Conduit, Fittings & Raceways
Cable protector protects NMSC or raceway wires running through wood studs from accidental nail, screw or drill penetration. No fasteners needed with the cable protector. The dimension of protector is 2-9/16 in. long x 1-1/2 in. wide.
- 1/2 in. integral spikes used to mount to wood stud
- Made of pre-galvanized 0.0625 in. thick steel
- No additional hardware required
- Position protector and hammer down spurs
Bond flexible metal conduit (FMC) to a steel outlet box or other metal enclosure with this 3/8 in. 90 degree Flex Connector. The Tri Drive screws are compatible with Phillips, slotted and square screwdrivers. This connector meets UL and CSA requirements.
- Connects and bonds FMC and armored cable to metal enclosures
- Body and locknut made of high-strength, corrosion-resistant zinc alloy
- Screw and clamp made of galvanized steel
- Fits in a standard 1/2 in. knockout
- Tri-drive screw head is compatible with Phillips, slotted and square screwdrivers
- UL and CSA Listed
- Reversible locknut designed to cut through protective coatings on boxes and enclosures to ensure ground continuity
- For indoor use only
This 1/2 in. x 10 ft. Electric Metallic Tube Conduit protects your cables from magnetic fields, impact damage and crushing. The heavy-duty steel conduit resists splitting, kinking and flattening and is coated with zinc for corrosion resistance. Allied conduit has an E-Z pull interior coating provides a smooth surface for faster wire pulling.
- Protects insulated electrical conductors and cables from magnetic fields, impact damage and crushing
- E-Z pull interior coating provides a smooth surface for faster wire pulling
- Excellent mechanical protection for conductors
- Ductility for faster and easier bending
- High grade mild strip steel for durability and longer life
- Listed to underwriter's laboratories safety standard UL 797
- Manufactured in accordance with ANSI C80.3
Southwire ground clamps are used to connect copper ground wire to a water pipe, copper tubing or ground rods. Product is suitable for direct burial. Suitable for use with # 10 STR - # 2 STR Wire.
- cULus listed
- Wire range: # 10 STR - # 2 STR
- 1/2 in. - 1 in. clamp size
- 1-pack
Arlington's 1/2 in. Non-Metallic Liquid-Tight Push-On Connector is constructed of UV-rated plastic for a long-lasting, outdoor life. The connector is compatible with non-metallic, liquid-tight, type B conduit. It has push-on installation.
- Use with non-metallic, type B conduit
- UV-rated plastic construction
- Indoor or outdoor use
- NEMA FB-1 and CSA- and UL Listed
- Liquid-tight connection
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
Turn to the 3/8 in. Twin Screw Non-Metallic Cable Clamp Connectors (5-Pack) to join non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures. A reversible locknut cuts through protective coatings on boxes and enclosures to preserve grounding. This connector meets UL and CSA requirements.
- Connect non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures
- Body and locknut are die-cast of high-strength zinc alloy
- Zinc-plated steel clamp and screws
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- Fits 1/2 in. knockout
- For indoor use only
- Screws compatible with Phillips, slotted and square screwdrivers
- Resists corrosion
- UL and CSA safety listings
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
The 3/4 in. Type LB Threaded Aluminum Conduit Body is designed for gaining access to raceway interiors for wire pulling, splicing and maintenance. The conduit body is made with corrosion-resistant copper-free die-cast aluminum for strength and is suitable for use indoors and outdoors. It is CSA and UL listed to help guarantee safety.
- Designed to gain access to raceway interiors for wire pulling, splicing and maintenance
- For use with IMC and rigid conduit
- For indoor and outdoor applications
- Corrosion-resistant copper-free die-cast aluminum construction
- CSA and UL Listed for safety
This 3/4 in. x 10 ft. Electric Metallic Tube Conduit protects your cables from magnetic fields, impact damage and crushing. The heavy-duty steel conduit resists splitting, kinking and flattening and is coated with zinc for corrosion resistance. Allied conduit has an E-Z pull interior coating provides a smooth surface for faster wire pulling.
- Protects insulated electrical conductors and cables from magnetic fields, impact damage and crushing
- E-Z pull interior coating provides a smooth surface for faster wire pulling
- Excellent mechanical protection for conductors
- Ductility for faster and easier bending
- High grade mild strip steel for durability and longer life
- Listed to underwriter's laboratories safety standard UL 797
- Manufactured in accordance with ANSI C80.3
Use the 3/4 in. Conduit Locknuts (4-Pack) to secure RIGID and IMC conduit and various threaded fittings to steel outlet boxes and other metal enclosures. Zinc plated for corrosion resistance. These conduit locknuts can be used for outdoor applications.
