Generator Accessories
The Generac Load Manager 50A is designed to optimize the performance of your generator during power outages by intelligently managing the load. These modules allow you to prioritize which appliances and systems receive power when your generator runs, ensuring essential devices stay powered while preventing overload. Overall you get more coverage with less when you use Generac's power load manager.
- Wire-free technology increased afford ability with wireless modules, lowering installation cost and providing the best whole-house generator option to fit any budget, smart management modules work with any home standby generator for flexibility with any standby solution
- Prioritize loads power items that are most important during an outage through customizable load priority selection and up to 8 modules per system can be used
- Load management features a lock out system, which permits blocking of specific loads only when using generator power, allowing for the important loads to be powered more often
- Externally visible LED status view load status without opening the electrical box for convenient management of power during an outage
Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution or Nexus Controller. The 200-Amp open transition switch is available in single phase with a service equipment rated configurations. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
- Service rated (RXSW) Generac automatic transfer switches are housed in an aluminum NEMA/UL type 3R enclosure, with electrostatically applied and baked powder paint
- Heavy duty Generac contactor is a UL recognized device, designed for years of service, the controller at the generator handles all the timing, sensing, exercising functions and transfer commands
- Used in tandem with smart management modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available
- Switch is covered by a 5-year limited warranty
- Replacement for RTSW200A3
Our heavy duty, all rubber power cords are the connecting link between the generator and a transfer switch via a power inlet box. All rubber cord stays flexible even in subzero temperatures. 50 ft. cord, 4 conductor, 6-Gauge wire with 50 Amp male (1450) + female (CS6364) ends. Made from UL Listed components.
- Connecting link between the generator and the power inlet box and/or transfer switch
- All rubber cord stays flexible even in subzero temperatures
- Male plug connects to generator and female end connects to power inlet box/transfer switch
- Made with UL Listed components
Scheduled maintenance is a necessity for all standby generators. The Protector Maintenance kits contain fuel, air and oil filters, a funnel and a chamois. Oil will need to be purchased separately based upon the recommendations listed. Maintenance for the fuel and oil filters is recommended at every 250-hours or 2-years and at 100-hours or 1-year for the air filter. If running in a dusty environment, more frequent maintenance may be required. Maintenance intervals may differ per model. Refer to the generator owner's manual for more information.
- Compatible with Generac 15 kW and 20 kW protector series diesel generators
- Includes all necessary hardware
- Instructions included
- Easy installation
A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations listed below. Maintenance is recommended at every 200-hours or 2-years.
- Air and oil filters
- 4 spark plugs
- Reminder sticker
- Oil funnel
- Chamois
- Click on the more info" tab to download the specifications pdf to view the wattage requirement guide
The 5 Gal. spill box screws into the existing fuel fill port of the base tank. It captures and contains fuel if over fueling or spilling occurs during the fill process. Its rugged, weatherproof enclosure is comprised of powder painted steel and pipe. It features a cover latch that can be locked for security.
- Compatible with Protector Series diesel generators
- Steel enclosure
- Lockable cover latch
- Easy to install
Some municipalities require the use of stainless steel fuel lines instead of the standard hoses provided with the diesel generator products. These stainless steel lines are fire resistant for additional safety. They are made specifically for Generac Protector Series Generators.
- Compatible with Generac 15 kW and 20 kW protector series diesel generators
- Made with braided stainless steel
- Fire proof
- Easy installation
The Generac Cold Weather Kit for Generac Liquid-Cooled Automatic Standby Generators with 1.6 l Engines helps your automatic standby generator maintain an ideal battery temperature. The kit is recommended for use in areas where the temperature drops below 30 degree F. For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators.
- Helps your generator maintain an ideal battery temperature for quick startup
- Recommended for use in areas where the temperature drops below 30 degree F
- For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators
- Includes a battery warmer with an automatically controlled thermostat
The Generac 5719 maintenance kit is designed for the 410 cc engine portable generators. Scheduled maintenance is a necessity to ensure the long life and top performance of your portable generator. If your generator has been running for extended periods or has been stored for several months, it's a good idea to change the oil and fill the tank with fresh gasoline. Be sure to review your owner's manual for the suggested maintenance schedule. The maintenance kit includes: Air Filter, Oil Filter, Oil Funnel, Spark Plug, Fuel Stabilizer, and Chamois. Oil must be purchased separately.
