Electrical Boxes
The Vertical 21 cu in. PVC 1-Gang Wall Box Adjust-a-box with Adjustable Bracket for Vertical Mount is designed to allow adjustment of depth after the wall covering has been installed. Adjusts to any wall covering. The Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Typical uses are in kitchens and bathrooms
- Protects indoor wiring from impacts, dust and wear
- Thermoplastic construction resists rust and won't conduct electricity
- Mounts to standard wood or metal stud horizontally
- Convenient adjustable bracket for ease of installation
- UL Listed
The 14 cu. in. PVC Old Work Electrical Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. This item is great for light commercial and residential applications. The box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- For residential and commercial old work applications including masonry walls
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- UL Listed and 2-hour fire rating for safety
Used to house wiring devices such as switches or outlets. Steel boxes are acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Eight 1/2 in. knockouts
- UL listed
- 12.5 cu. in. capacity
- Plaster ears
Used to house wiring devices such as switches or outlets. Acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Nine 1/2 in. knockouts
- UL Listed
- 18.0 cu. in. capacity
- Plaster ears
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled. Suitable for use without a bonding jumper in circuits up to 600-Volt.
- Combination screw heads allow quick installation
- Welded construction
- (8) 1/2 in. knockouts and four TKO knockouts
- UL Listed
- 30.3 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
The Carlon Zip Box Blue 1-Gang 22 cu. in. Non-Metallic Switch and Outlet Box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. Great for residential and light commercial applications, the box is made with PVC, is listed for use with masonry walls and can be used with 90 degree C conductors. It meets NEMA OS-2 and is fire rated and UL Listed for safety.
- Use in new construction applications or masonry walls
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Thermoplastic construction resists rust and won't conduct electricity
- Installs easily with the captive nails (included)
- Comes with 4-integral clamps that holds wire in place
- UL-Listed
Non-metallic boxes feature PVC construction for easier installation, greater performance and lower installation cost. Designed and listed for use with non-metallic sheathed cable in accordance with Article 314 of the National Electrical Code. They make fast work of any residential or light commercial application.
- Patented design allows for adjustment from 0 in. to 1-3/4 in. after installation
- Ideal for new work or retrofit (old work) applications
- Ideal for various drywall thicknesses and wall finishes
- Designed and listed for use with non-metallic sheathed cable in accordance with article 314 of the national electrical code
- All PVC boxes are permissible for use with 90 degree C connectors
The Carlon Zip Box Blue 2-Gang 25 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- Residential and commercial use
- Use with non-metallic cable on accordance with code
- Thermoplastic construction resists rust and won't conduct electricity
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Built-in cable clamps hold wires firmly in place
- For safety, product is UL Listed and fire rated
The Carlon Zip Box Blue 2-Gang 32 cu. in. Non-Metallic Switch and Outlet Box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made with PVC, is listed for use with masonry walls and can be used with 90 degree C conductors. It meets NEMA OS-2 and is fire rated and UL listed for safety.
- Use with switches and outlet devices in new work applications where the wall is not already installed
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Captive nails included
- UL Listed
- 2-hour fire rating
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Drawn construction
- (10) 1/2 in. knockouts
- UL Listed
- 13.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
Square boxes are manufactured from durable pre-galvanized steel and designed to house and protect electrical wiring, switches, receptacles and to support light fixtures. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 cover mounting screws are assembled.
- 4-11/16 in. square x 2-1/8 in. deep
- (1) 1/2 in. and fifteen TKO knockouts
- Combination Phillips/slotted screw heads
- Welded steel construction
The Carlon 1-Gang 18 cu. in. round old work ceiling box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for residential and light commercial applications, the box is made of Polycarbonate, is listed for use with dry wall or sheet rock. The box is fire rated and UL Listed for safety.
- 1-gang electrical box houses an installed ceiling switch or receptacle
- Not intended for fixture or support in ceilings
- Thermoplastic construction resists rust and won't conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears and swing clamps provide versatile installation options
- Sized for standard devices and switches
The Carlon Zip Box Blue 1-Gang 20 cu. in. Non-Metallic Switch and Outlet Box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. Great for residential and light commercial applications, the box is made with PVC, is listed for use with masonry walls and can be used with 90 degree C conductors. It meets NEMA OS-2 and is fire rated and UL Listed for safety.
- Use in residential and light commercial applications
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Thermoplastic construction resists rust and won't conduct electricity
- Captive nails included
- Mount in steel or wood studs, suitable for masonry walls
- UL Listed and has a 2-hour fire rating
BELL offers a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. Reinforced connector outlets provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included.
