Conduit, Fittings & Raceways
Bond flexible metal conduit (FMC) to a steel outlet box or other metal enclosure with this 3/8 in. 90 degree Flex Connector. The Tri Drive screws are compatible with Phillips, slotted and square screwdrivers. This connector meets UL and CSA requirements.
- Connects and bonds FMC and armored cable to metal enclosures
- Body and locknut made of high-strength, corrosion-resistant zinc alloy
- Screw and clamp made of galvanized steel
- Fits in a standard 1/2 in. knockout
- Tri-drive screw head is compatible with Phillips, slotted and square screwdrivers
- UL and CSA Listed
- Reversible locknut designed to cut through protective coatings on boxes and enclosures to ensure ground continuity
- For indoor use only
The Electrical Box Extender lends support to the contents of a wall box. This non-conductive extender helps prevent arcing by forming a barrier between the box and the metal screws on the device. This box extender has a 2-hour fire rating.
- Levels and supports wiring devices in an electrical box
- Helps prevent arcing by forming a barrier between a metal box and metal side screws on the device
- Heavy-duty, non-conductive plastic construction
- UL and CSA safety listings
- Complies with 2008 NEC Article 314.20
Southwire ground clamps are used to connect copper ground wire to a water pipe, copper tubing or ground rods. Product is suitable for direct burial. Suitable for use with # 10 STR - # 2 STR Wire.
- cULus listed
- Wire range: # 10 STR - # 2 STR
- 1/2 in. - 1 in. clamp size
- 1-pack
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
This 3/4 in. x 10 ft. Electric Metallic Tube Conduit protects your cables from magnetic fields, impact damage and crushing. The heavy-duty steel conduit resists splitting, kinking and flattening and is coated with zinc for corrosion resistance. Allied conduit has an E-Z pull interior coating provides a smooth surface for faster wire pulling.
- Protects insulated electrical conductors and cables from magnetic fields, impact damage and crushing
- E-Z pull interior coating provides a smooth surface for faster wire pulling
- Excellent mechanical protection for conductors
- Ductility for faster and easier bending
- High grade mild strip steel for durability and longer life
- Listed to underwriter's laboratories safety standard UL 797
- Manufactured in accordance with ANSI C80.3
The 1 in. x 3/4 in. Reducing Bushing is die cast of durable zinc alloy and suitable for indoor use only. The bushing is designed to reduce the entry size of a run of threaded rigid conduit or intermediate metal conduit (IMC). UL and CSA listed for safety and peace of mind.
- Reduces the run entry size of threaded rigid conduit and IMC
- Zinc alloy is high strength and non-corrosive
- Compatible with rigid conduit and IMC
- Designed for indoor use only
Turn to the 3/8 in. Twin Screw Non-Metallic Cable Clamp Connectors (5-Pack) to join non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures. A reversible locknut cuts through protective coatings on boxes and enclosures to preserve grounding. This connector meets UL and CSA requirements.
- Connect non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures
- Body and locknut are die-cast of high-strength zinc alloy
- Zinc-plated steel clamp and screws
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- Fits 1/2 in. knockout
- For indoor use only
- Screws compatible with Phillips, slotted and square screwdrivers
- Resists corrosion
- UL and CSA safety listings
Southwire's Non-Metallic Liquid Tight Connectors are made to use with Type B Non-Metallic Liquid Tight Conduit. There is no threading of conduit or tubing required. Southwire's connectors give a superior liquid tight seal and pull out strength. Comes in a 20-piece carton.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Arlington's 1/2 in. Non-Metallic Liquid-Tight Push-On Connector is constructed of UV-rated plastic for a long-lasting, outdoor life. The connector is compatible with non-metallic, liquid-tight, type B conduit. It has push-on installation.
