Electrical
The Vertical 21 cu in. PVC 1-Gang Wall Box Adjust-a-box with Adjustable Bracket for Vertical Mount is designed to allow adjustment of depth after the wall covering has been installed. Adjusts to any wall covering. The Zip Box Blue 1-Gang 20 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Typical uses are in kitchens and bathrooms
- Protects indoor wiring from impacts, dust and wear
- Thermoplastic construction resists rust and won't conduct electricity
- Mounts to standard wood or metal stud horizontally
- Convenient adjustable bracket for ease of installation
- UL Listed
Leviton carries a complete selection of wall plates in multiple colors and configurations to satisfy any need. Wall plates come in 3 sizes, standard, midway and jumbo. Midway and jumbo sizes provide helpful options to cover wall imperfections.
- Sleek contemporary decora styling
- Easy to clean, smooth surface
- Color-matched metal mounting screws included
- Use with decora devices, GFCIs and lighting controls
- CSA and UL Listed
Cable protector protects NMSC or raceway wires running through wood studs from accidental nail, screw or drill penetration. No fasteners needed with the cable protector. The dimension of protector is 2-9/16 in. long x 1-1/2 in. wide.
- 1/2 in. integral spikes used to mount to wood stud
- Made of pre-galvanized 0.0625 in. thick steel
- No additional hardware required
- Position protector and hammer down spurs
This wing-type wire connector is yellow in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Tough thermoplastic, UL 94-Volt 2 flame-retardant shell
- Zinc plated square wire spring
- Rated to 600-Volt maximum in building wiring and 1000-Volt maximum in lighting fixtures and signs
- No pre-twisting required, push stripped conductors into connector and screw on
Leviton makes it easy for you to comply with the 2008 NEC mandate for TR Receptacles in all new residential housing. This requirement results from a Consumer Product Safety Commission study that documented injuries in the home caused each year by children attempting to insert foreign objects into receptacles. TR receptacles have been mandated in hospital pediatric wards for over 20 years and have proven to effectively prevent electrical injuries. As a long-time manufacturer of tamper-resistant devices, we are pleased to be at the forefront of this safety measure with an expanded product line that encompasses a wide range of TR devices in Residential and Commercial Grades.
- Shutter mechanism inside the receptacle blocks access to the contacts unless a 2-prong plug is inserted, helping ensure hairpins, keys, etc. will be locked out
- TR symbol on residential receptacles assures they meet 2008 NEC requirements the 2008 NEC requirement
- Heavy-duty construction offers long, trouble-free service life
- Available in an array of colors in both decora and traditional styles
- Meets 2008 NEC requirements
- CSA listed
This wire connector is yellow in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
This wire connector is tan in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
10-32 in. x 3/8 in. slotted hexagon-head washer-face ground screw. Green dye finish and 6 in. solid copper #12 AWG insulated wire. Wire comes pre looped at 1 end.
- Pre-looped 6 in. solid copper # 12 AWG insulated wire
- Steel
- #12 AWG insulated wire
- 0-32 x 3/8 in. slotted hexagon-head washer-face ground screw with green dye finish and a 6 in. solid copper #12 AWG insulated wire
This wire connector is red in color. It is UL listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Flame retardant - thermoplastic shell provides excellent electrical insulation
- Fixed, precise square wire spring provides more securely gripping on conductors
- Sure-grip ribs improve gripping ability and comfort
- Deep skirt entry provides protection from flashover and shorts
Blackburn Type H - High Strength Split-Bolt Connector. Conductor Range for Equal Main and Tap 4 Sol-8 Sol, Conductor Range for Min Tap with One Max Main 14 Sol. Both the bolt and nut are made of high-strength corrosion-resistant bronze alloy.
- High strength split-bolt connector
- Conductor range for equal main and tap 4 sol-8 sol
- Bolt and nut of hex design
- UL E9809
Levitons standard combination switch/receptacle is the perfect choice for any area in a home. it is simple, functional design provides the use of a switch and a tamper-resistant receptacle in a one-gang space. Its impact-resistant exterior ensures damage protection and a long service life. These devices come in a range of colors and are backed by a limited two-year warranty.
