This product features a robust, wide mouth cap for optimum airflow and snug fit back draft damper. It prevents cold air, snow or rain from entering the home. The removable pest screen slides out easily for removal of lint and debris.

• A removable pest screen helps to keep pests out and allows for easy cleaning of the duct
• Snap on pipe to cap assembly eliminates the need for lint trapping staples
• UV resistant coating helps prevent the cap from discoloring
• Cap is paintable to match the exterior of your home
• Hoods can be used in conjunction with brick, concrete or siding
• The molded caulk edge on the cap helps to maintain a clean caulking application

Built with heavy-duty butyl diaphragm system to absorb the expansion of water volume and help prevent dangerous pressure build-up. This Everbilt Expansion Tank will absorb pressure increases when properly installed on your closed water system. Most local codes now require an Expansion Tank on residential closed water systems. Water pressure over 80 psi can shorten the life of your water system and appliances.

• Stainless steel 3/4 in. MIP with hex
• Factory pre-charged at 40 psi
• cUPC certified/ NSF 61 compliant
• High quality coating prevents corrosion
• 16-Gauge cold rolled steel shell
• Brass air charging port with O-ring seal
• Maximum pressure of 150 psi
• Maximum temperature rating of 200 degree F
• Provides a reservoir for expanded water volume
• Protects water heater, fixtures and appliances

This product features a 3 louver damper system that helps to prevent cold air, snow or rain from entering the home. The louvers have been redesigned to help prevent them from sticking. This cap also features a UV resistant coating that prevents the sun from discoloring it.

• Plastic construction
• A recessed caulk line helps to assist in a clean caulking application
• Caps are paintable to match the exterior of your home
• Non-stick louvers
• Ideal for bathroom fan venting, dryer venting and kitchen range hood venting

The Fluidmaster 7514 Extra Thick Reinforced Wax Toilet Bowl Gasket with Flange and Bolts, is a superior solution for securing and sealing your toilet to floor. This complete wax ring kit includes reinforced and extra thick wax ring with flange, extra-long brass bolts and is packaged in tray to maintain shape. With 40% extra wax than standard wax rings this wax toilet ring kit provides the best odor and water seal possible. While the interior reinforcement ensures the wax ring holds its shape and won't break. A complete toilet seal kit, with included hardware for easy installation, extra security with 40% more wax and a 10 year warranty. Quickly replace leaky wax seals or upgrade your current seal with the Fluidmaster 7514 Extra Thick Wax Ring Kit.

• Securely seal your toilet with this extra thick wax ring kit
• Easy to install, polyethylene flange included
• Contains 40% more wax than standard wax rings
• Fits 3 in. and 4 in. waste lines
• Kit includes reinforced wax ring, extra-long brass bolts and flange
• 10 year warranty
• Provide an odor and water tight seal for flanges even with or below the floor

The Everbilt Hinge Pin Doorstop is held in place with a hinge pin. The self-adjusting pad makes full contact with the door. An oversized bumper mounted on an adjusting screw protects the door trim.

• Satin nickel finish
• Attaches to hinge
• No fasteners necessary
• Fits most standard residential door hinges
• Self-adjusting pad protects your door
• Decorative finish to match any home decor

The Everbilt Satin Nickel Spring Doorstop (5-Pack) helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door. Easy to install.

• Made of steel
• Satin nickel finish
• Screws included
• Attaches to baseboard
• Easy installation
• Satin nickel finish adds a beautiful touch to your home decor

This Dryer Vent Duct is ideal for both gas and electric dryer applications. This duct is UL2158A listed and marked for safe dryer venting. It is constructed of heavy duty, fire resistant, aluminum foil laminate.

• Duct will not support combustion
• Constructed with a high density, corrosion resistant, wire helix
• Duct is air tight
• Note: per UL2158A only ducts 8 ft. or less can bear the UL label
• Note: per UL2158A only ducts 8 or less can be UL marked

The lead-free wroth copper solder-reducing coupling is used in residential and commercial systems such as potable water, air conditioning and refrigeration. The reducing coupling features solder cups. Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas), UL 207 Recognized to 700 psi (select diameters).