- Use with non-metallic, type B conduit
- UV-rated plastic construction
- Indoor or outdoor use
- NEMA FB-1 and CSA- and UL Listed
- Liquid-tight connection
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
This 1/2 in. x 10 ft. Electric Metallic Tube Conduit protects your cables from magnetic fields, impact damage and crushing. The heavy-duty steel conduit resists splitting, kinking and flattening and is coated with zinc for corrosion resistance. Allied conduit has an E-Z pull interior coating provides a smooth surface for faster wire pulling.
- Protects insulated electrical conductors and cables from magnetic fields, impact damage and crushing
- E-Z pull interior coating provides a smooth surface for faster wire pulling
- Excellent mechanical protection for conductors
- Ductility for faster and easier bending
- High grade mild strip steel for durability and longer life
- Listed to underwriter's laboratories safety standard UL 797
- Manufactured in accordance with ANSI C80.3
The 1/2 in. 90 degree Connector connects and effectively bonds flexible metal conduit (FMC), Mc and Ac to a steel outlet box or other metal enclosure in a right-angled connection. It is made of galvanized steel and designed to ensure ground continuity. This connector meets UL and CSA requirements.
- Secures FMC, Ac and Mc to metal enclosures at a right angle
- Made of corrosion-resistant galvanized steel
- UL and CSA Listed
- Reversible locknut cuts through protective coatings to create a grounded installation
- Screw's tri-drive head design will work with Philips, slotted and square screwdrivers
- Locknut is reversible and it is designed to cut through protective coatings on boxes and enclosures to assure ground continuity
- Corrosion resistant
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Southwire ground rod clamps are used for connecting conductors to ground rods or rebar. This copper alloy clamp is suitable for direct burial. This clamp is specified for use with #10 SOL/STR - #2 STR Wire.
- cULus Listed
- Wire range: # 10 SOL/STR - # 2 STR
- Fits 5/8 in. grounding rod or 1/2 in. rebar
- Suitable for direct burial
- 1-pack
The Blackburn 1/2 in. - 1 in. Type-J Bronze Ground Clamp connects a ground conductor to a water pipe or copper tube. This ground clamp offers corrosion-resistant screws and a highly conductive copper alloy construction. Cast Bronze Ground Clamp for Wire Range 10 - 2.
- Similar to aluminum water pipe clamp, but lighter in construction
- Ground pipe clamp
- Grounding devices or assemblies
- 1/2 in. - 1 in. tier
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
The 1 in. Twin-Screw Clamp Connector is designed to connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure. Corrosion resistant. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Connects non-metallic sheathed cable and flexible cord to metal enclosures
- Made of corrosion-resistant zinc alloy and galvanized steel
- Tri-drive screw-head design works with any screwdriver
- Reversible locknut is designed to cut through protective coatings and form a grounded connection
- UL and CSA Listed
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90° Celsius conductors
- Made in USA
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
The 3/4 in. ENT Snap-on Male Adapter snaps onto electrical non-metallic tubing (ENT) and into a knockout box. Designed for use to connect electrical non-metallic tubing (ENT) and ENT quick set cement, the adapters are suitable for damp locations. The 1-piece quick connect design make installation of this adapter quick, easy and safe.
- 3/4 in. ENT male adapter for connecting Electrical Non-Metallic Tubing (ENT)
- Adapter is compatible with ENT when used with ENT cement
- Durable PVC construction is non-corrosive, non-conductive and suitable for damp locations
- Snap-in adapters on both ends for quick and easy installation
- UL listed
- Suitable for damp locations
Rely on 1 in. EMT 1-Hole Straps (4-Pack) for assurance that EMT conduit is safely installed. These zinc-plated straps snap on and help with load bearing. Positively snaps onto the conduit.
