Conduit, Fittings & Raceways
Southwire ground clamps are used to connect copper ground wire to a water pipe, copper tubing or ground rods. Product is suitable for direct burial. Suitable for use with # 10 STR - # 2 STR Wire.
- cULus listed
- Wire range: # 10 STR - # 2 STR
- 1/2 in. - 1 in. clamp size
- 1-pack
Cable protector protects NMSC or raceway wires running through wood studs from accidental nail, screw or drill penetration. No fasteners needed with the cable protector. The dimension of protector is 2-9/16 in. long x 1-1/2 in. wide.
- 1/2 in. integral spikes used to mount to wood stud
- Made of pre-galvanized 0.0625 in. thick steel
- No additional hardware required
- Position protector and hammer down spurs
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
Bond flexible metal conduit (FMC) to a steel outlet box or other metal enclosure with this 3/8 in. 90 degree Flex Connector. The Tri Drive screws are compatible with Phillips, slotted and square screwdrivers. This connector meets UL and CSA requirements.
- Connects and bonds FMC and armored cable to metal enclosures
- Body and locknut made of high-strength, corrosion-resistant zinc alloy
- Screw and clamp made of galvanized steel
- Fits in a standard 1/2 in. knockout
- Tri-drive screw head is compatible with Phillips, slotted and square screwdrivers
- UL and CSA Listed
- Reversible locknut designed to cut through protective coatings on boxes and enclosures to ensure ground continuity
- For indoor use only
3/4 in. PVC non-metallic fitting can be used with sch. 40 and sch. 80 rigid non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are non-conductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Can be used to join Rigid Non-Metallic Conduit (RNC)
- Compatible with schedule 40 and schedule 80 RIGID non-metallic conduit (RNC)
- For use in aboveground and underground applications as well as exposed outdoor usage
- Durable PVC construction means no rusting or corroding
- Weighing less than metallic systems means more efficient and quicker installation time
- UL listed
The Blackburn 1/2 in. Ground Rod Clamp offers a hex-shaped dead bolt compatible with 2 Stranded/10 Solid wire. This ground rod clamp is cast from high-strength, corrosion-resistant copper alloy. Simplified, compact design makes lasting, trouble-free connection.
- Rod diameter 1/2 in.
- Wire range 10 sol - 2 str
- Copper
- UL E3060
PVC non-metallic fittings can be used with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. Fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are nonconductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Use with schedule 40 and 80 conduit
- UL E23018
- Material PVC
- Color gray
The Blackburn 1/2 in. - 1 in. Type-J Bronze Ground Clamp connects a ground conductor to a water pipe or copper tube. This ground clamp offers corrosion-resistant screws and a highly conductive copper alloy construction. Cast Bronze Ground Clamp for Wire Range 10 - 2.
- Similar to aluminum water pipe clamp, but lighter in construction
- Ground pipe clamp
- Grounding devices or assemblies
- 1/2 in. - 1 in. tier
The 3/4 in. ENT Snap-on Male Adapter snaps onto electrical non-metallic tubing (ENT) and into a knockout box. Designed for use to connect electrical non-metallic tubing (ENT) and ENT quick set cement, the adapters are suitable for damp locations. The 1-piece quick connect design make installation of this adapter quick, easy and safe.
- 3/4 in. ENT male adapter for connecting Electrical Non-Metallic Tubing (ENT)
- Adapter is compatible with ENT when used with ENT cement
- Durable PVC construction is non-corrosive, non-conductive and suitable for damp locations
- Snap-in adapters on both ends for quick and easy installation
- UL listed
- Suitable for damp locations
Arlington's 1/2 in. Non-Metallic Liquid-Tight Push-On Connector is constructed of UV-rated plastic for a long-lasting, outdoor life. The connector is compatible with non-metallic, liquid-tight, type B conduit. It has push-on installation.
- Use with non-metallic, type B conduit
- UV-rated plastic construction
- Indoor or outdoor use
- NEMA FB-1 and CSA- and UL Listed
- Liquid-tight connection
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
Turn to the 3/8 in. Twin Screw Non-Metallic Cable Clamp Connectors (5-Pack) to join non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures. A reversible locknut cuts through protective coatings on boxes and enclosures to preserve grounding. This connector meets UL and CSA requirements.