- Indoor and outdoor use
- Zinc-plated steel for corrosion resistance
- Exceeds UL 514B safety requirements
- Designed to cut through protective coatings on boxes and enclosures to assure ground continuity
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
3/4 in. PVC non-metallic fitting can be used with sch. 40 and sch. 80 rigid non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are non-conductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Can be used to join Rigid Non-Metallic Conduit (RNC)
- Compatible with schedule 40 and schedule 80 RIGID non-metallic conduit (RNC)
- For use in aboveground and underground applications as well as exposed outdoor usage
- Durable PVC construction means no rusting or corroding
- Weighing less than metallic systems means more efficient and quicker installation time
- UL listed
Rely on 1 in. EMT 1-Hole Straps (4-Pack) for assurance that EMT conduit is safely installed. These zinc-plated straps snap on and help with load bearing. Positively snaps onto the conduit.
- Secures EMT conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- For indoor or outdoor applications
Southwire's Non-Metallic Liquid Tight Connectors are made to use with Type B Non-Metallic Liquid Tight Conduit. There is no threading of conduit or tubing required. Southwire's connectors give a superior liquid tight seal and pull out strength. Comes in a 20-piece carton.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Southwire ground rod clamps are used for connecting conductors to ground rods or rebar. This copper alloy clamp is suitable for direct burial. This clamp is specified for use with #10 SOL/STR - #2 STR Wire.
- cULus Listed
- Wire range: # 10 SOL/STR - # 2 STR
- Fits 5/8 in. grounding rod or 1/2 in. rebar
- Suitable for direct burial
- 1-pack
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
The Electrical Box Extender lends support to the contents of a wall box. This non-conductive extender helps prevent arcing by forming a barrier between the box and the metal screws on the device. This box extender has a 2-hour fire rating.
- Levels and supports wiring devices in an electrical box
- Helps prevent arcing by forming a barrier between a metal box and metal side screws on the device
- Heavy-duty, non-conductive plastic construction
- UL and CSA safety listings
- Complies with 2008 NEC Article 314.20
The #2 Conduit and Pipe Hangers are designed to secure and suspend 1 in. Rigid or EMT conduits to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.
- Secure and suspend 1 in. rigid and EMT conduits from overhead supports
- Zinc-plated steel resists corrosion
- Compatible with #2 conduit
- UL and CSA safety listings
- For indoor or outdoor applications
- Bolt has a square neck for easy assembly
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90° Celsius conductors
- Made in USA
PVC non-metallic fittings can be used with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. Fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are nonconductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Use with schedule 40 and 80 conduit
- UL E23018
- Material PVC
- Color gray
This 1/2 in. Nylon Connector ensures a liquid- and oil-tight seal thanks to a sealing ring and internal grommet with gripping fingers. This connector is also low-profile and non-metallic. It supports a 0.200 to 0.472 cord range.
- Internal grommet with gripping fingers ensures a liquid- and oil-tight seal
- Sealing ring for a liquid-tight seal when installing non-threaded openings
- Great pullout resistance from simply tightening the nut
- UL and CSA Listed
- Made of nylon
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
3/4 in. PVC non-metallic coupling can be used with Schedule 40 and Schedule 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are non-conductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Can be used to join rigid non-metallic conduit (RNC)
- Compatible with schedule 40 and schedule 80 rigid non-metallic conduit (RNC)
- For use in aboveground and underground applications as well as exposed outdoor usage
- Durable PVC construction means no rusting or corroding
- Weighing less than metallic systems means more efficient and quicker installation time
- UL listed
The 3/4 in. Threadless Compression Conduit Connectors (2-Pack) are designed to connect and effectively bond rigid conduit and intermediate metal conduit (IMC) to metal enclosures. Made of zinc-plated steel. These connectors meet UL and CSA requirements.
- Connects and positively bonds conduit to a steel outlet box or other metal enclosure
- Zinc-plated steel construction resists corrosion
- Compatible with rigid conduit and intermediate metal conduit (IMC)
- UL and CSA listed for safety
- Designed for indoor use and in concrete tight applications
Southwire ground clamps are used to connect copper ground wire to a water pipe, copper tubing or ground rods. This ground clamp has zinc construction. The product is suitable for both indoor and outdoor applications.
- cULus Listed
- Wire range: # 10 SOL/STR - # 2 STR
- 1/2 in. - 1 in. clamp size
- 1-pack
Snap-2-It 3/8 in. Connectors (50-Pack) are fast and easy to use. Simply push the cable into the fitting and rotate it until it is tight. To remove the cable, simply turn it counterclockwise. It installs into a 1/2 in. knockout.
