Conduit, Fittings & Raceways
Cable protector protects NMSC or raceway wires running through wood studs from accidental nail, screw or drill penetration. No fasteners needed with the cable protector. The dimension of protector is 2-9/16 in. long x 1-1/2 in. wide.
- 1/2 in. integral spikes used to mount to wood stud
- Made of pre-galvanized 0.0625 in. thick steel
- No additional hardware required
- Position protector and hammer down spurs
The 1 in. x 3/4 in. Reducing Bushing is die cast of durable zinc alloy and suitable for indoor use only. The bushing is designed to reduce the entry size of a run of threaded rigid conduit or intermediate metal conduit (IMC). UL and CSA listed for safety and peace of mind.
- Reduces the run entry size of threaded rigid conduit and IMC
- Zinc alloy is high strength and non-corrosive
- Compatible with rigid conduit and IMC
- Designed for indoor use only
Bond flexible metal conduit (FMC) to a steel outlet box or other metal enclosure with this 3/8 in. 90 degree Flex Connector. The Tri Drive screws are compatible with Phillips, slotted and square screwdrivers. This connector meets UL and CSA requirements.
- Connects and bonds FMC and armored cable to metal enclosures
- Body and locknut made of high-strength, corrosion-resistant zinc alloy
- Screw and clamp made of galvanized steel
- Fits in a standard 1/2 in. knockout
- Tri-drive screw head is compatible with Phillips, slotted and square screwdrivers
- UL and CSA Listed
- Reversible locknut designed to cut through protective coatings on boxes and enclosures to ensure ground continuity
- For indoor use only
Use the 1 in. Rigid or IMC Conduit 1-Hole Strap when extra load bearing is needed to attach conduit to wood, masonry or a like surface. This zinc-plated strap snaps in place. Positively snaps onto the conduit.
- Secures rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL Listed
- For indoor or outdoor applications
1-1/2 in. x 10 ft. Electric Metallic Tube Conduit offers protection from magnetic fields, impact damage and crushing when pulling electrical cable. This steel conduit resists flattening, kinking and splitting and is coated with zinc for corrosion and abrasion resistance. Allied conduit has an E-Z pull interior coating provides a smooth surface for faster wire pulling.
- Protects insulated electrical conductors and cables from magnetic fields, impact damage and crushing
- E-Z pull interior coating provides a smooth surface for faster wire pulling
- Excellent mechanical protection for conductors
- Ductility for faster and easier bending
- High grade mild strip steel for durability and longer life
- Listed to underwriter's laboratories safety standard UL 797
- Manufactured in accordance with ANSI C80.3
Blackburn ground Rod Clamps Type G. Use with Rod Size 3/4 in., Wire Range 10 Sol. - 2 Str. Made of Cast and has high-strength corrosion-resistant copper alloy. UL listed for direct burial. Furnished with hex head bolts. Simplified, compact design makes lasting, trouble-free connection.
- Wire range 10 sol. - 2 Str
- Rod size 3/4 in.
- Copper
- UL E3060
The 3/4 in. x 1/2 in. Reducer Bushing is intended to reduce the entry size of a run of threaded conduit. The bushing is CSA- and UL listed for use with Rigid or intermediate metal conduit (IMC). Used for indoor applications.
- Use to reduce the entry size of a run of threaded conduit
- Die-cast-zinc alloy is high strength
- Corrosion resistant
- Compatible with rigid conduit and IMC
- For indoor use
- CSA- and UL Listed
The 3/4 in. Twin-Screw Clamp Connectors (5-Pack) are designed to connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure. They are ideal for service entrances or other indoor applications. This clamp connector meets UL and CSA requirements.
- Connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure
- Corrosion-resistant zinc diecast construction
- Reversible locknut is designed to cut through protective coatings to assure ground connectivity
- UL and CSA Listed
- Tri-drive screw design works with all screwdrivers
- Locknut is reversible, it is designed to cut through protective coatings on boxes and enclosures to assure ground continuity
- Corrosion resistant
The 1/2 in. 90 degree Connector connects and effectively bonds flexible metal conduit (FMC), Mc and Ac to a steel outlet box or other metal enclosure in a right-angled connection. It is made of galvanized steel and designed to ensure ground continuity. This connector meets UL and CSA requirements.
