The Square D by Schneider Electric QO Value-pack 125 Amp 24-Space 24-Circuit Indoor Convertible Main Lug Load Center for Plug-on Neutral breakers includes the cover, ground bar and a selection of breakers. It is UL Listed for residential, commercial and industrial power distribution. This load center is built with a shielded, copper bus bar that is plated for reliability. QO load centers are tested and Listed only for QO circuit breakers. QO load centers are the World's Finest designed with industry leading features for flexible application. QO load centers include features engineered for fast installation and wire savings.

• Engineered for a quick plug-on neutral breaker connection on every circuit, fewer connections, faster installation and no pigtails frees up gutter space
• Includes PK15GTA ground bar, 3 QO120 QO 20 Amp single-pole circuit breakers, 2 QO230 QO 30 Amp double-pole circuit breakers and a factory-included flush cover
• Accommodates plug-on-secondary surge arrestor (sold separately)
• Overhead/underground feed simply by rotating the device before installing
• Single phase
• Rated 120/240-Volt AC and 65,000 air short circuit current rating
• Designed with straight-in mains to save expensive cable and time
• Split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior is among the most rugged in the industry
• Slot/Square D screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• Convertible mains allow you to meet changing job site requirements by field converting main breaker load centers to main lugs and vice versa
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 3 ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

Connecticut Electric manufactures new high quality replacement circuit breakers for Pushmatic load center that accept Pushmatic style circuit breakers. Circuit breakers should only be replaced with new tested and Safety Agency Listed circuit breakers. Used or refurbished ones should never be used.

• Pushmatic Replacement Breaker : P1515
• 2 - 1 Pole breakers in 1- ½" body
• Intertek ETL Listing to UL standard 489 for US and Canada-molded case circuit breakers
• Manufactured New by Connecticut Electric
• Bolt On Type
• 15/15 AMP - 120 VAC - 10,000 AIC
• May also be branded as Bulldog (i.e. Bulldog P2020)
• Class CTL circuit breaker for use in CTL listed panels

Connecticut Electric manufactures new high quality replacement circuit breakers for Stab-Lok load centers that accept NC style circuit breakers. Circuit breakers should only be replaced with new tested and Safety Agency Listed circuit breakers. Used or refurbished ones should never be used.

• Federal Pacific Replacement Breaker : NC30
• 1 Pole breaker in ½" thin body - NC Style
• Intertek ETL listing to UL standard 489 for US and Canada-molded case circuit breakers
• Manufactured New by Connecticut Electric
• For use in Stab-Lok circuit breaker panels
• Plug in type
• 30 AMP- 120 VAC - 10,000 AIC

Eatons Type CHQ circuit breakers protect the wires in your home from overheating (referred to as an overload) and fault currents (referred to as short circuits). CHQ Breakers are classified replacement circuit breakers considered suitable, by underwriters laboratories, for use in another manufacturers" load center. These breakers have been tested extensively in QO panels. This level of testing assures that the breakers meet identified standards and have been found suitable by UL for the specified purpose.

• Contractors can streamline inventory by carrying 1 manufacturer's circuit breaker versus multiple manufacturer's
• CHQ breakers are available in 1 and 2 pole configurations
• 1 pole requires 3/4 in. space, 2 pole requires 1-1/2 in. space
• Trips to the off position

The Square D by Schneider Electric QO 15 Amp Single-Pole Tandem Circuit Breaker is intended for overload and short-circuit protection of your electrical system. This breaker offers 2 circuits in the space of just 1 and is compatible with Square D QO load centers, CSED devices, and NQOD panel boards. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 AIR. All QO circuit breakers are equipped with the exclusive Visi-Trip indicator. When a QO Visi-Trip circuit breaker trips, the handle snaps to a midpoint position between in OFF and in ON and a highly visible, red indicator easily identifies the tripped breaker. This enables you to easily distinguish which breaker has tripped in a load center that may contain up to 42 different circuit breakers. QO circuit breakers have features no other manufacturer can offer. They come in many different sizes and can meet the needs of virtually every function in your home or business. These types of quality, industry exclusive products keep the Square D brand ahead of the competition and are builders' and electrical contractors' first choice in electrical protection.

• QO 2-15 Amp one-pole tandem circuit breaker
• Plug-on design, easy to install
• Compatible with Square D QO breaker boxes, CSED's and NQOD panel boards with 1 space
• For installation in 120/240-Volt AC systems
• 10,000 AIR
• Limited lifetime warranty

The QO 20 Amp Tandem Single-Pole Replacement Circuit Breaker offers 2 poles in the space of 1. The replacement breaker is for use in old-style, non-class CTL Square D QO load centers and has a maximum load of 240-Volt. The breaker features Qwik-Open and a Visi-Trip indicator to easily identify a tripped breaker.