- Secures EMT conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- For indoor or outdoor applications
3/4 in. PVC non-metallic fitting can be used with sch. 40 and sch. 80 rigid non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are non-conductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Can be used to join Rigid Non-Metallic Conduit (RNC)
- Compatible with schedule 40 and schedule 80 RIGID non-metallic conduit (RNC)
- For use in aboveground and underground applications as well as exposed outdoor usage
- Durable PVC construction means no rusting or corroding
- Weighing less than metallic systems means more efficient and quicker installation time
- UL listed
Non-Metallic straight snap2It connector for use with non-metallic liquid tight conduit type B only. They offer the fastest, easiest installation. You'll get a super-secure, liquid-tight seal. Plus, they are removable and reusable.
- 3/4 in. trade size
- Easy to install, pushes on to conduit, no tools
- Connectors are produced from UV rated plastic for long outdoor life
- UL CSA Listed
Use the 3/4 in. 1-Hole Conduit Straps (4-Pack) to support EMT conduits when a greater load bearing is required. The conduit straps are made of zinc-plated steel and are corrosion resistant. This strap meets UL and CSA requirements.
- Designed to secure EMT conduit to wood, masonry or a similar surface where a greater load bearing is required
- Indoor or outdoor use
- Made of zinc-plated steel
- UL and CSA Listed
- Snaps on the conduit when installed
- Corrosion resistant
The 3/4 in. Twin-Screw Clamp Connectors (5-Pack) are designed to connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure. They are ideal for service entrances or other indoor applications. This clamp connector meets UL and CSA requirements.
- Connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure
- Corrosion-resistant zinc diecast construction
- Reversible locknut is designed to cut through protective coatings to assure ground connectivity
- UL and CSA Listed
- Tri-drive screw design works with all screwdrivers
- Locknut is reversible, it is designed to cut through protective coatings on boxes and enclosures to assure ground continuity
- Corrosion resistant
The 2 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. They provide a grounded connection and are suitable for indoor applications. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secure rigid and IMC conduit or threaded fittings to metal electrical enclosures
- Made of galvanized steel
- Exceed UL 514B requirements
- Cut through protective coatings on boxes to assure ground continuity
This 1/2 in. Nylon Connector ensures a liquid- and oil-tight seal thanks to a sealing ring and internal grommet with gripping fingers. This connector is also low-profile and non-metallic. It supports a 0.200 to 0.472 cord range.
- Internal grommet with gripping fingers ensures a liquid- and oil-tight seal
- Sealing ring for a liquid-tight seal when installing non-threaded openings
- Great pullout resistance from simply tightening the nut
- UL and CSA Listed
- Made of nylon
Save time and money with SNAP2IT fittings. They offer the fastest, easiest installation on liquid-tight conduit. NMLT905-1 is a 1/2 in. liquid tight 90° connector.
- Put your tools away, to install the NMLT905-1 simply push on to conduit, that's it
- You'll get a super-secure, liquid-tight seal, plus the NMLT905-1 is removable and reusable
- NMLT905-1 is UL and CSA Listed
- NMLT905-1 is for non-metallic liquid-tight conduit (type B)
Knock-Out Seals are designed to cover exposed knock-out holes in steel boxes and other metal enclosures. The 1/2 in. Knock-Out Seals (4-Pack) offer corrosion resistance. They are convenient and easy to use.
- Covers knock-out holes in metal enclosures
- Zinc-plated steel
- Corrosion resistant
- Designed for indoor and outdoor use
The Blackburn 1/2 in. and 5/8 in. Ground Rod Clamp is made of high-strength corrosion-resistant copper alloy. UL listed for direct burial, this ground clamp offers a hex-shaped dead bolt for 4 Stranded/10 Solid wire. Simplified, compact design makes lasting, trouble-free connection.
- Rod size 1/2 and 5/8
- Wire range 10 sol. - 2 str
- Copper
- UL E3060
The 3/8 in. Conduit Connectors (5-Pack) connect and effectively bond armored cable (Ac) to a steel outlet box or other metal enclosure. They are made of galvanized steel and are designed to ensure ground continuity. This connector meets UL and CSA requirements.