- Secures FMC, Ac and Mc to metal enclosures at a right angle
- Made of corrosion-resistant galvanized steel
- UL and CSA Listed
- Reversible locknut cuts through protective coatings to create a grounded installation
- Screw's tri-drive head design will work with Philips, slotted and square screwdrivers
- Locknut is reversible and it is designed to cut through protective coatings on boxes and enclosures to assure ground continuity
- Corrosion resistant
Southwire ground clamps are used to connect copper ground wire to a water pipe, copper tubing or ground rods. Product is suitable for direct burial. Suitable for use with # 10 STR - # 2 STR Wire.
- cULus listed
- Wire range: # 10 STR - # 2 STR
- 1/2 in. - 1 in. clamp size
- 1-pack
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
The Blackburn 1/2 in. - 1 in. Type-J Bronze Ground Clamp connects a ground conductor to a water pipe or copper tube. This ground clamp offers corrosion-resistant screws and a highly conductive copper alloy construction. Cast Bronze Ground Clamp for Wire Range 10 - 2.
- Similar to aluminum water pipe clamp, but lighter in construction
- Ground pipe clamp
- Grounding devices or assemblies
- 1/2 in. - 1 in. tier
Arlington's 1/2 in. Non-Metallic Liquid-Tight Push-On Connector is constructed of UV-rated plastic for a long-lasting, outdoor life. The connector is compatible with non-metallic, liquid-tight, type B conduit. It has push-on installation.
- Use with non-metallic, type B conduit
- UV-rated plastic construction
- Indoor or outdoor use
- NEMA FB-1 and CSA- and UL Listed
- Liquid-tight connection
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
Southwire's Non-Metallic Liquid Tight Connectors are made to use with Type B Non-Metallic Liquid Tight Conduit. There is no threading of conduit or tubing required. Southwire's connectors give a superior liquid tight seal and pull out strength. Comes in a 20-piece carton.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
The Electrical Box Extender lends support to the contents of a wall box. This non-conductive extender helps prevent arcing by forming a barrier between the box and the metal screws on the device. This box extender has a 2-hour fire rating.
- Levels and supports wiring devices in an electrical box
- Helps prevent arcing by forming a barrier between a metal box and metal side screws on the device
- Heavy-duty, non-conductive plastic construction
- UL and CSA safety listings
- Complies with 2008 NEC Article 314.20
Arlington's heavy-duty Grounding Bridge provides reliable intersystem bonding between power and communication grounding systems. Our new grounding Bridge has the capacity to handle multiple hookups of communications systems, for instance telephone, CATC or satellite dish. GBB5P-1 is for indoor or outdoor use.
- For good looks - textured, paintable plastic cover
- Accomodates intersystem bonding and grounding conductor(s): #14 - #4 AWG copper or aluminum, solid or stranded
- Grounding bridge, GBB5P-1, has an adapter for use with PVC conduit
- Fast, simple installation
- Easy access for inspections
The 1/2 in. Set Screw Connector is useful for connecting flexible metallic conduit to a steel outlet box or other enclosure. It is die-cast of galvanized steel and suitable for indoor use. This connector meets UL and CSA requirements.
- Connects flexible metallic conduit to electrical enclosures
- Made of high-strength zinc alloy and galvanized steel
- For indoor use only
- UL and CSA Listed
Turn to the 3/8 in. Twin Screw Non-Metallic Cable Clamp Connectors (5-Pack) to join non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures. A reversible locknut cuts through protective coatings on boxes and enclosures to preserve grounding. This connector meets UL and CSA requirements.
- Connect non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures
- Body and locknut are die-cast of high-strength zinc alloy
- Zinc-plated steel clamp and screws
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- Fits 1/2 in. knockout
- For indoor use only
- Screws compatible with Phillips, slotted and square screwdrivers
- Resists corrosion
- UL and CSA safety listings
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
The 1-1/4 in. 1-Hole EMT Straps (4-Pack) secure EMT conduit to wood, masonry or other building surfaces. They are made of galvanized steel. They are ideal for indoor high-load-bearing applications.