• Dezincification resistant
• Third-party certified to NSF/ANSI 61 and 374
• Material and workmanship per ASME B16.24
• Material, workmanship and dimensions per MSS SP-106
• Size range 1/8 in. to 4 in.
• Options also include cleaned and bagged for oxygen service (medical gas)

The Everbilt Chrome Plated Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.

• Made of steel
• Chrome plated finish
• Screws included
• Attaches to baseboard
• Mounting hardware included
• Easy to install

The Everbilt 12 in. shelving support brackets (2-pack) are exclusively designed for the Everbilt fixed-mount system for installing ventilated wire shelving. Durably made of steel with a white coated finish, these brackets are designed to use with any 12 in. ventilated shelf and any 16 in ventilated shelf when used in a hanging application. Attach the shelving with wall clips (both sold separately) and then add the shelf support brackets for a sturdy storage area.

• Works with fixed mount shelving system
• Brackets can be spaced up to 36 in. apart, space closer together for additional support
• Solid steel construction for strength and stability with white coated finish
• Use with any 12 in. ventilated shelf and any 16 in. ventilated shelf when used in a closet hanging application
• All hardware included for easy installation

The 4 in. x 8 ft. Heavy-duty Semi-Rigid Aluminum Duct is UL2158A listed and marked for safe dryer venting. It is ideal when UL all aluminum duct is required by code in some gas and electric dryer applications. This duct is totally noncombustible and has a maximum operating temperature of 435 degree F.

• New manufacturing technology incorporated into the duct allows for easy rotation and therefore more durable handling of the duct by the contractor
• Semi-rigid product holds its shape to help improve airflow
• UL duct is thicker than the standard non-UL semi-rigid version
• All aluminum products are fire resistant

Install your aboveground water-supply piping with the 2 in. Copper Pressure 90 degree Cup x Cup Elbow. The copper fitting resists dezincification and meets ANSI and ASME specifications. It features a maximum working pressure of 364 psi.

• 2 in. Inside Diameter and 2.125 in. Outside Diameter
• Copper construction
• For use with aboveground water-supply piping
• Changes the direction of piping by 90 degree
• Solder connections
• Resists dezincification
• Meet ASME and ANSI specifications
• Maximum working pressure of 364 psi

This 4 in. x 25 ft. Dryer Vent Duct is ideal for both gas and electric dryer application. It is constructed of heavy-duty, fire resistant, 4-ply aluminum foil laminate that encapsulates a high density, corrosion resistant wire helix. This forms an air tight and easy to use air duct.

• Constructed of heavy-duty, fire resistant, aluminum foil laminate
• Constructed with a corrosion resistant, wire helix
• Duct is airtight
• Will not support combustion
• Note: per UL2158A only ducts 8 feet or less can be UL marked

These Worm Clamps are ideal for attaching aluminum ducts to other aluminum products, including elbows and pipe. Easily adjustable with the turn of a screwdriver, these clamps can be used with all venting applications. A heavy-duty galvanized steel construction ensures longevity through a variety of uses. For optimal performance, it is recommended to use a manual screwdriver to avoid over tightening and stripping the screw.

• Made of heavy duty galvanized steel
• Easily adjustable using a hex or flat head screwdriver
• Adjusts from 5-1/8 in. to 6-1/2 in.
• Can be used in all venting applications

Complete your aboveground water-supply piping installation with the Everbilt 3/4 in. x 1/2 in. Copper Pressure 90 degree C x C Reducing Elbow. The fitting is compatible with types L and M copper tubing. Features a 582 psi maximum working pressure and relies on a force or pressure to maintain flow.

• 3/4 X 1/2 in. Inside Diameter and 7/8 x 5/8 in. Outside Diameter
• Copper construction
• For use with aboveground water-supply piping
• Use with types L and M hard-temper copper tubing
• Sweat connections
• Maximum working pressure of 582 psi
• Relies on pressure to maintain flow
• Options also include cleaned and bagged for oxygen service (medical gas)

The Everbilt End Cap Assortment Pack is for use with any Everbilt ventilated shelving. Contains 10 small end caps and 4 large end caps, enough to cover both cut ends of one ventilated shelf. Easy installation, no tools required.

