Electrical
With performance that lasts as long as the leading national brands, the HDX Ultra Alkaline Battery is the ultimate power solution. And, with power storage that lasts up to 10 years and a stainless steel cover prevents leaks and reduces rust corrosion. This is a battery you know you can trust to last.
- Confidently power everything from toys to flashlights, portable power tools and much more
- HDX batteries are guaranteed to hold power for up to 10 years in storage
- Available in AA, AAA, C, D, 9V variety and varying pack sizes
- Reusable packaging makes it easy to store and save for future use
- Comes in an economical 100-pack for a great value
- Zinc Alloy
- 3/8" Greenfield (Flex)
- 14/2,12/3 Bx
- For Armored Cable and Flexible Steel Conduit (Greenfield)
- Made Of Die-Cast Zinc
- Use Without Locknut
- Protects Wire
- For Rigid Conduit
HUBBELL WIRING Device-Kellems wall plates bring an unparalleled combination of features, benefits and advantages. They are elegant enough for the home and tough enough to withstand the most rigorous environments. Bryant nylon wall plates are designed for durability and easy cleaning. Standard sized wall plates are 1/8 in. larger to give you that extra coverage to hide rough box openings. The depth is 1/4 in. so that it will comfortably fit over the device even on imperfect installations or on retrofit work.
- Nylon wall plate is virtually unbreakable
- Smooth finish is easy to clean
- Mounting screws included, brass, painted slotted screw head
- Captive mounting screw hole, screw won't fall out of plate
For Non-Metallic Cable
- Twin Screw
- For Indoor Use Only
- Use In Dry Location To Connect Non-Metallic Cable To Metal Enclosures
Arlington's Snap2It Zero to 90 degree Non-Metallic Connector for use this liquid-tight conduit, type B only. Easy to install with push on installation. It is produced from UV rated plastic for long outdoor life.
- Adjusts for all angles 0 degree -90 degree
- To adjust the angle simply loosen the center nut, twist to the correct angle and retighten
- Knockout size: 3/4 in.
- Trade size: 3/4 in.
- Use To Cover Exposed Holes In Steel Outlet Boxes and Other Metal Enclosures
- Indoor Use Only
- 10 Per Bag
Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short-circuit and overload protection. The overload element provides protection against low level overcurrent of overloads and will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. Simplifies and improves blackout prevention (selective coordination). Helps protect motors against burnout from single phasing on three phase systems.
- 60 Amp
- 250-Volt
- UL Listed
- Blackout prevention
- Size 0 Fits 14/2,14/3,12/2, Ac and Mc
HUBBELL WIRING Device-Kellems wall plates bring an unparalleled combination of features, benefits and advantages. They are elegant enough for the home and tough enough to withstand the most rigorous environments. Bryant nylon wallplates are designed for durability and easy cleaning. Standard sized wallplates are 1/8 in. larger to give you that extra coverage to hide rough box openings. The depth is 1/4 in. so that it will comfortably fit over the device even on imperfect installations or on retrofit work.
- Nylon wall plate is virtually unbreakable
- Smooth finish is easy to clean
- Mounting screws included, brass, painted slotted screw head
- Captive mounting screw hole, screw won't fall out of plate
This time-delay cartridge fuse has an advanced protection energy-efficient Class RK5 dual element. This limits the current on the time-delay fuse with optional open fuse indication on select ratings. The time-delay is 10-seconds (minimum) at 500% of rated current (8-seconds for 1 10-30 Amp sizes).
- Provides motor overload, ground fault and short-circuit protection
- Helps protect motors against burnout from overloads
- Helps protect motors from burnouts from single-phasing on 3-phase systems
- Simplifies and improves blackout prevention (selective coordination)
- Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short-circuit and overload protection
- Overload element provides protection against low level overcurrent of overloads and holds an overload which is 5-times greater than the ampere rating of the fuse for a minimum of ten seconds
- CE, UL Listed, standard 248-12, Class RK-5, Guide JDDZ, File E4273
- CSA Certified, C22.2 No. 248.12, Class 1422-02, file 53787
Allied Tube & Conduit schedule 40 conduit is used for your electrical wiring needs. PVC Conduit provides non-metallic protection for your cables and conductors that provides good insulation without power loss or conductor heating. Allied Tube & Conduit is PVC Conduit is sunlight, corrosion, and fire resistant.
TAYMAC wall plates are used in home, commercial or industrial settings for enhance durability and appearance. Metal wall plates have a beauty, weight and feel that plastic cannot replicate. Includes screws in matching finish.
- Easily primed and painted to match or complement walls
- Solid sound compared to thin, hollow resonance of economy plastic wall plates
- Durable, won't crack, peel or discolor over time
- Won't bow, crack or distort during installation
- Premium powder coat
Arlington's Screw 90 degree non-metallic connector. It is used with non-metallic liquid-tight conduit, type B only. It is produced from UV rated plastic for long outdoor life.
