Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home's electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home's wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current.

• Single pole, 20 Amp 120-Volt type QP interchangeable circuit breaker
• 10,000 AIC interrupting rating
• Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
• Compatible with Siemens PL and ES series load centers
• Use for overload and short-circuit protection of your electrical system
• Thermal-magnetic

The Square D by Schneider Electric Homeline 20 Amp One-Pole Circuit Breaker is used for overload and short-circuit protection of your electrical system. This breaker is compatible with Homeline load centers and CSED devices. The ANSI-certified and UL-Listed unit is rated for 120/240 VAC and 10,000 AIR. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class. Homeline circuit breakers are the best in class. Designed exclusively for the residential market, Homeline products offer everything you need to distribute electricity throughout your home.

• Homeline 20 Amp one-pole circuit breaker
• Plug-In design, easy to install
• Switching duty rating (SWD) for 20 Amp one-pole breakers
• Compatible with Homeline load centers and CSED devices
• 120/240-Volt AC
• 10,000 AIR
• Limited lifetime warranty

An air conditioning disconnect (ACD) is a disconnect located between a loadcenter (distribution panel) and air conditioner. Eaton's ACD product line provides an installer or repair personnel with a visible disconnecting means when performing maintenance. ACDs are also known as disconnects, pullouts or air conditioning switches.The most widely used application for ACDs is for residential and light commercial air conditioning units. An ACD is installed outdoors, in visible proximity to the air conditioner condensing unit. Metallic enclosures are galvanized steel and are installed in various locations. Nonmetallic enclosures are a plastic (polycarbonate) enclosure commonly used in coastal or salt-water areas.

• ON/OFF control provided by a pullout handle
• Pullout handle can be conveniently stored in the compartment in the OFF position, helping to prevent the handle from being misplaced
• Protective shield cannot be removed until the pullout handle is removed, disconnecting the power
• Enclosure is rated NEMA 3R for outdoor use and material is galvanized steel

Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home's electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home's wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current.

• Single pole, 15 Amp 120-Volt type QP interchangeable circuit breaker
• 10,000 AIC interrupting rating
• Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
• Compatible with Siemens PL and ES series load centers
• Use for overload and short-circuit protection of your electrical system
• Thermal-magnetic

The Square D by Schneider Electric Homeline 15 Amp One-Pole Circuit Breaker is used for overload and short-circuit protection of your electrical system. This breaker is compatible with Homeline load centers and CSED devices. The ANSI-certified and UL-Listed unit is rated for 120/240 VAC and 10,000 AIR. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class. Homeline circuit breakers are the best in class. Designed exclusively for the residential market, Homeline products offer everything you need to distribute electricity throughout your home.

• Homeline 15 Amp one-pole circuit breaker
• Plug-In design, easy to install
• Switching duty rating (SWD) for 15 Amp one-pole breakers
• Compatible with Homeline load centers and CSED devices
• 120/240-Volt AC
• 10,000 AIR
• Limited lifetime warranty

Eaton has enhanced its premium Type CH residential circuit breakers, making the best even better. In addition to the industry exclusive "Trip to OFF" and simple 1-Step Reset feature, Eaton has added a trip flag to visibly indicate breaker status. Along with Tri-Drive screws and new markings that highlight ratings and the Eaton brand.

• Primary function of a circuit breaker is to protect the wire from overheating (overload) and fault currents (short circuit)
• Amperage rating: 20 Amp
• 3/4 in. single pole breaker
• Flag visually confirms tripped status, making it easy for the homeowner to identify
• For use in type CH load centers only
• Interrupt rating - 10 kAIC
• Voltage rating is 120/240-Volt
• (1) #14-8, (2) #14-10 AWG Cu/Al 60 degree C or 75 degree C
• HACR rated

Eaton has enhanced its premium Type CH residential circuit breakers, making the best even better. In addition to the industry exclusive "Trip to OFF" and simple 1-Step Reset feature, Eaton has added a trip flag to visibly indicate breaker status. Along with Tri-Drive screws and new markings that highlight ratings and the Eaton brand.

