Kidde Firex Hardwired Carbon Monoxide Detector with LED Light, Interconnectable, 9V Backup Battery
Product Overview
The Kidde FireX ACDC 120-Volt Carbon monoxide alarm detects carbon monoxide. This hardwired 120-Volt Inter Connectable Carbon Monoxide Alarm with 9-Volt Backup can be interconnected with up to 24 Kidde devices, 18 of which can be initiation style (additional devices not included). The alarm has a fuel-cell design with a low-battery warning that issues a brief alarm chirp and a red LED light that will flash approximately every 15-seconds.
- Can be inter connected with up to 24 Kidde devices, 18 of which can be initiation style (additional devices not included)
- Compatible with smoke alarms, carbon monoxide alarms and heat alarms on 1 wiring network (alarms and wiring sold separately)
- Smart inter connect system enables the unit to alarm in a carbon monoxide pattern and sound a different pattern when inter connected to a Kidde smoke alarm that is in alarm mode (smoke alarm sold separately)
- Fuel-cell design with a low-battery warning that issues a brief alarm chirp and red LED light that will flash approximately every 15-seconds
- Piezoelectric horn is rated at 85dB at 10 ft.
- Alarm will not sound if carbon monoxide levels are below 30 PPM
- 9-Volt battery backup provides protection during power outages
- Compatible with Kidde, FireX, Code One and Sentinel products
- Meets sensitivity requirements of UL 2034 single and multiple-station carbon monoxide alarms
- Carbon monoxide detector utilizes an electrochemical sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detected
- *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
- UL/CSFM Ref. Kidde Part KN-COB-IC