot x Hub Street Elbow to help complete the installation of your DWV system. The fitting features a PVC construction that requires a primer before solvent cementing. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC construction
• For use with DWV systems to help remove wastewater from plumbing fixtures
• Helps air circulate in drainage piping
• Changes the direction of piping 45 degree
• Solvent weld connections
• Apply a primer to the PVC before cementing

The 3/4 in. Tectite by Apollo Push-To-Connect Elbow is the fastest, cleanest and simplest way to create a 90 joint of any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 64
• Meets UPC, IPC and cUPC standard requirements
• Demount clip allows for fitting removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The 1/2 in. SharkBite Push-to-Connect x MNPT Adapter allows you to make a 90 connection to 1/2 in. pipe using a Push-to-Connect connection on 1 end and gives you a 1/2 in. Male NPT Adapter on the opposite end. SharkBite fittings are the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions, or tools
• Rated to 200 ° F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega Smart Connect makes secure connection in less than 7 seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

The 1/2 in. Tectite by Apollo Push-To-Connect Elbow is the fastest, cleanest and simplest way to create a 90 joint of any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 64
• Meets UPC, IPC and cUPC standard requirements
• Demount clip allows for fitting removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega smart connect makes secure connection in less than 7-seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux, or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

The 1/2 in. SharkBite Push-to-Connect x Female Pipe Thread 90 ° Drop Ear Elbow allows you to make a 90 ° connection to 1/2 in. pipe using a push-fit connection on one end and gives you a 1/2 in. Female NPT Adapter on the opposite end. The drop-ear allows the fitting to be screwed down to secure the joint and hold firmly in place. SharkBite fittings are the easiest way to join copper, PE-RT, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions, or tools
• Certified as a manufactured joint and for underground and behind-the-wall applications without access panels
• Rated to 200 ° F and 400 PSI

The 3/4 in. x 1/2 in. SharkBite Push-to-Connect Elbow allows you to make a 90 connection to 3/4 in. pipe and reduce down to a 1/2 in. pipe. SharkBite Fittings can be used with any combination of Copper, CPVC or PEX Pipe. SharkBite fittings are the easiest way to join pipe and do not require soldering, clamps, unions, glue or tools to complete the job. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Rated to 200 ° F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

The 1/2 in. SharkBite Push-to-Connect Elbow allows you to make a 90 connection to any combination of 1/2 in. Copper, CPVC or PEX Pipe. SharkBite fittings are the easiest way to join pipe and do not require soldering, clamps, unions, glue or tools to complete the job. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions, or tools
• Rated to 200F and 200 psi
• Meets all UPC, IPC and cUPC requirements

The NIBCO 1-1/2 in. PVC DWV 22-1/2- street elbow features a spigot x hub connection and is used to change the direction of flow. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• Changes direction of PVC piping 22-1/2 degree from a fitting hub to PVC pipe size
• Solvent welded connections
• PVC requires a primer before cementing
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F
• NSF/ANSI standard 14
• UL Listed 94V-0

Securely connect tubes with the ProPress copper 45degree street elbow. Designed for use with ASTM B88 and B75 copper tubing, street elbows allow for more convenient connection options in tight situations. Press connections make installing this 5degree street elbow quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega Prepress street elbows install in just four easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth and use a press tool to connect the Viega Prepress street elbow for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included) and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega Prepress street elbows are the top choice of professionals around the globe.

• Install ProPress street elbows up to 60% faster than soldering
• Press street elbow quickly repairs connections, wet or dry
• Designed for use with ¾ in. ASTM B88 and B75 tubing, not compatible with PEX
• Compatible systems include potable water, hydronics and more
• Installs in 7-seconds or less with a press tool, no flame, solder or flux required
• Viega smart connect technology helps installers identify unpressed fittings
• Press technology eliminates the need for burn permits or fire watch
• Wet or dry connections allow quick repairs on existing systems
• Durable internal EPDM rubber seals for watertight connections
• Rated for 0°F to 250°F, up to 300 psi for water applications
• Zero lead solution certified under NSF-61-385
• Reliability guaranteed by 50-year limited warranty