• Covers rough cut wire ends on ventilated shelving.
• Enough end caps for both ends of one ventilated wire shelf.
• Protects scratches on walls during installation
• Gives shelving a finished look
• Easy installation, no tools required.
• White color to match shelf
• Small caps for regular duty shelf and large caps for fixed rod shelf

The Everbilt 3-1/2 in. x 5/8 in. Radius Smooth Action Door Hinge features a 5-knuckle full mortise design. The removable pin provides easier installation or removal of door. Lubricated knuckles prevent binding to ensure quiet operation and long-life. Easy to install.

• Made of steel
• Satin nickel finish
• Screws included
• Removable pin
• Knuckles feature additional lubrication to ensure smooth and quiet operation
• Includes detailed installation instructions

The Everbilt 3-1/2 in. x 5/8 in. Radius Door Hinges (12 per Pack) feature a 5-knuckle full mortise design. The removable pin provides easier installation or removal of door. Easy to install.

• Made of steel
• Satin nickel finish
• Screws included
• 3-1/2 in. x 3-1/2 in. hinges
• Ideal for most interior residential doors
• Removable pin provides easy installation or removal of a door

The Everbilt Oil-Rubbed Bronze Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.

• Made of steel
• Oil-rubbed bronze finish
• Screws included
• Attaches to baseboard
• Can be installed on either baseboard or door
• Easy to install

The Everbilt Fixed Rod Shelf Wall Bracket is designed support the front lip of any Everbilt Fixed Rod ventilated wire shelf. For use in a wall-to-wall or wall-to-open application. Use in conjunction with support brackets and wall clips in a fixed mount installation (support brackets and wall clips sold separately). All hardware included for installation. Dimensions: 2.17-in. L x 1.73-in. W x 2.76-in. H

• Works with Everbilt Fixed Rod Shelving
• Supports front lip of shelf where it meets the side wall
• Use in conjunction with support brackets and wall clips in a fixed mount installation (support brackets and wall clips sold separately)
• White Finish
• Includes 2 wall brackets and mounting hardware
• Hardware included
• Designed to support the front of ventilated wire shelving
• Dimensions: 2.17-in. L x 1.73-in. W x 2.76-in. H

The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 18 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves. It is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction. Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.

• Extremely durable corrugated stainless-steel construction
• Built in dielectric sleeves eliminates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• Corrugated stainless steel tubing is .01 in. / 25mm thick
• 18 in. L; Minimum recommended bend radius: 2.5 in.
• 3/4 in. FIP connectors
• Chrome plated brass supply nuts
• Soft, thick EPDM rubber washers to create a tight seal. Follow installation instructions carefully and do not over tighten.
• Designed for use in residential and commercial applications for water heater hookups
• For use with water only in accessible locations
• Conforms to ASME A112.18.6/CSAB125.6

Perfect for both residential and commercial settings, the exclusive Brass Hose Bibb from Everbilt is designed for milder climates. Easily rotate the handle to open and close the heavy-duty valve made of strong and durable brass. The 3/4 in. male threaded hose outlet is compatible with most 3/4 in. standard garden hoses.

• Multi-turn handle controls water flow
• Can be installed using the 3/4 in. MIP threaded inlet
• Primarily compatible with galvanized plumbing systems, can be used with copper or CPVC pipe with the appropriate fittings
• 3/4 in. hose thread outlet fits most 3/4 in. garden hoses
• Durable, corrosion resistant brass construction
• Large wrench flats make installation easier

The NIBCO lead-free* wrot copper solder pressure tee used in residential and commercial systems such as potable water, air conditioning and refrigeration. Options also include cleaned and bagged for oxygen service (medical gas). The tee features solder cups. The fitting allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects. NIBCO copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

• 1 in. Inside Diameter and 1.125 in. Outside Diameter
• Copper construction
• For use in aboveground supply lines
• Provides a branch line from a main line
• For use with copper piping
• Solder connections
• 494 psi maximum working pressure
• Dezincification resistant
• Meets specifications ASME/ANSI B16.22 and MSS SP-104 or MSS SP-109; certified to NSF/ANSI 61

The Everbilt Solid Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Easy to install.

• Made of steel
• Satin nickel finish
• No fasteners required
• Attaches to baseboard

The Everbilt Satin Nickel Light Duty Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.

