Product Overview

ProLite Premium Large Format Tile Mortar offers high bond strength in a lightweight formula with excellent handling characteristics for a wide variety of floor and wall tile installations. Excellent for setting large format tile or stone, ProLite will not sag or slip on walls and offers non-slump performance for floor installations. Capable of thin-set or medium bed application up to 3/4 in. (19 mm) thick on horizontal surfaces after beat-in. Formulated with CustomLite Technology, ProLite is 40% lighter than traditional mortars. For interior and exterior installations. A 30 lbs. (13.6 kg) bag covers the same area as a 50 lbs. (22.68 kg) bag of traditional mortar.

• Excellent for ceramic, porcelain, glass, natural stone tile as well as other tile types
• For use over concrete, cement backerboards, drywall, exterior grade plywood, existing ceramic tile, vinyl flooring and plastic laminates
• Can be used in wet areas, including showers
• For interior and exterior installations
• High bond strength
• Non-slump - for use as a thin or medium bed mortar up to 3/4 in.
• Exceeds ANSI A118.4TE, A118.15TE and A118.11 without the need for additives
• A 30 lb. bag of ProLite covers the same area as a 50 lb. bag of traditional mortar
• Formulated with recycled material contributes to LEED certification
• Sag and slip resistant - immediately holds wall tiles in place
• Covers up to 100 sq. ft. depending on installation practices and jobsite conditions
• Allow 24 hours before grouting or light traffic. Submerged tile installations must cure for 14 days before filling with water

Proposition 65 Information

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.

Specifications

Warranty

1 Year Product