- Attach conduit to indoor building surfaces in high-load-bearing applications
- Made of galvanized steel
- Compatible with EMT conduit
- UL listed
- Corrosion resistant
Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features our split-gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.
- Steel and malleable iron construction provides raceway integrity
- Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening
- Locknut provided
- Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Install the 2 in. Non-Metallic Sheathed Cable Clamp Connectors when joining non-metallic sheathed cables and flexible cords to steel outlet boxes or other metal enclosures. A reversible locknut breaches the protective coating on the box or enclosure to maintain ground continuity. This connector meets UL and CSA a requirements.
- Connects non-metallic sheathed cables and flexible cords to steel outlet boxes or other metal enclosures
- Body and locknut die-cast of high-strength zinc alloy
- Clamp and screws made of zinc-plated steel
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- UL and CSA safety listings
- Indoor use only
- Screws work with Phillips, slotted and square screwdrivers
- Resists corrosion
Attach a ground rod in place by using the Blackburn 3/8 in. - 3/4 in. Type-JWR Bronze Ground Rod Clamp. This ground rod clamp accommodates use with 1/2 in. - 3/4 in. rod sizes and 10 solid to 1/0 stranded wire sizes. UL Listed for direct burial in earth/concrete.
- Rod size 3/8 in. - 3/4 in.
- Wire range 10 Sol. - 1/0 Str
- Copper
- UL E3060
The 1/2 in. ENT Snap-on Male Adapter snaps onto electrical non-metallic tubing (ENT) and into a knockout box. Designed for use to connect electrical non-metallic tubing (ENT) and ENT quick set cement, the adapters are suitable for damp locations. The one piece quick connect design make installation of this adapter quick, easy and safe.
- 1/2 in. ENT adapter for connecting Electrical Non-Metallic Tubing (ENT)
- Adapter is compatible with ENT when used with ENT cement
- Durable PVC construction is non-corrosive, non-conductive and suitable for damp locations
- Snap-in adapters on both ends for quick and easy installation
- UL listed
In wet locations, couple two ends of conduit with RACO compression couplings. Designed to comply with current Raintight test requirements (2008 NEC 358.42 and 314.15.) For easy inspection, "Wet Location" is marked on all fittings.
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Marked with "wet location" for easy inspection
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
Arlington's NM940-100 is listed for use with 1 or 2 cables. The Arlington Industries Inc. black Push-in Connector is easy and fast to install. The NM940-10 is a competitively priced Arlington item.
- Arlington's black button holds wires securely and exceeds UL pullout tests
- NM940-100 material is plastic construction
- Item is the lowest cost NM cable connector available today
- NM940-100 is simple to remove with a twist of a screwdriver
The Arlington Industries Snap-Tite 3/8 in. Duplex Saddlegrip Connector is a versatile high-quality electrical fitting that is suitable for indoor use. This connector is designed for use with aluminum and steel, AC and MC flex cables. Die-cast zinc construction provides durability, while the insulated throat offers additional safety. It installs into a 1/2 in. knockout.
- Ideal for firm, reliable connections
- Die-cast zinc provides durability
- Designed for use with aluminum and steel, AC and MC flex cables
- Insulated throat for added safety
- Snap-tite connector enables quick and easy installation
Rely on 1 in. EMT 1-Hole Straps (4-Pack) for assurance that EMT conduit is safely installed. These zinc-plated straps snap on and help with load bearing. Positively snaps onto the conduit.
- Secures EMT conduit to wood, masonry or a similar surface where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL and CSA Listed
- For indoor or outdoor applications
Utilize the Blackburn 1/2 in. - 1 in. Cast Bronze Burial Ground Clamp to connect copper ground wire to a water pipe, copper tubing or ground rods. This ground clamp offers a 10 - 2 wire range. High-strength, high conductivity copper alloys.
