The KING Electric PHM-1 Milk house heater is designed for garage/shop applications where supplemental heat is needed. Made completely of metal, this durable little heater will provide plenty of heat for your work bench and other garage/shop applications. The easy to use thermostat allows you to adjust the heat output to the perfect level depending on the size of space needing heat.

• Fan/low/high/off switch
• Ni-chrome heating element
• 6 ft. cord and plug
• Safety tip over switch
• Adjustable thermostat
• Carrying handle
• All metal construction
• Power indicator light

The KING Electric GH Series heaters are designed for primary or supplemental heat sources for large areas such as garages, workshops, warehouses, barns, etc. Spiral steel finned elements and high CFM ensure even air distribution and cooler element operation, thereby increasing the life of the element. Equipped with a thermostat and an on/off switch, this heater can be controlled either manually or with a wall mounted thermostat. The adjustable front louvers allow you to direct heat where it is needed.

• Spiral steel finned element
• Power indicator light
• Built in thermostat
• On / off switch
• Enclosed unit bearing motor
• Heavy gauge riveted construction
• Hinged electrical access cover
• Adjustable louvers

The EKB 5000-Watt heater is designed for the garage/shop area that needs the occasional temporary comfort level heating. The perfect garage or shop heater for occasional, temporary comfort heating. Thermostat will control from 40 to 85 degree . Bracket can be wall or ceiling mounted at a minimum of 6 ft. above the floor. Good air distribution and comfort is achieved by swiveling bracket to specific work area.

• Perfect garage or shop heater for occasional, temporary comfort heating
• Operation range 40 degree F to 85 degree F
• Rigid muscovite mica construction with 80-20 nichrome heating wire
• Durable powder coated finish

Replacement or Field-installed thermostat for electric heater models PX, KT, KTW, PAW, W and WHF. This is a built-in snap action, single pole or double pole thermostat kit for KING Electric heater models PX, KT, KTW, PAW, W and WHF. In Bright White. Also available with Almond or Black knob.

• Positive response
• Easy installation
• Fully protected bi-metal sensor
• 48 - 80 degree F operating range

Electric Baseboard Heaters are an economical way to provide heat. They are typically used in apartment construction and other rental properties because of low initial cost and maintenance. Quality components guarantee a long-lasting, reliable heater. Not a plug-in model, heater safely hard-wires for 500 W at 120 V.

• Not a plug-in model, heater safely hard-wires for 500 W at 120 V
• Aluminum Ribbon Fin Element
• Full Length Safety Cutout
• Crushproof Element
• Natural Convection Heat
• Dent Resistant Die Form Cover
• 1 year warranty

The KING Electric GH Series heaters are designed for primary or supplemental heat sources for large areas such as garages, workshops, warehouses, barns, etc. Spiral steel finned elements and high CFM ensure even air distribution and cooler element operation, thereby increasing the life of the element. Equipped with a thermostat and an on/off switch, this heater can be controlled either manually or with a wall mounted thermostat. The adjustable front louvers allow you to direct heat where it is needed.

• Spiral steel finned element
• Power indicator light
• Built in thermostat
• On / off switch
• Enclosed unit bearing motor
• Heavy gauge riveted construction
• Hinged electrical access cover
• Adjustable louvers

KING Electric Wall Heater TKIT-1 This is a built-in snap action, single pole single throw thermostat kit for the KING PAW and W heaters. Thermostat kit Single Pole Positive Response Easy Installation Fully protected bi-metal sensor 48 degree F to 80 degree F operating range White. 48 - 80 degree F operating range.

• Positive response
• Easy installation
• Fully protected bi-metal sensor
• 48 - 80 degree F operating range

Electric Baseboard Heaters are an economical way to provide heat. They are typically used in apartment construction and other rental properties because of low initial cost and maintenance. Quality components guarantee a long-lasting, reliable heater. Not a plug-in model, heater safely hard-wires for 1000 W at 120 V.