• Square D QO 2-20 Amp one-pole tandem circuit breaker
• For installation in old-style, non-class CTL QO load centers
• Compatible with Square D QO breaker boxes and CSED devices with 1 space
• QO 20 Amp tandem one-pole replacement circuit breaker offers 2 poles in the space of 1 as the replacement breaker is for use in old-style, non-class CTL QO load centers and has a maximum load of 240-Volt
• Breaker features Qwik-Open and a Visi-Trip indicator to easily identify a tripped breaker
• Trip thermally (in an overload situation) or magnetically (under a short circuit situation)
• Quick make - quick break mechanism
• Visi-trip indicator
• 10,000 AIR
• For installation in 120/240-Volt AC systems
• UL Listed

General Electric Breaker

• 120/240 Vac
• 30A
• HACR/SWD Rated
• Requires .5 Of 1" Space
• Single Pole Thin Breaker
• Mfg #THQP-130
• 120/240 Vac
• 30A
• HACR/SWD Rated
• Requires .5 Of 1" Space

The GE Q-Line 40 Amp 1 in. Double-Pole Circuit Breaker has a case made of heat-resistant thermoset for stability and structural integrity. The unit has tin-plated copper stabs to create reliable, permanent and corrosion-resistant connections. The circuit breaker has a dedicated calibration screw which is cemented to prevent shifting. The attached screw creates a stable calibration for optimum performance.

• THQP circuit breakers can only be used in 1/2 in. compatible GE load centers
• Tin-plated copper stabs create reliable, permanent and corrosion-resistant connections
• Box type terminals
• Calibration screw is cemented to prevent shifting
• Case is made of heat-resistant thermoset for stability and structural integrity
• Trips to the center position
• Meets NEMA standards
• ANSI certified and CSA and UL Listed

With a focus on improved safety, revolutionary design and ease of installation, Leviton takes the load center into the 21st century. Leviton offers a full line of accessories to meet every need when installing the Leviton Load Center. Locking devices, lugs, ground and neutral bar kits, conduit hubs, sealing rings and more are all available to ensure an accurate and quick installation.

• Designed for use with Leviton load center panels
• Cover empty branch breaker positions
• Sleek and appealing design covers removed dead front twist-outs
• 10-year limited warranty
• Compatible with Leviton brand load center electrical panels

Connecticut Electric manufactures new high quality replacement circuit breakers for Zinsco load centers that accept Zinsco Q style circuit breakers. Circuit breakers should only be replaced with new tested and Safety Agency Listed circuit breakers. Used or refurbished circuit breakers should never be used.

• Zinsco Replacement Circuit Breaker : Q20
• 1 Pole breakers in ¾" body
• Intertek ETL listing to UL standard 489 for US and Canada-molded case circuit breakers
• Manufactured New by Connecticut Electric
• Plug in type
• 20 AMP - 120 VAC - 10,000 AIC
• May also be branded as Sylvania (i.e. Sylvania Q15)

The Square D QO 40 Amp 1-1/2 in. Double-Pole Circuit Breaker is compatible with QO load centers, QO enclosures and NQOD panel boards. The breaker features a Visi-Trip indicator to easily identify a tripped circuit in the load center. This circuit breaker has a maximum load of 240-Volt with a 10,000 AIR and uses a thermal-magnetic tripping mechanism.

• Square D QO 40 Amp two-pole circuit breaker
• QO 40 Amp two-pole circuit breaker contains a thermal-magnetic tripping mechanism and has a two-pole common trip and the breaker features a visi-trip indicator to easily identify the tripped circuit in the load center
• Breaker features a visi-trip indicator to easily identify a tripped circuit in the load center this circuit breaker has a maximum load of 240-Volt with a 10,000 AIR and uses a thermal-magnetic tripping mechanism
• Use for overload and short-circuit protection of your electrical system
• 2-pole with a common trip
• Compatible with Square D QO load centers and CSED devices with 2 spaces
• 10,000 AIR
• 120/240 VAC
• ANSI certified and UL Listed
• Limited lifetime warranty

The Square D by Schneider Electric Homeline 70 Amp Two-Pole Circuit Breaker is used for overload and short-circuit protection of your electrical system. This breaker is compatible with Square D Homeline load centers and CSED devices. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 AIR. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class. Homeline circuit breakers are the best in class. Designed exclusively for the residential market, Homeline products offer everything you need to distribute electricity throughout your home.

