Conduit, Fittings & Raceways
The 1/2 in. Compression Connector is a non-metallic UF Connector, compression type for underground feeder cable. It has a low-profile design to fit the new smaller UF cables as well as standard sizes. The connector is UL listed as well as CSA and has a cable range of 14/2 in. - 12/2 in.
- Compression type for underground feeder cable
- Low profile design to fit the new smaller UF cables as well as standard sizes
- Trade size: 1/2 in.
- Knockout size: 1/3 in.
- Cable range: 14/2 in. - 12/2 in.
- Dimensions: 1.792 in. x 0.630 in. x 1.042 in.
- Secures Pipe To Box Or Panel
- Bulk
- For Rigid Conduit
Screw-On 90 degree non-metallic connector for use with non-metallic liquid tight conduit, type B. The connector is produced from UV rated plastic for long outdoor life. Simply screw the connector onto the conduit until it stops, if the fittings are not in alignment with the knockout, you may unscrew the fitting up to one full turn for adjustment.
- Conduit threads onto ferrule and up inside the outer body, inside taper squeezes down on the outside of conduit for a superior liquid tight seal
- UV rated plastic
- Use with non-metallic liquid tight conduit, type B
- Also for use with flexible non-metallic tubing
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
- Dimensions: 2.110 in. x 0.542 in. x 2.525 in.
Allied Tube & Conduit schedule 40 conduit is used for your electrical wiring needs. PVC Conduit provides non-metallic protection for your cables and conductors that provides good insulation without power loss or conductor heating. Allied Tube & Conduit is PVC Conduit is sunlight, corrosion, and fire resistant.
- Commercial, Industrial and Utility Usage
- Resistant to most chemicals, PVC is typically not affected by corrosive soils or salts.
- Properties of Allied PVC Conduit provide good insulation and no power loss or conductor heating.
- Properties make PVC fire resistant.
Metallic Liquid-Tite Connecter 1/2"
This liquid title connector is a member of the Snap2It Series. For use only with liquid-tight conduit, type B only. The product has easy, push on installation, no tools required.
- Competitively priced
- Fast installation
- Trade size: 3/4 in.
- Knockout size: 3/4 in.
- Dimensions: 2.376 in. x 0.619 in. x 1.420 in.
5/8" Copper
- UL Approved For Direct Burial
- Cast Of High Strength Corrosion Resistant Copper Alloy
- Fits Over 5/8" Ground Rod
- Hex Head Bolt
- Accommodates Wire Sizes From #2 Stranded To #10 Solid
- Use To Cover Exposed Holes In Steel Outlet Boxes and Other Metal Enclosures
- Indoor Use Only
- 10 Per Bag
Arlington's Screw 90 degree non-metallic connector. It is used with non-metallic liquid-tight conduit, type B only. It is produced from UV rated plastic for long outdoor life.
- Conduit threads onto ferrule and up inside the outer body, inside taper squeezes down on the outside of conduit for a superior liquid tight seal
- To install simply screw onto the conduit until it stops
- Fitting is not in alignment with knock-out you may unscrew the fitting up to 1 full turn for adjustment
- Also for use with flexible non-metallic tubing
- Trade size: 3/4 in.
- Knockout size: 3/4 in.
- Dimensions: 2.489 in. x 0.545 in. x 2.872 in.
- Use To Cover Exposed Holes In Steel Outlet Boxes and Other Metal Enclosures
- Indoor Use Only
- 10 Per Bag
For Non-Metallic Cable
- Twin Screw
- For Indoor Use Only
- Use In Dry Location To Connect Non-Metallic Cable To Metal Enclosures
- Die-Cast Zamak Construction
- Concrete Tight
- Size 0 Fits 14/2,14/3,12/2, Ac and Mc
Allied Tube & Conduit schedule 40 conduit is used for your electrical wiring needs. PVC Conduit provides non-metallic protection for your cables and conductors that provides good insulation without power loss or conductor heating. Allied Tube & Conduit is PVC Conduit is sunlight, corrosion, and fire resistant.
Our Black Button Non-Metallic Push-In Connector for NM Cable. The black button may be used for both 1 or 2 cables and installs easily into KO using light finger pressure. It holds the wires securely and meets and exceeds UL pullout tests. The black button removes very easily with a twist of a screwdriver.
- Fast and easy snap in installation of single or multiple cables
- Easy to remove and reuse
- Made of non-conductive plastic
- Trade size: 3/4 in.
- Knockout size: 3/4 in.
Our 1 in. plastic knock-out seal. This item costs less than the steel snap-in blanks and provides a safer installation. A metal blank in a plastic box or enclosure is not grounded and could become a shock hazard.
- Plastic - provides safer installation
- Black
- For knock-outs
- Trade size: 1 in.
- Dimensions: 1.500 in. x .468 in.
- Die-Cast Zamak Construction
- Two-Thread Locknut Won't Skip
- Concrete Tight
- Staked Screws
The 3/8 in. Black Button Plastic Push-in Connectors (25-Pack) are versatile high-quality electrical fittings designed for indoor use. These connectors offer a fast and easy way to install single or multiple cables and require only light finger pressure to snap into 1/2 in. knock outs. The cables insert without a struggle for a smooth installation, to remove simply use a twist of a screwdriver.
- Ideal for firm, dependable connections
- Suitable for use with a wide range of cables
- Use light finger pressure to snap into 1/2 in. knock outs suitable for use with a wide range of cables
- Quick and easy to install quick and easy to install
- Use light finger pressure to snap into 1/2 in. knock outs
- Quick and easy to install
- Zinc Alloy
- 3/8" Greenfield (Flex)
- 14/2,12/3 Bx
For Non-Metallic Cable
- Twin Screw
- For Indoor Use Only
- Use In Dry Location To Connect Non-Metallic Cable To Metal Enclosures
- Use Without Locknut
- Protects Wire
- For Rigid Conduit
It is a thin-wall conduit strap. One-hole Snap-On type. 1-year warranty against defect.
- Steel material
- Thin wall
- 16-Gauge
- 3/4 in. length