- Shutter mechanism inside the receptacle blocks access to the contacts unless a two-prong plug is inserted, helping ensure hairpins, keys, etc., will be locked out
- TR symbol on residential receptacles assures they meet the 2008 NEC requirement
- Heavy-duty construction offers long, trouble-free service life
- Protects children from electrical shock injuries
Leviton offers a comprehensive line of UL listed products for every electrical need. Leviton's wiring devices and accessories are backed by state-of-the-art research, design, engineering, manufacturing, testing and quality assurance. You won't find a more complete selection anywhere else.
- For standard household use
- Controls light(s) from one location
- Quick wire push-in and side wired
- Large triple combination screws for fast wiring
Leviton offers a comprehensive selection of wall plates that are designed to enhance residential home decor and blend into commercial settings. Assortments of custom configurations are offered in various sizes for both single-gang and multi-gang applications. Available in a breadth of colors and materials, Leviton wall plates accent any wall covering.
- White thermoset plastic finish
- Oversized wall plates are 0.75 in. higher and wider than standard wall plates and provide extra coverage for wall irregularities
- Includes metal mounting screws that match plate color
- Noncombustible and easy to clean
- Includes metal mounting screws which match plate color
The T104-20 Mechanical Water Heater Time Switch Regulates Electric Water Heaters. Daily Operation Can Be Set with Trippers From 1 To 23 Hours. Enables Shifting Electricity Use into Off-Peak Time Periods to Reduce Utility Cost. Designed for Industrial, Commercial and Residential Applications.
- Two sets of ON/OFF trippers
- Enables shifting electricity use into off-peak hours to reduce energy costs
- Convenient external override switch
- Up to 12 ON/12 OFF events
The 1-Gang Non-Metallic New Work Box with Bracket is great for residential and light commercial applications. It is made with PVC and works with non-metallic sheathed cable in accordance with Article 314 of the NEC. The box can mount to steel and wooden studs and is suitable for masonry walls.
- Use with non-metallic sheathed cable in accordance with article 314 of the NEC
- For residential and light commercial use
- Suitable for masonry walls
- Sized for standard devices and switches
- Thermoplastic construction resists rust and will not conduct electricity
- UL listed to UL514C and fire rated for safety
- Meets NEMA OS-2
- Bracket for 3/8 in. to 5/8 in. wallboard, steel and wood stud mounting
- Product has pry outs
The 1 in. x 3/4 in. Reducing Bushing is die cast of durable zinc alloy and suitable for indoor use only. The bushing is designed to reduce the entry size of a run of threaded rigid conduit or intermediate metal conduit (IMC). UL and CSA listed for safety and peace of mind.
- Reduces the run entry size of threaded rigid conduit and IMC
- Zinc alloy is high strength and non-corrosive
- Compatible with rigid conduit and IMC
- Designed for indoor use only
Leviton offers a comprehensive selection of wall plates. These are designed to achieve these basic functions. Enhance residential home decor, blend into commercial settings and protect industrial applications.
- Individual plastic wrapping to protect wall plate surface
- Easy to clean, smooth finish
- Color-matched metal mounting screws supplied in an envelope to protect plate from scratches
- UL Listed and CSA certified
Cable Ties are designed for commercial use with wide operating temperature ranges and superior holding power. Cable Ties are manufactured using a superior nylon 6/6 material. All cable ties are UL62275 listed.
- Nylon 6/6
- UL62275 TY 2,21
- Mount head
- Natural color
Leviton offers a comprehensive selection of wall plates that are designed to enhance residential home decor and blend into commercial settings. Assortments of custom configurations are offered in various sizes for both single-gang and multi-gang applications. Available in a breadth of colors and materials, Leviton wall plates accent any wall covering.
- Ivory finish
- Developed to meet the needs of individual room/office decor
- Includes metal mounting screws that match plate color
- Noncombustible and easy to clean
Decora wall plates accent any wall covering with a wide selection of colors and materials. Adding contemporary styling to any residential or commercial application and enhancing every interior. Assortments of custom configurations are offered in various sizes for both single-Gang and multi-Gang applications.
- Crisp white finish
- Sleek, smooth contemporary architectural styling enhances fine decor
- Resist dust accumulation with decora smooth face and round edges
- Includes metal mounting screws that match plate color
- CSA and UL Listed
This wing-type ground wire connector is green in color. It is UL Listed for pressure type grounding connectors. It can be sued on solid copper to copper wire combinations only.
