• Flush mount closer
• Closes both large and small gates up to 125 lbs. easily and gently
• Will work with most in-line hinge arrangements
• Complies with most pool gate safety recommendations
• Adjustable closing speed
• Adjustable latching speed
• Installs on side, top, middle or bottom of either right or left hand of gate
• Mounts on opening side of gate, pushing it closed
• Maximum opening angle of 90 degrees. LockeyUSA recommends the use of a gate stop to prevent damage to the closer
• Hold open feature

The TB600 Turtle Back Hydraulic Gate Closer from LockeyUSA offers firm, quiet hydraulic action for easy closing of pedestrian gates. This gate closer features a top-of-the-line design with a high performing cylinder for a superior product. With a pre-set closing speed delivering controlled closure, the TB600 automatic gate closer secures pedestrian gates up to 72 inches in width, and up to 250 pounds. Hotel pool gates, parking lot access gates, beach access gates, office complex gates, resort gates, and barrier gates highlight a few of the many places this gate closer can be applied. The TB600 is a reliable, high-quality gate closure that gives you convenient security and is often used in conjunction with the LockeyUSA 2835, 2830, 1150 and SUMO GL2 gate lock. This powerful hardware combination provides secured, self-closing access control with the convenience of a keyless entry system.

• Closes small and large gates from 150 lbs. to 250 lbs.
• Hydraulic/nitrogen gas controlled closing speed
• Installs on top/middle/bottom
• Works with left and right hand gates
• Mounts on opening side of gate
• Pushes the gate closed
• Mounting brackets and fitting bar included
• Not compatible with gates less than 30 in. W
• To retain product warranty and restrict gate opening angle, a gate stop must be installed
• Gate width: 44 in. to 72 in.
• Maximum opening angle: 100 degree
• Minimum operating temperature: 15 degree F, maximum operating temperature: 122 degree F
• Type of gate material: vinyl, steel, wood, chain link
• Closing/latch method: hydraulic/nitrogen gas
• Material: steel or stainless steel color: TB600: black, TB600SS: silver finish: TB600: painted, TB600SS: stainless steel
• Hinge arrangements: in-line or offset
• Opening pressure: approximate 8 lbs. to 18 lbs.

The TB175 Black Turtleback Hydraulic Gate Closer is perfect for applications where a lightweight fully featured gate closer is required. Easy bolt-on installation, no welding required. The TB175 fits flush with gate and frame arrangements up to 110 lbs. Both the travel and latching speeds are fully adjustable, ensuring gates close in a controlled manner. The TB175 is ideal for garden gates.

• Flush mount closer
• Closes gates up to 110 lbs. easily and gently
• Will work with most in-line hinge arrangements
• Mounts on opening side of gate, pushing it closed
• Adjustable closing speed
• Adjustable latching speed
• Hold open feature
• Installs on top, middle or bottom of either right or left hand of gate
• Max. Gate Weight: 110 lbs.
• Dimensions: 12 1/2 L x 2 1/2 W x 2 3/8 D
• Width: 54 Max. Opening Angle: 90 degrees
• Type of Gate Material: Metal, Vinyl, Wood
• Hinge Arrangements: In-line
• Material: Steel
• Closing/Latching: Adjustable

The TB250 Black gate closer is ideal for new and existing gate systems, both residential and commercial gates, pool gates and any application where the gate must close automatically for safety and security. This gate closer is adjustable with a hydraulic controlled closing speed and mounts on opening side of gate, pushing the gate closed. The TB250 closer is not compatible with gates less than 30 in. To retain product warranty and restrict gate opening angle, a gate stop must be installed. *Operation of the closer in temperatures below or above the minimum and maximum operating temperatures may result in improper operation or complete failure of the closer.

• Adjustable hydraulic (nitrogen gas) controlled closing speed
• Closes small and large gates from 50-125 lbs.
• Installs on top/middle/bottom
• Works with left and right hand gates
• Mounts on opening side of gate
• Pushes the gate closed
• Mounting brackets and fitting bar included
• Not compatible with gates less than 30 inches wide
• To retain product warranty & restrict gate opening angle, a gate stop must be installed
• Gate Width: 36-52
• Max. Opening Angle: 100 degrees
• Min. Operating Temperature: 15 degrees Fahrenheit*Max. Operating Temperature: 122 degrees Fahrenheit
• Type of Gate Material: Vinyl, Steel, Wood, Chain Link
• Closing/Latch Method: Hydraulic/Nitrogen Gas
• Material: SteelFinish: PVC wrapped
• Hinge Arrangements: In-line or Offset
• Opening Pressure: Approx. 3-7 lbs.

The TB450 Black gate closer is ideal for new and existing gate systems, both residential and commercial gates, pool gates and any application where the gate must close automatically for safety and security. This gate closer is adjustable with a hydraulic controlled closing speed and mounts on opening side of gate, pushing the gate closed. The TB450 closer is not compatible with gates less than 30 in. To retain product warranty and restrict gate opening angle, a gate stop must be installed. *Operation of the closer in temperatures below or above the minimum and maximum operating temperatures may result in improper operation or complete failure of the closer.