• Primary function of a circuit breaker is to protect the wire from overheating (overload) and fault currents (short circuit)
• Amperage rating: 15 Amp
• 3/4 in. single pole breaker
• Flag visually confirms tripped status, making it easy for the homeowner to identify
• For use in type CH load centers only
• Interrupt rating - 10 kAIC
• Voltage rating is 120/240-Volt
• (1) #14-8, (2) #14-10 AWG Cu/Al 60 degree C or 75 degree C
• HACR rated

The Square D by Schneider Electric QO 30 Amp Two-Pole Circuit Breaker is intended for overload and short-circuit protection of your electrical system. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 AIR. All QO circuit breakers are equipped with the exclusive Visi-Trip indicator. When a QO Visi-Trip circuit breaker trips, the handle snaps to a midpoint position between "OFF" and "ON" and a highly visible, red indicator easily identifies the tripped breaker. This enables you to easily distinguish which breaker has tripped in a load center that may contain up to 42 different circuit breakers. QO circuit breakers have features no other manufacturer can offer. They come in many different sizes and can meet the needs of virtually every function in your home or business. These types of quality, industry exclusive products keep the Square D brand ahead of the competition and are builders' and electrical contractors' first choice in electrical protection.

• Square D QO 30 Amp two-pole circuit breaker
• Plug-on design, easy to install
• Compatible with Square D QO breaker boxes, CSED's and NQOD panel boards
• This breaker needs 2 spaces in a breaker box for installation
• 120/240-Volt AC
• 10,000 AIR
• ANSI certified and UL Listed
• Limited lifetime warranty

Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your homes electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home's wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current.

• 2-pole, 15 Amp, 240-Volt type QP circuit breaker
• 10,000 AIC interrupting rating
• Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
• Compatible with Siemens PL and ES series load centers
• Use for overload and short-circuit protection of your electrical system
• Thermal-magnetic

Bussmann 3 Amp Fast Acting Blade Fuse. Bussmann Atc Blade-Type Fuse. 32 Volt. 3 Amp. Fast Acting. For HVAC Control Boards, Automotive And Small Appliance Circuits. Package Of 5. Mfg #BP/ATC-3-RP. Mfg #BP/ATC-3-RP

• Bussmann Atc Blade-Type Fuse
• 32 Volt
• 3 Amp
• Fast Acting

The Square D by Schneider Electric Homeline 60 Amp Two-Pole Circuit Breaker is used for overload and short-circuit protection of your electrical system. This breaker is compatible with Homeline load centers and CSED devices. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 AIR. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class. Homeline circuit breakers are the best in class. Designed exclusively for the residential market, Homeline products offer everything you need to distribute electricity throughout your home.

• Square D Homeline 60 Amp two-pole circuit breaker
• Plug-on design, easy to install
• Compatible with Square D Homeline breaker boxes and CSED devices
• This breaker needs 2 spaces in a breaker box for installation
• 120/240-Volt AC
• 10,000 AIR
• Limited lifetime warranty

Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home's electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home's wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current.

• 2-pole, 30 Amp, 120-Volt/240-Volt type QP interchangeable circuit breaker
• 10,000 AIC interrupting rating
• Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
• Compatible with Siemens PL and ES series load centers
• Use for overload and short-circuit protection of your electrical system
• Thermal-magnetic

Bussmann 5 Amp Fast Acting Blade Fuse. Bussmann Atc Blade-Type Fuse. 32 Volt. 5 Amp. Fast Acting. For HVAC Control Boards, Automotive And Small Appliance Circuits. Pkg Of 5. Mfg #BP/ATC-5-RP. Mfg #BP/ATC-5-RP

• Bussmann Atc Blade-Type Fuse
• 32 Volt
• 5 Amp
• Fast Acting

The Cooper Bussmann FRN Series 30 Amp Brass Time Delay Fuse Cartridges (2-Pack) have fiberglass tubes and are current limiting, Class RK5, dual-element time-delay fuses with a 10-second minimum at 500% design. Typical applications include power panel boards, motor control centers, combination starters and machinery disconnects. These fuse cartridges are UL- and CSA Listed for safety.