- Tough thermoplastic, UL 94-Volt 2 flame-retardant shell
- Color-coded green for quick identification
- No pre-twisting required, push stripped conductors into connector and screw on
- Designed for making positive ground connections and bonding non-metallic sheathed cable
Bond flexible metal conduit (FMC) to a steel outlet box or other metal enclosure with this 3/8 in. 90 degree Flex Connector. The Tri Drive screws are compatible with Phillips, slotted and square screwdrivers. This connector meets UL and CSA requirements.
- Connects and bonds FMC and armored cable to metal enclosures
- Body and locknut made of high-strength, corrosion-resistant zinc alloy
- Screw and clamp made of galvanized steel
- Fits in a standard 1/2 in. knockout
- Tri-drive screw head is compatible with Phillips, slotted and square screwdrivers
- UL and CSA Listed
- Reversible locknut designed to cut through protective coatings on boxes and enclosures to ensure ground continuity
- For indoor use only
Leviton's award-winning line of designer style devices enhance every interior from traditional to contemporary. They easily replaces standard devices throughout your home and add the perfect finishing touch. The Decora offering includes switches, outlets, GFCIs, lighting controls, home automation, multi-room audio/video products, fan speed controls and wall plates.
- Replaces any standard single pole switch
- Controls light(s) from 1 location
- Quick wire push-in wiring
- Use with decora wall plate (sold separately)
Use the 1 in. Rigid or IMC Conduit 1-Hole Strap when extra load bearing is needed to attach conduit to wood, masonry or a like surface. This zinc-plated strap snaps in place. Positively snaps onto the conduit.
- Secures rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required
- Zinc-plated steel resists corrosion
- UL Listed
- For indoor or outdoor applications
Eaton has enhanced its premium Type CH residential circuit breakers, making the best even better. In addition to the industry exclusive "Trip to OFF" and simple 1-Step Reset feature, Eaton has added a trip flag to visibly indicate breaker status. Along with Tri-Drive screws and new markings that highlight ratings and the Eaton brand.
- Primary function of a circuit breaker is to protect the wire from overheating (overload) and fault currents (short circuit)
- Amperage rating: 20 Amp
- 3/4 in. single pole breaker
- Flag visually confirms tripped status, making it easy for the homeowner to identify
- For use in type CH load centers only
- Interrupt rating - 10 kAIC
- Voltage rating is 120/240-Volt
- (1) #14-8, (2) #14-10 AWG Cu/Al 60 degree C or 75 degree C
- HACR rated
HUBBELL WIRING Device-Kellems wall plates bring an unparalleled combination of features, benefits and advantages. They are elegant enough for the home and tough enough to withstand the most rigorous environments. Thermoplastic wall plates are designed for easy cleaning. Mid-sized wall plate. The depth is 1/4 in. so that it will comfortably fit over the device even on imperfect installations or on retrofit work.
- More rigid: less curving and less dimpling
- Geometrically flatter and straighter lines
- Square corners: match the profile in the installed base, better for renovation work
- Smooth finish
- Easy to clean
- Additional depth for a better fit on old work boxes
- Not affected by humidity and moisture
- Will not warp and keeps form in hot environments
1-1/2 in. x 10 ft. Electric Metallic Tube Conduit offers protection from magnetic fields, impact damage and crushing when pulling electrical cable. This steel conduit resists flattening, kinking and splitting and is coated with zinc for corrosion and abrasion resistance. Allied conduit has an E-Z pull interior coating provides a smooth surface for faster wire pulling.
- Protects insulated electrical conductors and cables from magnetic fields, impact damage and crushing
- E-Z pull interior coating provides a smooth surface for faster wire pulling
- Excellent mechanical protection for conductors
- Ductility for faster and easier bending
- High grade mild strip steel for durability and longer life
- Listed to underwriter's laboratories safety standard UL 797
- Manufactured in accordance with ANSI C80.3
Terminal service packs are handy and low priced, ideal for small jobs. Porcelain construction for higher temperature applications. Keep a pack on your truck, or use at home.