- Connects metallic cable quickly and easily
- Die-cast zinc construction
- Can be used with MC/HCF steel and aluminum cable, AC/HCF steel and aluminum cable, flexible steel and aluminum conduit and MC continuous corrugated aluminum cable
- UL- and CSA safety listed
- Concrete tight when taped
- 1/2 in. KO size
Install the 2 in. Non-Metallic Sheathed Cable Clamp Connectors when joining non-metallic sheathed cables and flexible cords to steel outlet boxes or other metal enclosures. A reversible locknut breaches the protective coating on the box or enclosure to maintain ground continuity. This connector meets UL and CSA a requirements.
- Connects non-metallic sheathed cables and flexible cords to steel outlet boxes or other metal enclosures
- Body and locknut die-cast of high-strength zinc alloy
- Clamp and screws made of zinc-plated steel
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- UL and CSA safety listings
- Indoor use only
- Screws work with Phillips, slotted and square screwdrivers
- Resists corrosion
The 1/2 in. 90 degree Connector connects and effectively bonds flexible metal conduit (FMC), Mc and Ac to a steel outlet box or other metal enclosure in a right-angled connection. It is made of galvanized steel and designed to ensure ground continuity. This connector meets UL and CSA requirements.
- Secures FMC, Ac and Mc to metal enclosures at a right angle
- Made of corrosion-resistant galvanized steel
- UL and CSA Listed
- Reversible locknut cuts through protective coatings to create a grounded installation
- Screw's tri-drive head design will work with Philips, slotted and square screwdrivers
- Locknut is reversible and it is designed to cut through protective coatings on boxes and enclosures to assure ground continuity
- Corrosion resistant
The Arlington Industries Snap-Tite 3/8 in. Duplex Saddlegrip Connector is a versatile high-quality electrical fitting that is suitable for indoor use. This connector is designed for use with aluminum and steel, AC and MC flex cables. Die-cast zinc construction provides durability, while the insulated throat offers additional safety. It installs into a 1/2 in. knockout.
- Ideal for firm, reliable connections
- Die-cast zinc provides durability
- Designed for use with aluminum and steel, AC and MC flex cables
- Insulated throat for added safety
- Snap-tite connector enables quick and easy installation
The Blackburn 1/2 in. - 1 in. Type-J Bronze Ground Clamp connects a ground conductor to a water pipe or copper tube. This ground clamp offers corrosion-resistant screws and a highly conductive copper alloy construction. Cast Bronze Ground Clamp for Wire Range 10 - 2.
- Similar to aluminum water pipe clamp, but lighter in construction
- Ground pipe clamp
- Grounding devices or assemblies
- 1/2 in. - 1 in. tier
With the 1-1/4 in. Twin-Screw Clamp Connector, you can adjoin non-metallic sheathed cable or flexible cord to a metal enclosure such as a steel outlet box. The screws feature a Tri Drive design for Phillips, slotted and square screwdriver compatibility.
- Secures non-metallic sheathed cable and flexible cord to a metal enclosure such as a steel outlet box
- High-strength, corrosion-resistant zinc alloy body and locknut
- Galvanized steel clamp and screws
- UL and CSA listings
- Reversible locknut designed to cut through protective coatings on boxes and enclosures to ensure ground continuity
- Tri drive screw head design will work with Phillips, slotted and square screwdrivers
- For indoor use
Save time and money with SNAP2IT fittings. They offer the fastest, easiest installation on liquid-tight conduit. NMLT905-1 is a 1/2 in. liquid tight 90° connector.
- Put your tools away, to install the NMLT905-1 simply push on to conduit, that's it
- You'll get a super-secure, liquid-tight seal, plus the NMLT905-1 is removable and reusable
- NMLT905-1 is UL and CSA Listed
- NMLT905-1 is for non-metallic liquid-tight conduit (type B)
To connect threaded rigid or intermediate metal conduit (IMC) to holes in metal boxes or enclosures, use the 1/2 in. Chase Conduit Nipples (2-Pack). The nipples can also be used along with locknuts to create short raceways between boxes or enclosures. These Nipples meet UL and CSA requirements.
- Terminate threaded rigid or IMC conduit to punched, cut or drilled holes in metal boxes or enclosures
- Use with locknuts to provide short raceways between boxes or enclosures
- High-strength die-cast zinc alloy for corrosion resistance
- UL and CSA safety listings
- For indoor or outdoor applications
The 3/4 in. Female Adapter can be used indoors and outdoors, it is made with PVC and is compatible with rigid non-metallic conduit (RNC), the adapter is CSA and UL Listed to help guarantee safety.
- Compatible with RNC
- For indoor and outdoor applications PVC construction
- PVC construction
- CSA and UL Listed for safety
Use the 1 in. Rigid or IMC Conduit 1-Hole Strap when extra load bearing is needed to attach conduit to wood, masonry or a like surface. This zinc-plated strap snaps in place. Positively snaps onto the conduit.
