Electrical Boxes
Used to house wiring devices such as switches or outlets. Acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Nine 1/2 in. knockouts
- UL Listed
- 18.0 cu. in. capacity
- Plaster ears
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8 to 32 cover mounting screws assembled.
- TKO knockout design provides installation flexibility
- Combination screw heads allow quick installation
- Welded construction
- Ten 1/2 in. KNOCK OUT and 6 TKO KNOCK OUT
- UL Listed
- 21.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled. Suitable for use without a bonding jumper in circuits up to 600-Volt.
- Combination screw heads allow quick installation
- Welded construction
- (8) 1/2 in. knockouts and four TKO knockouts
- UL Listed
- 30.3 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Eight 1/2 in. knockouts
- UL listed
- 12.5 cu. in. capacity
- Plaster ears
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Welded construction
- Eleven 1/2 in. knockouts
- UL Listed
- 11.5 cu. in. capacity
- Acceptable in 2-hour fire rated walls
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Drawn construction
- (10) 1/2 in. knockouts
- UL Listed
- 13.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Welded construction
- Eleven 1/2 in. knockouts
- UL Listed
- 16.5 cu. in. capacity
Manufactured from durable pre-galvanized steel, and are designed to house and protect electrical wiring, switches, and receptacles. Captive device screws. cULus Listed.
- Made from zinc, pre-coated, steel
- Used where fixtures are installed
- 4.0 cu. in. capacity
- cULus Listed
Switch boxes are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls. Device mounting holes are pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 2-3/4 in. deep
- L clamps provided for non-metallic sheathed cable
- Includes TS bracket for mounting to metal or wood studs with 1/2 in. set back
- Gang able option
- 14 cu. in. capacity
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled. Suitable for use without a bonding jumper in circuits up to 600-Volt.
- Use with AC/MC or flexible cable
- Combination screw heads allow quick installation
- Welded construction
- (3) 1/2 in. knockouts, 1 TKO knockout and 4 cable payouts
- UL Listed
- 21.0 cu. in. capacity
- B style bracket, flush
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- (10) 1/2 in. knockouts and six 3/4 in. knockouts
- UL Listed
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
"Add-a-Depth" switch box ring allows you to adjust the depth of a switch box when it was incorrectly installed into the wall. The ring acts as a barrier between combustible wall surfaces and the wiring system. It has an adjustment range of 1/4 in. - 1 in.
- Steel construction
- Includes two 1-1/8 in. screws
- 1 or 2-gang device boxes
- Subject to acceptance by an electric inspector
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 2-3/4 in. D
- Six 1/2 in. knockouts
- Plaster ears for cut-in or old work applications
- Gangable option
- 14.0 cu. in. capacity
Used to cover handy boxes or as a wall plate for single gang boxes. Cover a single GFCI. Designed with rounded corners to match the contours of a handy box.
- Durable pre-galvanized steel construction
- Captive mounting screws included
- Cover measures 2-3/8 in. W x 4-1/4 in. tall
- Used with GFCI receptacle
RACO round ceiling pans are manufactured from durable pre-galvanized steel and designed to house and protect electrical wiring and to support light fixtures. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 cover mounting screws are assembled.
- 4 in. round x 1/2 in. deep
- "L" clamps provided for nonmetallic sheathed cable
- Rated for 50 lb. fixture support
- Does not support ceiling fans
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- Sixteen 1/2 in. knockouts
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
Raco 1-1/2 in. deep ceiling fan rated box is designed, tested, and UL listed for the dynamic loads of ceiling fans. Use this product when replacing an existing ceiling fan. Designed with the installer in mind, and rich in time saving features. A variety of products are available to meet nearly every application. Raco's Insider connector is included for use with non metallic sheathed cable.
- Durable pre-galvanized steel construction
- With proper fitting can be used for conduit, NMSC, armored, metal clad, or flex cable
- Plastic insider provided for nonmetallic sheathed cable
- 15.8 cu. in. capacity
- Maximum support load for ceiling fans 70 lbs. and 110 lbs. at 16 in. for static light fixtures
- Mounting hardware and instructions are included
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 1-1/2 in. Deep
- Non-gangable
- L clamps provided for non-metallic sheathed cable
- Plaster ears for cut-in or old work applications
- 7.5 cu. in. capacity
Ceiling Support Boxes are specifically designed for ceiling fan and ceiling or wall light fixture support. #10-32 ceiling fan screw provided and #8-32 ceiling fan fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws allows easy installation
- Metal protection plate eliminates debris or damage to wiring
- Easy to follow instructions and mounting hardware included
- Pan cover protects wiring after installation
- Rated 70 lbs. ceiling fan, 150 lbs. fixture support
- UL Listed
Masonry Boxes are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles in masonry walls. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. Knockouts for conduit connectors and mounting holes are designed to resist slurry from entering box.
- Welded steel construction
- Supplied with eight 1/2 in. and 3/4 in. concentric knockouts
- Standard device spacing with tapped 6-32 holes for devices
- 22.5 cu. in. capacity
Provides additional cubic capacity. May be used an outlet box for surface conduit. Constructed from pre-galvanized steel.
- 4 in. x 1-1/2 in. D
- Drawn steel construction
- Supplied with 2-1/2 in. and 2-3/4 in. knockouts
- Combination Phillips/slotted screw heads
- 15.5 cu. in. capacity
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches and receptacles. UL listed and acceptable for use in 2-hour fire rated walls. Device mounting holes are pre-tapped to accept 6-32 device screws.
- Fourteen 1/2 in. and 3/4 in. concentric knockouts
- Standard device spacing with tapped 6-32 holes for devices
- Welded construction
- 60.0 cu. in. capacity
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Used with AC/MC/Flex cable
- Gangable
- (1) 1/2 in. knockout
- UL Listed
- 12.5 cu. in. capacity
- Pester ears, old work, Griptite
RACO KWIK-BRACE is a heavy-duty ceiling fan brace designed for new or existing construction where joists are accessible. Slides apart to accommodate joist spacing from 16" to 24" screws provided. Easy to follow instructions and mounting hardware included.
- #10-32 ceiling fan screws provided and #8-32 ceiling fixture mounting provision, metal protection plate provided
- Nail spurs for easy positioning
- Up-front ground screws for easy installation
- Easy to follow instructions and mounting hardware included