An air conditioning disconnect (ACD) is a disconnect located between a loadcenter (distribution panel) and air conditioner. Eaton's ACD product line provides an installer or repair personnel with a visible disconnecting means when performing maintenance. ACDs are also known as disconnects, pullouts or air conditioning switches.The most widely used application for ACDs is for residential and light commercial air conditioning units. An ACD is installed outdoors, in visible proximity to the air conditioner condensing unit. Metallic enclosures are galvanized steel and are installed in various locations. Nonmetallic enclosures are a plastic (polycarbonate) enclosure commonly used in coastal or salt-water areas.

• ON/OFF control provided by a pullout handle
• Pullout handle can be conveniently stored in the compartment in the OFF position, helping to prevent the handle from being misplaced
• Protective shield cannot be removed until the pullout handle is removed, disconnecting the power
• Enclosure is rated NEMA 3R for outdoor use and material is galvanized steel

An air conditioning disconnect (ACD) is a disconnect located between a loadcenter (distribution panel) and air conditioner. Eaton’s ACD product line provides an installer or repair personnel with a visible disconnecting means when performing maintenance. ACDs are also known as disconnects, pullouts or air conditioning switches. The most widely used application for ACDs is for residential and light commercial air conditioning units. An ACD is installed outdoors, in visible proximity to the air conditioner condensing unit. Metallic enclosures are galvanized steel and are installed in various locations. Nonmetallic enclosures are a plastic (polycarbonate) enclosure commonly used in coastal or salt-water areas.

• ON/OFF control provided by a pullout handle
• Pullout handle can be conveniently stored in the compartment in the OFF position, helping to prevent the handle from being misplaced
• Protective shield cannot be removed until the pullout handle is removed, disconnecting the power
• Enclosure is rated NEMA 3R for outdoor use and material is galvanized steel

The Eaton Cutler-Hammer 60 Amp 120/240-Volt 14,400-Watt Fused Air Conditioning Disconnect is ANSI certified and CSA and UL listed. The unit has a metallic enclosure and is rated for outdoor use. The fused disconnect is compatible with class H fuses and is intended to disconnect power from an air-conditioning unit.

• Use to disconnect power from an air-conditioning unit
• NEMA 3R
• Single phase
• ON/OFF control provided by a pullout handle

An Air Conditioning (AC) Disconnect provides an installer or repair personnel with a visible disconnecting means while performing maintenance on an air conditioning unit. The Eaton 30 Amp 120/240-Volt AC Disconnect is ANSI certified and UL listed. The unit is approved for outdoor use and features a metallic enclosure. This safety switch is designed to disconnect power from an air-conditioning unit and is rated for up to 240-Volt.

• Type: fused pullout
• Amperage rating: 30 Amp
• Color: ANSI 61 gray
• Enclosure: NEMA 3R
• Enclosure material: galvanized steel
• Horsepower: 2 HP at 120-Volt, 3 HP at 240-Volt
• Interrupt rating: 10 kAIC
• Wire size: #14-3 AWG Cu/Al
• Fuses are sold separately

For more than 90 years, we've been the unchallenged leader in safety switches. Our Square D brand safety switches are preferred two to one over our closest competitor. We've continued our tradition of innovation, developing new features that provide an unsurpassed level of performance, reliability, safety and ease of installation.

• QO outdoor air conditioner disconnect
• 60 Amp
• Enclosed molded case switch
• Not fusible
• Rainproof
• 240-Volt
• ANSI certified and UL listed

Siemens 60 Amp Non-Fusible Outdoor AC Disconnect. Non Fused Pullout Disconnect. 120-Volt 240-Volt rated, single phase. Power rating 10HP. Padlock to prevent unauthorized access. Mfg #WNC2060

• Non Fused Pullout Disconnect
• 120-Volt 240-Volt rated, single phase
• Power rating 10HP
• Padlock to prevent unauthorized access

An air conditioning disconnect (ACD) is a disconnect located between a loadcenter (distribution panel) and air conditioner. Eaton’s ACD product line provides an installer or repair personnel with a visible disconnecting means when performing maintenance. ACDs are also known as disconnects, pullouts or air conditioning switches. The most widely used application for ACDs is for residential and light commercial air conditioning units. An ACD is installed outdoors, in visible proximity to the air conditioner condensing unit. Metallic enclosures are galvanized steel and are installed in various locations. Nonmetallic enclosures are a plastic (polycarbonate) enclosure commonly used in coastal or salt-water areas.