- Helps you extend the life and maintain the performance of your portable generator
- Includes air and oil filters
- Includes a spark plug and a spark plug wrench
- Includes an oil funnel, stabil sample and chamois
- Oil funnel
- Chamois
- Stabil sample
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
The alarm panel alerts the fuel fill operator when the tank reaches a 90% fill level by sounding an audible alarm and triggering an LED warning light. The panel mounts within the fuel fill and vents area of the generator enclosure and is housed in a NEMA 3R powder painted, steel enclosure. All mounting hardware and connection wire is included.
- Compatible with protector series diesel generators
- NEMA 3 indoor/outdoor rated
- Installation hardware included
- Easy installation
The Generac Extreme Cold Weather Engine Block Heater for Generac Liquid-Cooled Automatic Standby Generators gives an extra degree of weather protection to your Generac 25 kW or 30 kW liquid-cooled automatic standby generator. A block heater, step-by-step installation instructions and the necessary mounting hardware are included. Works in conjunction with a battery warmer to provide quick starting capability.
- Provides an extra degree of weather protection
- Keeps a generator performing in harsh conditions
- Works in conjunction with a battery warmer to provide quick starting capability
- For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators
- Includes a block heater, step-by-step installation instructions and necessary mounting hardware
A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations listed below. Maintenance is recommended at every 200-hours or 2-years.
- Air and oil filters
- 6 spark plugs
- Reminder sticker
- Pre-cleaner
- Oil funnel
- Chamois
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
Scheduled maintenance is a necessity for all standby generators. The Liquid-Cooled Scheduled Maintenance Kits offer all the components necessary to perform a complete maintenance on Generac liquid-cooled generators. Oil and coolant will need to be purchased separately based upon manufacturer recommendations listed below. Maintenance is recommended at every 200-hours or 2-years. If running in a dusty environment, more frequent maintenance may be required.
- Air and oil filters included
- 10 spark plugs included
- Reminder stickers included
- Pre-cleaner included
- Oil funnel included
- Chamois included
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators is designed for use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines. The block heater works in conjunction with a battery warmer to provide quick starting capability. For use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines
- Provides an extra degree of weather protection
- Keeps a generator performing in harsh conditions
- Works in conjunction with a battery warmer to provide quick starting capability
- For use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines
- Includes a block heater, step-by-step installation instructions and necessary mounting hardware
- Click on the "more info" tab to download the specifications pdf to view the wattage requirement guide
Designed for use with manual transfer switches and power inlet boxes, these heavy duty power cords connect a portable generator to the power inlet box and/or transfer switch. It includes male and female 4-wire twist-lock ends. The male plug goes to the generator and the female connects to transfer switch or power inlet box.
- Connecting link between the generator and the power inlet box and/or transfer switch
- All rubber cord remains flexible even in subzero temperatures
- Plug connects to generator and receptacle connects to power inlet box and transfer switch
- For use with generators equipped with 50 Amp outlets
The power inlet box is installed on the exterior of the house near your main electrical panel. Inside, it is hardwired to your manual transfer switch to restore power to your main electrical panel. When the power goes out, you simply connect one end of a power cord to your portable generator outlet. The other end is plugged into the power inlet box.
- 30 Amp, NEMA L14-30
- Raintight design even when the generator cord is connected
- NEMA 3R enclosure is rated for indoor or outdoor installation
- UL Listed
A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations. Maintenance is recommended at every 200-hours or 2-years. The Generac 4.6 l 80 kW Liquid-Cooled Generator Scheduled Maintenance Kit comes with an oil filter, an air filter, pre-cleaner, 8 spark plugs, a spark plug wrench, an oil funnel, a chamois and a reminder sticker.
- Use to perform a complete maintenance on Generac liquid-cooled generators
- Compatible with 4.6 l 80 kW units
- Designed for generators produced August 2010 or later
- Includes oil filter, air filter, pre-cleaner, 8 spark plugs, spark plug wrench, oil funnel, chamois and reminder sticker
- Oil funnel, chamois and reminder sticker included
After 200-hours of use or 2-years of ownership, use the Generic 6 kW 530 cc EcoGen. Air-Cooled Generator Scheduled Maintenance Kit to perform complete maintenance. It keeps your generator running smooth.
- Use to perform complete maintenance on a Generac EcoGen air-cooled generator
- For use on a 6 kW, 530 cc generator
- Maintenance is recommended at every 200-hours of use or 2-years of ownership
- Kit includes an air filter, oil filter, 2 spark plugs, an oil funnel, chamois and a reminder sticker
- Oil not included
Some municipalities require the use of stainless steel fuel lines instead of the standard hoses provided with the diesel generator products. These stainless steel lines are fire resistant for additional safety. They are made specifically for Generac Protector Series Generators.
- Compatible with generic 50 kW protector series diesel generators
- Made with braided stainless steel
- Fire proof
- Easy installation
Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.
- Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
- Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
- Service entrance rated 100 Amp 120/208-Volt 3 phase automatic transfer switch
- 5 year limited warranty
The Cold Weather Kits for the Protector Series consist of a block heater with all necessary mounting hardware and a battery warmer with a thermostat built-in to the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. These kits are recommended for generators installed in regions where the temperature regularly falls below 32 degree F (0 degree C). When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability.
- Compatible with generic 50 kW protector series diesel generators
- Battery warmer: 120-Volt, 75-Watt, 0.63 Amp
- Instructions included
- Easy installation
The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators is designed for use with Generac 36 kW and 48 kW liquid-cooled automatic standby generators. The heater works in conjunction with a battery warmer to provide quick starting capability. Includes a block heater, step-by-step installation instructions.
- Provides an extra degree of weather protection
- Keeps a generator performing in harsh conditions
- Works in conjunction with a battery warmer to provide quick starting capability
- For use with Generac 36 kW and 48 kW liquid-cooled automatic standby generators
- Includes a block heater, step-by-step installation instructions and necessary mounting hardware
The Cold Weather Kits consist of a battery warmer that has a thermostat built-into the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. These kits are recommended for generators installed in regions where the temperature regularly falls below 32 degree F.
- When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability
- 120-Volt
- 80-Watt
- 0.67 Amp
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
The Cold Weather Kit consists of a battery warmer that has a thermostat built-into the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. These kits are recommended for generators installed in regions where the temperature regularly falls below 32 F. When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability.
- Helps your generator maintain an ideal battery temperature for quick startup
- Recommended for use in areas where the temperature drops below 32 degree F
- For use with Generac 25 kW and 30 kW liquid cooled automatic standby generators
- Includes a battery warmer with an automatically controlled thermostat
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
The Generac Maintenance Kit for Portable Generators helps you extend the life and maintain the performance of your generator. The kit's funnel will help you perform successful oil changes. Chamois, Stabile Sample. Sizes GP5000 through GP7500.
- Helps you extend the life and maintain the performance of your generator
- Includes an air filter
- Includes a spark plug
- Includes a stabil sample and chamois
- Click on the "more info" tab to download the specifications pdf to view the wattage requirement guide
The Air Cooled Scheduled Maintenance kits offer all the hardware necessary to perform a complete maintenance on our air cooled generators. Oil will need to be purchased separately based upon manufacturer recommendations listed below. Maintenance is recommended at every 200-hours or 2-years.
- Includes: 1 air filter 1 oil filter 1 AVR Filter (2) spark plug 1 oil funnel 1 chamois 1 reminder sticker
- Designed for the 20 kW Synergy and 15 kW EcoGen standby generators (999 cc engine)
- Keeps your generator running at optimum performance
- Oil not included
The spill box drain back kit allows fuel that was captured in the 5 Gal. spill box to be drained directly back into the fuel tank to avoid vapors. This kit is only used in conjunction with the 5 Gal. spill box. It is not used independently.
- Compatible with protector series diesel generators
- Includes all needed hardware
- Instructions included
- Easy to install
Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution or Nexus Controller. The 100 Amp open transition switch is available in single phase with a service equipment rated configurations. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
- Service rated generac automatic transfer switches are housed in an aluminum nema/ul type 3r enclosure, with electrostatically applied and baked powder paint
- Heavy-duty generac contactor is a UL recognized device, designed for years of service, the controller at the generator handles all the timing, sensing, exercising functions and transfer commands
- Used in tandem with smart management modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available
- Switch is covered by a 5-year limited warranty
- Long lasting beauty
This Battery warmer pad is compatible on Generac Air cooled generators manufactured from 2008-present. Recommended for use in colder climates. This pad warmer rests under the battery.
- Not necessary for use with AGM-style batteries
- Remove old components before installing the new
- When installing any cold weather kit, it is required that the oil be replaced with 5W-30 synthetic
- Also consider pairing with model 7102 oil heater cold weather accessory
A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations. Maintenance is recommended at every 200-hours or 2-years. Perform a complete maintenance on your Generic liquid-cooled generator with the Generac Liquid-Cooled Generator Scheduled Maintenance Kit. This kit is compatible with 2.4 l, 36 kW and 60 kW generators.
- Use to perform a complete maintenance on Generac liquid-cooled generators
- Designed for use with 2.4 l 36 kW and 60 kW generators
- Includes air filter, oil filter, 4 spark plugs, a spark plug wrench, oil funnel, chamois and reminder sticker
- Oil not included
- Oil funnel, chamois and reminder sticker included
The enclosure is the generator's first line of defense against the elements and it's important to keep it in good condition. Use the paint kit to touch up scratches and other damage to protect from future corrosion. Kits include the necessary paint to properly touch up a generator enclosure.