• Made of steel
• Satin nickel finish
• No fasteners required
• Attaches to baseboard
• Mounting hardware included
• Easy to install

The lead-free wroth copper solder pressure 90 close rough elbow is used in residential and commercial systems such as potable water, air conditioning and refrigeration. Options also include cleaned and bagged for oxygen service (medical gas). Wroth fittings are made from commercially pure copper mill products per ASTM B75 Alloy C12200 and conform to material and workmanship per ASME B16.22 and MSS SP-104.

• 3/4 in. inside Dia and 0.875 in. outside Dia
• For use with aboveground water-supply piping
• 90 elbow features solder cups and a close rough radius
• Fitting provides a means of changing the pipeline direction 90 it is used when velocity is not a problem
• Dezincification resistant
• Size range 1/8 in. to 8 in.
• Maximum working pressure of 408 psi
• 3/4 I.D. and 0.875 O.D.

The Fluidmaster 7510 Wax Toilet Bowl Gasket, is designed to be a quick and easy wax seal for your toilet bowl. A trusted and proven standard wax ring that can be stacked for certain flanges or for extra leak and odor protection. Fitting both 3 in. and 4 in. waste lines, this wax gasket comes packaged in tray to maintain shape. Perfect for any toilet the Fluidmaster Standard Wax Seal ensures your toilet bowl and sealed to the floor and eliminates water and odor leaks.

• Re-seal you toilet with this proven wax ring
• Easy to install
• Fits 3 in. and 4 in. waste lines
• Packaged in tray to maintain shape
• Also, available with flange or as a kit
• For use with flanges even with or above the floor

The 3/4 in. CPVC Slip x Slip Ball Valve is designed for use with hot and cold water. The Ball Valve features CPVC construction and is compatible with CPVC tubing-sized pipes (pipes not included). The valve has a maximum working pressure of 100 psi at 180 degree F and is not meant for use with compressed air.

• CPVC construction
• Compatible with CPVC pipes (sold separately)
• 125 psi maximum pressure
• Working temperature from 40 degree F to 150 degree F
• Suitable for all potable water supply installations
• Beige color

Add eye-catching style to your new set of shelves with these heavy-duty pipe shelving brackets. Iron fittings and black steel pipe pair impeccably with woods of various colors and sizes. Treat your visitors to your sense of style and attention to detail. These PIPE DECOR brackets fit a surprising number of looks and aesthetics, including steampunk lighting, industrial, factory, French country farmhouse, vintage, retro reclamation, and D-I-Y. You will know PIPE DECOR parts and accessories when you hold them. Beauty and beast. Strength and style. This is real industrial pipe for your creative design needs. Accept no substitutes. All our pipe and fittings come coated in a light industrial grease to prevent rusting. Clean and seal each piece before assembly to ensure that they stay rust-free. After cleaning seal, the pipe with polyurethane spray to protect it from rust and scratches.

• 1/2 in. inside diameter and 0.625 in. outside diameter
• For aboveground use
• Solder connection required
• Dezincification resistant
• Size range 1/8 in. to 8 in.
• 439 psi maximum working pressure
• Used to join straight lengths of tubing
• 1/2 in. ID and 0.625 in. OD

The 1-1/2 in. Copper Slip Coupling is used for cup x cup connections in water supply piping. It is furnished without a center stop and is used to join two lengths of copper tubing. The durable copper coupling is de-zincification resistant.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• Made of copper
• Furnished without a center stop
• Used aboveground for water supply piping
• Used to splice together stationary lengths of copper tubing
• Cup x cup connections
• Solder connections
• De-zincification resistant to protect mechanical strength

Designed for larger jobs, the Everbilt Fixed Mount Metal U clips (48PK) is designed to securely mount the back of your ventilated wire shelving to a wall. Designed for use with the fixed mount installation method when additional support is required. The metal clips lock the back of the shelving into place, while metal shelf support brackets (sold separately) attach to the front of the shelving. For safe support, use 1-shelf clip every 12 in. and 1 at each end of the shelf.

• Package includes 48 clips, 96 anchors and 96 screws
• Clips secure a wire shelf to concrete or drywall by locking the back of the shelving into place
• Sturdy metal construction offers maximum support
• Use 1-shelf clip every 12 in. and 1 at each end of the shelf
• Designed for use with all Everbilt ventilated shelving

Designed for larger projects, the Everbilt Fixed Mount Concrete/Stud Wall Clips (Contractor 12PK) is designed to install on the back rod of ventilated wire shelving in a fixed mount application to prevent the shelf from popping up at the rear. The clip is designed to work with the wall clip to hold the shelf firmly in place. Metal screws and plastic anchors are included for installing the down clips on drywall, wood studs or concrete.

