An air conditioning disconnect (ACD) is a disconnect located between a loadcenter (distribution panel) and air conditioner. Eaton's ACD product line provides an installer or repair personnel with a visible disconnecting means when performing maintenance. ACDs are also known as disconnects, pullouts or air conditioning switches.The most widely used application for ACDs is for residential and light commercial air conditioning units. An ACD is installed outdoors, in visible proximity to the air conditioner condensing unit. Metallic enclosures are galvanized steel and are installed in various locations. Nonmetallic enclosures are a plastic (polycarbonate) enclosure commonly used in coastal or salt-water areas.

• ON/OFF control provided by a pullout handle
• Pullout handle can be conveniently stored in the compartment in the OFF position, helping to prevent the handle from being misplaced
• Protective shield cannot be removed until the pullout handle is removed, disconnecting the power
• Enclosure is rated NEMA 3R for outdoor use and material is galvanized steel

Air conditioning disconnect is a 30 Amp fused pull-out, 2-Pole, 120/240-Volt unit. The enclosure is non-metallic/polycarbonate. This unit is most commonly used in coastal areas affected by rust due to moisture or salt spray.

• Type: fused pullout
• Amperage rating: 30 Amp
• Color: black
• Enclosure: NEMA 3R
• Enclosure material: polycarbonate
• Horsepower: 1.5 HP at 120-Volt, 3 HP at 240-Volt
• Interrupt rating: 10 kAIC
• Voltage rating: 120/240-Volt
• Wire size: #14-2 AWG Cu/Al