- Connect and secure AC to a steel enclosure
- Made of high-strength galvanized steel
- For indoor use only
- UL and CSA Listed
- Reversible locknut cuts through protective coatings to ensure ground continuity
- Locknut is reversible and it is designed to cut through protective coatings on boxes and enclosures to assure ground continuity
- Corrosion resistant
Used in dry locations to connect nonmetallic sheathed cable to a box or enclosure. May be used with a variety of cable types. Meets both US and Canadian compliances.
- Rugged metallic construction will last the lifetime of the installation
- Used with nonmetallic cable
- UL Listed
- CSA
The 1/2 in. Flex Squeeze Connector (3-Pack) connects and effectively bonds flexible metal conduit and armored cable to steel outlet boxes, load centers and other metal enclosures. The reversible locknut cuts through protective coating on boxes and enclosures to assure ground continuity. This connector meets UL and CSA requirements.
- Connects and effectively bonds flexible metal conduit and armored cable to metal enclosures
- Zinc alloy body and locknut are high strength and non-corrosive
- Zinc plated steel screw is non-corrosive
- Fits a standard 1/2 in. knockout
- Tri drive head is compatible with Phillips, slotted and square screwdrivers
- Designed for indoor use only
- UL and CSA listed for safety and peace of mind
- Thread retention feature prevents screw from vibrating loose
- Reversible locknuts cuts through protective coating on boxes for ground continuity
Install the 2 in. Non-Metallic Sheathed Cable Clamp Connectors when joining non-metallic sheathed cables and flexible cords to steel outlet boxes or other metal enclosures. A reversible locknut breaches the protective coating on the box or enclosure to maintain ground continuity. This connector meets UL and CSA a requirements.
- Connects non-metallic sheathed cables and flexible cords to steel outlet boxes or other metal enclosures
- Body and locknut die-cast of high-strength zinc alloy
- Clamp and screws made of zinc-plated steel
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- UL and CSA safety listings
- Indoor use only
- Screws work with Phillips, slotted and square screwdrivers
- Resists corrosion
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- Listed for use in exposed and outdoor usage
The 3/4 in. Knock-Out Seals (4-Pack) are used to cover exposed knock-out holes in steel boxes and other metal enclosures. Suitable for indoor and outdoor use. The seals are made with zinc-plated steel for strength.
- Covers exposed knock-out holes
- Corrosion-resistant zinc-plated steel construction
- For use in steel boxes and other metal enclosures
- Suitable for indoor and outdoor applications
To connect threaded rigid or intermediate metal conduit (IMC) to holes in metal boxes or enclosures, use the 1/2 in. Chase Conduit Nipples (2-Pack). The nipples can also be used along with locknuts to create short raceways between boxes or enclosures. These Nipples meet UL and CSA requirements.
- Terminate threaded rigid or IMC conduit to punched, cut or drilled holes in metal boxes or enclosures
- Use with locknuts to provide short raceways between boxes or enclosures
- High-strength die-cast zinc alloy for corrosion resistance
- UL and CSA safety listings
- For indoor or outdoor applications
Zinc grounding bridge, provides reliable intersystem bonding between power and communication grounding systems. Comes with textured, paintable white cover. Cover is UV rated plastic for long outdoor life.
- Meets 2014 NEC ground requirements
- Has 4 termination points 1 more than required by 250.94 of the 2014 NEC
- Handles multiple hookups of communication systems
- Attaches to conductor with lay in style lug with cable range #6-#2
The 1/2 in. Set Screw Connector is useful for connecting flexible metallic conduit to a steel outlet box or other enclosure. It is die-cast of galvanized steel and suitable for indoor use. This connector meets UL and CSA requirements.
- Connects flexible metallic conduit to electrical enclosures
- Made of high-strength zinc alloy and galvanized steel
- For indoor use only
- UL and CSA Listed
With the 1-1/4 in. Twin-Screw Clamp Connector, you can adjoin non-metallic sheathed cable or flexible cord to a metal enclosure such as a steel outlet box. The screws feature a Tri Drive design for Phillips, slotted and square screwdriver compatibility.
