The RK5 fuse provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from single phasing on three phase systems. Simplifies and improves blackout prevention (selective coordination). Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short-circuit and overload protection. The overload element provides protection against low level overcurrent of overloads and will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds.

• 15 Amp
• 250-Volt
• UL Listed
• 1-pack

Eatons Arc Fault Circuit Interrupters (AFCIs) use advanced electronic technology to reduce fire hazards in electrical circuits, including connected cords. They meet the requirements of the UL Standard for Safety, UL 1699 for devices that reduce the effects of persistent arcing faults that may pose a risk of fire under certain conditions. Arcing creates high intensity heating at the point of the arc resulting in burning particles that may over time ignite surrounding material, such as wood framing or insulation. The CHFCAF120 is a 20 Amp combination type breaker that includes all the protection of the branch feeder, plus it directly detects persistent low current arcing faults down to 5 Amp to efficiently protect against fire hazards in the cords connected to outlets.

• Combination type includes all the protection of the branch feeder, plus it directly detects persistent low current arcing faults down to 5 Amp to efficiently protect against fire hazards in the cords connected to outlets
• Branch feeder mitigates parallel arcing faults, which produce the most energy of all arcing faults, in the complete circuit including connected cords for enhanced safety
• For use in type CH load centers
• Amp: 20 Amp

Specially designed for easy installation, Eaton's BR load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The BR48L125SP is a 125 Amp main lug with 4-spaces and 8-circuits.

• Amperage rating: 125 Amp
• Bus material: aluminum
• Rated NEMA 1 for indoor use
• Interrupt rating: 10 kAIC
• Mounting: surface
• Number of circuits: 8
• Number of spaces: 4
• Phase: single-phase
• Voltage rating: 120/240-Volt
• Wire size: #14-1/0 AWG Cu/Al at 60 degree C or 75 degree C
• Tangential center knockout easier installation for conduit applications
• Steel back pan provides solid and reliable breaker mounting single piece design for stability and durability
• Single keyhole mounting - provides easier mounting and leveling
• Drywall marking on enclosure - indicates proper mounting depth for flush applications
• Used with: type BR breakers

The Fusetron Dual Element Time-Delay Fuse is a Class RK5 that provides current limiting. The current limiting rating is 10 seconds (minimum) at 500% rated Amps. The fuse is made of Fiberglass tube. Typical applications include power panelboards, motor control centers, combination starters and machinery disconnect.

• 40 Amp
• 250-Volt
• UL Listed
• Quantity of 1

The RK5 fuse provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from single phasing on three phase systems. Simplifies and improves blackout prevention (selective coordination). Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short-circuit and overload protection. The overload element provides protection against low level overcurrent of overloads and will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds.

• 50 Amp
• 250-Volt
• UL Listed
• High SCCR

This time-delay cartridge fuse has an advanced protection energy-efficient Class RK5 dual element. This limits the current on the time-delay fuse with optional open fuse indication on select ratings. The time-delay is 10-seconds (minimum) at 500% of rated current (8-seconds for 1 10-30 Amp sizes).

• Provides motor overload, ground fault and short-circuit protection
• Helps protect motors against burnout from overloads
• Helps protect motors from burnouts from single-phasing on 3-phase systems
• Simplifies and improves blackout prevention (selective coordination)
• Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short-circuit and overload protection
• Overload element provides protection against low level overcurrent of overloads and holds an overload which is 5-times greater than the ampere rating of the fuse for a minimum of ten seconds
• CE, UL Listed, standard 248-12, Class RK-5, Guide JDDZ, File E4273
• CSA Certified, C22.2 No. 248.12, Class 1422-02, file 53787

Murray offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home's electrical system. To provide additional protection Murray offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and voltage spikes. Circuit breakers are intended for switching and protection of your home's wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current.

• Single pole, 20 Amp 120-Volt type MP circuit breaker
• 10,000 AIC interrupting rating
• Murray type MP circuit breakers provide easy plug-in connections in Murray enclosures and the time saving insta-wire feature
• Compatible with Murray rock solid load centers
• Use for overload and short-circuit protection of your electrical system
• Thermal-magnetic
• Provides a manual means of energizing and de-energizing a circuit
• Easy plug in connections in Murray load centers

Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short-circuit and overload protection. The overload element provides protection against low level overcurrent of overloads and will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. Simplifies and improves blackout prevention (selective coordination). Helps protect motors against burnout from single phasing on three phase systems.

• 60 Amp
• 250-Volt
• UL Listed
• Blackout prevention

The RK5 fuse provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from single phasing on 3 Phase systems. Simplifies and improves blackout prevention (selective coordination). Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short-circuit and overload protection. The overload element provides protection against low level overcurrent of overloads and will hold an overload which is 5-times greater than the ampere rating of the fuse for a minimum of 10-seconds.

• 100 Amp
• 250-Volt
• UL Listed
• 1-pack