• Not a plug-in model, heater safely hard-wires for 1000 W at 120 V
• Aluminum Ribbon Fin Element
• Full Length Safety Cutout
• Crushproof Element
• Natural Convection Heat
• Dent Resistant Die Form Cover
• 1 year warranty

The KING Electric K101 single pole line voltage thermostat has a larger and more sensitive mechanical bi-metal sensor that improves temperature accuracy to 3 degree F. This feature achieves a better comfort level with a reduced temperature swing as compared to economy models. Its modem appearance with large grip knob allows easy adjustment to all temperatures. It does not required ground wire which makes installation fast and easy.

• Mounts directly to a 2 x 4 in. vertical electrical outlet box
• Single or double pole (positive off) available
• Includes C and F control dials
• Operates 41 - 90 degree F ( 3- 32 degree C)
• Sits flush against wall
• Clean beveled style suits any decor

The KING Electric PGH Series garage heater is a rugged portable heater designed to provide a high capacity heating source at an affordable price. Perfectly suited for workshops, garages or construction sites. Use the built-in mechanical thermostat to easily set the desired temperature. The SureStop temperature-limiting feature provides auto-rest protection from overheating. Requires 20A-240V NEMA #6-20R receptacle, will not work with standard 120V receptacle.

• Built-in thermostat and on / off switch
• Carrying handle with built-in cord storage
• Stainless steel heating element
• Auto-reset fan delay increases efficiency
• Overheat safety limit protection
• 6 ft. cord and 240-Volt plug
• Durable scratch and rust resistant finish
• Universal wall / ceiling bracket included
• Requires 20A-240V NEMA #6-20R receptacle, will not work with standard 120V receptacle

Electric Baseboard Heaters are an economical way to provide heat. They are typically used in apartment construction and other rental properties because of low initial cost and maintenance. Quality components guarantee a long-lasting, reliable heater. Not a plug-in model, heater safely hard-wires for 1500 W at 120 V.

• Not a plug-in model, heater safely hard-wires for 1500 W at 120 V
• Aluminum Ribbon Fin Element
• Full Length Safety Cutout
• Crushproof Element
• Natural Convection Heat
• Dent Resistant Die Form Cover
• 1 year warranty

The KING Electric PUH utility heater packs a big punch in a small frame. This utility heater is designed to provide supplemental heat for small areas at an affordable price. Made completely of metal, this heater is durable enough for any application. Easily set the desired temperature with the built-in thermostat.

• Built-in thermostat
• Dual on/off switches
• 6 ft. cord and plug
• Rugged metal case
• Comfort grip handle
• Long lasting ceramic heating element
• Power indicator light
• Powder coated finish

KING Electrics KP1215-ECO with EcoStat automatically uses the lowest wattage required to heat the room, reducing energy consumption. The EcoStat ensures consistent comfort by minimizing room temperature swings. In a cold room it utilizes full power to heat a room quickly. Once the desired temperature is achieved, the heater automatically reduces the wattage to maintain the room temperature. Maximum comfort is achieved.

• Dual wattage 750-Watt/1500-Watt element
• 2-stage, energy saving ECO-stat
• ECO-indicating lights
• Safety cutout and tip-over switch
• 6 ft. Cord with grounded plug

The KING Electric GH Series heaters are designed for primary or supplemental heat sources for large areas such as garages, workshops, warehouses, barns, etc. Spiral steel finned elements and high CFM ensure even air distribution and cooler element operation, thereby increasing the life of the element. Equipped with a thermostat and an on/off switch, this heater can be controlled either manually or with a wall mounted thermostat. The adjustable front louvers allow you to direct heat where it is needed.

• Spiral steel finned element
• Power indicator light
• Built in thermostat
• On / off switch
• Enclosed unit bearing motor
• Heavy gauge riveted construction
• Hinged electrical access cover
• Adjustable louvers

Electric Baseboard Heaters are an economical way to provide heat. They are typically used in apartment construction and other rental properties because of low initial cost and maintenance. Quality components guarantee a long-lasting, reliable heater. Not a plug-in model, heater safely hard-wires for 500 W at 120 V.