• Clips keep ventilated wire shelving secured in place
• For use with fixed mount installations
• Hardware for drywall, concrete and wood stud installation
• White PVC plastic construction for durability
• Set includes 12 clips with anchors and screws

The lead-free wroth copper solder pressure 90 close rough elbow is used in residential and commercial systems such as potable water, air conditioning and refrigeration. Options also include cleaned and bagged for oxygen service (medical gas). Wroth fittings are made from commercially pure copper mill products per ASTM B75 Alloy C12200 and conform to material and workmanship per ASME B16.22 and MSS SP-104.

• 1/2 in. Inside Diameter and 0.625 in. Outside Diameter
• For use with aboveground water-supply piping
• 90 elbow features solder cups and a close rough radius
• Dezincification resistant
• Size range 1/8 in. to 8 in.
• Maximum working pressure of 408 psi
• Changes the direction of piping 90
• "1/2 I.D. and 0.625 O.D."

Keep your furniture and floors protected while painting and cleaning with the Everbilt 6 ft. x 9 ft. 8 oz. Medium Duty Canvas Drop Cloth. It is made of high-quality canvas that absorbs spills and keeps paint from tracking. This multi-purpose sized drop cloth can be washed and reused conveniently.

• Made of canvas for durability
• Keeps paint from tracking and absorbs spills
• Offers reliable protection while painting and cleaning
• Multi-purpose size ensures convenience
• Reusable and washable drop cloth
• For painting, cleaning, wallpapering and removal, storage and other jobs
• Absorbent fabric prevents tracking
• Available multiple ounce weights and sizes

The NIBCO 3/4 in. Copper Pressure FTG x FIPT Female Fitting Adapter is used in above-ground water supply piping in a system using pressure for flow. It adapts to a standard male fitting using copper solder.

• High quality copper
• Used for above-ground water supply piping
• Adapts to standard male pipe threads with solder connection
• Maximum 582 psi
• Dezincification resistant
• Options also include cleaned and bagged for oxygen service (medical gas)

Sheet metal screws are an essential fastener for working with thinner metal. Sometimes used with fiberglass, wood or plastic. These coarse threaded screws are available with a self-tapping or self-drilling point. Sheet metal screws come in a variety of head types, finishes and drive styles to match the needs of your project.

• Commonly used to secure panels and covers in HVAC and electrical applications
• Made from zinc plated steel for durability
• Use with a Phillips drive
• Includes 100 sheet metal screws to complete your project
• Self-tapping
• Reusable packaging
• Highly versatile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents

The 4 in. x 6 ft. Heavy Duty Semi-Rigid Aluminum Duct with Collars is ideal when all aluminum duct is required x code in some gas and electric dryer applications. It can also be used for bathroom fan venting. This duct is totally noncombustible and has a maximum operating temperature of 435 degree F.

• Aluminum collars on both ends of the duct swivel making for easy attachment to the dryer exhaust port and exterior exhaust hood
• UL2158A listed and marked for safe dryer venting
• New manufacturing technology incorporated into the duct allows for easy rotation and therefore more durable handling of the duct by the contractor
• UL duct is thicker than the standard non-UL semi-rigid version that allows for a more robust installation

Designed for larger projects, these Everbilt Fixed Mount Drywall Back Wall Clips (48PK) are designed to mount ventilated wire shelving to a back wall when you are installing a closet system using the traditional fixed-mount installation method into drywall. The clips anchor directly into the drywall and lock the back of the shelving into place. Use 1-shelf clip every 12 in. and 1 at each end of the shelf. Add shelf support brackets (sold separately) to hold the front of the shelf.

• For use when attaching shelving to drywall
• Locks back of shelf securely into place
• Use in traditional fixed mount applications
• Package includes 48 clips and hardware
• White Finish

Copper Tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Copper Tube is available in Type K, Type L, Type M and utility grade DWV. Each piece is marked and color coded for easy identity.