- Secures non-metallic sheathed cable and flexible cord to a metal enclosure such as a steel outlet box
- High-strength, corrosion-resistant zinc alloy body and locknut
- Galvanized steel clamp and screws
- UL and CSA listings
- Reversible locknut designed to cut through protective coatings on boxes and enclosures to ensure ground continuity
- Tri drive screw head design will work with Phillips, slotted and square screwdrivers
- For indoor use
Southwire ground clamps are used to connect copper ground wire to a water pipe, copper tubing or ground rods. This ground clamp has zinc construction. The product is suitable for both indoor and outdoor applications.
- cULus Listed
- Wire range: # 10 SOL/STR - # 2 STR
- 1/2 in. - 1 in. clamp size
- 1-pack
When greater load bearing is required, use these 3/4 in. EMT 2-Hole Straps (4-Pack) to secure lengths of EMT conduit to surfaces such as wood or masonry work. Corrosion resistant. This two-hole strap meets UL and CSA requirements.
- Secures EMT conduit to surfaces such as wood or masonry
- Corrosion-resistant galvanized steel
- UL and CSA Listed
- Strap snaps onto the conduit when installed
3#3 to 3#4/0 1-Hole Service Entrance Cable Straps (4-Pack) are a premier choice for securing service entrance cables. Attach to wood, masonry and more, inside or outdoors. They are corrosion resistant. They are constructed of steel.
- Secures bare solid copper wire to a working surface
- Made of steel
- Fits sizes 3#3 - 3#4/0
- Quick installation
The 1/2 in. EMT Set-Screw Connector has zinc construction and is compatible with EMT conduit. This set-screw connector is male-threaded and is UL and CSA Listed. This fitting is for indoor use.
- Compatible with EMT conduit
- Made of zinc
- For indoor use
- UL and CSA Listed
The 3/4 in. Type LB Threaded Aluminum Conduit Body is designed for gaining access to raceway interiors for wire pulling, splicing and maintenance. The conduit body is made with corrosion-resistant copper-free die-cast aluminum for strength and is suitable for use indoors and outdoors. It is CSA and UL listed to help guarantee safety.
- Designed to gain access to raceway interiors for wire pulling, splicing and maintenance
- For use with IMC and rigid conduit
- For indoor and outdoor applications
- Corrosion-resistant copper-free die-cast aluminum construction
- CSA and UL Listed for safety
For securing EMT and rigid conduit to overhead supports, use these 3/4 in. Steel Conduit and Pipe Hangers (5-Pack). They feature speed thread with a square neck for easy assembly. For indoor and outdoor applications.
- Designed to secure and suspend EMT and rigid conduit from overhead supports
- Corrosion-resistant, zinc-plated steel construction
- Bolt contains square neck for easy assembly
- UL and CSA Listed
Use the 2 in. Non-Metallic Male Terminal Adapter to adapt Sch. 40 and Sch. 80 rigid non-metallic conduit to threaded fittings and metallic systems. Non-metallic PVC resists corrosion, rust, impact and damage due to exposure to sunlight. The socket end attaches to a socket fitting using solvent cement.
- Adapts non-metallic conduit to threaded fittings and metallic systems
- Non-metallic PVC is heat, fire and corrosion resistant
- Designed for use with Sch. 40 and Sch. 80 non-metallic rigid conduit
- UL and CSA listed for safety and peace of mind
- Socket fitting attaches using solvent cement
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
Connect copper ground wire to a water pipe, copper tubing or ground rods with the Blackburn 1/2 in. - 1 in. Bronze Lay-In Ground Clamp. This ground clamp is compatible with direct burial applications and 10 - 2 wire sizes. Constructed from bronze alloy and high performance stainless steel bolts.
- Pipe size 1/2 in. - 1 in.
- Wire range 10 2
- Ground rod range 1/4 in. - 1 in.
- Bronze in color
- UL E3060