Pvc Conduit Fittings
Use the 2 in. Non-Metallic Male Terminal Adapter to adapt Sch. 40 and Sch. 80 rigid non-metallic conduit to threaded fittings and metallic systems. Non-metallic PVC resists corrosion, rust, impact and damage due to exposure to sunlight. The socket end attaches to a socket fitting using solvent cement.
- Adapts non-metallic conduit to threaded fittings and metallic systems
- Non-metallic PVC is heat, fire and corrosion resistant
- Designed for use with Sch. 40 and Sch. 80 non-metallic rigid conduit
- UL and CSA listed for safety and peace of mind
- Socket fitting attaches using solvent cement
3/4 in. PVC non-metallic coupling can be used with Schedule 40 and Schedule 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are non-conductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Can be used to join rigid non-metallic conduit (RNC)
- Compatible with schedule 40 and schedule 80 rigid non-metallic conduit (RNC)
- For use in aboveground and underground applications as well as exposed outdoor usage
- Durable PVC construction means no rusting or corroding
- Weighing less than metallic systems means more efficient and quicker installation time
- UL listed
The 1 in. Non-Metallic Standard Coupling is designed for joining non-metallic conduit. It is made with PVC and is compatible with Schedule 40 and Schedule 80 RIGID non-metallic conduit (RNC). The coupling should be attached using solvent cement and is CSA and UL listed to help ensure safety.
- Designed for joining non-metallic conduit
- Compatible with schedule 40 and schedule 80 RNC
- PVC construction
- Should be attached using solvent cement
- CSA and UL listed for safety
The 3/4 in. Access Pull Elbow enables the pulling of wires through a wall to be directed in 2 separate directions. This pull elbow is compatible with rigid non-metallic conduit. Access pull point for cable in tight radius.
- Can pull wiring in two different directions quickly and easily
- Allows for conduit changes in direction
- Durable PVC construction will not rust or corrode
- Adapter is threaded
PVC non-metallic fittings can be used with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. Fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are nonconductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Use with schedule 40 and 80 conduit
- UL E23018
- Material PVC
- Color gray
3/4 in. PVC non-metallic fitting can be used with sch. 40 and sch. 80 rigid non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are non-conductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Can be used to join Rigid Non-Metallic Conduit (RNC)
- Compatible with schedule 40 and schedule 80 RIGID non-metallic conduit (RNC)
- For use in aboveground and underground applications as well as exposed outdoor usage
- Durable PVC construction means no rusting or corroding
- Weighing less than metallic systems means more efficient and quicker installation time
- UL listed
The 1 in. Non-Metallic Terminal Adapter is designed for use with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). It features male threads at 1 end and a socket end at the other and the adapter is made with PVC. It is CSA and UL listed to help ensure safety.
- For use with schedule 40 and 80 conduit
- Material PVC
- Color gray
- UL E23018
The 3 in. Non-Metallic Terminal Adapter is designed for use with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). It is made with PVC and features male threads on 1 end and a socket head on the other. The adapter is used for adapting non-metallic conduits to threaded fittings and metallic systems.
- Compatible with Sch. 40 and Sch. 80 rigid non-metallic conduit
- 3 in. male terminal adapter
- PVC construction for durable performance
- PVC construction
- Male threads and socket head on opposite ends
- CSA and UL Listed for safety
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- Listed for use in exposed and outdoor usage
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- listed for use in exposed and outdoor usage
The 2 in. Non-Metallic Standard Coupling is crafted with PVC for durability. Suitable for indoor and outdoor use. Should be used with solvent cement. Using fittings with Non-metallic conduit insures system integrity.
- Designed to join non-metallic conduit
- PVC construction
- Works with schedule 40 and schedule 80 conduit
- CSA and UL listed for safety
- Should be attached using solvent cement
The non-conductive 3/4 in. Non-Metallic Type LB Conduit Body has a textured lid and a foam in-place gasket. Suitable for indoor and outdoor use, this conduit body hub is made of unthreaded PVC. Item is UL and CSA listed for safety.