- State of the art powdercoat finish provides maximum weatherability and scratch resistance
- Rugged die cast aluminum construction
- Internal hub threads comply with NEMA requirements and will accept all threaded fittings and threaded conduit
- 8-box mounting options with detachable lugs
- 18.3 cu. in. capacity
- 2 in. deep
- NEMA 3R compliant
The Zip Box Blue 3-Gang 44 cu. in. Non-Metallic Switch and Outlet Box is designed for use with non-metallic sheathed cable in accordance with article 314 of the NEC. Great for residential and light commercial applications, the box is made with PVC, is listed for use with masonry walls and can be used with 90 degree C conductors. It meets NEMA OS-2 and is fire rated and UL listed for safety.
- For use in residential and light commercial new construction
- Use with non-metallic sheathed cable in accordance with article 314 of the NEC
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Captive nails included
- UL listed
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8 to 32 cover mounting screws assembled.
- TKO knockout design provides installation flexibility
- Combination screw heads allow quick installation
- Welded construction
- Ten 1/2 in. KNOCK OUT and 6 TKO KNOCK OUT
- UL Listed
- 21.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
The Carlon Zip Box Blue 1-Gang 20 cu. in. Non-Metallic Ceiling Box is designed for use with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. Great for residential and light commercial applications, the box is made with polycarbonate, is listed for use with masonry walls and can be used with 90 degree C-conductors. It meets NEMA OS-2 and is fire rated and UL Listed for safety.
- Use to support fixtures up to 50 lbs.
- Not intended for fan support
- Thermoplastic construction resists rust and won't conduct electricity
- Installs with captive nails, ground lug and screw (included)
- Built-in cable clamps hold wires firmly in place
- UL Listed
Ceiling Support Boxes are specifically designed for ceiling fan and ceiling or wall light fixture support. #10-32 ceiling fan screw provided and #8-32 ceiling fan fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws allows easy installation
- Metal protection plate eliminates debris or damage to wiring
- Easy to follow instructions and mounting hardware included
- Pan cover protects wiring after installation
- Rated 70 lbs. ceiling fan, 150 lbs. fixture support
- UL Listed
RACO KWIK-BRACE is a heavy-duty ceiling fan brace designed for new or existing construction where joists are accessible. Slides apart to accommodate joist spacing from 16" to 24" screws provided. Easy to follow instructions and mounting hardware included.
- #10-32 ceiling fan screws provided and #8-32 ceiling fixture mounting provision, metal protection plate provided
- Nail spurs for easy positioning
- Up-front ground screws for easy installation
- Easy to follow instructions and mounting hardware included
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- (10) 1/2 in. knockouts and six 3/4 in. knockouts
- UL Listed
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
Ceiling support boxes are designed for ceiling fans and ceiling or wall light fixture support. To be directly mounted to a joist. #10-32 ceiling fan and #8-32 provision for fixture mounting screws. Easy installation, up-front ground screw.
- No protruding ground screw or fan mounting screws
- Metal protection plate eliminates debris or damage to wiring
- INSIDER nonmetallic sheathed cable connector included
- 70 lbs. ceiling fan, 150 lbs. fixture support
- Easy-to-follow instructions and mounting hardware included
- 1-1/2 in. deep
- 1/2 in. side knockout
The PVC 2-Gang Nail-On New Work Outlet Box, Volume 36 cu. in. Box is mounted with Compound Angled Nails, with 3/8 in. Offset Wallboard Tabs Molded V-Clamp. PVC construction for easier installation, greater performance and lower installation cost.
- Volume 36 cu. in.
- Compound angled nails
- 3/8 in. offset wallboard tabs molded V-clamp
- UL E11461
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled.
- Ideal for exposed work applications
- Combination screw heads allow quick installation
- Drawn construction
- (16) 1/2 in. knockouts
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches, and receptacles. UL Listed and acceptable for use in 2-hour fire rated walls. Device mounting holes pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 2-3/4 in. D
- Six 1/2 in. knockouts
- Plaster ears for cut-in or old work applications
- Gangable option
- 14.0 cu. in. capacity
Surface mounted enclosure without entrance hubs which allows multiple conduits to be connected and wire splices made within. Appropriate round hole for conduit entrance must be cut. Male adapters or box adapters may be used to secure conduits to the box. May be concrete encased or buried but not warranted or listed to be watertight for all circumstances.