• Square D Homeline 70 Amp two-pole circuit breaker
• Plug-on design, easy to install
• Compatible with Square D Homeline breaker boxes and CSED devices
• For installation in 120/240-Volt AC systems
• 10,000 AIR
• Limited lifetime warranty

30 Amp General Electric Circuit Breaker

• Thqb Series Breaker
• Bolt-On
• Double Pole
• 120/240 VAC
• Mfg #THQB2130
• Thqb Series Breaker
• Bolt-On
• Double Pole
• 120/240 VAC

50 Amp General Electric Circuit Breaker

• Thqb Series Breaker
• Bolt-On
• Double Pole
• 120/240 VAC
• Mfg #THQB2150
• Thqb Series Breaker
• Bolt-On
• Double Pole
• 120/240 VAC

General Electric Thick Breaker

• 120/240 Vac
• 125
• HACR Rated
• Requires Two 1" Spaces
• Double Pole Thick Breaker
• Mfg #THQL-21125
• 120/240 Vac
• 125
• HACR Rated
• Requires Two 1" Spaces

The Square D by Schneider Electric Homeline Quad-Pole Tandem Circuit Breaker consists of (2) single-pole, 20 Amp and (1) double-pole, 50 Amp breakers. Requiring only 2 pole spaces, it is used for overload and short-circuit protection of your electrical system. This breaker is compatible with Square D Homeline load centers and CSED devices. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 AIR. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class. Homeline circuit breakers are the best in class. Designed exclusively for the residential market, Homeline products offer everything you need to distribute electricity throughout your home.

• Square D Homeline 2-20 Amp single-pole 1-50 Amp double-pole quad tandem circuit breaker
• Plug-on design, easy to install, requires 2 spaces
• Compatible with Square D Homeline breaker boxes and CSED devices
• For installation in 120/240-Volt AC systems
• 10,000 AIR
• Limited lifetime warranty

Connecticut Electric manufactures new high quality replacement circuit breakers for Zinsco load centers that accept Zinsco RC style circuit breakers. Circuit breakers should only be replaced with new tested and Safety Agency Listed circuit breakers. Used or refurbished circuit breakers should never be used.

• Zinsco Replacement Circuit Breaker : R3830
• 2 - 1 Pole breakers in ¾" body (AKA: twin, duplex, tandem)
• Intertek ETL listing to UL standard 489 for US and Canada-molded case circuit breakers
• Manufactured New by Connecticut Electric
• Plug in type
• 30/30 AMP - 120 VAC - 10,000 AIC
• May also be branded as Sylvania (i.e. Sylvania R3815)

Square D by Schneider Electric Homeline 15 Amp 1-pole Dual Function Circuit Breaker is a space and labor saving device, engineered to meet prevailing NEC requirements. This device combines 2 critical technologies; Combination Arc Fault protection and Ground Fault protection (class A) in a single, easy-to-install device. The NEC now requires both Combination Arc Fault and Ground Fault protection on all 1-Pole, 15 Amp and 20 Amp kitchen and laundry circuits. Prior to the release of this new device, a contractor or homeowners only choice would have been to use a Combination Arc Fault circuit breaker in conjunction with an expensive, bulky ground fault receptacle. The new dual function circuit breakers help reduce cost and eliminate the hassle of using 2 separate devices to provide this essential protection. It's a win for contractors and homeowners alike. Like all Square D CAFI circuit breakers, it is integrated with time saver diagnostics, a unique feature that provides additional circuit information and minimizes troubleshooting at the touch of a button.

• Square D Homeline 15 Amp Single-Pole Dual Function (CAFCI and GFCI) Circuit Breaker
• Compatible with all Square D Homeline breaker boxes with 1 space
• NEC 2020/2023/2026 Compliant
• 10000 AIR
• ANSI certified and UL Listed
• Limited lifetime warranty

Eaton provides product and service solutions for new residential construction for single-family and multi-family homes, as well as upgrades and replacements for existing homes. The Eaton Cutler-Hammer 25 Amp Double-Pole Type BR Replacement Circuit Breaker is designed to protect house wires from overheating or causing a short-circuit. The UL-listed breaker is compatible with Westinghouse, Challenger and Bryant load centers and has a maximum load of 240-Volt.