- Conduit threads onto ferrule and up inside the outer body, inside taper squeezes down on the outside of conduit for a superior liquid tight seal
- To install simply screw onto the conduit until it stops
- Fitting is not in alignment with knock-out you may unscrew the fitting up to 1 full turn for adjustment
- Also for use with flexible non-metallic tubing
- Trade size: 3/4 in.
- Knockout size: 3/4 in.
- Dimensions: 2.489 in. x 0.545 in. x 2.872 in.
With performance that lasts as long as the leading national brands, the HDX Ultra Alkaline Battery is the ultimate power solution. And, with power storage that lasts up to 10 years and a stainless steel cover prevents leaks and reduces rust corrosion. This is a battery you know you can trust to last.
- Confidently power everything from toys to flashlights, portable power tools and much more
- HDX batteries are guaranteed to hold power for up to 10 years in storage
- Available in AA, AAA, C, D, 9V variety and varying pack sizes
- Reusable packaging makes it easy to store and save for future use
- Comes in an economical 12-pack for a great value
Arlington's smallest insulated bushing. They protect cables from abrasion by the conduit. Often conduit is used to protect cables where damage could occur in a house or building.
- Press fit
- Holds firmly in place while pulling cables
- Some examples of use: cable tv, computer datelines, telephone/modem
- Trade size: 1/2 in.
- Dimensions: .531 in. x .84 in.
Leviton offers a large selection of 15, 20, 30 and 50 Amp Commercial Grade Straight Blade Plugs and Connectors, available in a wide variety of features. These rugged performers are moisture, chemical and abuse-resistant. And they're ideal for indoor and outdoor use. Our EPTR rubber-backed plugs and connectors stand up to rough use, protecting against dirt and moisture. The deep-slotted, backed-out terminal screws draw back wire clamps securely over stripped leads for maximum conductivity.
- Thermoplastic material
- Residential use
- Black
- UL and CSA listed
HUBBELL WIRING Device-Kellems wall plates bring an unparalleled combination of features, benefits and advantages. They are elegant enough for the home and tough enough to withstand the most rigorous environments. Bryant nylon wallplates are designed for durability and easy cleaning. Standard sized wallplates are 1/8 in. larger to give you that extra coverage to hide rough box openings. The depth is 1/4 in. so that it will comfortably fit over the device even on imperfect installations or on retrofit work.
- Nylon wall plate is virtually unbreakable
- Smooth finish is easy to clean
- Mounting screws included, brass, painted slotted screw head
- Captive mounting screw hole, screw won't fall out of plate
Specially designed for easy installation, Eaton's BR load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The BR48L125SP is a 125 Amp main lug with 4-spaces and 8-circuits.
- Amperage rating: 125 Amp
- Bus material: aluminum
- Rated NEMA 1 for indoor use
- Interrupt rating: 10 kAIC
- Mounting: surface
- Number of circuits: 8
- Number of spaces: 4
- Phase: single-phase
- Voltage rating: 120/240-Volt
- Wire size: #14-1/0 AWG Cu/Al at 60 degree C or 75 degree C
- Tangential center knockout easier installation for conduit applications
- Steel back pan provides solid and reliable breaker mounting single piece design for stability and durability
- Single keyhole mounting - provides easier mounting and leveling
- Drywall marking on enclosure - indicates proper mounting depth for flush applications
- Used with: type BR breakers
Built of durable thermoplastic, Leviton range and dryer power outlets; in flush mount, surface mount and panel mount versions; come equipped with heavy-gauge, double-wire copper alloy contacts. To ensure correct and speedy wiring, terminals have ID markings. Flush-mount devices fit single or 2-Gang outlet boxes.
- Made of durable thermoplastic
- Heavy-gauge, double-wipe copper alloy contacts
- All mounting hardware included
- Limited 10-year warranty
- Mounting hardware included
- UL and CSA listed
- Use To Reduce The Size Of The Conduit Hole Opening In Steel and Other Metal Enclosures
- Must Use One Inside and One Outside
- For Indoor Use Only
TAYMAC wall plates are used in home, commercial or industrial settings for enhance durability and appearance. Metal wall plates have a beauty, weight and feel that plastic cannot replicate. Includes screws in matching finish.
- Easily primed and painted to match or complement walls
- Solid sound compared to thin, hollow resonance of economy plastic wall plates
- Durable, won't crack, peel or discolor over time
- Won't bow, crack or distort during installation
- Premium powder coat
- Green Straight Slot and Hex Head 10/32" Screw with Washer
- 3/8" Long
- Used For Quick Grounding Of Switch and Outlet Boxes
The RK5 fuse provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from single phasing on three phase systems. Simplifies and improves blackout prevention (selective coordination). Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short-circuit and overload protection. The overload element provides protection against low level overcurrent of overloads and will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds.