- Small #3 high heat porcelain wire connector
- 12-10 AWG wire (15-pieces)
- For higher temperatures - up to 1,800F
- Porcelain
Ultra-Whip is a non-metallic conduit constructed with two different PVC materials that are extruded to form a highly flexible product designed especially for electrical applications. A rigid material forms the stiff helical spring, which is completely encapsulated by a second flexible compound. Stranded Copper THHN/THWN conductors and UL Listed LFNC-B Fittings are installed at the factory. 12 in. wire leads with 1/2 in. of stripped insulation are left exposed at each end for hassle-free hook-ups. It is commonly used for connecting air conditioners, pumps, motors, compressors, swimming pool equipment and similar equipment.
- Brand received (Cerrowire or Southwire) varies by zip code
- Highly flexible non-metallic conduit with factory installed conductors
- Stranded copper THHN/THWN insulated conductors
- Green insulated copper grounding conductor
- Liquid-tight flexible non-metallic conduit type B (LFNC-B) fittings
- Intended for 208-Volt/240-Volt/480-Volt single phase circuits
- Resistant to rust, cracks and separation
- Non-metallic raceway is non-conducting
- 600-Volt
Decora wall plates accent any wall covering with a wide selection of colors and materials. Adding contemporary styling to any residential or commercial application and enhancing every interior. Assortments of custom configurations are offered in various.
- Crisp ivory finish
- Sleek, smooth contemporary architectural styling enhances fine decor
- Resist dust accumulation with decora smooth face and round edges
- Includes metal mounting screws that match plate color
- Matching metal screws included
- CSA and UL Listed
Switch sealers fits behind an outlet face plate. These prevent drafts form coming through walls around outlet plate. It is white color.
- Reduces drafts and heat loss
- Fire-retardant plastic foam construction for durability
- UL listed for safely
- Enough for 144 standard electrical switches
Leviton's Decora duplex receptacles are designed for a chic appearance, quick installation and durability. The impact-resistant thermoplastic design allows for a long service life and high performance in homes, offices, schools and other settings. It also coordinates beautifully with Leviton's complete line of Decora devices.
- Shutter mechanism inside the receptacle blocks access to the contacts unless a 2-prong plug is inserted, helping ensure hairpins, keys, etc. will be locked out
- Protects children from electrical shock injuries
- Ultrasonic heavy-duty construction offers long, trouble-free service life
- TR symbol on residential receptacles assures they meet the 2008 NEC requirement
- Double-wipe power contacts for reliable conductivity and plug retention
Leviton offers a comprehensive selection of wall plates that are designed to enhance residential home decor and blend into commercial settings. Assortments of custom configurations are offered in various sizes for both single-gang and multi-gang applications. Available in a breadth of colors and materials, Leviton wall plates accent any wall covering.
- White thermoset plastic finish
- Developed to meet the needs of individual room/office decor
- Includes metal mounting screws that match plate color
- Noncombustible and easy to clean
This wire connector is gray in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
Eaton has enhanced its premium Type CH residential circuit breakers, making the best even better. In addition to the industry exclusive "Trip to OFF" and simple 1-Step Reset feature, Eaton has added a trip flag to visibly indicate breaker status. Along with Tri-Drive screws and new markings that highlight ratings and the Eaton brand.
- Primary function of a circuit breaker is to protect the wire from overheating (overload) and fault currents (short circuit)
- Amperage rating: 15 Amp
- 3/4 in. single pole breaker
- Flag visually confirms tripped status, making it easy for the homeowner to identify
- For use in type CH load centers only
- Interrupt rating - 10 kAIC
- Voltage rating is 120/240-Volt
- (1) #14-8, (2) #14-10 AWG Cu/Al 60 degree C or 75 degree C
- HACR rated
Used to close an outlet box. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- Flat, 1/2 in. center knockout
- Made of 0.0625 pre-galvanized steel
- cULus Listed
The Vertical 49 cu. in. PVC 3-Gang Wall Box Adjust-a-box with Adjustable Bracket for Vertical Mount is designed to allow adjustment of depth after the wall covering has been installed. Adjusts to any wall covering. Designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Ideal for various drywall thicknesses and wall finishes
- Includes mounting hardware
- Convenient adjustable bracket for ease of installation
- Adjusts from 0 in. to 1-3/4 in. D
- Thermoplastic construction resists rust and won't conduct electricity
- UL listed and 2-hour fire rating for safety
Blackburn ground Rod Clamps Type G. Use with Rod Size 3/4 in., Wire Range 10 Sol. - 2 Str. Made of Cast and has high-strength corrosion-resistant copper alloy. UL listed for direct burial. Furnished with hex head bolts. Simplified, compact design makes lasting, trouble-free connection.