• Used in power panel boards, motor control centers, combination starters and machinery disconnects
• Operating maximum of 30 Amp
• Operating maximum of 250-Volt
• UL Listed

The Square D Homeline 100 Amp 6-Space 12-Circuit Outdoor fixed Main Lugs Load Center is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Durable Outdoor Design: Square D Homeline 100 Amp 6-Space 12-Circuit Outdoor Main Lug Load Center with a rainproof cover for reliable outdoor use
• Includes a rainproof outdoor cover
• Supports Secondary Surge Protection: Compatible with plug-on secondary surge arrestors (sold separately) for enhanced electrical safety
• Flexible Wiring Options: Main feeders terminate from the top, with feeder entry possible from any direction (device is not rotatable)
• Easy Wire Installation: Features knockouts on all sides of the breaker box for quick and hassle-free wire routing
• Single-Phase, Outdoor Rated: Designed for outdoor installation with a 120/240 VAC rating and 10,000 AIR short circuit current rating
• Rated 120/240 VAC and 10,000 AIR short circuit current rating
• Secure and Theft-Resistant: Includes a rainproof cover with a stainless steel hasp that can be padlocked for added safety
• Rugged Construction: Thermoplastic interior assembly offers industry-leading durability for long-term use
• Convenient Screw Design: Slot/square drive screws allow use of either a flat blade or square-head screwdriver for secure and precise installation
• Customizable Grounding Options: Includes 3 ground bar mounting locations (left, right, and end) for ease of wiring

Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your homes electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home's wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current.

• 2-pole, 20 Amp, 120-Volt /240-Volt type QP interchangeable circuit breaker
• 10,000 AIC interrupting rating
• Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
• Compatible with Siemens PL and ES series load centers
• Use for overload and short-circuit protection of your electrical system
• Thermal-magnetic

The Square D by Schneider Electric Homeline 30 Amp Two-Pole Circuit Breaker is used for overload and short-circuit protection of your electrical system. This breaker is compatible with Homeline load centers and CSED devices. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 AIR. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class. Homeline circuit breakers are the best in class. Designed exclusively for the residential market, Homeline products offer everything you need to distribute electricity throughout your home.

• Homeline 30 Amp two-pole circuit breaker
• Plug-In design, easy to install
• Compatible with Homeline load centers and CSED devices
• 120/240-Volt AC
• 10,000 AIR
• Limited lifetime warranty

The Square D by Schneider Electric QO 20 Amp One-Pole Circuit Breaker is intended for overload and short-circuit protection of your electrical system. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 AIR. All QO circuit breakers are equipped with the exclusive Visi-Trip indicator. When a QO Visi-Trip circuit breaker trips, the handle snaps to a midpoint position between in. OFF in. and in. ON in. and a highly visible, red indicator easily identifies the tripped breaker. This enables you to easily distinguish which breaker has tripped in a load center that may contain up to 42 different circuit breakers. QO circuit breakers have features no other manufacturer can offer. They come in many different sizes and can meet the needs of virtually every function in your home or business. These types of quality, industry exclusive products keep the Square D brand ahead of the competition and are builders' and electrical contractors' first choice in electrical protection.

• QO 20 Amp one-pole circuit breaker
• QO 20 Amp one-pole circuit breaker is designed for overload and over-current protection of your electrical system through its thermal-magnetic tripping mechanism
• Breaker offers a visi-trip indicator to let you easily identify which circuit is out in the load center
• Use for overload and over-current protection of your electrical system
• Thermal-magnetic tripping mechanism
• Compatible with QO load centers, CSED devices and NQOD panel boards
• 10,000 AIR
• 120/240 VAC
• ANSI certified and UL Listed

The Square D by Schneider Electric Homeline 50 Amp Two-Pole Circuit Breaker is used for overload and short-circuit protection of your electrical system. This breaker is compatible with Homeline load centers and CSED devices. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 AIR. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class. Homeline circuit breakers are the best in class. Designed exclusively for the residential market, Homeline products offer everything you need to distribute electricity throughout your home.