• Adjustable hydraulic (nitrogen gas) controlled closing speed
• Closes small and large gates from 75 lbs. to 175 lbs.
• Installs on top/middle/bottom
• Works with left and right hand gates
• Mounts on opening side of gate
• Pushes the gate closed
• Mounting brackets and fitting bar included
• Not compatible with gates less than 30 in. W
• To retain product warranty and restrict gate opening angle, a gate stop must be installed
• Gate width: 40 in. to 64 in.
• Maximum opening angle: 100 degree
• Minimum operating temperature: 15 degree F, maximum operating temperature: 122 degree F
• Type of gate material: vinyl, steel, wood, chain link
• Closing/latch method: hydraulic/nitrogen gas
• Material: steel finish: PVC coated
• Hinge arrangements: in-line or offset
• Opening pressure: approximate 6 lbs. to 12 lbs.

The TB100 Turtle Back Gate Closer is designed to push a gate up to 125 lbs. closed with adjustable speed control. The TB100 must be mounted on the hinge side or pull side of the gate and pushes the gate closed. It is recommended to install on gates with in-line flush hinges.

• Gently closes gates up to 125 lbs.
• Pushes gate closed
• Adjustable closing speed
• Can be installed on top, bottom or middle of gate
• Hinge Arrangements: In-Line Flush Hinges
• The LockeyUSA Turtle Back TB100 Hydraulic Gate closer must mount on the pull side of the gate
• Material: Steel; Finish: Powder-Coated Black
• Type of Gate Material: Vinyl, Wood, Steel
• Dimensions:12 1/2" L x 2 1/2" W x 2 3/8" D
• Closing/Latching Method: Hydraulic
• Material: SteelFinish: Powder-CoatedColor: Black
• Max. Operating Temperature: 110 degrees

The TB200 Turtle Back Hydraulic Gate Closer from LockeyUSA offers firm, quiet hydraulic action for easy closing of pedestrian gates. This gate closer features a top-of-the-line design with a high performing cylinder for a superior product. With a pre-set closing speed delivering controlled closure, the TB200 automatic gate closer secures pedestrian gates up to 52 inches in width, and up to 125 pounds. Hotel pool gates, parking lot access gates, beach access gates, office complex gates, resort gates, and barrier gates highlight a few of the many places this gate closer can be applied. The TB200 is a reliable, high-quality gate closure that gives you convenient security and is often used in conjunction with the LockeyUSA 2835, 2830, 1150 and SUMO GL2 gate lock. This powerful hardware combination provides secured, self-closing access control with the convenience of a keyless entry system.

• Closes small and large gates from 50 lbs. to 125 lbs.
• Hydraulic/nitrogen gas controlled closing speed
• Installs on top/middle/bottom
• Works with left and right hand gates
• Mounts on opening side of gate
• Pushes the gate closed
• Mounting brackets and fitting bar included
• To retain product warranty and restrict gate opening angle, a gate stop must be installed
• Gate width: 30 in. to 52 in.
• Maximum opening angle: 100 degree
• Minimum operating temperature: 15 degree F, maximum operating temperature: 122 degree F
• Type of gate material: vinyl, steel, wood, chain link
• Closing/latch method: hydraulic/nitrogen gas
• Material: steel
• Hinge arrangements: in-line or offset
• Opening pressure: approximate 3 lbs. to 7 lbs.
• Color: Black

The TB400 Turtle Back Hydraulic Gate Closer from LockeyUSA offers firm, quiet hydraulic action for easy closing of pedestrian gates. This gate closer features a top-of-the-line design with a high performing cylinder for a superior product. With a pre-set closing speed delivering controlled closure, the TB400 automatic gate closer secures pedestrian gates up to 64 inches in width, and up to 175 pounds. Hotel pool gates, parking lot access gates, beach access gates, office complex gates, resort gates, and barrier gates highlight a few of the many places this gate closer can be applied. The TB400 is a reliable, high-quality gate closure that gives you convenient security and is often used in conjunction with the LockeyUSA 2835, 2830, 1150 and SUMO GL2 gate lock. This powerful hardware combination provides secured, self-closing access control with the convenience of a keyless entry system.

• Closes small and large gates from 75 lbs. to 175 lbs.
• Hydraulic/nitrogen gas controlled closing speed
• Installs on top/middle/bottom
• Works with left and right hand gates
• Mounts on opening side of gate
• Pushes the gate closed
• Mounting brackets and fitting bar included
• Not compatible with gates less than 30 in.
• To retain product warranty and restrict gate opening angle, a gate stop must be installed
• Gate width: 40 in. to 64 in.
• Maximum opening angle: 100 degree
• Minimum operating temperature: 15 degree F, maximum operating temperature: 122 degree F
• Type of gate material: vinyl, steel, wood, chain link
• Closing/latch method: hydraulic/nitrogen gas
• Opening pressure: approximate 6 lbs. to
• Hinge arrangements: in-line or offset