The Southwire 500 ft. Brown 18/2 Thermostat and Bell Cable is rated to 150-Volt and is classified as class-2 power-limited circuit cable. This thermostat and bell cable offers solid copper conductors with PVC insulation. This thermostat wire is also sunlight resistant.

• For use in heating and air conditioning controls
• Rated -20 degree C to 60 degree C
• Used in bell and alarm systems
• UL Listed
• Flat design

Type NM-B (non-metallic-sheathed cable) may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90 degree C (with ampacity limited to that for 60 degree C conductors) as specified in the NEC 1. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not subject to excessive moisture or dampness. Voltage rating for NM-B cable is 600-Volt.

• Copper conductors are annealed (soft) copper and UL Listed
• Cable is available in a variety of colors, lengths and gauges
• Run in air voids of masonry block and tile walls
• Unique (SlikQuik infused membrane) jacket construction allows for 50% reduction in pulling force resulting in easier installation
• 12-Gauge
• NM-B has 2, 3 and 4-conductors and available with 2 neutrals, construction designed for easier pulling

The Romex Type NM-B Copper Building Wire comes with a patented SIMpull Cable Jacket that significantly simplifies the process of pulling, stripping, and installation. This cable is a familiar choice in residential building wiring, frequently serving as a reliable branch circuit to power switches and outlets. Designed exclusively for above-ground installation in dry settings, it confidently carries a 600-volt voltage rating, emphasizing its durability and performance. Notably adaptable, the NM-B cable can be seamlessly routed through air voids within masonry block or tile walls, as long as these surfaces remain unaffected by moisture. Proudly displaying the Made in America label, this cable effortlessly blends innovation with a commitment to quality craftsmanship.

• NM-B has 2-conductors, 3-conductors and 4-conductors and available with 2-neutrals, construction designed for easier pulling
• Copper conductors are annealed (soft) copper, UL Listed
• Cable is available in a variety of colors, lengths and gauges
• Unique (SlikQuik infused membrane) jacket construction allows for 50% reduction in pulling force resulting in easier installation

Southwire Ultratite Liquidtite Flexible Non-Metallic PVC Conduit, 1/2" X 100'. Southwire 1/2 In. X 100 Ft. Ultratite Liquidtight Flexible Non-Metallic Pvc Conduit. Brand Received (Cerrowire Or Southwire) Varies By Zip Code. Suitable For The Installation And Protection Of Electrical Conductors In Circuits Of 600-Volt Nominal Or Less. Flexible, Rigid PVC Construction For Crush Resistance. Liquid-Tight Design Protects Against Vapors, Solids And The Weather For Use In Applications Requiring Movement, Crossover Connections Or Tight Bends. Accommodates Use In Motor Circuit Applications As Raceways For Motor Feeders, Branch And Control Circuits. Use For Conductors Of Motor Feeders, Branch And Control Circuits. UL And CSA Safety Listings. Mfg #55094201. Mfg #55094201

• Southwire 1/2 In. X 100 Ft. Ultratite Liquidtight Flexible Non-Metallic Pvc Conduit
• Brand Received (Cerrowire Or Southwire) Varies By Zip Code
• Suitable For The Installation And Protection Of Electrical Conductors In Circuits Of 600-Volt Nominal Or Less
• Flexible, Rigid PVC Construction For Crush Resistance

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• THHN copper conductors are annealed (soft) copper, rated at 600-Volt and heat, moisture, gasoline, and oil resistant, UL Listed
• THHN cable is insulated with a tough heat and moisture resistant polyvinyl chloride (PVC)
• THHN is available in a variety of colors, lengths and gauges, also available in solid and stranded copper
• THHN cable is suitable for use in wet or dry locations at temperatures not to exceed 90 degree C

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings
• Made with annealed (soft) copper, compressed stranded
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon
• THHN is rated for 600-Volt
• UL Listed and CSA certified

Southwire Ultratite Liquidtite Flexible Non-Metallic PVC Conduit, 3/4" X 100'. Southwire 3/4 In. X 100 Ft. Ultratite Liquidtight Flexible Non-Metallic Pvc Conduit. Brand Received (Cerrowire Or Southwire) Varies By Zip Code. Suitable For The Installation And Protection Of Electrical Conductors In Circuits Of 600-Volt Nominal Or Less. Flexible, Rigid PVC Construction For Crush Resistance. Liquid-Tight Design Protects Against Vapors, Solids And The Weather For Use In Applications Requiring Movement, Crossover Connections Or Tight Bends. Accommodates Use In Motor Circuit Applications As Raceways For Motor Feeders, Branch And Control Circuits. Use For Conductors Of Motor Feeders, Branch And Control Circuits. UL And CSA Safety Listings. Mfg #55094301. Mfg #55094301