- 50 Amp
- 250-Volt
- UL Listed
- High SCCR
MASQUE wallplates designed for home and commercial use for enhanced ascetics and durability. Easily paintable or wallpapered to match or compliment walls. Includes screws in matching finish.
- Unbreakable, premium plastic wallplates
- Hide outdate, discolored wallplates
- Customize with adapters
- Won't crack or distort during installation
The RK5 fuse provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from single phasing on 3 Phase systems. Simplifies and improves blackout prevention (selective coordination). Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short-circuit and overload protection. The overload element provides protection against low level overcurrent of overloads and will hold an overload which is 5-times greater than the ampere rating of the fuse for a minimum of 10-seconds.
- 100 Amp
- 250-Volt
- UL Listed
- 1-pack
Metallic Liquid-Tite Connecter 1/2"
HUBBELL WIRING Device-Kellems wall plates bring an unparalleled combination of features, benefits and advantages. They are elegant enough for the home and tough enough to withstand the most rigorous environments. Bryant nylon wall plates are designed for durability and easy cleaning. Standard sized wall plates are 1/8 in. larger to give you that extra coverage to hide rough box openings. The depth is 1/4 in. so that it will comfortably fit over the device even on imperfect installations or on retrofit work.
- Nylon wall plate is virtually unbreakable
- Smooth finish is easy to clean
- Mounting screws included, brass, painted slotted screw head
- Captive mounting screw hole, screw won't fall out of plate
Metallic Bronze 1 Gang Horizontal Self-Closing Cover. For Duplex Receptacles, Switches Or Combination Devices.
- Use To Cover Exposed Holes In Steel Outlet Boxes and Other Metal Enclosures
- Indoor Use Only
- 10 Per Bag
The 1/2 in. Compression Connector is a non-metallic UF Connector, compression type for underground feeder cable. It has a low-profile design to fit the new smaller UF cables as well as standard sizes. The connector is UL listed as well as CSA and has a cable range of 14/2 in. - 12/2 in.
- Compression type for underground feeder cable
- Low profile design to fit the new smaller UF cables as well as standard sizes
- Trade size: 1/2 in.
- Knockout size: 1/3 in.
- Cable range: 14/2 in. - 12/2 in.
- Dimensions: 1.792 in. x 0.630 in. x 1.042 in.
Designed for home and commercial use for enhanced ascetics and durability. Easily paint or wallpaper to match your decor. Includes screws in matching finish.
- Unbreakable, premium plastic wall plates
- Hide outdated, discolored outlets
- Won't crack or distort during installation
- PVC material resists wear
Leviton carries a complete selection of wall plates in multiple colors and configurations to satisfy any need. Wall plates come in 3 sizes, standard, midway and jumbo. Midway and jumbo sizes provide helpful options to cover wall imperfections.
- Midway size - 3/8 in. larger on all sides
- Unbreakable nylon
- Easy to clean, smooth surface
- Color-matched metal mounting screws included
- Midway size hides small wall imperfections
- UL and CSA Listed
Levitons line of Extra Heavy-Duty Industrial Grade receptacles are designed and manufactured to withstand the harsh conditions typically associated with industrial environments. Available in a wide variety of configurations, including isolated ground, tamper-resistant, hospital grade, etc. These Industrial Grade devices are the electrical contractor's choice for use in factories, schools, hospitals and commercial office buildings.
- Thermoplastic
- Designed and manufactured to withstand the harsh conditions typically associated with industrial environments
- 6R to 50R NEMA rating
- 10-year limited warranty
This liquid title connector is a member of the Snap2It Series. For use only with liquid-tight conduit, type B only. The product has easy, push on installation, no tools required.
- Competitively priced
- Fast installation
- Trade size: 3/4 in.
- Knockout size: 3/4 in.
- Dimensions: 2.376 in. x 0.619 in. x 1.420 in.
It is a thin-wall conduit strap. One-hole Snap-On type. 1-year warranty against defect.
- Steel material
- Thin wall
- 16-Gauge
- 3/4 in. length
HUBBELL WIRING Device-Kellems wall plates bring an unparalleled combination of features, benefits and advantages. They are elegant enough for the home and tough enough to withstand the most rigorous environments. Bryant nylon wall plates are designed for durability and easy cleaning. Standard sized wall plates are 1/8 in. larger to give you that extra coverage to hide rough box openings. The depth is 1/4 in. so that it will comfortably fit over the device even on imperfect installations or on retrofit work.
