Product Overview

The 3/4 in. NPT threaded mount is designed to be used when mounting the Evolve auto diverting tub spout on 3/4 in. NPT threaded pipes or pipes using a 3/4 in. NPT threaded adapter. The ideal pipe length (measured from the wall) for using the 3/4 in. NPT threaded mount is 7/16 in. to 1/2 in. A trim plate ships with the auto diverting tub spout. It has a depth of 3/8 in. and can be used to fill a gap between the wall and the back of the tub spout. It can also be used to cosmetically cover larger access openings to the tub spout's water supply. If using the trim plate, be sure to add its depth (3/8 in.) to the pipe length measurements previously provided. Evolve auto diverting tub spout systems with part numbers ending in CT-CS do not include the tub spout mounts. For these systems, the mounts must be ordered separately.

• Compatible with all Evolve brand tub spouts and tub/shower systems
• For use on 3/4 in. NPT male threaded pipes to install Evolve tub spouts
• Compatible with 3/4 in. NPT male adapters
• Innovative, patented design
• Pack size is 9
• Model: EV3104-XX000-CT
• Model number: EV3104-XX000-CT

Proposition 65 Information

WARNING: This product contains one or more chemicals, including lead, known to the state of California to cause cancer and birth defects or other reproductive harm. Wash hands after installing or removing this products. www.p65warnings.ca.gov

Specifications

Warranty

3 Year Limited Warranty