- Wire range 10 sol. - 2 Str
- Rod size 3/4 in.
- Copper
- UL E3060
Familiar and functional, Leviton Traditional Wallplates are designed for use with Traditional Leviton devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton offers Traditional Wallplates in a vast array of colors and configurations.
- Oversized wallplates are used to conceal greater wall irregularities than those hidden by midway wallplates
- Oversized wallplates are a full 0.75 in. higher and wider than standard size wallplates
- Smooth face and rounded edges resist dust accumulation
- Designed for high dielectric strength and arc resistance
This wire connector is orange in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
Used to house wiring devices such as switches or outlets. Acceptable for use in 2-hour fire rated walls. Gangable option.
- Gangable
- Nine 1/2 in. knockouts
- UL Listed
- 18.0 cu. in. capacity
- Plaster ears
This wing-type wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Tough thermoplastic, UL 94-Volt, 2 flame-retardant shell
- Zinc plated square wire spring
- No pre-twisting required, push stripped conductors into connector and screw on
- Maximum AWG: 5#12
Eatons Type CHQ circuit breakers protect the wires in your home from overheating (referred to as an overload) and fault currents (referred to as short circuits). CHQ Breakers are classified replacement circuit breakers considered suitable, by underwriters laboratories, for use in another manufacturers" load center. These breakers have been tested extensively in QO panels. This level of testing assures that the breakers meet identified standards and have been found suitable by UL for the specified purpose.
- Contractors can streamline inventory by carrying 1 manufacturer's circuit breaker versus multiple manufacturer's
- CHQ breakers are available in 1 and 2 pole configurations
- 1 pole requires 3/4 in. space, 2 pole requires 1-1/2 in. space
- Trips to the off position
Leviton's line of wall plates provides a complex selection of wall plates for industrial, commercial and residential applications. All Leviton wall plates are noncombustible with an easy to clean smooth finish. Individual plastic wrapping designed to protect the surface. Color and finish match mounting screws are included and all Leviton plates are UL Listed and CSA certified. They also confirm to all NEMA and ANSI standards.
- Midway wall plates can be mounted onto larger-volume outlet boxes and/or used to hide wall irregularities
- Full 0.375 in. taller and wider than standard wall plates
- Smooth face and rounded edges resist dust accumulation
- Designed for high dielectric strength and arc resistance
Familiar and functional, Leviton Traditional Wall Plates are designed for use with Traditional Leviton devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton offers Traditional Wall Plates in a vast array of colors and configurations.
- Oversized wallplates are used to conceal greater wall irregularities than those hidden by midway wallplates
- Oversized wallplates are a full 0.75 in. higher and wider than standard size wallplates
- Smooth face and rounded edges resist dust accumulation
- Designed for high dielectric strength and arc resistance
This wire connector is red in color. It is UL Listed for pressure type wire connector. It can be used on solid and/or stranded copper wires.
- Temperature rating 105 degree C (221 degree F)
- Flame retardant - thermoplastic shell provides excellent electrical insulation
- Fixed, precise square wire spring provides more securely gripping on conductors
- Sure-grip ribs improve gripping ability and comfort
- Minimum AWG 1#18 with1#20 - maximum AWG 4 #16 with1 #20
Blackburn Type ADR-ALCUL Single-Conductor, 1-Hole Mount, Conductor. Wire range 14 AWG-2Str, Length 1-5/32 in., Width 1/2 in., Height 9/16 in., 1/4 in. Bolt Hole. Made of Tin-Plated Aluminum.
- Type ADR-ALCUL single-conductor
- Conductor range 14 AWG-2Str
- 1-hole mount
- UL E9809
- Easy installation no special tools required
Used for mounting switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 1/4 in. raised
- UL Listed, CSA
- 1.5 cu. in. capacity