• For use in above-ground potable water supply systems
• Meets ASTM standards
• Continuously marked with size
• Constructed of high grade copper
• Incised marked and color coded for long lasting identity
• Specified brand of industry professionals
• Used in gas applications

The ALFI BRAND squared design bottle P-Trap provides a modern and sleek alternative to traditional exposed plumbing. Available in Polished Chrome or Brushed Nickel finishes, these P-Traps are both beautiful and functional, making them the easy choice for any vessel sink application. A stylish bathroom begins with the smallest details.

• 3/4 in. inside diameter and 0.875 in. outside diameter
• For aboveground use
• Used to join straight lengths of tubing
• Dezincification resistant
• Size range 1/8 in. to 8 in.
• Requires pressure to maintain flow
• 439 psi maximum working pressure
• 3/4 in. ID and 0.875 in. OD

Use the 1 in. Copper Pressure 45 degree FTG x Cup Street Elbow to change the direction of your aboveground water-supply piping 45 degree . The copper fitting is built to resist dezincification. It features a maximum working pressure of 494 psi.

• 1 in. Inside Diameter and 1.125 in. Outside Diameter
• Copper construction
• For use with aboveground water-supply piping
• Changes the direction of piping by 45 degree
• Solder connections
• Resists dezincification
• Meets ANSI B16.22 and ASME specifications
• Maximum working pressure of 494 psi

The Everbilt Lead Free Ball Valve with Drain is constructed of heavy forged brass and has a lever handle with Solder Connections on both ends. Designed for residential and commercial use on water air, steam, oil or gas. Full port for maximum flow and minimum pressure drops. This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.

• Extremely low return rate
• Forged brass construction
• Lead free design is suitable for all potable water supply installations
• Easy quarter-turn operation
• Suitable for oil, water and gas
• Side tap allows non-pressure side to be drained when valve is in the closed position
• Max pressure 600 psi

The 3 in. x 8 ft. Semi-Rigid Aluminum Duct is ideal for bathroom fan venting. This duct is totally noncombustible. It has a maximum operating temperature of 435 degree F.

• Maximum durability for robust installation
• All aluminum products are fire resistant
• Semi-rigid product holds its shape to help improve airflow
• 3 in. Dia and stretches to 8 ft. L

Everbilt lath screws provide a flush finish when attaching lath and plywood to metal studs. The screws are made of hardened steel and plated with zinc. They can be used for variety of thin-gauge (25-Gauge to 20-Gauge) metal-to-metal applications and non-load bearing wood applications. These self-piercing screws feature a washer-like truss head design which provides increased holding power and stability. No pre-drilling is required for installation.

• Designed to attach metal to metal (25-Gauge to 20-Gauge)
• Sharp point
• Truss head screw
• Phillips drive
• Highly versitile
• Common project applications: roofing, HVAC, steel stud framing, gutters and register vents

The Everbilt 4 ft x 12 in Fixed Rod Shelf is perfect for adding additional storage space to your closets. For added convenience there is a built-in rod for hanging garments. The 12 in shelf depth is ideal for most laundry rooms, and standard reach-in, linen or coat closets. Works best when paired with the Fixed Mount hardware system.

• 4 ft length
• 12 in depth
• Approximate 1" deck rod spacing
• Can be cut to custom length

Make plumbing applications easier with this Brass Pipe Nipple. This fitting is durably constructed from lead-free, rust-resistant brass to prevent corrosion. Both ends have male threads to connect to female fittings or pipes.

• 10-pieces per package
• Do not overtighten
• Not for use with steel tubing
• California residents see prop 65 warnings
• Not for underground use
• Ideal for gasoline, grease, oil, water, vacuum and air lines

Connect pipes of different types with this brass adapter. This adapter is easy to install and is perfect for gasoline, grease, vacuum, oil, water and air lines. Durable brass construction resists corrosion.

• 10-pieces per package
• Do not overtighten
• Not for use with steel tubing
• California residents see prop 65 warnings
• Not for underground use
• Ideal for gasoline, grease, oil, water, vacuum and air lines

The Everbilt 12 ft x 12 in Fixed Rod Shelf is designed with larger projects in mind. For added convenience there is a built-in rod for hanging garments. The 12 in shelf depth is ideal for most laundry rooms, and standard reach-in, linen or coat closets. Works best when paired with the Fixed Mount hardware system.

• 12 ft length
• 12 in depth
• Approximate 1" deck rod spacing
• Can be cut to custom length