- Connect non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures
- Body and locknut are die-cast of high-strength zinc alloy
- Zinc-plated steel clamp and screws
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- Fits 1/2 in. knockout
- For indoor use only
- Screws compatible with Phillips, slotted and square screwdrivers
- Resists corrosion
- UL and CSA safety listings
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
The 1/2 in. Set Screw Connector is useful for connecting flexible metallic conduit to a steel outlet box or other enclosure. It is die-cast of galvanized steel and suitable for indoor use. This connector meets UL and CSA requirements.
- Connects flexible metallic conduit to electrical enclosures
- Made of high-strength zinc alloy and galvanized steel
- For indoor use only
- UL and CSA Listed
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
The 1/2 in. Non-Metallic Type T Conduit Body is a non-threaded body hub made of PVC. The conduit body has a textured lid and a foam in-place gasket. This fitting is compatible with rigid non-metallic conduit (RNC) and can be used for indoor and outdoor applications.
- For indoor and outdoor use
- Made of non-corrosive, non-conductive PVC
- Compatible with RNC conduit
- Maximum working temperature of 120°F
- UL and CSA listed
The armored Cable 1-Hole Support Straps are designed to support and secure service entrance cables to buildings. Made of flexible metal. Used with AC and MC cables.
- Used to support and secure service entrance cables to building structures
- For use with 14/2, 14/3, 12/2, 12/3, 10/2 AC and MC cables
- 1-hole design
- Durable
3/4 in. PVC non-metallic coupling can be used with Schedule 40 and Schedule 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are non-conductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Can be used to join rigid non-metallic conduit (RNC)
- Compatible with schedule 40 and schedule 80 rigid non-metallic conduit (RNC)
- For use in aboveground and underground applications as well as exposed outdoor usage
- Durable PVC construction means no rusting or corroding
- Weighing less than metallic systems means more efficient and quicker installation time
- UL listed
With the 1-1/4 in. Twin-Screw Clamp Connector, you can adjoin non-metallic sheathed cable or flexible cord to a metal enclosure such as a steel outlet box. The screws feature a Tri Drive design for Phillips, slotted and square screwdriver compatibility.
- Secures non-metallic sheathed cable and flexible cord to a metal enclosure such as a steel outlet box
- High-strength, corrosion-resistant zinc alloy body and locknut
- Galvanized steel clamp and screws
- UL and CSA listings
- Reversible locknut designed to cut through protective coatings on boxes and enclosures to ensure ground continuity
- Tri drive screw head design will work with Phillips, slotted and square screwdrivers
- For indoor use
The Blackburn 1/2 in. and 5/8 in. Ground Rod Clamp is made of high-strength corrosion-resistant copper alloy. UL listed for direct burial, this ground clamp offers a hex-shaped dead bolt for 4 Stranded/10 Solid wire. Simplified, compact design makes lasting, trouble-free connection.
- Rod size 1/2 and 5/8
- Wire range 10 sol. - 2 str
- Copper
- UL E3060
Non-Metallic straight snap2It connector for use with non-metallic liquid tight conduit type B only. They offer the fastest, easiest installation. You'll get a super-secure, liquid-tight seal. Plus, they are removable and reusable.
- 3/4 in. trade size
- Easy to install, pushes on to conduit, no tools
- Connectors are produced from UV rated plastic for long outdoor life
- UL CSA Listed
1/2 in. Electrical Non-Metallic Tubing Snap-On Male Adapter threads into threaded hubs and through knockouts. It is made with PVC, features a Snap-On design at the female end and threads at the male end and is suitable for use in damp locations. The adapter is concrete tight when used with electrical non-metallic tubing (ENT) conduit and ENT Blue Quick-Set Cement.
- 1/2 in. ENT male adapter for connecting Electrical Non-Metallic Tubing (ENT)
- Adapter is compatible with ENT when used with ENT cement
- Durable PVC construction is non-corrosive, non-conductive and suitable for damp locations
- Snap-on female end and threaded male end
- UL listed
The 1/2 in. Type LB Threaded Aluminum Conduit Body is designed to gain access to the interior of a raceway for wire pulling, maintenance and splicing. It can be used with rigid and IMC conduit and is made with corrosion-resistant, copper-free die-cast aluminum. The conduit body is UL and CSA listed for safety.
