The Siemens Industry, Inc. EQ 125 Amp 8-Space 16-Circuit Indoor Main Lug Load Center has a flush-mount design and is NEMA 1R rated for indoor use. The load center is a single-phase, 3-wire unit with an aluminum buss bar for excellent conductivity. This load center is ANSI certified and UL listed with a rating of up to 240-Volt.

• Type-G90, hot-dipped galvanized carbon steel enclosure provides corrosion protection
• Aluminum bus bar
• Interiors offer removal in seconds
• 1-piece bus bar construction designed for use with circuit breakers
• Positive load side circuit breaker hook rails
• Ideal for sub-feed applications
• Flush mount
• 120/240 VAC

The Square D by Schneider Electric Homeline 200 Amp 30-Space 42-Circuit Outdoor Solar-Ready Combination Meter Socket and Main Breaker Load Center for Plug-on Neutral breakers is UL listed for residential and commercial power distribution. This combination service entrance device (CSED) is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers, including Plug-on Neutral. Homeline CSEDs are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline CSEDs are engineered for fast installation and wire savings.

• Square D Homeline 200 Amp 30-Space 42-Circuit Outdoor Ring-Type Semi-Flush Mount Solar-Ready Main Breaker Plug-On Neutral CSED
• Includes a fully distributed neutral bar, compatible with all Homeline breakers, including plug-on neutral combination arc fault and dual function breakers on any space
• Solar-ready for new or future installations with provisions for field-installed CT's on line bus
• Accepts solar ready sub-feed lug kit SR69064A for solar connections ahead of the main breaker (sold separately)
• Includes Factory-installed 200 Amp main breaker
• Bus bars rated 225 Amp maximum
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• 4 jaw ring type meter socket. Bypass type-none
• Semi-flush mount NEMA type 3R enclosure for outdoor installation
• Order tunnel kit SCTKP30 separately for overhead service applications
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Accommodates plug-on secondary surge arrestor, and features a plug-in design for easy installation
• Designed with straight-in mains to save expensive cable and time
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• UL listed, ANSI certified, and meets EUSERC specifications

The Square D Homeline 100 Amp 6-Space 12-Circuit Indoor Flush Mount Convertible Main Lugs Load Center is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline load centers are engineered for fast installation and wire savings.

• Includes flush mount cover without a door
• Accommodates plug-on secondary surge arrestor (sold separately)
• Overhead/underground feed simply by rotating the device before installing
• Single phase
• Rated 120/240 VAC and 10,000 AIR short circuit current rating
• Flush mount device cover without a door
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• 3-ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

Eaton's Cutler-Hammer Type CH Load centers (also known as a breaker box) include a 1-piece copper bus. This absence of bolted connections virtually eliminates the chance of hot spots or faults, ensuring a longer product life. Our standard 14-3/8 in. W enclosures fit snugly between wall studs. A variety of knockouts allows for more wiring configurations, while predrilled mounting holes provide easy installation of additional ground bars, if desired. Type CH Load centers have a lifetime warranty and accept Cutler-Hammer Type CH (3/4 in.) breakers.

• 42-space
• 200 Amp
• Cover included
• Lifetime warranty

The Square D by Schneider Electric QO 200 Amp Outdoor Circuit Breaker Enclosure includes a two-pole QOM2 frame sizes circuit breakers 100-225 amp capacity for use as an exterior disconnect. This breaker box is suitable for use as service entrance equipment for compliance up to 2017 NEC code, and is rated Type-3R for outdoor use. This enclosure accepts a B-Hub for top feed applications (sold separately). For non-service entrance equipment applications, ground bar PKOGTA-2 is included.

• Square D QOM2 200 Amp outdoor circuit breaker enclosure with QOM2200VH circuit breaker included
• Includes a PKOGTA-2 ground bar kit, B-hubs not included
• Not for use with single-pole QO breakers
• Includes (1) Square D QOM2200VH 200 Amp circuit breaker, 22 kA interruption rating
• Type-3R enclosure for outdoor use
• 1-phase, 200 Amp, 120/240-Volt AC rated
• 2-1/2 in. maximum B-type hub on the top and a 2 in. maximum knockout on the bottom
• Surface mountable for easy installation
• ANSI certified and UL Listed
• For installation as entrance device to comply with code up to 2017 NEC Code

Designed to meet the demands for temporary power at recreational vehicle parks. Recreational vehicle parks use power outlet panels on a permanent basis as a power source for the RV's distribution system. A wide variety of configurations are available to address almost any application. Design options include surface (pole mount) and pedestal mount construction, with or without meter socket provisions, and top or bottom feed.