• Primary function of a circuit breaker is to protect the wire from overheating (overload) and fault currents (short circuit)
• Amperage rating: 25 Amp
• Double pole 2 in. wide breaker
• Trips to center position - must turn off then turn back on
• For use in type BR load centers
• Type BR breakers are UL approved genuine replacement breakers for load centers made by Westinghouse, Challenger and Bryant
• Interrupt rating - 10 kAIC
• Voltage rating is 120/240-Volt
• Wire size - #14-4 AWG Cu/Al at 60 degree C or 75 degree C

The QO 60 Amp 1-1/2 in. Double-Pole Circuit Breaker has a common trip with a maximum load of 240-Volt. The breaker features Qwik-Open and a Visi-Trip indicator to easily identify a tripped circuit in the load center. This circuit breaker uses a thermal-magnetic tripping mechanism and has a 10,000 AIR. This QO breaker is compatible with Square D's QO breaker boxes and CSEDs with 2 spaces.

• Square D QO 60 Amp two-pole circuit breaker
• QO 60 Amp two-pole circuit breaker contains a thermal-magnetic tripping mechanism and has a two-pole common trip and the breaker features a visi-trip indicator to easily identify the tripped circuit in the load center
• Breaker features a visi-trip indicator to easily identify a tripped circuit in the load center this circuit breaker has a maximum load of 240-Volt with a 10,000 AIR and uses a thermal-magnetic tripping mechanism
• Install for overload and short-circuit protection of your electrical system
• 2-pole with a common trip
• Compatible with Square D QO breaker boxes and CSED devices with 2 spaces
• 10,000 AIR
• 120/240 VAC
• ANSI certified and UL Listed

The Square D by Schneider Electric QO 15 Amp Single-Pole Combination Arc-Fault Circuit Interrupting (CAFCI) Circuit Breaker is for use to help protect your wires from arcing faults and is intended for overload and short-circuits protection of your electrical system. Now standard in all Square D brand CAFCI circuit breakers, Time-Saver Diagnostics provide advanced trip indication technology, helping identify the type of fault that has occurred faster. Time-Saver Diagnostics helps take away the guess work and provides diagnostic assistance by identifying the type of fault that last occurred. It saves money by reducing troubleshooting time, simple to use, accurate and reliable. On top of that, all QO circuit breakers are equipped with the exclusive Visit-Trip indicator. When a QO Visit-Trip circuit breaker trips, the handle snaps to a midpoint position between OFF/ON and a highly visible, red indicator easily identifies the tripped breaker. This enables you to easily distinguish which breaker has tripped in a load center that may contain up to 42 different circuit breakers. QO circuit breakers have features no other manufacturer can offer. They come in many different sizes and can meet the needs of virtually every function in your home or business. These types of quality, industry exclusive products keep the Square D brand ahead of the competition and are builders' and electrical contractors' first choice in electrical protection.

• Square D QO 15 Amp single-pole combination AFCI circuit breaker
• Compatible with Square D QO breaker boxes, CSED's and NQOD panel boards
• This breaker needs 1 space in a breaker box for installation.
• 120-Volt AC
• 10,000 AIR
• Limited lifetime warranty

General Electric Circuit Breaker

• 120/240 Vac
• 50A
• HACR Rated
• Requires One 1" Space
• Double Pole Thin Breaker
• Mfg #THQP250
• 120/240 Vac
• 50A
• HACR Rated
• Requires One 1" Space

Eatons Cutler-Hammer Type CH circuit breakers protect the wires in your home from overheating (referred to as an overload) and fault currents (referred to as short circuits). Our CH breakers are 3/4 in. wide and trip to the off position. They are available in 1, 2 or 3 poles from 10 to 150 Amp. In addition, arc fault and ground fault breakers are available in the Type CH line. All our Type CH breakers come with a lifetime warranty and are made exclusively for Cutler-Hammer Type CH Load centers.

• 2-pole
• 125 Amp
• Quad breaker
• Lifetime warranty

The Eaton Cutler-Hammer 15 Amp 1 in. Single-Pole Type BR Replacement Circuit Breaker is designed to protect house wires from overheating or causing a short-circuit. Single pole breaker applications include use lighting fixtures. The UL-listed breaker is compatible with Westinghouse, Challenger and Bryant load centers and has a maximum load of 240-Volt.

