Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega smart connect makes secure connection in less than 7-seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux, or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

The NIBCO 3 in. PVC DWV All-Hub Sanitary Tee is designed for non-pressurized sanitary systems to connect a branch line into a vertical PVC drain line. The maximum working pressure is 5 psi. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires a primer before cementing
• Maximum working pressure of 5 psi
• All-hub solvent-welded connections
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

The NIBCO PVC sanitary tee is used in residential and commercial drain, waste and vent systems. The PVC DWV sanitary tee features a hub x hub x hub connection and a flowing sweep to aid in the evacuation of waste and used fluids. The tee allows for a connection to be made in continuous pipeline and branch out to a different direction. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading.

• PVC requires a primer before cementing
• Connects a branch line into a horizontal PVC drain line
• For use with non-pressurized sanitary systems
• All-hub solvent-welded connections
• Maximum working pressure of 5 psi
• Smooth interior finish for reduced friction and material buildup
• Helps remove wastewater and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

The NIBCO PVC DWV sanitary street tee is used in residential and commercial drain, waste and vent systems. The PVC DWV sanitary street tee features a spigot x hub x hub connection and a flowing sweep to aid in the evacuation of waste and used fluids. The tee allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• 3 in. Inside Diameter and 3.125 in. Outside Diameter
• UL Listed 94V-0
• NSF U.P. certified
• Maximum service temperature of 140 degree F
• Not for use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• Size range 1-1/2 in. to 4 in.

The PVC DWV sanitary street tee is used in residential and commercial drain, waste and vent systems. The PVC DWV sanitary street tee features a spigot x hub x hub connection and a flowing sweep to aid in the evacuation of waste and used fluids. The tee allows for a connection to be made in continuous pipeline and branch out to a different direction.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• PVC DWV is easy to install and is joined by solvent cementing or threading
• Maximum service temperature of 140 degree F
• Do not test or use with compressed air or other gases
• ASTM D2665 and D3311
• NSF/ANSI standard 14
• UL listed 94V-0

The 3/4 in. SharkBite Push-to-Connect Tee is the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Rated to 200 ° F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

The NIBCO 4 in. x 4 in. x 3 in. PVC DWV All-Hub Sanitary Tee connects a branch line into a vertical PVC drain line in a non-pressurized sanitary system. There are 2 types of DWV plastic: ABS (black plastic) and PVC (white plastic). The sanitary drainage and vent piping are installed to remove wastewater and water-borne wastes from the plumbing fixtures and appliances.

• PVC requires a primer before cementing
• Connects a branch line into a vertical PVC drain line
• For non-pressurized sanitary systems
• All-hub solvent-welded connections
• Maximum working pressure of 5 psi
• NSF/ANSI standard 14
• UL Listed 94V-0

The NIBCO 4 in. PVC DWV Hub x Hub x Hub Sanitary Tee can be used to connect a branch line into a vertical PVC drain line. The tee is designed for use with non-pressurized systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires a primer before cementing
• Connects a branch line into a vertical PVC drain line
• Use for non-pressurized sanitary systems
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Hub x hub x hub solvent-welded connections
• Smooth interior finish for reduced friction and material buildup
• Maximum service temperature 140 degree F
• Do not test or use with compressed air or other gases

Use the SharkBite 3/4 in. x 1/2 in. x 1/2 in. Brass Push-to-Connect Tee to join combinations of copper, CTS cPVC and PEX tubing (all sold separately). This fitting is constructed from durable brass and features a lead-free design. It is certified for use underground and in behind-the-wall applications.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Rated to 200 ° F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

The SharkBite Disconnect Tong is the easiest way to disconnect SharkBite fittings in hard to reach places where it can be tough to get leverage on the release collar. The Stainless Steel Disconnect Tongs are the perfect tool for anyone frequently using SharkBite Fittings. The Tool depresses the release collar using the force applied by your hand to allow the stainless-steel teeth of the fitting to release and the fitting to be removed.

• Stainless steel for durability
• Easy 1-handed operation
• Color coded handle matches corresponding color on fitting bag
• Available in 1/2 in., 3/4 in. and 1 in. sizes
• Used with SharkBite copper tube size push-to-connect fittings
• SharkBite fittings can be used to connect copper, PEX or CPVC in any combination

The SharkBite Disconnect Tong is the easiest way to disconnect SharkBite fittings in hard to reach places where it can be tough to get leverage on the release collar. The Stainless Steel Disconnect Tongs are the perfect tool for anyone frequently using SharkBite Fittings. The Tool depresses the release collar using the force applied by your hand to allow the stainless-steel teeth of the fitting to release and the fitting to be removed.

• Stainless steel for durability
• Easy 1-handed operation
• Color coded handle matches corresponding color on fitting bag
• Available in 1/2 in., 3/4 in. and 1 in. sizes
• Used with SharkBite copper tube size push-to-connect fittings
• SharkBite fittings can be used to connect copper, PEX or CPVC in any combination

The NIBCO 2 in. PVC DWV All-Hub Sanitary Tee is designed for non-pressurized sanitary systems to connect a branch line into a vertical drain line. It has a maximum working pressure of 5 psi. The PVC DWV sanitary tee features a hub x hub x hub connection and a flowing sweep to aid in the evacuation of waste and used fluids.