• Includes a 20 Amp, 30 Amp, and 50 Amp Receptacle
• Equipment is unmetered, surface mounted
• Powder coated with the highest quality finish and fabricated with G90 galvanized steel
• Elevated cover with padlock prevents unauthorized use
• Receptacles protected by Siemens circuit breakers
• NEMA type 3R: enclosure is intended for outdoor use primarily to provide a of protection against falling rain and sleet and must remain undamaged by the formation or ice on the enclosure; they are not intended to provide protection against conditions such as dust, internal condensation or internal icing
• ANSI certified and UL-listed

The Square D by Schneider Electric Homeline Value Pack 200 Amp 30-Space 60-Circuit Indoor Convertible Main Breaker Qwik-Grip Load Center for Plug-on Neutral breakers includes the cover and a selection of breakers. It is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 200 Amp 30-Space 60-Circuit Indoor Main Breaker Qwik-Grip Plug-On Neutral Load Center with Cover - Value Pack
• Innovative cable entry system quickly grips the branch wires while eliminating steel KO's and cable connectors for a faster installation
• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers on any space
• Each pole space accepts full-size, tandem or quad breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes (3) HOM120 Homeline 20 Amp single-pole circuit breakers, (2) HOM230 Homeline 30 Amp double-pole circuit breakers and a combination flush/surface cover
• Accommodates plug-on secondary surge arrestor (sold separately)
• Overhead/underground feed simply by rotating the device before installing
• Single phase, NEMA 1 rating for indoor use
• Rated 120/240 VAC and 22,000 air short circuit current rating
• Automatic flush adjusting cover requires less time to complete the job
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed

The Square D Electric Homeline Value Pack 100 Amp 20-Space 40-Circuit Indoor Convertible Main Breaker Load Center provides safety and value to contractors, remodelers or homeowners. It's built with a plated, aluminum bus bar that's compatible with Square D Homeline circuit breakers. These breaker boxes are designed for fast installation and wire savings. This breaker is fully distributed and UL listed for residential and commercial power distribution.

• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers on any space
• Each pole space is compatible with a Square D Homeline full-size, tandem or quad breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes (2) HOM120 Homeline 20 Amp single-pole circuit breakers, (1) HOM230 Homeline 30 Amp double-pole circuit breakers and a combination flush/surface cover
• Accommodates plug-on secondary surge arrestor (sold separately)
• Overhead/underground feed simply by rotating the device before installing
• Single phase, Indoor Main Breaker Homeline Breaker Box
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Automatic flush adjusting cover requires less time to complete the job
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offers up to 50% more terminals than UL requires, increases wiring flexibility, saves installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 3-ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

The Square D Homeline pack includes a 50 Amp Homeline Outdoor Metallic Load Center and an installed Square D Homeline breaker - HOM250GFI. Along with many other features and benefits, the Square D HOM250GFI 2-Pole Ground Fault Circuit (GFCI) Breaker protects single pole and 2 pole loads against ground and overcurrent faults. The load center and GFCI breaker provide protection for outdoor circuits such as hot tubs, fountains, swimming pools or spas.

• Homeline hot tub/pool/spa pack provides protection for outdoor circuits such as hot tub, fountains, swimming pools or spas
• Includes: HOM250GFI- 50 Amp 2-pole Homeline ground fault circuit interrupter installed in (HOM2-4L50R) - 50 Amp outdoor load center
• Painted, zinc-coated steel outdoor enclosure
• Cover can be padlocked
• Main lug load center designed for applications up to 50 Amp 120/240 VAC
• 3.0/7.5 HP 240 VAC 3 phase (standard/maximum) or corner grounded delta system refer to data bulletin 2700DB0202

EQ type load centers with main lugs feature a combination trim box in one package. Spa Panels are ideal for outdoor applications requiring the use of ground fault protection, such as hot tubs. A factory installed 2-Pole GFCI breaker is provided, along with 2 extra circuits.

• Factory installed Siemens 2-pole 50 Amp GFCI circuit breaker (QF250P)
• 2 extra spaces for branch circuits
• Interiors offer removal in seconds
• Single phase
• 1 piece bus bar construction designed for use only with circuit breakers
• UL listed on 60/75C conductors
• Positive load side circuit breaker hook rails
• Factory installed 5 position ground bar
• Uses HS type hubs
• NEMA type 3R: enclosure is intended for outdoor use primarily to provide a degree of protection against falling rain and sleet and must remain undamaged by the formation or ice on the enclosure; they are not intended to provide protection against conditions such as dust, internal condensation, or internal icing

Specially designed for easy installation, Eaton's CH load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The CH8L125RP is a 125 Amp outdoor main lug with 8 spaces and 8 circuits.

