Conduit, Fittings & Raceways
Cable protector protects NMSC or raceway wires running through wood studs from accidental nail, screw or drill penetration. No fasteners needed with the cable protector. The dimension of protector is 2-9/16 in. long x 1-1/2 in. wide.
- 1/2 in. integral spikes used to mount to wood stud
- Made of pre-galvanized 0.0625 in. thick steel
- No additional hardware required
- Position protector and hammer down spurs
The 1 in. x 3/4 in. Reducing Bushing is die cast of durable zinc alloy and suitable for indoor use only. The bushing is designed to reduce the entry size of a run of threaded rigid conduit or intermediate metal conduit (IMC). UL and CSA listed for safety and peace of mind.
- Reduces the run entry size of threaded rigid conduit and IMC
- Zinc alloy is high strength and non-corrosive
- Compatible with rigid conduit and IMC
- Designed for indoor use only
Bond flexible metal conduit (FMC) to a steel outlet box or other metal enclosure with this 3/8 in. 90 degree Flex Connector. The Tri Drive screws are compatible with Phillips, slotted and square screwdrivers. This connector meets UL and CSA requirements.
- Connects and bonds FMC and armored cable to metal enclosures
- Body and locknut made of high-strength, corrosion-resistant zinc alloy
- Screw and clamp made of galvanized steel
- Fits in a standard 1/2 in. knockout
- Tri-drive screw head is compatible with Phillips, slotted and square screwdrivers
- UL and CSA Listed
- Reversible locknut designed to cut through protective coatings on boxes and enclosures to ensure ground continuity
- For indoor use only
Use the 1 in. Rigid or IMC Conduit 1-Hole Strap when extra load bearing is needed to attach conduit to wood, masonry or a like surface. This zinc-plated strap snaps in place. Positively snaps onto the conduit.
- Secures rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL Listed
- For indoor or outdoor applications
1-1/2 in. x 10 ft. Electric Metallic Tube Conduit offers protection from magnetic fields, impact damage and crushing when pulling electrical cable. This steel conduit resists flattening, kinking and splitting and is coated with zinc for corrosion and abrasion resistance. Allied conduit has an E-Z pull interior coating provides a smooth surface for faster wire pulling.
- Protects insulated electrical conductors and cables from magnetic fields, impact damage and crushing
- E-Z pull interior coating provides a smooth surface for faster wire pulling
- Excellent mechanical protection for conductors
- Ductility for faster and easier bending
- High grade mild strip steel for durability and longer life
- Listed to underwriter's laboratories safety standard UL 797
- Manufactured in accordance with ANSI C80.3
Blackburn ground Rod Clamps Type G. Use with Rod Size 3/4 in., Wire Range 10 Sol. - 2 Str. Made of Cast and has high-strength corrosion-resistant copper alloy. UL listed for direct burial. Furnished with hex head bolts. Simplified, compact design makes lasting, trouble-free connection.
- Wire range 10 sol. - 2 Str
- Rod size 3/4 in.
- Copper
- UL E3060
The 3/4 in. x 1/2 in. Reducer Bushing is intended to reduce the entry size of a run of threaded conduit. The bushing is CSA- and UL listed for use with Rigid or intermediate metal conduit (IMC). Used for indoor applications.
- Use to reduce the entry size of a run of threaded conduit
- Die-cast-zinc alloy is high strength
- Corrosion resistant
- Compatible with rigid conduit and IMC
- For indoor use
- CSA- and UL Listed
The 3/4 in. Twin-Screw Clamp Connectors (5-Pack) are designed to connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure. They are ideal for service entrances or other indoor applications. This clamp connector meets UL and CSA requirements.
- Connect non-metallic sheathed cable and flexible cord to a steel outlet box or other metal enclosure
- Corrosion-resistant zinc diecast construction
- Reversible locknut is designed to cut through protective coatings to assure ground connectivity
- UL and CSA Listed
- Tri-drive screw design works with all screwdrivers
- Locknut is reversible, it is designed to cut through protective coatings on boxes and enclosures to assure ground continuity
- Corrosion resistant
The 1/2 in. 90 degree Connector connects and effectively bonds flexible metal conduit (FMC), Mc and Ac to a steel outlet box or other metal enclosure in a right-angled connection. It is made of galvanized steel and designed to ensure ground continuity. This connector meets UL and CSA requirements.
- Secures FMC, Ac and Mc to metal enclosures at a right angle
- Made of corrosion-resistant galvanized steel
- UL and CSA Listed
- Reversible locknut cuts through protective coatings to create a grounded installation
- Screw's tri-drive head design will work with Philips, slotted and square screwdrivers
- Locknut is reversible and it is designed to cut through protective coatings on boxes and enclosures to assure ground continuity
- Corrosion resistant
Southwire ground clamps are used to connect copper ground wire to a water pipe, copper tubing or ground rods. Product is suitable for direct burial. Suitable for use with # 10 STR - # 2 STR Wire.