- Touch up the enclosure of your generator by using the Generac tan generator paint kit for 2007 models
- Use touch up paint to cover scratches and any damages on the enclosure for corrosion protection
- Designed for generators manufactured prior to April of 2008
- Includes 6 oz. spray can and 1/2 oz. touch-up bottle
The power inlet box is installed on the exterior of the house near your main electrical panel. Inside, it is hardwired to your manual transfer switch to restore power to your main electrical panel. When the power goes out, you simply connect one end of a power cord to your portable generator outlet. The other end is plugged into the power inlet box.
- 30 Amp, NEMA L14-30
- Raintight design even when the generator cord is connected
- NEMA 3R enclosure is rated for indoor or outdoor installation
- UL Listed
A powder coat painted, steel fuel fill drop tube is required in some municipalities to prevent sparking due to static electricity buildup, which can be caused by the fuel dropping into the tank from the fill area. The drop tube delivers fuel within 6 in. of the bottom of the tank, resulting in submerged filling. This increases the fuel delivery flow rate and reduces vapors, foam and potential tank evaporation.
- Compatible with protector series diesel generators
- Can be used with the 5 Gal. spill box
- Threads directly into the existing fuel fill NPT port
- Easy to install
A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Maintenance is recommended at every 200-hours or 2-years. If running in a dusty environment, more frequent maintenance may be required.
- Use to perform a complete maintenance on Generac air cooled generator
- For use with 7 kW, 410cc generator
- Includes an air filter, oil filter, spark plug, spark plug wrench, oil funnel, chamois and reminder sticker
- Oil must be purchased separately based upon manufacturer recommendations listed below
The cast iron, lockable fuel cap provides the ability to lock the fuel system. Locking the fuel cap will prevent unwanted fuel tampering or syphoning. The fuel cap is designed specifically for Protector Series Generators.
- Compatible with Generac protector series diesel generators
- Durable Cast Iron
- Fits most pad locks
- Easy to install
The Extreme Cold Weather Kits include the appropriate block heater, step by step installation instructions and all necessary mounting hardware for an extra degree of extreme weather protection. This kit is to be used in conjunction with the appropriate Cold Weather Kit that contains the necessary battery warmer assembly. If not done already, the oil must be replaced with the appropriate synthetic oil. It is important to note that it is recommended that an Authorized Dealer install the Extreme Cold Weather Kit as improper installation procedures can inhibit proper generator function.
- Provides an extra degree of weather protection
- Keeps a generator performing in harsh conditions
- Works in conjunction with a battery warmer to provide quick starting capability
- For use with Generac 25 kW and 30 kW liquid cooled automatic standby generators
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
Our heavy duty, all rubber power cords are the connecting link between the generator and a transfer switch via a power inlet box. All rubber cord stays flexible even in subzero temperatures. 50 ft. cord, 4 conductors 10-Gauge wire with L14-30 male + female ends. UL Listed.
- Connecting link between the generator and the power inlet box and/or transfer switch
- All rubber cord stays flexible even in subzero temperatures
- Molded ends provide greater reliability
- Male plug connects to generator and female end connects to power inlet box/transfer switch
- UL Listed
The enclosure is the generator's first line of defense against the elements and is important to keep in good condition. If the generator enclosure is scratched or damaged, it is important to touch up the paint to protect from future corrosion. These paint kits include the necessary paint to properly maintain or touch up a generator enclosure.
- Paint kit for 2008 Generac air-cooled generator model line up
- Paint color is gray
- Kit includes touch up bottle, touch up spray can and towel
- Please check with your sales representative to verify proper color coordination
The Generac 5720 maintenance kit is designed for the XP10000E and XG10000E portable generators. Scheduled maintenance is a necessity to ensure the long life and top performance of your portable generator. If your generator has been running for extended periods or has been stored for several months, it's a good idea to change the oil and fill the tank with fresh gasoline. Be sure to review your owner's manual for the suggested maintenance schedule. The maintenance kit includes: Air Filter, Oil Filter, Oil Funnel, Spark Plug, Fuel Stabilizer, and Chamois. Oil must be purchased separately.
- Tune-up kit keeps your generator running at optimum performance
- Generac portable generator maintenance kit is designed for XP10000E and XG10000E generators
- Contents: air filter, oil filter, oil funnel, spark plug, fuel stabilizer, and chamois
- Oil must be purchased separately, short description
The Cold Weather Kits for the Protector Series consist of a block heater with all necessary mounting hardware and a battery warmer with a thermostat built-in to the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. These kits are recommended for generators installed in regions where the temperature regularly falls below 32 degree F (0 degree C). When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability.