• Not a plug-in model, heater safely hard-wires for 500 W at 120 V
• Aluminum Ribbon Fin Element
• Full Length Safety Cutout
• Crushproof Element
• Natural Convection Heat
• Dent Resistant Die Form Cover
• 1 year warranty

The KING Electric K102 double pole line voltage thermostat has a larger and more sensitive mechanical bi-metal sensor that improves temperature accuracy to 3 degree F. This feature achieves a better comfort level with a reduced temperature swing as compared to economy models. It has a modem appearance with large grip knob which allows easy adjustment to all temperatures. No ground wire design MaKING installation fast and easy.

• Mounts directly to a 2 x 4 in. vertical electrical outlet box
• Single or double pole (positive off) available
• Includes C and F control dials
• Operates 41 - 90 degree F ( 3- 32 degree C)
• Sits flush against wall
• Clean beveled style suits any decor

Electric Baseboard Heaters are an economical way to provide heat. They are typically used in apartment construction and other rental properties because of low initial cost and maintenance. Quality components guarantee a long-lasting, reliable heater. Not a plug-in model, heater safely hard-wires for 1250 W at 120 V.

• Not a plug-in model, heater safely hard-wires for 1250 W at 120 V
• Aluminum Ribbon Fin Element
• Full Length Safety Cutout
• Crushproof Element
• Natural Convection Heat
• Dent Resistant Die Form Cover
• 1 year warranty

The KBP is an excellent choice for a garage or shop heater; it easily has the capacity to heat a large space. It has a flow through design which means it pulls the air from the back of the heater and discharges out the front for efficient air movement. This is a rugged heater with quality components that is suitable for commercial applications as well. It comes standard with a 3-position switch and an accurate built-in thermostat that has degrees on the label for precise temperature control. Also comes with fan delay to help dissipate the heat from the elements.

• Quality components
• Suitable for commercial applications
• Built-in thermostat
• Degrees on the label for precise temperature control

A portable baseboard is an easy way to add supplementary heat to any room. The nice advantage of a baseboard is that it's quiet and trouble free. A tip over switch is standard so that if the heater is knocked over, it will shut off automatically. It has built-in thermostat and a 6 ft., 3-wire grounded outlet plug for additional safety. This heater is so rugged that it approved for U.S. government contracts.

• Built-In Thermostat To Control Comfort
• Aluminum Finned Crushproof Element
• Full length safety cutout
• All Angle Tip-Over Switch
• Quiet and Efficient Convection Heat
• 6 Foot Cord With Grounded Plug
• Lighted ON/OFF Power Switch
• Convenient Carry Handle On Back
• 1-year warranty

Electric Baseboard Heaters are an economical way to provide heat. They are typically used in apartment construction and other rental properties because of low initial cost and maintenance. Quality components guarantee a long-lasting, reliable heater. Not a plug-in model, heater safely hard-wires for 750 W at 120 V.

• Not a plug-in model, heater safely hard-wires for 750 W at 120 V
• Aluminum Ribbon Fin Element
• Full Length Safety Cutout
• Crushproof Element
• Natural Convection Heat
• Dent Resistant Die Form Cover
• 1 year warranty

A portable baseboard is an easy way to add supplementary heat to any room. The nice advantage of a baseboard is that it's quiet and trouble free. A tip over switch is standard so that if the heater is knocked over, it will shut off automatically. It has built-in thermostat and a 4 ft., 3-wire grounded outlet plug for additional safety. This heater is so rugged that it approved for U.S. government contracts.

• Convection heat
• Quiet running
• Built in thermostat
• Full length safety cutout
• Aluminum finned crushproof element
• All angle tip-over switch
• 6 ft. cord with grounded plug
• Lighted on/off power switch
• Convenient carry handle on back

The PSH is a higher power portable heater designed to provide a back-up heating source at an affordable price. Perfectly suited for a small workshop, garage or construction sites. The convenient 6 ft. cord allows greater mobility to areas needing heating. Easily set the desired temperature with the built-in thermostat. Sure, stop high-limit temperature control provides overheat protection. 120-Volt 1500-Watt may be plugged into standard NEMA 5-15 120-Volt outlet. Stainless steel construction.

• 120-Volt 1500-Watt may be plugged into a standard NEMA 5-15 120-Volt outlet
• Solid stainless steel construction
• High-limit temperature control
• Built-in thermostat