• Primary function of a circuit breaker is to protect the wire from overheating (overload) and fault currents (short circuit)
• Amperage rating: 15 Amp
• Single pole 1 in. wide breaker
• Trips to center position - must turn off then turn back on
• For use in type BR load centers
• Type BR breakers are UL approved genuine replacement breakers for load centers made by Westinghouse, Challenger and Bryant
• Interrupt rating - 10 kAIC
• Voltage rating is 120/240-Volt
• Wire size - #14-4 AWG Cu/Al at 60 degree C or 75 degree C
• Gauge/number of wires with ground - 14/2

Circuit breakers protect the wires in your home from overheating (referred to as an overload) and fault currents (referred to as short circuits). The Eaton Cutler-Hammer Quadplex or Quad type Circuit Breaker is designed to create (4) circuits in (2) spaces. This allows for 240-Volt circuits. The BQC style breaker has a common trip as well as a rejection tab feature. These breakers are designed for use in BR type load centers and should be installed only in panel positions that have notched bus stabs that accommodate the rejection clip. Also, BQC circuit breakers are UL approved genuine replacement breakers for load centers made by Westinghouse, Challenger and Bryant.

• Primary function of a circuit breaker is to protect the wire from overheating (overload) and fault currents (short circuit)
• Amperage - (1) 2-pole 20 Amp and (1) 2-pole 30 Amp
• Number of poles - 4
• Trip type - common
• For use in type BR load centers
• Interrupt rating - 10 kAIC
• Voltage rating is 120/240-Volt
• Wire size - #14-4 AWG Cu/Al at 60 degree C or 75 degree C
• Carry listing for HACR applications
• Breaker has a rejection tab feature

This is a main lug kit for Type CH load centers. It is for a 225 Amp panel. Eaton is a trusted name in electrical products for over 175-years.

• Used in type CH convertible type load centers
• Maximum amperage rating for type CH convertible panels is 225 Amp
• Can be used with the CH8N200RF, CH32N225J, CH32N225R, CH42N225K and CH42N225R panels
• Wire size is #4300kcmil

The 2014 NEC has mandated Ground Fault and Arc Fault circuit protection on many 15 Amp and 20 Amp kitchen and laundry circuits. General Electric offers both Ground Fault and Combination Arc Fault (GFCI and CAFCI) protection in a simple to apply and cost effective solution. GFCI protection guards against ground fault as an effective means of preventing electrical shocks. GFCI circuit breakers accomplish this by detecting when current is "leaking" somewhere outside its intended path. If your body provides path to ground for this "leakage" you could be burned, shocked or even electrocuted. CAFCI protection guards against damage or fires which can result from arcing and sparking that can arise from deteriorated wires, poor connections and breaches in wire insulation. With more than 67,000 home fires claiming more than 485 lives and injuring 2,300 victims annually, the added safety provided by CAFCI protection is an important step forward in reducing this risk.

• GE DFCI has important features for assisting you or your electrician in troubleshooting a trip, should the DFCI trip, the yellow LED will blink to indicate the last known trip condition
• Indicates the last known trip condition by illuminating LED appearing for 5-seconds each time the DFCI is turned on for up to 30-days
• Units last known trip condition can be cleared by performing a series of functions provided in the instructions
• DFCI has a self-test feature that meets a June 2015 requirement from UL on all ground fault circuit breakers
• Must be used with a dedicated neutral can't be used with a shared neutral

Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your homes electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home's wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current.

• 2-pole, 15 Amp, 240-Volt type QP circuit breaker
• 10,000 AIC interrupting rating
• Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
• Compatible with Siemens PL and ES series load centers
• Use for overload and short-circuit protection of your electrical system
• Thermal-magnetic

General Electric Arc-Fault Circuit Interrupter

• 120/240 Vac
• 15A
• Required In 2002 By NEC
• Single Pole
• Mfg #THQL115AF
• 120/240 Vac
• 15A
• Required In 2002 By NEC
• Single Pole

30 Amp General Electric Circuit Breaker

• Thqb Series Breaker
• Bolt-On
• Single Pole
• 120/240 VAC
• Mfg #THQB1130
• Thqb Series Breaker
• Bolt-On
• Single Pole
• 120/240 VAC

Square D by Schneider Electric Homeline 15 Amp 1-pole Plug-on Neutral Dual Function Circuit Breaker is a space and labor saving device, engineered to meet prevailing National Electric Code requirements. This device combines 2 critical technologies; Combination Arc Fault protection and ground fault protection (class A), in a single, easy-to-install device. The National Electric Code now requires both Combination Arc Fault and ground fault protection on all 1-Pole, 15 Amp and 20 Amp kitchen and laundry circuits. Prior to the release of this new device, a contractor or homeowners only choice would have been to use a Combination Arc Fault circuit breaker in conjunction with an expensive, bulky ground fault receptacle. The new dual function circuit breakers help reduce cost and eliminate the hassle of using 2 separate devices to provide this essential protection. It's a win for contractors and homeowners alike. Designed for reliability, the Homeline Plug-on Neutral Dual Function Circuit Breaker connects directly to the neutral bar, providing a time and labor-saving installation. Several advantages from the plug-on neutral design are fewer connections which lead to faster installation and an innovative neutral clip eliminates pigtails which in turn frees gutter space. Like all Square D CAFI circuit breakers, it is integrated with time saver diagnostics, a unique feature that provides additional circuit information and minimizes troubleshooting at the touch of a button.