• PVC requires a primer before cementing
• All-hub solvent-welded connections
• Maximum working pressure of 5 psi
• Tee allows for a connection to be made in continuous pipeline and branch out to a different direction

The 1/2 in. x 1/2 in. x 1/2 in. Tectite by Apollo Push-To-Connect Tee is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Specifically designed to allow transitions between copper, CPVC and PEX to polybutylene pipe
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 68
• Meets UPC, IPC and cUPC standard requirements
• Demount clip allows for fitting removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The NIBCO 1-1/2 in. PVC DWV All-Hub Sanitary Tee connects a branch line into a vertical PVC drain line in a non-pressurized sanitary system. The tee has a maximum working pressure of 5 psi. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires a primer before cementing
• Connects a branch line into a vertical PVC drain line
• For use with a non-pressurized sanitary system
• All-hub solvent-welded connections
• Maximum working pressure of 5 psi
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

The NIBCO 2 in. PVC DWV Hub x Hub x FIPT Test Tee requires a primer before cementing. The tee can be used to connect a branch line into a vertical PVC drain line. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

• PVC requires a primer before cementing
• Connects a branch line into a vertical PVC drain line
• For use with non-pressurized sanitary systems
• Hub x hub x FIPT solvent-welded connections
• Maximum working pressure of 5 psi
• Smooth interior finish for reduced friction and material buildup
• Helps remove wastewater and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140 degree F

The NIBCO 4 in. x 4 in. x 4 in. x 4 in. PVC DWV test tee features a hub x hub x cleanout connection with a plug to test the tightness of the system by assessing potential leakage. The NIBCO PVC DWV test tee is used in residential and commercial drain, waste and vent systems. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.

• PVC DWV is easy to install and is joined by solvent cementing or threading
• PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode
• Solvent weld connections
• Apply a primer to the PVC before cementing
• Helps air circulate in drainage piping
• Maximum working pressure of 5 psi
• Do not test or use with compressed air or other gases

The 3/4 in. x 1/2 in. x 3/4 in. SharkBite Push-to-Connect Tee is the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-Rings compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Rated to 200 ° F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

The 1/2 in. SharkBite Push-to-Connect Tee is the easiest way to join copper, cPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite Fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.

• Lead free DZR brass construction for durability and reliability
• Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Rated to 200 ° F and 400 PSI
• Meets all UPC, IPC and cUPC requirements

The 3/4 in. Tectite by Apollo Push-To-Connect Tee is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Specifically designed to allow transitions between copper, CPVC and PEX to polybutylene pipe
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 69
• Meets UPC, IPC and cUPC standard requirements
• Demount clip allows for fitting removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega smart connect makes secure connection in less than 7-seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux, or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega Smart Connect makes secure connection in less than 7 seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

The 3/4 in. x 1/2 in. x 3/4 in. Tectite by Apollo Push-To-Connect Tee is the fastest, cleanest and simplest way to join any combination of copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Specifically designed to allow transitions between copper, CPVC and PEX to polybutylene pipe
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 62
• Meets UPC, IPC and cUPC standard requirements
• Demount clip allows for fitting removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The NIBCO PVC sanitary tee is used in residential and commercial drain, waste and vent systems. The PVC DWV sanitary tee features a hub x hub x hub connection and a flowing sweep to aid in the evacuation of waste and used fluids. The tee allows for a connection to be made in continuous pipeline and branch out to a different direction.

• PVC requires a primer before cementing
• Connects a branch line into a vertical PVC drain line
• Use for non-pressurized sanitary systems
• Helps remove waste water and water-borne wastes from plumbing fixtures and appliances
• Hub x hub x hub solvent-welded connections
• Maximum working pressure of 5 psi

NIBCO 3 in. x 3 in. x 2 in. x 2 in. PVC DWV Double Sanitary Tee (Double TY/Cross) All Hub. DWV is used for non pressurized sanitary system Drain, Waste, and Vent. There are 2 types of DWV plastic: ABS (black plastic) and PVC (white plastic). The sanitary drainage and vent piping are installed to remove waste water and water-borne wastes from the plumbing fixtures and appliances. DWV also provides a circulation of air within the drainage piping. ABS (black) and PVC (white) plastic pipe and fittings have identical uses. The only reason for selecting 1 material over another is either the cost of the material or local plumbing code restrictions.

• 3 X 3 X 2 X 2 in. Inside Diameter and 3 1/8 X 3 1/8 X 2 1/8 X 2 1/8 in. Outside Diameter
• Brings 2 PVC DWV branch lines into a vertical drain line
• Solvent welded connections
• PVC requires a primer before cementing
• Smooth interior finish for reduced friction and material buildup
• Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
• Do not test or use with compressed air or other gases
• Maximum service temperature 140F
• "3 X 3 X 2 X 2 I.D. and 3 1/8 X 3 1/8 X 2 1/8 X 2 1/8 O.D."