• Southwire 3/4 In. X 100 Ft. Ultratite Liquidtight Flexible Non-Metallic Pvc Conduit
• Brand Received (Cerrowire Or Southwire) Varies By Zip Code
• Suitable For The Installation And Protection Of Electrical Conductors In Circuits Of 600-Volt Nominal Or Less
• Flexible, Rigid PVC Construction For Crush Resistance

The Southwire 250 ft. 18/8 thermostat wire features inner conductor material encased in a brown PVC jacket. The solid wire is designed for use in interior residential applications such as thermostats. Thermostat wire is a class 2 power-limited circuit cable.

• Solid copper conductors with 6 mils of polypropylene insulation, conductors are paralleled and covered
• Rated 150-Volt
• Sunlight resistant from -20 degree C to +60 degree C
• UL listed, GreenSpec and RoHS compliant

Southwire's THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwire's THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings
• Made with annealed (soft) copper, compressed stranded
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon
• THHN is rated for 600-Volt
• UL Listed and CSA certified

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings
• Conductors are annealed (soft) copper, rated at 600-Volt and heat, moisture, gasoline and oil resistant
• Insulated with tough, heat and moisture-resistant PVC
• Use in wet or dry locations at temperatures not to exceed 194 degree F (90 degree C) or not to exceed 167 degree F (75 degree C) when exposed to oil or coolant

The Romex Type NM-B Copper Building Wire boasts a patented SIMpull Cable Jacket, designed to facilitate effortless pulling, stripping, and installation procedures. Widely utilized in residential building wiring, this cable serves as a reliable branch circuit, effectively powering switches and outlets. Its installation is meticulously suited for above-ground use within dry environments, and it confidently carries a 600-volt voltage rating, underscoring its durability. Notably versatile, the NM-B cable can be seamlessly threaded through air voids within masonry block or tile walls, granted these surfaces remain free from moisture. Proudly carrying the Made in America label, this cable seamlessly integrates cutting-edge innovation with a dedication to quality craftsmanship.

• Brand received (Cerrowire or Southwire) varies by zip code
• For exposed and concealed applications
• Type NM-B cable (non-metallic sheathed cable) can be used in residential wiring as branch circuits for outlets, switches or other loads
• For indoor use
• For dry locations up to 90 degree C or 194 degree F as specified in the NEC 1
• 600-Volt maximum
• 1,000 ft. of cable
• Nylon jackets help significantly reduce pulling force resulting in easier installation
• Copper conductors

Southwire 14/3 Solid Romex SIM Pull CU NM-B With G Wire, Blue, 250 ft. Southwire 14-3 Nm Blue W/g 250 Ft. 250'. 14/3 Gauge. Blue. Solid Core Copper Wire, Nonmetallic Sheathed Cable. 600V. 15 Amps. Wire Diameter: 0.06. Mfg # 63946955. Mfg #63946955

• Southwire 14-3 Nm Blue W/g 250 Ft
• 250'
• 14/3 Gauge
• Blue

The Southwire 500 ft. Brown 18-5 Thermostat and Bell Cable is designed for use in heating and air conditioning controls as well as in alarm systems. This cable offers a flat design. The insulation is made of 6 mils of polypropylene and a brown PVC jacket.

• UL listed
• Designated as class-2 power-limited circuit cable
• Rated at 150-Volt
• Solid copper conductors

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings
• Made with annealed (soft) copper, compressed stranded
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon
• THHN is rated for 600-Volt
• Thermal-magnetic

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings
• Made with annealed (soft) copper, compressed stranded
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon
• THHN is rated for 600-Volt
• UL Listed and CSA certified

The Romex Type NM-B Copper Building Wire stands out with its patented SIMpull Cable Jacket, ensuring a smoother pulling, stripping, and installation process. Primarily designed for residential building wiring, it excels as a branch circuit for switches and outlets. This cable finds its niche above ground and in dry settings, boasting a voltage rating of 600-volts. Notably versatile, it can also be routed through air voids within masonry block or tile walls, provided they aren't wet or damp. Proudly manufactured in the USA, this cable combines innovation and reliability for a range of electrical applications.

• Brand received (Cerrowire or Southwire) varies by zip code
• Placed where space is available and free of excess moisture and dampness
• May be used for both exposed and concealed work in normally dry locations
• May be run in air voids of masonry block or tile walls not subject to excessive moisture
• Conductors are annealed (soft) copper
• UL Listed and CSA certified

Southwire company 250 ft. 18/6-Gauge thermostat wire is made of solid, copper conductors that feature a 6-mil thick brown, PVC jacket. This wire is flame retardant and UL listed. Can be used in temperatures up to 140 degree F.