• ON/OFF control provided by a pullout handle
• Pullout handle can be conveniently stored in the compartment in the OFF position, helping to prevent the handle from being misplaced
• Protective shield cannot be removed until the pullout handle is removed, disconnecting the power
• Enclosure is rated NEMA 3R for outdoor use and material is galvanized steel

Siemens offers a wide variety of air conditioning disconnects. All enclosures are outdoor rated, single phase and are either 30 Amp or 60 Amp rated. Padlocking provisions help prevent against unauthorized access. Options include steel or plastic enclosures, pull out or sliding switch disconnect, fusible or non-fused and options with GFI receptacles installed.

• 60 Amp fusible AC disconnect
• Power rating 10 HP
• Single phase 120/240-Volt rated
• Enclosure material: galvanized steel
• NEMA type 3R: enclosure is intended for outdoor use primarily to provide a degree of protection against falling rain and sleet and must remain undamaged by the formation or ice on the enclosure; they are not intended to provide protection against conditions such as dust, internal condensation or internal icing

An air conditioning disconnect (ACD) is a disconnect located between a loadcenter (distribution panel) and air conditioner. Eaton's ACD product line provides an installer or repair personnel with a visible disconnecting means when performing maintenance. ACDs are also known as disconnects, pullouts or air conditioning switches.The most widely used application for ACDs is for residential and light commercial air conditioning units. An ACD is installed outdoors, in visible proximity to the air conditioner condensing unit. Metallic enclosures are galvanized steel and are installed in various locations. Nonmetallic enclosures are a plastic (polycarbonate) enclosure commonly used in coastal or salt-water areas.

• ON/OFF control provided by a pullout handle
• Pullout handle can be conveniently stored in the compartment in the OFF position, helping to prevent the handle from being misplaced
• Protective shield cannot be removed until the pullout handle is removed, disconnecting the power
• Enclosure is rated NEMA 3R for outdoor use and material is galvanized steel

Air conditioning disconnect is a pullout, non-fused, 2-Pole, 120/240-Volt. The enclosure is non-metallic/polycarbonate. This unit is most commonly used in coastal areas affected by rust due to moisture or salt spray.

• #2 to #14 Cu/Al wire range
• Back, bottom and side knockouts
• Interrupt rating: 10 kAIC
• Enclosure: NEMA 3R
• Amperage: 60

Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• SN Series plug-on neutral load center includes 1 factory installed ground bars
• Single phase load center
• Aluminum bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

Siemens Talon branded products set the standard when it comes to enclosed receptacles and temporary power panels. This enclosed receptacle is ideal for use at camp grounds, with portable generators or any other outdoor application requiring a 30 Amp service. Includes a NEMA TT30R Receptacle.

• In-use rated and provided with a 30 Amp TT30R receptacle for use on 125-Volt max systems
• Ideal for use at camp grounds, portable generators or any other outdoor application requiring a 30 Amp service
• NEMA type 3R: enclosure is intended for outdoor use primarily to provide a degree of protection against falling rain and sleet and must remain undamaged by the formation or ice on the enclosure; they are not intended to provide protection against conditions such as dust, internal condensation or internal icing
• UL listed

Siemens offers a wide variety of air conditioning disconnects. All enclosures are outdoor rated, single phase and are either 30 or 60 Amp rated. Padlocking provisions help prevent against unauthorized access. Options include steel or plastic enclosures, pull out or sliding switch disconnect, fusible or non-fused and options with GFI receptacles installed.

• 60 Amp
• Steel enclosure
• NEMA 3R enclosure per Nema/UL requirements
• 10 HP rating
• UL Listed

Air conditioning disconnect is a 30 Amp fused pull-out, 2-Pole, 120/240-Volt unit. The enclosure is non-metallic/polycarbonate. This unit is most commonly used in coastal areas affected by rust due to moisture or salt spray.

• Type: fused pullout
• Amperage rating: 30 Amp
• Color: black
• Enclosure: NEMA 3R
• Enclosure material: polycarbonate
• Horsepower: 1.5 HP at 120-Volt, 3 HP at 240-Volt
• Interrupt rating: 10 kAIC
• Voltage rating: 120/240-Volt
• Wire size: #14-2 AWG Cu/Al

Siemens 60 Amp Fusible Outdoor AC Disconnect. 60 Amp Fusible Outdoor Ac Disconnect. Fused pullout disconnect. 120-Volt 240-Volt rated, single phase. Padlock to prevent unauthorized access. Power rating 10HP. Mfg #WFC2060

• 60 Amp Fusible Outdoor Ac Disconnect
• Fused pullout disconnect
• 120-Volt 240-Volt rated, single phase
• Padlock to prevent unauthorized access

This is an online only bundle that includes a 10-Pack of Siemens 20 Amp single pole Combination Arc Fault circuit breakers (QA120AFC). This is a great opportunity for contractors to purchase job lot quantities of our 20 Amp AFCI circuit breakers. These Siemens 20 Amp single pole AFCI circuit breakers trip to the center position and features LED trip indicators to help diagnose the cause of the last trip.