• Square D Homeline 15 Amp Single-Pole Plug-On Neutral Dual Function (CAFCI and GFCI) Circuit Breaker
• Innovative neutral connection design leads to fewer connections and faster installation, no pigtails which frees up gutter space
• NEC 2020/2023/2026 Compliant
• This breaker needs 1 space in a Plug on Neutral breaker box for installation.
• 120 V AC
• 10000 AIR
• ANSI certified and UL Listed
• Limited lifetime warranty

Leviton is proud to bring the Load Center into the 21st century with a focus on improved safety and ease of installation. Thanks to its revolutionary design, all hot and neutral wires terminate at custom lugs in the panel, rather than at the circuit breaker*, which allows the entire panel to be wired at rough-in. Branch circuit breakers are simply plugged-in at final installation, increasing jobsite efficiency. Leviton Hydraulic Magnetic standard branch circuit breakers are designed to perform effectively even in the harshest environments, and feature an intuitive color indicator in the handle, which designates operational status at-a-glance.

• EASY - The Load Center can be wired without any breakers present
• HYDRAULIC MAGNETIC - Operates as intended from -40°F to 185°F
• COMFORTABLE - Rocker-style switches require less force to operate
• Compatible with Leviton brand load center electrical panels

Leviton Circuit Breakers provide overload and short-circuit protection and feature an all plug-on design. All hot and neutral wires terminate at custom lugs in the panel, not at the circuit breaker, so the entire panel can be wired without circuit breakers installed. Branch circuit breakers can be easily plugged on at final installation. They also feature color indicators in the handle to easily see operational status at-a-glance. For applications up to 60 Amp when using copper wire or 50 Amp when using aluminum wire.

• Simple - features an all plug-on design - no wiring to the circuit breaker
• Intuitive - color indicators in the handle to easily see operational status at-a-glance
• Approachable - contemporary aesthetic and rocker style handle are more user friendly
• 10 kA short-circuit rating
• Compatible with Leviton brand load center electrical panels

Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your homes electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home's wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current.

• 2-pole, 70 Amp, 240-Volt type QP circuit breaker
• 10,000 AIC interrupting rating
• Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
• Compatible with Siemens PL and ES series load centers
• Use for overload and short-circuit protection of your electrical system
• Thermal-magnetic

Connecticut Electric manufactures new high quality replacement circuit breakers for Zinsco load centers that accept Zinsco Q style circuit breakers. Circuit breakers should only be replaced with new tested and Safety Agency Listed circuit breakers. Used or refurbished circuit breakers should never be used.

• Zinsco Replacement Circuit Breaker : Q15
• 1 Pole breakers in ¾" body
• Intertek ETL listing to UL standard 489 for US and Canada-molded case circuit breakers
• Manufactured New by Connecticut Electric
• Plug in type
• 15 AMP - 120 VAC - 10,000 AIC
• May also be branded as Sylvania (i.e. Sylvania Q15)

Connecticut Electric manufactures new high quality replacement circuit breakers for Zinsco load centers that accept Zinsco RC style circuit breakers. Circuit breakers should only be replaced with new tested and Safety Agency Listed circuit breakers. Used or refurbished ones should never be used.

• Zinsco Replacement Circuit Breaker : RC3850
• 2 Pole breaker in ¾" body
• Intertek ETL Listing to UL standard 489 for US and Canada-molded case circuit breakers
• Manufactured New by Connecticut Electric
• Plug in type
• 50 AMP - 120/240 VAC - 10,000 AIC
• May also be branded as Sylvania (i.e. Sylvania RC 3850)

The Square D by Schneider Electric Homeline 30 Amp Two-Pole Circuit Breaker is used for overload and short-circuit protection of your electrical system. This breaker is compatible with Homeline load centers and CSED devices. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 AIR. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class. Homeline circuit breakers are the best in class. Designed exclusively for the residential market, Homeline products offer everything you need to distribute electricity throughout your home.