- Designed to gain access to raceway interiors for wire pulling, splicing, and maintenance
- For use with rigid and IMC conduit
- For indoor and outdoor applications
- Corrosion-resistant, copper-free die-cast aluminum
- UL and CSA Listed to help ensure safety
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90° Celsius conductors
- Made in USA
The 1 in. Twin-Screw Clamp Connector is designed to connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure. Corrosion resistant. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Connects non-metallic sheathed cable and flexible cord to metal enclosures
- Made of corrosion-resistant zinc alloy and galvanized steel
- Tri-drive screw-head design works with any screwdriver
- Reversible locknut is designed to cut through protective coatings and form a grounded connection
- UL and CSA Listed
Southwire's Non-Metallic Liquid Tight Connectors are made to use with Type B Non-Metallic Liquid Tight Conduit. There is no threading of conduit or tubing required. Southwire's connectors give a superior liquid tight seal and pull out strength. Comes in a 20-piece carton.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Utilize the Blackburn 1/2 in. - 1 in. Cast Bronze Burial Ground Clamp to connect copper ground wire to a water pipe, copper tubing or ground rods. This ground clamp offers a 10 - 2 wire range. High-strength, high conductivity copper alloys.
- Water pipe size 1/2 - 1
- Wire range 10 - 2
- Bronze
- UL E3060
This is a 1/2 in. Bushings (10-Pack). These are snap-in bushings made of durable PVC plastic. They are designed for knockouts of 1/2 in. trade size.
- Easy-to-use snap-in design
- Black PVC plastic construction
- For indoor use
- UL and CSA safety listed
The 2 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. They provide a grounded connection and are suitable for indoor applications. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secure rigid and IMC conduit or threaded fittings to metal electrical enclosures
- Made of galvanized steel
- Exceed UL 514B requirements
- Cut through protective coatings on boxes to assure ground continuity
The 2 in. Non-Metallic Standard Coupling is crafted with PVC for durability. Suitable for indoor and outdoor use. Should be used with solvent cement. Using fittings with Non-metallic conduit insures system integrity.
- Designed to join non-metallic conduit
- PVC construction
- Works with schedule 40 and schedule 80 conduit
- CSA and UL listed for safety
- Should be attached using solvent cement
Southwire ground rod clamps are used for connecting conductors to ground rods or rebar. This copper alloy clamp is suitable for direct burial. This clamp is specified for use with #10 SOL/STR - #2 STR Wire.
- cULus Listed
- Wire range: # 10 SOL/STR - # 2 STR
- Fits 5/8 in. grounding rod or 1/2 in. rebar
- Suitable for direct burial
- 1-pack
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
Use the 1 in. Rigid or IMC Conduit 1-Hole Strap when extra load bearing is needed to attach conduit to wood, masonry or a like surface. This zinc-plated strap snaps in place. Positively snaps onto the conduit.
- Secures rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL Listed
- For indoor or outdoor applications
The 3/8 in. Flexible Duplex Connectors (2-Pack) are designed to connect and bond 2 pieces of flexible metal conduit, AC, MC or NM cable to a steel outlet box or other metal enclosure when only 1 knockout is in use. These connectors include Tri-drive headed, zinc-plated steel screws. This Duplex Connector meets UL and CSA requirements.
- Connects and bonds 2 pieces of conduit
- Made of corrosion-resistant die-cast zinc alloy
- Fits in a standard 1/2 in. knockout
- For indoor use
- Included screws compatible with Phillips, slotted and square screwdrivers
- UL and CSA Listed
Install the 2 in. Non-Metallic Sheathed Cable Clamp Connectors when joining non-metallic sheathed cables and flexible cords to steel outlet boxes or other metal enclosures. A reversible locknut breaches the protective coating on the box or enclosure to maintain ground continuity. This connector meets UL and CSA a requirements.
- Connects non-metallic sheathed cables and flexible cords to steel outlet boxes or other metal enclosures
- Body and locknut die-cast of high-strength zinc alloy
- Clamp and screws made of zinc-plated steel
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- UL and CSA safety listings
- Indoor use only
- Screws work with Phillips, slotted and square screwdrivers
- Resists corrosion
Zinc grounding bridge, provides reliable intersystem bonding between power and communication grounding systems. Comes with textured, paintable white cover. Cover is UV rated plastic for long outdoor life.