- 2 in. x 12 in. x 4 in.
- Corrosion resistance and physical properties needed for direct burial applications
- NEMA 6P rating per section 314
- UL E88685
BELL offers a selection of weatherproof boxes that are made of rugged, seamless die-cast construction which will not allow entry of moisture. Boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Rugged die-cast aluminum construction
- State-of-the-art powdercoat finish provides maximum weather-ability and scratch-resistance
- 18.3 cu. in. capacity
- NEMA 3R rated
High impact resistant thermoplastic Round Floor Box cover. Non-Metallic, for use with Duplex Devices. Compatible with standard NEMA duplex and 1-1/2 in. NPS receptacles.
- Compatible with standard NEMA duplex and 1-1/2 in. NPS receptacles
- Approved for all types of finish flooring
- UL scrub water tested
- UL E11461
The Super Blue New Work Round 25 cu. in. Non-Metallic Hard-Shell Ceiling Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated and UL listed to help ensure safety.
- Listed for use with fixture support up to 50 lb.
- Designed to not break or crack, even in extreme environments
- Captive nails for wood stud mounting
- 3/0 and 4/0 mounting holes
- UL listed and 2-hour fire rating
The Carlon Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box is designed to work with non-metallic sheathed cable in accordance with Article 314 of the National Electric Code. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Use for old work applications in residential or commercial remodeling projects
- Designed for use with non-metallic sheathed cable and listed for masonry walls
- Sized for standard devices and switches and extra capacity for wiring and larger devices
- Thermoplastic construction resists rust and will not conduct electricity
- Built-in cable clamps hold wires firmly in place
- Mounting ears, swing bracket and captive nails provide wide range of installation options
- PVC construction is classified for 2-hour fire wall rating
- Meets NEMA OS-2, UL listed UL514C, E11461 and R9140
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in. pre-galvanized steel. 8-32 cover mounting screws assembled. Suitable for use without a bonding jumper in circuits up to 600-Volt.
- TKO knockout design provides installation flexibility
- FS style bracket, flush
- Welded construction
- (9) 1/2 in. knockouts and five TKO knockouts
- UL Listed
- 21.0 cu. in. capacity
- Acceptable in 2-hour fire rated walls
The Junction Box provides protection against falling dirt, hose-directed water, external ice formation and the entry of water during prolonged submersion. It is made with plastic and features a gasketed lid attached with stainless-steel screws. The box is UL Listed with a NEMA 6P rating per section 314.29, exception of the NEC.
- For indoor and outdoor use
- Plastic construction
- Gasketed lid attached with stainless-steel screws
- Designed to not rust or corrode
- NEMA type 6P and type 4/4 ratings
- UL listed to help ensure safety
BELL offers a selection of weatherproof boxes made of rugged, seamless die-cast construction that does not allow entry of moisture. Reinforced connector outlets provide a secure mechanical installation. Internal threads on hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Where applicable, installation hardware and ground screws are included.
- Rugged die-cast aluminum construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch-resistance
- 30.2 cu. in. capacity
- NEMA 3R rated
- Includes 2 closure plugs
Made of rugged, seamless die-cast construction which will not allow entry of moisture. Reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included.
- Rugged diecast aluminum construction
- State-of-the-art powder coat finish provides maximum weather-ability and scratch-resistance
- 18.3 cu. in. capacity
- NEMA 3R rated
The Super Blue New Work 1-Gang 22 cu. in. Non-Metallic Hard-Shell Switch and Outlet Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated and UL listed to help ensure safety.
- Use in new construction applications
- Sized for standard devices and switches and extra capacity for wiring and/or larger devices
- Designed to not break or crack, even in extreme environments
- Captive nails for wood stud mounting
- UL listed
- 2-hour fire rating
The Vertical 49 cu. in. PVC 3-Gang Wall Box Adjust-a-box with Adjustable Bracket for Vertical Mount is designed to allow adjustment of depth after the wall covering has been installed. Adjusts to any wall covering. Designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL Listed to help ensure safety.
- Ideal for various drywall thicknesses and wall finishes
- Includes mounting hardware
- Convenient adjustable bracket for ease of installation
- Adjusts from 0 in. to 1-3/4 in. D
- Thermoplastic construction resists rust and won't conduct electricity
- UL Listed and 2-hour fire rating for safety
The Carlon Super Blue New Work Round 14.5 cu. in. Non-Metallic Hard-Shell Ceiling Box is designed to not break or crack, even in extreme conditions. It is made with thermoplastic PVC for durability. Its hard-shell resists flexing and holds its shape in bad conditions and the box is fire rated to help ensure safety.
