Product Overview

This drawer slide kit is constructed of steel tracks with plastic rollers, and it comes in a white powder coated finish. These tracks feature a self-closing design that commences at the final 2-1/2 in. from the end of the 19-3/4 in. long tracks when closing. The maximum load capacity for this kit is 75 lbs. and it fits most bottom/side-mounted drawer systems. This kit cannot be cut down to fit smaller drawer depths as it is designed with a positive stop at the ends of the fixed tracks, and because the rear rollers (11/16 in. Dia. wheels) on the sliding tracks are fastened to the ends of the drawer-mounted track pieces. These bottom mount drawer slides can be installed in drawer cabinets with face frames and without. If installing in drawer cabinet with face frame, Prime-Line's model number R-7240 (purchased separately) may be necessary if existing back plates are damaged. The clearance required between the drawer and the drawer opening for these types of slides is as follows: 1/2 in. on left and right sides, 1/4 in. at the bottom and 5/8 in. at the top. Installation instructions are included with each set, and they can also be found within the manufacturer's website.

• REPAIR OR INSTALL DRAWER TRACKS: Prime-Line MP7212 Drawer Slide Kit is perfect for installing or replacing drawer track hardware on most bottom/side-mounted drawer systems for smooth functionality
• SELF-CLOSING DESIGN: This drawer slide hardware features a self-closing mechanism that engages during the last 2-1/2 inches of drawer closure, ensuring seamless and secure closing every time
• DURABLE CONSTRUCTION: Made of steel tracks with a white powder-coated finish and self-lubricating plastic rollers, this replacement drawer track is built to last and can support up to 75 pounds
• INSTALLATION: Comes with all necessary fasteners and detailed instructions for simple installation; ideal for DIY enthusiasts looking for reliable replacement drawer slide solutions
• DIMENSIONS: The 19-3/4 inch tracks fit 16-inch deep drawer cabinets and require specific clearances: 1/2 inch on sides, 1/4 inch at the bottom, and 5/8 inch at the top; for further dimensional information, please see the line drawing
• SPECIAL NOTE - (Not Universal) Be sure to consider installing part number R 7240 as the back bracket if your drawer does not currently have one, or is damaged

Specifications

Warranty

Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.