• Indoor and outdoor use
• Heating and air conditioning controls
• 2-conductor cable is flat and multi-conductor cables are round
• Sunlight resistant from -20 degree C up to 60 degree C

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings
• Conductors are annealed (soft) copper, rated at 600-Volt and heat, moisture, gasoline and oil resistant
• Insulated with tough, heat and moisture-resistant PVC
• Use in wet or dry locations at temperatures not to exceed 194 degree F (90 degree C) or not to exceed 167 degree F (75 degree C) when exposed to oil or coolant
• White color

The Southwire 500 ft. Brown 18/3 Thermostat and Bell Cable is designed for use in heating and air conditioning controls as well as in alarm systems. This cable offers a flat design. The insulation is made of 6 mils of polypropylene and a brown PVC jacket.

• UL Listed and CSA certified
• Designated as class-2 power-limited circuit cable
• Rated at 150-Volt
• Solid copper conductors

The Romex Type NM-B Copper Building Wire is thoughtfully designed to enhance installation convenience with its patented SIMpull Cable Jacket, facilitating smoother pulling, stripping, and overall setup. Widely embraced in residential building wiring, this cable plays a pivotal role as a dependable branch circuit, serving switches and outlets effectively. Engineered exclusively for above-ground installation within dry environments, the cable proudly carries a substantial voltage rating of 600 volts, ensuring robust performance. Its adaptability shines through as the NM-B cable finds its way into air voids within masonry block or tile walls, granted that these surfaces remain free from moisture-a testament to its versatility. With a patriotic origin, being "Made in America," this cable seamlessly marries technological innovation with top-notch craftsmanship.

• Brand received (Cerrowire or Southwire) varies by zip code
• Placed where space is available and free of excess moisture and dampness
• May be used for both exposed and concealed work in normally dry locations
• UL Listed and CSA certified
• Conductors are annealed (soft) copper
• Conductors are annealed soft copper

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• THHN copper conductors are annealed (soft) copper, rated at 600-Volt and heat, moisture, gasoline and oil resistant, UL Listed
• THHN cable is insulated with a tough heat and moisture resistant polyvinyl chloride (PVC)
• THHN is available in a variety of colors, lengths and gauges; also available in solid and stranded copper
• THHN cable is suitable for use in wet or dry locations at temperatures not to exceed 90 degree C

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• THHN copper conductors are annealed (soft) copper, rated at 600-Volt and heat, moisture, gasoline and oil resistant, UL Listed
• THHN cable is insulated with a tough heat and moisture resistant polyvinyl chloride (PVC)
• THHN is available in a variety of colors, lengths and gauges; also available in solid and stranded copper
• THHN cable is suitable for use in wet or dry locations at temperatures not to exceed 90 degree C

Southwires THHN and THWN is a multi-purpose building wire used in conduit and cable trays for service, feeders and branch circuits in commercial and industrial applications. It is also used as a conductor in NM-B, UF-B, SER, SEU and MC. Southwires THHN is rated for 600-Volt and has a heat capacity of up to 90 degree C.

• Can be used in wet or dry locations
• Made with annealed (soft) copper, compressed stranded
• Insulation is high heat and moisture resistant polyvinyl chloride (PVC)
• Jacket is abrasion, moisture, gasoline and oil resistant nylon
• THHN is rated for 600-Volt
• UL Listed and CSA certified

The Romex Type NM-B Copper Building Wire, featuring a patented SIMpull Cable Jacket, offers a hassle-free experience during installation, pulling, and stripping. Primarily intended for residential building wiring, it serves as an efficient branch circuit for switches and outlets. Suitable for above-ground installation in dry areas, this cable boasts a voltage rating of 600-volts, ensuring reliable performance. It's noteworthy that NM-B cable can be routed through air voids within masonry block or tile walls, as long as these walls remain free from wetness or dampness. Proudly crafted in the United States, it exemplifies quality and innovation in wiring solutions.

• Brand received (Cerrowire or Southwire) varies by zip code
• For exposed and concealed applications
• Type NM-B cable (non-metallic sheathed cable) can be used in residential wiring as branch circuits for outlets, switches, or other loads
• May be run in air voids of masonry block or tile walls that are not subjected to excessive moisture or dampness
• For indoor use
• For dry locations up to 90 degree C or 194 degree F as specified in the NEC 1
• 600-Volt maximum
• 125 ft. of cable
• Nylon jackets help significantly reduce pulling forced resulting in easier installation
• Copper conductors