- Secures rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL Listed
- For indoor or outdoor applications
Non-Metallic straight snap2It connector for use with non-metallic liquid tight conduit type B only. They offer the fastest, easiest installation. You'll get a super-secure, liquid-tight seal. Plus, they are removable and reusable.
- 3/4 in. trade size
- Easy to install, pushes on to conduit, no tools
- Connectors are produced from UV rated plastic for long outdoor life
- UL CSA Listed
Add the 1-1/4 in. Service Entrance Cap to conduit that meets an overhead service entrance. This cap is made of aluminum and can be used indoors or outdoors.
- Serves as a connecting point for overhead service entrance wires on top of EMT, rigid or IMC conduit
- Copper-free die-cast aluminum resists corrosion
- UL and CSA Listed
- Clamp-on design
- For indoor or outdoor applications
2 in. x 10 ft. Electric Metallic Tube Conduit offers protection from magnetic fields, impact damage and crushing when pulling electrical cable. This steel conduit resists flattening, kinking and splitting and is coated with zinc for corrosion and abrasion resistance. Allied conduit has an E-Z pull interior coating provides a smooth surface for faster wire pulling. Allied Tube & Conduit EMT is hot galvanized using a patented in-line Flo-Coat process. This process combines zinc, a conversion coating, and a clear organic polymer topcoat to form a triple layer of protection against corrosion and abrasion.
- Protects insulated electrical conductors and cables from magnetic fields, impact damage and crushing
- E-Z pull interior coating provides a smooth surface for faster wire pulling
- Excellent mechanical protection for conductors
- Ductility for faster and easier bending
- High grade mild strip steel for durability and longer life
- Listed to underwriter's laboratories safety standard UL 797
- Manufactured in accordance with ANSI C80.3
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Carlon PVC elbows are for use in a non-metallic PVC conduit run when directional change is necessary. Manufactured from durable PVC, the elbows are ideal for both indoor and outdoor applications. They will not rust or corrode which is especially important in outdoor applications.
- Designed for above and below-ground applications
- Use with schedule 40 rigid non-metallic conduit
- Resists rust and corrosion
- Listed for use in exposed and outdoor usage
The 2 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. They provide a grounded connection and are suitable for indoor applications. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secure rigid and IMC conduit or threaded fittings to metal electrical enclosures
- Made of galvanized steel
- Exceed UL 514B requirements
- Cut through protective coatings on boxes to assure ground continuity
Use the 3/4 in. 1-Hole Conduit Straps (4-Pack) to support EMT conduits when a greater load bearing is required. The conduit straps are made of zinc-plated steel and are corrosion resistant. This strap meets UL and CSA requirements.
- Designed to secure EMT conduit to wood, masonry or a similar surface where a greater load bearing is required
- Indoor or outdoor use
- Made of zinc-plated steel
- UL and CSA Listed
- Snaps on the conduit when installed
- Corrosion resistant
Used in dry locations to connect nonmetallic sheathed cable to a box or enclosure. May be used with a variety of cable types. Meets both US and Canadian compliances.
- Rugged metallic construction will last the lifetime of the installation
- Used with nonmetallic cable
- UL Listed
- CSA
The 1 in. Non-Metallic Standard Coupling is designed for joining non-metallic conduit. It is made with PVC and is compatible with Schedule 40 and Schedule 80 RIGID non-metallic conduit (RNC). The coupling should be attached using solvent cement and is CSA and UL listed to help ensure safety.
- Designed for joining non-metallic conduit
- Compatible with schedule 40 and schedule 80 RNC
- PVC construction
- Should be attached using solvent cement
- CSA and UL listed for safety
Zinc grounding bridge, provides reliable intersystem bonding between power and communication grounding systems. Comes with textured, paintable white cover. Cover is UV rated plastic for long outdoor life.
- Meets 2014 NEC ground requirements
- Has 4 termination points 1 more than required by 250.94 of the 2014 NEC
- Handles multiple hookups of communication systems
- Attaches to conductor with lay in style lug with cable range #6-#2
The 1-1/4 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. The zinc-plated locknuts are corrosion resistant. They provide a grounded connection.
- Made for connecting rigid and IMC conduit or threaded fittings to steel electrical enclosures
- Cast from corrosion-resistant galvanized steel
- For indoor or outdoor use
- Exceed UL 514B requirements
- Designed to cut through protective coatings on boxes to assure ground continuity
These 3/4 in. x 1/2 in. Conduit Reducing Washers (4-Pack) reduce the size of knockouts in metal enclosures such as steel outlet boxes. They feature raised flanges which enable positive seating in the knockouts. Requires 2 washers per knockout.
- Reduces the size of the knockout in a steel outlet box or other metal enclosure
- Galvanized steel resists corrosion
- Raised flanges allow for positive seating in the knockout
- Trade sizes marked on each washer
- UL listed
- Usable indoors or outdoors