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• No flame, solder, flux, or heavy equipment needed
• Compatible systems include potable water, hydronics and more
• Installs in 7 seconds or less with a press tool - no flame, solder or flux required
• Viega Smart Connect technology helps installers identify unpressed fittings
• Press technology eliminates the need for burn permits or fire watch
• Wet or dry connections allow quick repairs on existing systems
• Durable internal EPDM rubber seals for watertight connections
• Rated for 0-250ºF, up to 300 PSI for water applications
• Zero Lead solution certified under NSF-61-382
• Reliability guaranteed by 50-year limited warranty

Securely connect tubes with the ProPress copper 45degree street elbow. Designed for use with ASTM B88 and B75 copper tubing, street elbows allow for more convenient connection options in tight situations. Press connections make installing this 5degree street elbow quick and efficient. Unlike traditional pipe fittings, there's no need for calibration, flame or heavy equipment. Instead, Viega Prepress street elbows install in just four easy steps: cut the copper tube to length, remove any burrs and surface imperfections, measure and mark the fitting insertion depth and use a press tool to connect the Viega Prepress street elbow for a secure connection. Smart Connect technology identifies unpressed connections during pressure testing to ensure proper connections the first time and eliminate callbacks. Approved to the most codes and standards of any other copper press fitting system (IPC, UPC and NSF included) and with more than 400 different fitting configurations to suit virtually any type of plumbing or HVAC job, Viega Prepress street elbows are the top choice of professionals around the globe.

• Install ProPress street elbows up to 60% faster than soldering
• Press street elbow quickly repairs connections, wet or dry
• Designed for use with ¾ in. ASTM B88 and B75 tubing, not compatible with PEX
• Compatible systems include potable water, hydronics and more
• Installs in 7-seconds or less with a press tool, no flame, solder or flux required
• Viega smart connect technology helps installers identify unpressed fittings
• Press technology eliminates the need for burn permits or fire watch
• Wet or dry connections allow quick repairs on existing systems
• Durable internal EPDM rubber seals for watertight connections
• Rated for 0°F to 250°F, up to 300 psi for water applications
• Zero lead solution certified under NSF-61-383
• Reliability guaranteed by 50-year limited warranty

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega smart connect makes secure connection in less than 7-seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux, or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

SharkBite 3/4 in. Push-to-Connect Brass 90-Degree Elbow Fitting Pro Pack (4-Pack) is the fastest way to connect PEX, Copper, CPVC, PE-RT, or HDPE pipe in any combination. No soldering, clamps, unions, glue, or special tools required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal and backed by a 25-year warranty.

• Push-to-Connect fittings are ideal for installation in tight spaces
• Rated to 200 degree F and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year Warranty when used with PEX, copper, CPVC & PE-RT Pipe
• 5-Year Warranty when used with SDR-9 HDPE Pipe

Dearborn Plastic Flanged Strainer Tailpieces are available in various lengths, come with one or double flanged ends and compatible with any sink strainer. They are constructed of durable polypropylene plastic and are universal in design. Dearborn is known for providing superior quality plumbing products designed with the plumber in mind.

• 1-1/2 in. Dia by 8 in. length
• Made of durable polypropylene plastic
• Black in color, also available in white
• Meets ASTM F 409
• IAPMO Listed
• Also available in various lengths depending on drain application

NIBCO press fittings are the fastest, easiest way to join copper tubing systems. NIBCO PressG fittings are designed to join with seamless copper water tube in residential and commercial gas and compressed air systems. The press fittings can also be installed underground. NIBCO PressG fittings are user friendly, quick and easy to install. When properly crimped a unique "N" witness mark is clearly visible. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO PressG fittings features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO PressG copper fittings are backed by a 25-year limited warranty.

• Operating pressure 200 psi max, (125 psi for natural gas applications) depending on the application
• Temperature range -40°F to 180°F
• ASTM B75 alloy C12200 copper
• IFGC international fuel gas code
• NFPA 54/Z223.1 national fuel gas code
• NFPA 58 liquified petroleum gas code
• UPC chapter 12 fuel piping
• NFPA 30 flammable and combustible liquids code
• NFPA 30A code for motor fuel dispensing facilities and repair garages
• NFPA 31 standard for the installation of oil burning equipment (supply line only)
• Third party certified to ANSI LC4/CSA 6.32
• Third party certifiefd to IAPMO/UPC LCL-4
• ICC-ES PMG 1036