- Water pipe size 1/2 - 1
- Wire range 10 - 2
- Bronze
- UL E3060
The Blackburn 1/2 in. Ground Rod Clamp offers a hex-shaped dead bolt compatible with 2 Stranded/10 Solid wire. This ground rod clamp is cast from high-strength, corrosion-resistant copper alloy. Simplified, compact design makes lasting, trouble-free connection.
- Rod diameter 1/2 in.
- Wire range 10 sol - 2 str
- Copper
- UL E3060
The 3/8 in. Flexible Duplex Connectors (2-Pack) are designed to connect and bond 2 pieces of flexible metal conduit, AC, MC or NM cable to a steel outlet box or other metal enclosure when only 1 knockout is in use. These connectors include Tri-drive headed, zinc-plated steel screws. This Duplex Connector meets UL and CSA requirements.
- Connects and bonds 2 pieces of conduit
- Made of corrosion-resistant die-cast zinc alloy
- Fits in a standard 1/2 in. knockout
- For indoor use
- Included screws compatible with Phillips, slotted and square screwdrivers
- UL and CSA Listed
The 3 in. Non-Metallic Terminal Adapter is designed for use with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). It is made with PVC and features male threads on 1 end and a socket head on the other. The adapter is used for adapting non-metallic conduits to threaded fittings and metallic systems.
- Compatible with Sch. 40 and Sch. 80 rigid non-metallic conduit
- 3 in. male terminal adapter
- PVC construction for durable performance
- PVC construction
- Male threads and socket head on opposite ends
- CSA and UL Listed for safety
The #2 Conduit and Pipe Hangers are designed to secure and suspend 1 in. Rigid or EMT conduits to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.
- Secure and suspend 1 in. rigid and EMT conduits from overhead supports
- Zinc-plated steel resists corrosion
- Compatible with #2 conduit
- UL and CSA safety listings
- For indoor or outdoor applications
- Bolt has a square neck for easy assembly
3/4 in. PVC non-metallic coupling can be used with Schedule 40 and Schedule 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are non-conductive assuring a safe system. Resistant to sunlight and Listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Can be used to join rigid non-metallic conduit (RNC)
- Compatible with schedule 40 and schedule 80 rigid non-metallic conduit (RNC)
- For use in aboveground and underground applications as well as exposed outdoor usage
- Durable PVC construction means no rusting or corroding
- Weighing less than metallic systems means more efficient and quicker installation time
- UL listed
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
The 1 in. Twin-Screw Clamp Connector is designed to connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure. Corrosion resistant. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Connects non-metallic sheathed cable and flexible cord to metal enclosures
- Made of corrosion-resistant zinc alloy and galvanized steel
- Tri-drive screw-head design works with any screwdriver
- Reversible locknut is designed to cut through protective coatings and form a grounded connection
- UL and CSA Listed
The 2 in. Conduit Locknuts (2-Pack) are designed to secure rigid and IMC conduit or various threaded fittings to steel outlet boxes or other metal enclosures. They provide a grounded connection and are suitable for indoor applications. Designed to cut through protective coatings on boxes and enclosures to assure ground continuity.
- Secure rigid and IMC conduit or threaded fittings to metal electrical enclosures
- Made of galvanized steel
- Exceed UL 514B requirements
- Cut through protective coatings on boxes to assure ground continuity
The 3/4 in. Electrical Non-Metallic Tubing Threaded Adapter is designed for use with electrical non-metallic tubing. Product is suitable for use in damp locations. The adapter is crafted with PVC for durability and is concrete tight when used with ENT and ENT Blue Quick-Set Cement.