• Homeline 30 Amp two-pole circuit breaker
• Plug-In design, easy to install
• Compatible with Homeline load centers and CSED devices
• 120/240-Volt AC
• 10,000 AIR
• Limited lifetime warranty

Eaton has enhanced its premium Type CH residential circuit breakers, making the best even better. In addition to the industry exclusive "Trip to OFF" and simple 1-Step Reset feature, Eaton has added a trip flag to visibly indicate breaker status. Along with Tri-Drive screws and new markings that highlight ratings and the Eaton brand.

• Primary function of a circuit breaker is to protect the wire from overheating (overload) and fault currents (short circuit)
• Amperage rating: 20 Amp
• 3/4 in. single pole breaker
• Flag visually confirms tripped status, making it easy for the homeowner to identify
• For use in type CH load centers only
• Interrupt rating - 10 kAIC
• Voltage rating is 120/240-Volt
• (1) #14-8, (2) #14-10 AWG Cu/Al 60 degree C or 75 degree C
• HACR rated

Siemens GFCI circuit breakers are UL Listed and CSA Certified as Class A devices. These circuit breakers offer the new Self-Test and Lockout feature as required by UL 943, enabling the GFCI to automatically and continuously test itself to ensure that it is working properly. If it is detected that the device has been compromised, the device trips itself and locks out the homeowner from resetting the device, reducing the possibility of the homeowner incorrectly assuming that the device was tripped to prevent a ground fault.

• Single pole, 120-Volt, 15 Amp GFCI circuit breaker
• 10kA interrupting rating
• Includes self-test as required by UL 943 as an added safety feature
• Suitable for a variety of construction applications including spas, hot tubs, kitchens, bathrooms, etc.

The GE Q-Line 20 Amp 1 in. Double-Pole Circuit Breaker has tin-plated copper stabs to create reliable, permanent and corrosion-resistant connections. The unit has a dedicated calibration screw which is cemented to prevent shifting. The attached screw creates a stable calibration for optimum performance. The case is made of heat-resistant thermoset for stability and structural integrity.

• THQP circuit breakers can only be used in 1/2 in. compatible GE load centers
• Tin-plated copper stabs create reliable, permanent and corrosion-resistant connections
• Box type terminals
• Calibration screw is cemented to prevent shifting
• Case is made of heat-resistant thermoset for stability and structural integrity
• Trips to the center position
• Meets NEMA standards
• ANSI certified and CSA and UL listed

Reliable product from the technology leader. Technology enabling reliability. When it comes to ready availability, easy installation and fewer callbacks, you need a manufacturer you can trust. Our products and systems are engineered to take on the most demanding conditions, always service and maintenance network, complete support is always there.

• For use on Siemens ultimate and Murray rock solid load centers, 150 Amp and higher, to connect the main breaker to a 2-pole circuit breaker
• Works for utility main breaker types MBK150A, MBK200A or MBK225A
• Standby main breaker types QP, QPH, HQPH accepted
• Manual transfer interlock kits convert load center or meter combination into standby power panels, corrosion resistant finish, this product is UL listed for use in most Siemens load centers and meter combinations
• Unit is suitable for use with optional standby systems in accordance with article 702 of the NEC

Eaton has enhanced its premium Type CH residential circuit breakers, making the best even better. In addition to the industry exclusive "Trip to OFF" and simple 1-Step Reset feature, Eaton has added a trip flag to visibly indicate breaker status. Along with Tri-Drive screws and new markings that highlight ratings and the Eaton brand.

• Primary function of a circuit breaker is to protect the wire from overheating (overload) and fault currents (short circuit)
• Amperage rating: 20 Amp
• Double pole breaker
• Flag visually confirms tripped status, making it easy for the homeowner to identify
• For use in type CH load centers only
• Interrupt rating - 10 kAIC
• Voltage rating is 120/240-Volt
• (1) #14-8, (2) #14-10 AWG Cu/Al 60 degree C or 75 degree C
• HACR rated

The Square D QO 100 Amp Main Breaker 24-Space 24-Circuit Convertible Outdoor Plug-on Neutral Load Center for Plug-on Neutral and non-CTL tandem breakers is UL Listed for residential, commercial and industrial power distribution. This breaker box has 24 spaces with a maximum circuit capacity of 24 circuits when using non-CTL QO tandem breakers. This load center is built with a shielded, copper bus bar that is plated for reliability. QO load centers are tested and listed only for QO circuit breakers. QO load centers are the "World's Finest" designed with industry leading features for flexible application. QO load centers include features engineered for fast installation and wire savings.