• Amperage rating: 125
• Bus material: copper
• Rated NEMA 3R for outdoor use
• Feed type: overhead
• Number of circuits: 16
• Number of spaces: 8
• Phase: single-phase
• Voltage rating: 120/240
• Wire size: #6-1/0
• Tangential center knockout easier installation for conduit applications
• Steel back pan provides solid and reliable breaker mounting single piece design for stability and durability
• Single keyhole mounting - 1 keyhole at the top provides easier mounting and leveling
• Drywall marking on enclosure - indicates proper mounting depth for flush applications
• Used with: type CH breakers

Specially designed for easy installation, Eaton's CH plug on neutral load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The CHP22N125X2 is an indoor 125 Amp convertible main panel with 22 spaces and 22 circuits.

• Amperage rating: 125 Amp
• Bus material: copper
• Rated NEMA 1 for indoor use
• Main breaker interrupt rating: 10 kAIC

The Square D Homeline 100 Amp 6-Space 12-Circuit Indoor Surface Mount Convertible Main Lugs Load Center is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Compact and Efficient Design: Square D Homeline 100 Amp 6-Space 12-Circuit Indoor Surface Mount Main Lug Load Center is perfect for indoor electrical applications
• Surface Mount Cover Included: Comes with a durable surface mount cover for added convenience and protection
• Supports Surge Protection: Compatible with plug-on secondary surge arrestors (sold separately) to enhance electrical safety
• Flexible Wiring Options: Features knockouts on all sides of the breaker box for hassle-free wire installation
• Single-Phase, Indoor Use: Designed for single-phase indoor installations, rated 120/240 VAC with a 10,000 AIR short circuit current rating
• Rated 120/240 VAC and 10,000 AIR short circuit current rating
• Open Cover Design: Surface mount cover without a door provides easy access to circuit breakers
• Rugged Construction: Thermoplastic interior assembly ensures industry-leading durability for long-term use
• User-Friendly Installation: Slot/square drive screws accommodate both flat blade and square-head screwdrivers for secure and efficient installation

The Square D Homeline 100 Amp 20-Space 40-Circuit Outdoor Convertible Main Breaker Load Center for Plug-on Neutral breakers is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline load centers are engineered for fast installation and wire savings.

• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers on any space
• Each pole space accepts full-size, tandem or quad breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes a rainproof outdoor cover
• Accommodates plug-on secondary surge arrestor (sold separately)
• Main feeders terminate from the top, feeders can enter from any direction, however, device cannot be rotated
• Single phase
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Rainproof cover features a stainless steel hasp that is easily padlocked for safety from theft
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 3 ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

The Eaton Cutler-Hammer Type-BR Circuit Breaker Filler Plates allows you to cover unused spaces in a load center. This ensures that the live space is closed off. It is UL safety listed.

• Covers unused spaces in a load center
• For use with cutler-hammer type-BR load centers
• 1 in. plate for branch breaker slots
• UL listings

The Square D Electric Homeline Value Pack 200 Amp 30-Space 60-Circuit Indoor Convertible Main Breaker Load Center provides safety and value to contractors, remodelers or homeowners. It's built with a plated, aluminum bus bar that's compatible with Square D Homeline circuit breakers. These breaker boxes are designed for fast installation and wire savings. This breaker is fully distributed and UL listed for residential and commercial power distribution.

• Plug-On Neutral Design: Features a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers in any space
• Wide Breaker Compatibility: Each pole space supports Square D Homeline full-size, tandem, or quad breakers, offering flexibility for your electrical setup
• Ground and Neutral Bar Capacity: Accepts up to (3) #10-14 equipment grounds for enhanced wiring versatility
• Value Pack Components: Includes (3) HOM120 Homeline 20 Amp single-pole circuit breakers, (2) HOM230 Homeline 30 Amp double-pole circuit breakers, and a combination flush/surface cover
• Supports Surge Protection: Accommodates a plug-on secondary surge arrestor (sold separately) for added electrical safety
• Overhead or Underground Feed: Install easily by rotating the device to match your feed type
• Single-Phase Indoor Main Breaker Panel: Designed for 120/240 VAC systems with a 22,000 AIR short circuit current rating
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Automatic Flush Adjusting Cover: Reduces installation time with an easy-to-use, adjustable cover
• Straight-In Mains Design: Saves on expensive cable and reduces installation time
• Enhanced Wiring Flexibility: Distributed split branch neutral includes terminal screws backed out, offering up to 50% more terminals than UL standards require
• Rugged Thermoplastic Interior: Built with durable materials to withstand heavy use
• User-Friendly Screws: Slot/square drive screws allow for standard flat blade or square-head screwdrivers, ensuring proper torque
• Removable Interior for Security: Protects from damage or theft on the job site with a single captive screw for easy removal
• Customizable Ground Bar Locations: Three ground bar mounting locations (left, right, and end) for easy wiring access

These 1 in. Load-Center Filler Plates (5-Pack) are used to fill empty spaces in a load center after the circuit breakers have been removed. The plates are ANSI certified. The plates are CSA and UL Listed.