- 3/4 in. ENT male adapter for connecting Electrical Non-Metallic Tubing (ENT)
- Adapter is compatible with ENT when used with ENT cement
- Durable PVC construction is non-corrosive, non-conductive and suitable for damp locations
- Snap-on female end and threaded male end
- UL listed
Protect and route your wiring with durable and versatile conduits from Cantex. This Schedule 40 PVC conduit is ideal for both underground and aboveground applications. Its sturdy construction protects electrical wires from potential damage while allowing easy installation in tight spaces. The 10-foot length provides ample coverage, while the diameter accommodates standard wiring needs. This bell-ended conduit ensures seamless connections, saving time and effort. It's engineered to resist corrosion, rust, and UV sunlight and it's perfect for indoor and outdoor environments. Our electrical conduit conforms to UL651 and NEMA TC-2 standards, guaranteeing reliable performance and safety. Our conduit is ETL-listed and is rated for conductors up to 90 degrees Celsius so you can meet the demands of modern electrical projects. Proudly made in the USA, it combines quality and compliance to suit professional and DIY installations.
- Nonmetallic PVC conduit is corrosion, rust, and sunlight-resistant
- ETL listed indoor or outdoor electrical conduit
- This wire conduit conforms to UL651 and NEMA TC-2 standards
- PVC conduit rated for use with 90-degree Celsius conductors
- Made in USA
The 3/8 in. Saddle Connectors (5-Pack) are designed to connect non-metallic sheathed cable, flexible metal conduit and metal-clad and armored cables to steel electrical enclosures. They are made of zinc alloy and zinc-plated steel and are suitable for indoor use. This Saddle Connector meets UL and CSA requirements.
- Connect a variety of cable types to metal electrical boxes
- Connectors fit a standard 1/2 in. knockout
- Made from corrosion-resistant galvanized steel
- UL and CSA listed
- Screw's tri drive head design will work with Phillips, slotted, and square screwdrivers
- Locknut is reversible, it is designed to cut through protective coatings on boxes and enclosures to assure ground continuity
- Corrosion resistant
Zinc grounding bridge, provides reliable intersystem bonding between power and communication grounding systems. Comes with textured, paintable white cover. Cover is UV rated plastic for long outdoor life.
- Meets 2014 NEC ground requirements
- Has 4 termination points 1 more than required by 250.94 of the 2014 NEC
- Handles multiple hookups of communication systems
- Attaches to conductor with lay in style lug with cable range #6-#2
The 3#3 to 3#2 NM Cable 1-Hole Service Entrance Cable Straps (6-Pack) secure non-metallic cable to surfaces such as wood and masonry. The straps are made from zinc-plated steel for corrosion resistance. It is intended for indoor or outdoor use.
- Designed to secure service entrance cable to wood, masonry or a similar surface
- Made of zinc-plated steel for corrosion resistance
- 1-hole design for easy installation
- For indoor or outdoor use
Bond EMT conduit to a box or enclosure with RACO compression connectors. Provides concrete-tight connections. Offered in either insulated or non-insulated. Suitable for applications above 600V.
- Steel construction ensures mechanical protection
- Zinc-electroplated for added corrosion protection
- Non-insulated
- cULus
- Available in trade sizes of 1/2 in. through 4 in.
Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features split gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.
- Steel and malleable iron construction provides raceway integrity
- Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening
- Locknut provided
- Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations
Southwire ground rod clamps are used for connecting conductors to ground rods or rebar. This copper alloy clamp is suitable for direct burial. This clamp is specified for use with #10 SOL/STR - #2 STR Wire.
- cULus Listed
- Wire range: # 10 SOL/STR - # 2 STR
- Fits 5/8 in. grounding rod or 1/2 in. rebar
- Suitable for direct burial
- 1-pack
Non-Metallic straight snap2It connector for use with non-metallic liquid tight conduit type B only. They offer the fastest, easiest installation. You'll get a super-secure, liquid-tight seal. Plus, they are removable and reusable.
- 3/4 in. trade size
- Easy to install, pushes on to conduit, no tools
- Connectors are produced from UV rated plastic for long outdoor life
- UL CSA Listed
The 1 in. Non-Metallic Standard Coupling is designed for joining non-metallic conduit. It is made with PVC and is compatible with Schedule 40 and Schedule 80 RIGID non-metallic conduit (RNC). The coupling should be attached using solvent cement and is CSA and UL listed to help ensure safety.
- Designed for joining non-metallic conduit
- Compatible with schedule 40 and schedule 80 RNC
- PVC construction
- Should be attached using solvent cement
- CSA and UL listed for safety