• Compatible with Square D Homeline load centers and CSED devices
• Plug-on design, easy to install
• 120/240-Volt AC
• 10,000 AIR
• Limited lifetime warranty

Eaton has enhanced its premium Type CH residential circuit breakers, making the best even better. In addition to the industry exclusive "Trip to OFF" and simple 1-Step Reset feature, Eaton has added a trip flag to visibly indicate breaker status. Along with Tri-Drive screws and new markings that highlight ratings and the Eaton brand.

• Primary function of a circuit breaker is to protect the wire from overheating (overload) and fault currents (short circuit)
• Amperage rating: 30 Amp
• Double pole breaker
• Flag visually confirms tripped status, making it easy for the homeowner to identify
• For use in type CH load centers only
• Interrupt rating - 10 kAIC
• Voltage rating is 120/240-Volt
• (1) #14-8, (2) #14-10 AWG Cu/Al 60 degree C or 75 degree C
• HACR rated

The Square D by Schneider Electric Homeline Single-Pole Tandem Circuit Breaker consists of (2) single-pole, 20 Amp breakers in 1 pole space. It is used for overload and short-circuit protection of your electrical system. This breaker is compatible with Homeline load centers and CSED devices. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 Air. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class. Homeline circuit breakers are the best in class. Designed exclusively for the residential market, Homeline products offer everything you need to distribute electricity throughout your home.

• Plug-on design, easy to install
• Compatible with Square D Homeline load centers and CSED devices
• 120/240-Volt AC
• 10,000 AIR
• Limited lifetime warranty

The Eaton Cutler-Hammer 20 Amp 1 in. Single-Pole Type BR Replacement Circuit Breaker is designed to protect house wires from overheating or causing a short-circuit. Single pole breaker applications include use with dishwashers, waste disposals, refrigerators, freezers, washing machines, televisions and window air conditioners. The UL-listed breaker is compatible with Westinghouse, Challenger and Bryant load centers and has a maximum load of 240-Volt.

• Primary function of a circuit breaker is to protect the wire from overheating (overload) and fault currents (short circuit)
• Amperage rating: 20 Amp
• Single pole 1 in. wide breaker
• Trips to center position - must turn off then turn back on
• For use in type BR load centers
• Type BR breakers are UL approved genuine replacement breakers for load centers made by Westinghouse, Challenger and Bryant
• Interrupt rating - 10 kAIC
• Voltage rating is 120/240-Volt
• Wire size - #14-4 AWG Cu/Al at 60 degree C or 75 degree C
• Gauge/number of wires with ground - 12/2

The Square D by Schneider Electric Homeline 40 Amp Two-Pole Circuit Breaker is used for overload and short-circuit protection of your electrical system. This breaker is compatible with Homeline load centers and CSED devices. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 AIR. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class. Homeline circuit breakers are the best in class. Designed exclusively for the residential market, Homeline products offer everything you need to distribute electricity throughout your home.

• Square D Homeline 40 Amp two-pole circuit breaker
• Plug-on design, easy to install
• Compatible with Square D Homeline breaker boxes and CSED devices
• This breaker needs 2 spaces in a breaker box for installation
• 120/240-Volt AC
• 10,000 AIR
• Limited lifetime warranty

The Eaton 10-Terminal Grounding Bar Kit is suitable for use with type BR load centers or type CH load centers. Ground bars are required in all panels (main service panels include ground and neutral). To be sure you are selecting the correct ground bar, divide the number of circuits in the panel by 2 and pick the closest numbered ground bar. For example, a 20 circuit panel would require a GBK10P. The kit includes a 10-terminal ground bar and one 2/0 lug.

• For use as a grounding bar in a load center
• Suitable for use with type BR load centers or type CH load centers
• 10 terminals
• One 2/0 lug