- cULus listed
- Wire range: # 10 STR - # 2 STR
- 1/2 in. - 1 in. clamp size
- 1-pack
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
The Blackburn 1/2 in. - 1 in. Type-J Bronze Ground Clamp connects a ground conductor to a water pipe or copper tube. This ground clamp offers corrosion-resistant screws and a highly conductive copper alloy construction. Cast Bronze Ground Clamp for Wire Range 10 - 2.
- Similar to aluminum water pipe clamp, but lighter in construction
- Ground pipe clamp
- Grounding devices or assemblies
- 1/2 in. - 1 in. tier
Arlington's 1/2 in. Non-Metallic Liquid-Tight Push-On Connector is constructed of UV-rated plastic for a long-lasting, outdoor life. The connector is compatible with non-metallic, liquid-tight, type B conduit. It has push-on installation.
- Use with non-metallic, type B conduit
- UV-rated plastic construction
- Indoor or outdoor use
- NEMA FB-1 and CSA- and UL Listed
- Liquid-tight connection
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
Southwire's Non-Metallic Liquid Tight Connectors are made to use with Type B Non-Metallic Liquid Tight Conduit. There is no threading of conduit or tubing required. Southwire's connectors give a superior liquid tight seal and pull out strength. Comes in a 20-piece carton.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
The Electrical Box Extender lends support to the contents of a wall box. This non-conductive extender helps prevent arcing by forming a barrier between the box and the metal screws on the device. This box extender has a 2-hour fire rating.
- Levels and supports wiring devices in an electrical box
- Helps prevent arcing by forming a barrier between a metal box and metal side screws on the device
- Heavy-duty, non-conductive plastic construction
- UL and CSA safety listings
- Complies with 2008 NEC Article 314.20
Arlington's heavy-duty Grounding Bridge provides reliable intersystem bonding between power and communication grounding systems. Our new grounding Bridge has the capacity to handle multiple hookups of communications systems, for instance telephone, CATC or satellite dish. GBB5P-1 is for indoor or outdoor use.
- For good looks - textured, paintable plastic cover
- Accomodates intersystem bonding and grounding conductor(s): #14 - #4 AWG copper or aluminum, solid or stranded
- Grounding bridge, GBB5P-1, has an adapter for use with PVC conduit
- Fast, simple installation
- Easy access for inspections
The 1/2 in. Set Screw Connector is useful for connecting flexible metallic conduit to a steel outlet box or other enclosure. It is die-cast of galvanized steel and suitable for indoor use. This connector meets UL and CSA requirements.
- Connects flexible metallic conduit to electrical enclosures
- Made of high-strength zinc alloy and galvanized steel
- For indoor use only
- UL and CSA Listed
Turn to the 3/8 in. Twin Screw Non-Metallic Cable Clamp Connectors (5-Pack) to join non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures. A reversible locknut cuts through protective coatings on boxes and enclosures to preserve grounding. This connector meets UL and CSA requirements.
- Connect non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures
- Body and locknut are die-cast of high-strength zinc alloy
- Zinc-plated steel clamp and screws
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- Fits 1/2 in. knockout
- For indoor use only
- Screws compatible with Phillips, slotted and square screwdrivers
- Resists corrosion
- UL and CSA safety listings
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
The 1-1/4 in. 1-Hole EMT Straps (4-Pack) secure EMT conduit to wood, masonry or other building surfaces. They are made of galvanized steel. They are ideal for indoor high-load-bearing applications.
- Attach conduit to indoor building surfaces in high-load-bearing applications
- Made of galvanized steel
- Compatible with EMT conduit
- UL listed
- Corrosion resistant
Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features our split-gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.
- Steel and malleable iron construction provides raceway integrity
- Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening
- Locknut provided
- Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations
Non-metallic liquid tight connectors are made to use with type B Non-metallic liquid tight conduit. There is no threading of conduit or tubing required. Southwire connectors give a superior liquid tight seal and pull out strength.
- Suitable for indoor or outdoor use
- Included steel locknut and seal gasket
- Protects from rain, liquid and oils
- Simple, quick and easy assembly
- For use with flexible liquidtight conduit
Install the 2 in. Non-Metallic Sheathed Cable Clamp Connectors when joining non-metallic sheathed cables and flexible cords to steel outlet boxes or other metal enclosures. A reversible locknut breaches the protective coating on the box or enclosure to maintain ground continuity. This connector meets UL and CSA a requirements.
- Connects non-metallic sheathed cables and flexible cords to steel outlet boxes or other metal enclosures
- Body and locknut die-cast of high-strength zinc alloy
- Clamp and screws made of zinc-plated steel
- Reversible locknut cuts through protective coatings on boxes and enclosures to assure ground continuity
- UL and CSA safety listings
- Indoor use only
- Screws work with Phillips, slotted and square screwdrivers
- Resists corrosion
Attach a ground rod in place by using the Blackburn 3/8 in. - 3/4 in. Type-JWR Bronze Ground Rod Clamp. This ground rod clamp accommodates use with 1/2 in. - 3/4 in. rod sizes and 10 solid to 1/0 stranded wire sizes. UL Listed for direct burial in earth/concrete.
- Rod size 3/8 in. - 3/4 in.
- Wire range 10 Sol. - 1/0 Str
- Copper
- UL E3060