- Meets 2014 NEC ground requirements
- Has 4 termination points 1 more than required by 250.94 of the 2014 NEC
- Handles multiple hookups of communication systems
- Attaches to conductor with lay in style lug with cable range #6-#2
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
Use the 2 in. Non-Metallic Male Terminal Adapter to adapt Sch. 40 and Sch. 80 rigid non-metallic conduit to threaded fittings and metallic systems. Non-metallic PVC resists corrosion, rust, impact and damage due to exposure to sunlight. The socket end attaches to a socket fitting using solvent cement.
- Adapts non-metallic conduit to threaded fittings and metallic systems
- Non-metallic PVC is heat, fire and corrosion resistant
- Designed for use with Sch. 40 and Sch. 80 non-metallic rigid conduit
- UL and CSA listed for safety and peace of mind
- Socket fitting attaches using solvent cement
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
The 3/4 in. Access Pull Elbow enables the pulling of wires through a wall to be directed in 2 separate directions. This pull elbow is compatible with rigid non-metallic conduit. Access pull point for cable in tight radius.
- Can pull wiring in two different directions quickly and easily
- Allows for conduit changes in direction
- Durable PVC construction will not rust or corrode
- Adapter is threaded
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
These galvanized 1/2 in. EMT Compression Connectors (5-Pack) connect EMT conduit to steel outlet boxes, load centers and other metal enclosures. Not for use in underground applications. These connectors meet UL and CSA requirements.
- Connects EMT conduit to metal enclosures such as load centers and steel outlet boxes
- Made of galvanized steel
- UL and CSA Listed
- Concrete tight when taped
Southwire ground clamps are used to connect copper ground wire to a water pipe, copper tubing or ground rods. This ground clamp has zinc construction. The product is suitable for both indoor and outdoor applications.
- cULus Listed
- Wire range: # 10 SOL/STR - # 2 STR
- 1/2 in. - 1 in. clamp size
- 1-pack
The 1/2 in. 90 degree Connector connects and effectively bonds flexible metal conduit (FMC), Mc and Ac to a steel outlet box or other metal enclosure in a right-angled connection. It is made of galvanized steel and designed to ensure ground continuity. This connector meets UL and CSA requirements.
- Secures FMC, Ac and Mc to metal enclosures at a right angle
- Made of corrosion-resistant galvanized steel
- UL and CSA Listed
- Reversible locknut cuts through protective coatings to create a grounded installation
- Screw's tri-drive head design will work with Philips, slotted and square screwdrivers
- Locknut is reversible and it is designed to cut through protective coatings on boxes and enclosures to assure ground continuity
- Corrosion resistant
1-1/2 in. x 10 ft. Electric Metallic Tube Conduit offers protection from magnetic fields, impact damage and crushing when pulling electrical cable. This steel conduit resists flattening, kinking and splitting and is coated with zinc for corrosion and abrasion resistance. Allied conduit has an E-Z pull interior coating provides a smooth surface for faster wire pulling.
- Protects insulated electrical conductors and cables from magnetic fields, impact damage and crushing
- E-Z pull interior coating provides a smooth surface for faster wire pulling
- Excellent mechanical protection for conductors
- Ductility for faster and easier bending
- High grade mild strip steel for durability and longer life
- Listed to underwriter's laboratories safety standard UL 797
- Manufactured in accordance with ANSI C80.3
The 1 in. x 3/4 in. Reducing Bushing is die cast of durable zinc alloy and suitable for indoor use only. The bushing is designed to reduce the entry size of a run of threaded rigid conduit or intermediate metal conduit (IMC). UL and CSA listed for safety and peace of mind.
- Reduces the run entry size of threaded rigid conduit and IMC
- Zinc alloy is high strength and non-corrosive
- Compatible with rigid conduit and IMC
- Designed for indoor use only
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Rely on 1 in. EMT 1-Hole Straps (4-Pack) for assurance that EMT conduit is safely installed. These zinc-plated straps snap on and help with load bearing. Positively snaps onto the conduit.
- Secures EMT conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- For indoor or outdoor applications
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- Listed for use in exposed and outdoor usage