• Engineered for a quick plug-on neutral breaker connection on every circuit, fewer connections, faster installation and no pigtails frees up gutter space
• Includes a factory-installed rainproof cover
• Square D QO breaker box has 24 spaces with a max circuit capacity of 24 circuits when using non-CTL QO tandem breakers
• Accommodates plug-on secondary surge arrestor (sold separately)
• Overhead/underground feed simply by rotating the device before installing
• Single phase
• Rated 120-Volt/240-Volt AC and 22,000 air short circuit current rating
• Designed with straight-in mains to save expensive cable and time
• Split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• Convertible mains allow you to meet changing job site requirements by field converting main breaker load centers to main lugs and vice versa
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 3 ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

The Square D by Schneider Electric Homeline Quad-Pole Tandem Circuit Breaker consists of (2) single-pole, 20 Amp and (1) double-pole, 20 Amp breakers. Requiring only 2 pole spaces, it is used for overload and short-circuit protection of your electrical system. This breaker is compatible with Homeline load centers and CSED devices. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 Air. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class. Homeline circuit breakers are the best in class. Designed exclusively for the residential market, Homeline products offer everything you need to distribute electricity throughout your home.

• Homeline 2-20 Amp single-pole 1-20 Amp double-pole quad tandem circuit breaker
• Plug-on design, easy to install
• Compatible with Homeline load centers and CSED devices
• 120/240-Volt AC
• 10,000 AIR
• Limited lifetime warranty

This 100 Amp Double-Pole Main Breaker Conversion Kit is designed to convert a main lug load center to a main breaker load center. The breaker has a maximum load of 240-Volt and is suitable for use in 100 Amp load centers. This ANSI-certified and CSA and UL-listed converter is compatible for use in both Murray and Siemens' Ultimate Load Centers. Allows for a means of disconnect in a single switch for all circuits in your Siemens Load Center.

• Use to convert a main lug load center to a main breaker load center
• Bolt on main breaker designed for use in ultimate load centers
• Interrupting rating of 22KA 120/240V AC
• ANSI certified and CSA and UL listed

The Square D by Schneider Electric QO 30 Amp Two-Pole Circuit Breaker is intended for overload and short-circuit protection of your electrical system. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 AIR. All QO circuit breakers are equipped with the exclusive Visi-Trip indicator. When a QO Visi-Trip circuit breaker trips, the handle snaps to a midpoint position between "OFF" and "ON" and a highly visible, red indicator easily identifies the tripped breaker. This enables you to easily distinguish which breaker has tripped in a load center that may contain up to 42 different circuit breakers. QO circuit breakers have features no other manufacturer can offer. They come in many different sizes and can meet the needs of virtually every function in your home or business. These types of quality, industry exclusive products keep the Square D brand ahead of the competition and are builders' and electrical contractors' first choice in electrical protection.

• Square D QO 30 Amp two-pole circuit breaker
• Plug-on design, easy to install
• Compatible with Square D QO breaker boxes, CSED's and NQOD panel boards
• This breaker needs 2 spaces in a breaker box for installation
• 120/240-Volt AC
• 10,000 AIR
• ANSI certified and UL Listed
• Limited lifetime warranty

Eatons Type CHQ circuit breakers protect the wires in your home from overheating (referred to as an overload) and fault currents (referred to as short circuits). CHQ Breakers are classified replacement circuit breakers considered suitable, by underwriters laboratories, for use in another manufacturers" load center. These breakers have been tested extensively in QO panels. This level of testing assures that the breakers meet identified standards and have been found suitable by UL for the specified purpose.

• Contractors can streamline inventory by carrying 1 manufacturer's circuit breaker versus multiple manufacturer's
• CHQ breakers are available in 1 and 2 pole configurations
• 1 pole requires 3/4 in. space, 2 pole requires 1-1/2 in. space
• Trips to the off position

The Eaton CSR 200 Amp Double-Pole Main Breaker Kit is sized to trip before the total current draw of the panel exceeds the current carrying capacity of the feed from the electric company. This breaker is intended for use as a main breaker in a main breaker or meter breaker load center to deliver electricity to the branch circuit breakers. This unit can also be used as a service disconnect.

• For use as a main breaker in a main breaker or meter breaker load center or as a service disconnect
• Delivers electricity to branch circuit breakers within the load center
• Trips to the center position
• 120/240-Volt
• 25,000 AIC
• Suitable for use with type ECB unit enclosures, such as an Eaton meter breaker load center
• ANSI certified and UL listed
• Breaker is sized to trip before the total current draw of the panel exceeds the current carrying capacity of the feed from the electric company
• Bolt-on installation
• Double pole
• 200 Amp replacement circuit breaker