• Plug-in branch circuit breakers for Siemens PL and ES single phase load centers
• LED trip indicators for clear identification of trip cause
• 10 kA interrupting rating
• 1/4 in. more wiring bend space than previous design
• Both lugs at the same angle for easier wiring
• #14-#8 AWG copper, #12-#8 AWG aluminum wire range
• 25 lbs. in torque rating
• Siemens breakers can only be used in Murray load centers when indicated on the load center wiring diagram

This is an online only bundle that includes a 10-Pack of Siemens 15 Amp single pole Combination Arc Fault circuit breakers (QA115AFC). This is a great opportunity for contractors to purchase job lot quantities of our 15 Amp AFCI circuit breakers. These Siemens 15 Amp single pole AFCI circuit breakers trip to the center position and features LED trip indicators to help diagnose the cause of the last trip.

• Plug-in branch circuit breakers for Siemens PL and ES single phase load centers
• LED trip indicators for clear identification of trip cause
• 10 kA interrupting rating
• 1/4 in. more wiring bend space than previous design
• Both lugs at the same angle for easier wiring
• #14-#8 AWG copper, #12-#8 AWG aluminum wire range
• 25 lbs. in torque rating
• Siemens breakers can only be used in Murray load centers when indicated on the load center wiring diagram

Heavy Duty Safety Switches are available in 30-1200A ratings and in Type 1, 3R, 12, and 4X enclosures. Both fusible and non-fusible versions are offered. They can be used on circuits that are rated through 200K when protected by or used with Class R or J fuses. They feature quick make and break operation and visible blade construction.

• 100-Amp, 3-pole, 4-wire, 600-Volt fusible safety switch with neutral
• NEMA type 3R: enclosure is intended for outdoor use primarily to provide a degree of protection against falling rain and sleet and must remain undamaged by the formation or ice on the enclosure; they are not intended to provide protection against conditions such as dust, internal condensation or internal icing
• Quick-make, quick-break operating mechanism that ensures positive operation
• Visible blade, double-break switching action
• Arc chutes dissipate heat and prolong switch life
• Highly visible red handle grip is designed for hook stick operation
• Defeatable dual cover interlock
• Center punch provided for field drilling to allow ON padlocking
• Generous top, bottom and side gutters that meet or exceed NEC wire-bending space requirements
• Tangential knockouts for easy conduit lineup
• Side-hinged door that opens past 180 degree for easier wiring
• Unique enclosure design increases rigidity and prevents cuts and scrapes to conductors and installers hands
• Spring reinforced fuse clips that assure reliable contact for cool operation
• Door latch securely holds door closed and allows cover padlocking
• Front removable mechanical lugs that are suitable for CU/Al 60 degree or 75 degree C conductors
• Lugs are field convertible to copper body and to a wide variety of compression connectors
• Hinged clear line terminal shield with probe holes for inspecting or testing line side terminals
• Drawn cover for increased rigidity and resistance to abuse

Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor.

• Features Siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• SN series plug-on neutral load center includes 1 factory installed ground bars
• Single phase load center
• Aluminum bus
• NEMA type 1 enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed

General Duty Safety Switches are intended for applications where reliable performance and continuity of service are needed, but where duty requirements are not severe and usual service conditions prevail. These switches are intended for use primarily with supply circuits rated 240-Volt AC or less where the available fault current is less than 100,000 Amp when used with Class R or T fuses or 10,000 Amp max when used with Class H fuses.

• 2-Pole, 240-Volt, 400 Amp fusible safety switch
• Quick-make, quick-break operating mechanism that ensures positive operation
• Generous wiring gutters that meet or exceed NEC wire-bending space requirements
• Visible blade, double-break switch action
• Highly visible on/off indication
• Single cover interlock
• Side-hinged door that opens 180Ëš for easier wiring
• Unique enclosure design that adds rigidity and strength, its rolled edge prevents cuts and scrapes to conductors and to installer's hands
• NEMA type 1: enclosure is intended for indoor use primarily to provide protection against contact with the enclosed equipment in locations where unusual service conditions do not exist

Siemens 30 Amp Fusible Outdoor AC Disconnect. 30 Amp Fusible Outdoor Ac Disconnect. 120-Volt 240-Volt rated, single phase. Fused pullout disconnect. Power rating 10HP. Padlock to prevent unauthorized access. Mfg #WFC2030

• 30 Amp Fusible Outdoor Ac Disconnect
• 120-Volt 240-Volt rated, single phase
• Fused pullout disconnect
• Power rating 10HP