• Use to fill empty circuit-breaker positions
• Compatible with a 1 in. load center space
• Bag contains 5 filler plates
• ANSI certified and CSA and UL Listed

The Square D by Schneider Electric Homeline Value Pack 100 Amp 20-Space 40-Circuit Indoor Convertible Main Breaker Qwik-Grip Load Center for Plug-on Neutral breakers includes the cover, a selection of breakers and is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 100 Amp 20-Space 40-Circuit Indoor Main Breaker Qwik-Grip Plug-On Neutral Load Center with Cover - Value Pack
• Innovative Qwik-Grip System: Features a revolutionary cable entry system that grips branch wires securely while eliminating steel knockouts and cable connectors for faster and easier installation
• Fully Distributed Neutral Bar: Designed for seamless installation of Homeline plug-on neutral combination arc fault circuit breakers on any space
• Flexible Breaker Compatibility: Each pole space supports full-size, tandem, or quad Homeline breakers, offering versatile circuit management
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Comprehensive Value Pack: Includes (2) HOM120 20 Amp single-pole circuit breakers, (1) HOM230 30 Amp double-pole circuit breaker, and a combination flush/surface cover for added convenience
• Surge Protection Ready: Compatible with plug-on secondary surge arrestors (sold separately) for enhanced electrical safety
• Overhead/Underground Feed Options: Easily switch between overhead or underground feed by rotating the device during installation
• Single-Phase Breaker Box: Built for single-phase indoor applications
• High Electrical Rating: Rated 120/240 VAC with a 22,000 AIR short circuit current rating for reliable performance
• Time-Saving Features: Includes an automatic flush-adjusting cover and straight-in mains design to reduce installation time and save on cable costs
• Designed with straight-in mains to save expensive cable and time
• Enhanced Wiring Flexibility: Distributed split branch neutral offers up to 50% more terminals than UL requirements, simplifying wiring and increasing flexibility
• Durable and Rugged Design: Constructed with a thermoplastic interior assembly for long-lasting durability
• Convenient Fasteners: Slot/square drive screws allow the use of either a flat-blade or square-head screwdriver for secure fastening and proper torque
• Secure and Theft-Resistant: Interior components can be easily removed with a single captive screw, protecting them from damage or theft on job sites
• Versatile Ground Bar Mounting: Includes three ground bar mounting locations (left, right, and end) for optimal wiring convenience

Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor.

• Features Siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• SN series plug-on neutral load center includes 1 factory installed ground bars
• Single phase load center
• Aluminum bus
• NEMA type 1 enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

The Square D Homeline Value Pack is a 125 Amp 12-Space 24-Circuit Indoor Convertible Main Lugs Load Center with cover for Plug-on Neutral breakers includes a selection of breakers and a ground bar. It is UL listed for residential and commercial power distribution. This load center includes (2) 20 Amp single-pole breakers, built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Homeline 125 Amp 12-Space 24-Circuit Indoor Load Center: Includes a cover, ground bar, and Plug-On Neutral design, ideal for residential or light commercial applications
• Plug-On Neutral Ready: Features a fully distributed neutral bar for easy installation of Homeline plug-on neutral combination arc fault breakers
• Breaker Compatibility: Each pole space supports full-size, tandem, or quad breakers, providing maximum flexibility for your electrical setup
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Complete Value Pack: Includes a PK15GTAL ground bar, (2) HOM120 Homeline 20 Amp single-pole breakers, and a combination flush/surface cover for versatile installations
• Supports Surge Protection: Accommodates an optional plug-on secondary surge arrestor (sold separately) for enhanced safety
• Flexible Feed Options: Designed for overhead or underground feed by rotating the device during installation
• Durable Single-Phase Panel: Rated for 120/240 VAC with a 65,000 AIR short circuit current rating for indoor installation
• Rated 120/240 VAC and 65,000 AIR short circuit current rating
• Time-Saving Design: The automatic flush adjusting cover and straight-in mains simplify installation, reducing cable costs and labor time
• Designed with straight-in mains to save expensive cable and time
• Enhanced Wiring Flexibility: Distributed split branch neutral with terminal screws backed out provides up to 50% more terminals than UL standards require
• Rugged Construction: Thermoplastic interior assembly is among the most durable in the industry, ensuring long-lasting performance
• User-Friendly Screws: Slot/square drive screws support standard flat blade or square-head screwdrivers for secure and accurate torque
• Job Site Protection: Interiors can be easily removed with a single captive screw to prevent damage or theft
• Customizable Ground Bar Locations: Includes 1 equipment ground bar, factory-mounted for field placement in three locations (left, right, or end), making wiring easier and more efficient