- Nylon wall plate is virtually unbreakable
- Smooth finish is easy to clean
- Mounting screws included, brass, painted slotted screw head
- Captive mounting screw hole, screw won't fall out of plate
A series spring wound auto off in-wall time switch. Application includes whole house fans, indoor/outdoor lighting, bathroom fans and lights, self-storage. Features variable timing: twist knob for time on setting. Easy set: no adjustments. Just wire and go.
- Twist knob for variable time setting
- Model does not have position for constant on hold feature - see A512HHW
- Easy wiring: no neutral required, great for retrofit and it use as single or in multi-gang box with no de-rating
- SPST switch
- Wall plate: fits standard or decorator style wall plates
- 125/250/277 VAC, 50/60Hz input voltage, terminal size: #12AWG
- Operating temperature: 32 degree F to 122 degree F (0 degree C to 50 degree C), operating temperature: 32 degree F to 122 degree F (0 degree C to 50 degree C)
Murray offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home's electrical system. To provide additional protection Murray offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and voltage spikes. Circuit breakers are intended for switching and protection of your home's wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current.
- Single pole, 20 Amp 120-Volt type MP circuit breaker
- 10,000 AIC interrupting rating
- Murray type MP circuit breakers provide easy plug-in connections in Murray enclosures and the time saving insta-wire feature
- Compatible with Murray rock solid load centers
- Use for overload and short-circuit protection of your electrical system
- Thermal-magnetic
- Provides a manual means of energizing and de-energizing a circuit
- Easy plug in connections in Murray load centers
Our 1 in. plastic knock-out seal. This item costs less than the steel snap-in blanks and provides a safer installation. A metal blank in a plastic box or enclosure is not grounded and could become a shock hazard.
- Plastic - provides safer installation
- Black
- For knock-outs
- Trade size: 1 in.
- Dimensions: 1.500 in. x .468 in.
- Use To Reduce The Size Of The Conduit Hole Opening In Steel and Other Metal Enclosures
- Must Use One Inside and One Outside
- For Indoor Use Only
Our Black Button Non-Metallic Push-In Connector for NM Cable. The black button may be used for both 1 or 2 cables and installs easily into KO using light finger pressure. It holds the wires securely and meets and exceeds UL pullout tests. The black button removes very easily with a twist of a screwdriver.
- Fast and easy snap in installation of single or multiple cables
- Easy to remove and reuse
- Made of non-conductive plastic
- Trade size: 3/4 in.
- Knockout size: 3/4 in.
The Red Dot cover is made of copper-free aluminum that provides increased corrosion resistance. Cover has clean edges provide good gasket sealing. Cover is also 5 in. Dia with 3-1/2 in. Mounting Holes on Center.
- Non-metallic round ceiling box cover is designed to cover ceiling boxes when they are not in use, the cover is made with PVC and is classified for fire wall assemblies, it also meets NEMA OS-2 and is UL listed to help ensure safety
- 3-1/2 in. mounting holes on center
- White in color
- Aluminum
HUBBELL WIRING Device-Kellems wall plates bring an unparalleled combination of features, benefits and advantages. They are elegant enough for the home and tough enough to withstand the most rigorous environments. Bryant nylon wallplates are designed for durability and easy cleaning. Standard sized wallplates are 1/8 in. larger to give you that extra coverage to hide rough box openings. The depth is 1/4 in. so that it will comfortably fit over the device even on imperfect installations or on retrofit work.
- Nylon wall plate is virtually unbreakable
- Smooth finish is easy to clean
- Mounting screws included, brass, painted slotted screw head
- Captive mounting screw hole, screw won't fall out of plate
Screw-On 90 degree non-metallic connector for use with non-metallic liquid tight conduit, type B. The connector is produced from UV rated plastic for long outdoor life. Simply screw the connector onto the conduit until it stops, if the fittings are not in alignment with the knockout, you may unscrew the fitting up to one full turn for adjustment.
- Conduit threads onto ferrule and up inside the outer body, inside taper squeezes down on the outside of conduit for a superior liquid tight seal
- UV rated plastic
- Use with non-metallic liquid tight conduit, type B
- Also for use with flexible non-metallic tubing
- Trade size: 1/2 in.
- Knockout size: 1/2 in.
- Dimensions: 2.110 in. x 0.542 in. x 2.525 in.
HUBBELL WIRING Device-Kellems wall plates bring an unparalleled combination of features, benefits and advantages. They are elegant enough for the home and tough enough to withstand the most rigorous environments. Bryant nylon wallplates are designed for durability and easy cleaning. Standard sized wallplates are 1/8 in. larger to give you that extra coverage to hide rough box openings. The depth is 1/4 in. so that it will comfortably fit over the device even on imperfect installations or on retrofit work.
- Nylon wall plate is virtually unbreakable
- Smooth finish is easy to clean
- Mounting screws included, brass, painted slotted screw head
- Captive mounting screw hole, screw won't fall out of plate