- Compatible with generic 30 kW protector series diesel generators
- Battery warmer: 120-Volt, 75-Watt, 0.63 Amp
- Instructions included
- Easy installation
E-stop allows for immediate fuel shutoff and generator shutdown in the event of an emergency. It is field mounted in the generator roof line above the control area for easy access. The E-stop will shut down the Generator without damaging the unit.
- Easy installation
- Resettable push button style
- Field installed
Specifically engineered to handle muddy or sandy water, the ST20S is powered by a 169cc engine that pumps up to 158 GPM. With features such as low-oil shut down, custom Easy Prime funnel design for quick and easy priming and a large fuel tank with integrated fuel gauge, its both durable and easy to use. Silicon carbide mechanical seal for long life.
- Powerful 169cc engine with low-oil shut down
- Easy prime custom funnel design with tethered priming cap for quick and easy priming
- Durable 1 frame to withstand the harsh environment
- Silicon carbide mechanical seal for long life
- Large 3 Gal. fuel tank with incorporated fuel gauge delivers approximately 5 hours runtime
- Onboard instructions with icons of key touch points make this pump easy to use
- Color-coded suction and discharge ports to ensure the correct hose connections blue = discharge, green = suction
- Easily pumps up to 158 GPM
The automatically controlled thermostat in the Generac Cold Weather Kit for Generac 3. 0 l, 4. 6 l, 5. 4 l and 6. 8 l Direct Drive Units activates the battery warmer when temperatures fall below an acceptable level. Helps your generator maintain an ideal battery temperature. The kit is made for use with Generac liquid-cooled automatic standby generators with 3. 0 l, 4. 6 l and 6. 8 l engines.
- Helps your generator maintain an ideal battery temperature for quick startup
- Recommended for use in areas where the temperature drops below freezing
- Thermostat activates the battery warmer when temperatures fall below an acceptable level
- For use with Generac liquid-cooled automatic standby generators with 3. 0 l, 4. 6. 5. 4 l and 6. 8 l engines
- Includes a battery warmer with an automatically controlled thermostat
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.
- Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
- Heavy-duty Generac contractor is a UL recognized device, designed for years of service
- Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
- 5 year limited warranty
The Generac Cold Weather Kit for Generac Liquid-Cooled Automatic Standby Generators with 4.2 l Engines consists of a battery warmer with an automatically controlled thermostat built-into the battery wrap. The kit helps your generator maintain an ideal battery temperature for quick startup. For use with Generac 36 kW and 48 kW liquid-cooled automatic standby generators with 4.2 l engines.
- Helps your generator maintain an ideal battery temperature for quick startup
- Recommended for use in areas where the temperature drops below freezing
- For use with Generac 36 kW and 48 kW liquid-cooled automatic standby generators with 4.2 l engines
- Includes a battery warmer with an automatically controlled thermostat
Some municipalities require the use of stainless steel fuel lines instead of the standard hoses provided with the diesel generator products. These stainless steel lines are fire resistant for additional safety. They are made specifically for Generac Protector Series Generators.
- Compatible with generic 30 kW protector series diesel generators
- Made with braided stainless steel
- Fire proof
- Easy installation
The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators installs easily with the included mounting hardware. The heater keeps your Generac automatic standby generator performing even in harsh weather conditions. The Extreme Cold Weather Kits include the appropriate block heater, step by step installation instructions and all necessary mounting hardware for an extra degree of extreme weather protection.
- Important to note that it is recommended that an authorized dealer install the extreme cold weather kit as improper installation procedures can inhibit proper generator function
- Kit is to be used in conjunction with the appropriate cold weather kit that contains the necessary battery warmer assembly, if not done already, the oil must be replaced with the appropriate synthetic oil
- Works in conjunction with a battery warmer to provide quick starting capability
- For use with Generac 70 kW and 150 kW liquid-cooled automatic standby generators with 6.8 l engines
- Includes a block heater, step-by-step installation instructions and necessary mounting hardware
- Click on the more info tab to download the specifications pdf to view the wattage requirement guide
Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations. Refer to the generator owner's manual for more information.
- Kit includes: air filter, oil filter, spark plug and wrench, oil funnel, chamois and reminder sticker
- Maintenance is recommended at every 200-hours or 2-years
- Scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met
- Running in a dusty environment, more frequent maintenance may be required, maintenance intervals may differ per model