- Designed to not break or crack, even in extreme environments
- Made of heat-resistant thermoplastic material
- Captive nails for wood stud mounting
- 3/0 and 4/0 mounting holes
- 2-hour fire rating
Switch boxes are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls. Device mounting holes are pre-tapped to accept 6-32 device screws.
- 3 in. x 2 in. x 2-3/4 in. deep
- L clamps provided for non-metallic sheathed cable
- Includes TS bracket for mounting to metal or wood studs with 1/2 in. set back
- Gang able option
- 14 cu. in. capacity
Designed for use in branch circuit wiring in wet, damp or dry locations. Boxes house receptacles, switches and GFCI's. May also be used as a weatherproof junction box. Closure plugs and installation hardware included. Ground screw installed.
- State-of-the-art powdercoat finish provides maximum weatherability and scratch-resistance
- 8-box mounting options with detachable lugs
- 18.3 cu. in. capacity
- NEMA 3R compliant
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Welded construction
- Eleven 1/2 in. knockouts
- UL Listed
- 11.5 cu. in. capacity
- Acceptable in 2-hour fire rated walls
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Welded construction
- Eleven 1/2 in. knockouts
- UL Listed
- 16.5 cu. in. capacity
BELL offers a selection of weatherproof boxes made of rugged, seamless die-cast construction which will not allow entry of moisture. Boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Rugged diecast aluminum construction
- State-of-the-art powdercoat finish provides maximum weather-ability and scratch-resistance
- 18.3 cu. in. capacity
- NEMA 3R rated
The Junction Box features a foam-in-place gasketed lid with stainless steel screws. It is designed to provide protection against falling dirt, hose-directed water, water entry during prolonged submersion and external ice formation. The box is made with a thermoplastic material and is CSA and UL listed to help ensure safety.
- Protects against external ice, dirt and water
- Features a formed-in-place foam gasket lid
- CSA and UL listed and suitable for both indoor and outdoor use
- Designed to not rust or corrode
- NEMA type 6P and type 4/4 ratings
- CSA and UL listed for safety
Bell offers a selection of weatherproof boxes that are made of rugged, seamless die-cast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Rugged die-cast aluminum construction
- State-of-the-art powdercoat finish provides maximum weather-ability and scratch-resistance
- 16.0 cu. in. capacity
- NEMA 3R rated
RACO Extension Rings provides additional cubic capacity. Constructed from 1/16 in. pre-galvanized steel. Can be used as an outlet box for surface conduit. .
- Combination screw heads allow quick installation
- Drawn construction
- Eight 1/2 in. knockouts and four 3/4 in. knockouts
- 22.5 cu. In. capacity
Designed with the electrician in mind. The Original Smart Boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. They are unmatched in old or retrofit work.
- Available in 1, 2, 3 and 4-gang and horizontal
- Step down feature allows for wire entrance in both top and bottom of box
- Heavy-duty 42 lbs. mounting screws supplied
- Mounts to wood or metal stud 25 g
- Adjustable depth
- Extra thick PVC wall material creates stability and rigidity
- Built-in wire clamps
- All 6/32 device holes are threaded
- RoHS compliant
- UL listed
- Material: PVC
The 1-Gang Non-Metallic Duplex Cover is designed for use with round floor boxes. It is made with a high-impact thermoplastic material for durability and features 3/8 in. drill points for Low-Voltage cable pass-through. It is CSA and UL listed to help ensure safety.
- For use with round floor boxes
- For tile and carpet applications
- High-impact thermoplastic construction
- 3/8 in. drill points provided for low-voltage cable pass-through
- Approved for use on all finish flooring
- UL scrub water tested
RACO round ceiling pans are manufactured from durable pre-galvanized steel and designed to house and protect electrical wiring and to support light fixtures. All steel boxes are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. 8-32 cover mounting screws are assembled.
- 4 in. round x 1/2 in. deep
- "L" clamps provided for nonmetallic sheathed cable
- Rated for 50 lb. fixture support
- Does not support ceiling fans
We offer a selection of weatherproof boxes that are made of rugged, seamless diecast construction which will not allow entry of moisture. The boxes have reinforced connector outlets to provide a secure mechanical installation. Where applicable, installation hardware and ground screws are included. Bilingual instructions provided with every product.
- Rugged diecast aluminum construction
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance
- 16.0 cu. in. capacity
- NEMA 3R rated