- Compatible with rigid non-metallic conduit (RNC)
- Made of non-corrosive PVC
- Maximum operating temperature of 120 degree F
- Can be used for indoor and outdoor applications
- UL and CSA listed
1/2 in. PVC non-metallic coupling can be used with Schedule 40 and Schedule 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. fittings ensure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are nonconductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Can be used to join rigid non-metallic conduit (RNC)
- Compatible with schedule 40 and schedule 80 rigid non-metallic conduit (RNC)
- For use in aboveground and underground applications as well as exposed outdoor usage
- Durable PVC construction means no rusting or corroding
- Weighing less than metallic systems means more efficient and quicker installation time
- UL listed
The 1-1/4 in. Non-Metallic Male Terminal Adapter is a high-quality versatile fitting designed for use with Sch. 40 and Sch. 80 rigid non-metallic conduit. Non-metallic PVC resists rust, corrosion, impact and the damaging effects of sunlight. The socket end attaches to a socket fitting using solvent cement.
- For use with schedule 40 and 80 conduit
- Color in gray
- Material PVC
- UL E23018
The 3 in. Schedule 40 Non-Metallic 90 degree Elbow has a belled end and a standard bend radius. This item is designed for both above and below ground applications. This item is also UL and ETL Listed for safety.
- Enables a 90 degree change of directions in a run of conduit
- Belled end allows for easy joining of conduit
- Compatible with Sch. 40 rigid non-metallic conduit
- Resists rust and corrosion
- Listed for exposed and outdoor usage
- UL and ETL Listed for safety
- Belled end
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- listed for use in exposed and outdoor usage
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with Sch. 40 rigid non-metallic conduit
- Resists rust and corrosion
- Listed for use in exposed and outdoor usage
The 1/2 in. Non-Metallic Conduit Body is a non-threaded electrical fitting. The PVC fitting will never rust and has a textured lid with a foam in-place gasket. This fitting can function in either indoor or outdoor settings.
- Made of non-corrosive PVC
- Rigid, non-metallic and non-conductive
- Compatible with rigid non-metallic conduit (RNC)
- Not threaded
- UL and CSA listed
The 2 in. Type LB Nonmetallic Conduit Body has a non-threaded body. Made of rigid PVC. Conduit is non-conductive and non-corrosive. Easy application.
- Textured lids
- Foam-in-place gasket
- Compatible with RNC-type conduits
- UL and CSA listed for safety
The 3 in. Non-Metallic Standard Coupling is a socket for joining non-metallic electrical conduits. Made from non-metallic PVC, the socket is designed for use with RNC-type Sch. 40 and Sch. 80 conduits. The socket should be attached using solvent cement (not included). UL Listed for safety.
- Joins non-metallic electrical conduits
- Non-metallic PVC for durability
- Compatible with RNC-type schedule 40 and schedule 80 conduits
- UL listed for safety
- Should be attached using solvent cement (not included)
The 2 in. Non-Metallic Meter Offset is a high-quality fitting designed for indoor and outdoor use. Non-metallic PVC resists rust, corrosion, impact and the damaging effects of sunlight. The meter offset features external ridges for containment in concrete and can be used with sch. 40 and sch. 80 conduit.
- Brings electrical service into a meter box
- Non-metallic PVC is heat, fire and corrosion resistant
- Compatible with sch. 40 or sch. 80 conduit
- Ridges on the outside for concrete encasement
- UL Listed for safety and peace of mind
- Socket on 1 end with threads on offset for easy installation
PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- Listed for use in exposed and outdoor usage
The 1/2 in. Female Adapter is designed for use with RIGID non-metallic conduit (RNC). The adapter is crafted with PVC, works indoors and outdoors and is CSA and UL Listed to help ensure safety. It has female threads on one end, socket end on the other.
- For use indoors and outdoors
- Compatible with RNC
- PVC construction
- CSA and UL Listed for safety
The 1 in. Type LB Non-Metallic Conduit Body is designed for use with rigid non-metallic conduit (RNC). It is made with non-corrosive PVC for durability and features non-threaded hubs and a textured lid with a foam-in-place gasket. The conduit body is UL listed for safety.
- For use with RNC
- Suitable for indoor and outdoor use
- Non-corrosive PVC construction
- Non-threaded hubs
- Textured lid with foam-in-place gasket
- UL listed to help ensure safety