The Generac Load Manager 50A is designed to optimize the performance of your generator during power outages by intelligently managing the load. These modules allow you to prioritize which appliances and systems receive power when your generator runs, ensuring essential devices stay powered while preventing overload. Overall you get more coverage with less when you use Generac's power load manager.

• Wire-free technology increased afford ability with wireless modules, lowering installation cost and providing the best whole-house generator option to fit any budget, smart management modules work with any home standby generator for flexibility with any standby solution
• Prioritize loads power items that are most important during an outage through customizable load priority selection and up to 8 modules per system can be used
• Load management features a lock out system, which permits blocking of specific loads only when using generator power, allowing for the important loads to be powered more often
• Externally visible LED status view load status without opening the electrical box for convenient management of power during an outage

The Generac 5719 maintenance kit is designed for the 410 cc engine portable generators. Scheduled maintenance is a necessity to ensure the long life and top performance of your portable generator. If your generator has been running for extended periods or has been stored for several months, it's a good idea to change the oil and fill the tank with fresh gasoline. Be sure to review your owner's manual for the suggested maintenance schedule. The maintenance kit includes: Air Filter, Oil Filter, Oil Funnel, Spark Plug, Fuel Stabilizer, and Chamois. Oil must be purchased separately.

• Helps you extend the life and maintain the performance of your portable generator
• Includes air and oil filters
• Includes a spark plug and a spark plug wrench
• Includes an oil funnel, stabil sample and chamois
• Oil funnel
• Chamois
• Stabil sample
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

Some municipalities require the use of stainless steel fuel lines instead of the standard hoses provided with the diesel generator products. These stainless steel lines are fire resistant for additional safety. They are made specifically for Generac Protector Series Generators.

• Compatible with Generac 15 kW and 20 kW protector series diesel generators
• Made with braided stainless steel
• Fire proof
• Easy installation

The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators is designed for use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines. The block heater works in conjunction with a battery warmer to provide quick starting capability. For use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines

• Provides an extra degree of weather protection
• Keeps a generator performing in harsh conditions
• Works in conjunction with a battery warmer to provide quick starting capability
• For use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines
• Includes a block heater, step-by-step installation instructions and necessary mounting hardware
• Click on the "more info" tab to download the specifications pdf to view the wattage requirement guide

The Cold Weather Kits consist of a battery warmer that has a thermostat built-into the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. These kits are recommended for generators installed in regions where the temperature regularly falls below 32 degree F.

• When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability
• 120-Volt
• 80-Watt
• 0.67 Amp
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

After 200-hours of use or 2-years of ownership, use the Generic 6 kW 530 cc EcoGen. Air-Cooled Generator Scheduled Maintenance Kit to perform complete maintenance. It keeps your generator running smooth.

• Use to perform complete maintenance on a Generac EcoGen air-cooled generator
• For use on a 6 kW, 530 cc generator
• Maintenance is recommended at every 200-hours of use or 2-years of ownership
• Kit includes an air filter, oil filter, 2 spark plugs, an oil funnel, chamois and a reminder sticker
• Oil not included

The Generac 5720 maintenance kit is designed for the XP10000E and XG10000E portable generators. Scheduled maintenance is a necessity to ensure the long life and top performance of your portable generator. If your generator has been running for extended periods or has been stored for several months, it's a good idea to change the oil and fill the tank with fresh gasoline. Be sure to review your owner's manual for the suggested maintenance schedule. The maintenance kit includes: Air Filter, Oil Filter, Oil Funnel, Spark Plug, Fuel Stabilizer, and Chamois. Oil must be purchased separately.

• Tune-up kit keeps your generator running at optimum performance
• Generac portable generator maintenance kit is designed for XP10000E and XG10000E generators
• Contents: air filter, oil filter, oil funnel, spark plug, fuel stabilizer, and chamois
• Oil must be purchased separately, short description

The automatically controlled thermostat in the Generac Cold Weather Kit for Generac 3. 0 l, 4. 6 l, 5. 4 l and 6. 8 l Direct Drive Units activates the battery warmer when temperatures fall below an acceptable level. Helps your generator maintain an ideal battery temperature. The kit is made for use with Generac liquid-cooled automatic standby generators with 3. 0 l, 4. 6 l and 6. 8 l engines.

• Helps your generator maintain an ideal battery temperature for quick startup
• Recommended for use in areas where the temperature drops below freezing
• Thermostat activates the battery warmer when temperatures fall below an acceptable level
• For use with Generac liquid-cooled automatic standby generators with 3. 0 l, 4. 6. 5. 4 l and 6. 8 l engines
• Includes a battery warmer with an automatically controlled thermostat
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

Generac 600 Amp non-service rated switches are compatible with the full 22-150 kW line of liquid cooled generators. The switches are open transition and are available in 120/240 single phase. When used in tandem with Smart Management Modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available.

• Compatible with all Generac 22-150 kW liquid-cooled models
• NEMA/UL 3R (indoor/outdoor rated) rugged steel enclosure
• Heavy-duty Generac contactor is a UL recognized device, designed for years of service
• Controller at the generator handles all the timing, sensing, exercising functions and transfer commands
• 5 year limited warranty

The Breather warmer is only for use in extreme cold weather applications where heavy icing occurs. For use on Generac Air Cooled units manufactured 2013 to present, not all Air cooled units. Also consider model 7101 Battery warmer and 7102 oil warmer cold weather accessories (compatible on both 50 Hz or 60 Hz units).

• Only compatible on 60 Hz units
• When installing any cold weather item, it is required that the oil be replaced with 5W-30 synthetic
• Remove the old component before installing the new
• All products come with a 1-year limited warranty

A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Maintenance is recommended at every 200-hours or 2-years. If running in a dusty environment, more frequent maintenance may be required.

• Use to perform a complete maintenance on Generac air cooled generator
• For use with 7 kW, 410cc generator
• Includes an air filter, oil filter, spark plug, spark plug wrench, oil funnel, chamois and reminder sticker
• Oil must be purchased separately based upon manufacturer recommendations listed below

The Generac Scheduled Maintenance Kit for Standby Generators with 1.6 l Engines helps you complete scheduled maintenance on your standby generator. Scheduled maintenance is crucial to keeping your Generac generator running smoothly. The kit included.

• Air and oil filters
• 4 spark plugs
• Reminder sticker
• Oil funnel
• Chamois

Scheduled maintenance is a necessity for all standby generators. The Protector Maintenance kits contain fuel, air and oil filters, a funnel and a chamois. Oil will need to be purchased separately based upon the recommendations listed. Maintenance for the fuel and oil filters is recommended at every 250-hours or 2-years and at 100-hours or 1-year for the air filter. If running in a dusty environment, more frequent maintenance may be required. Maintenance intervals may differ per model. Refer to the generator owner's manual for more information.

• Compatible with Generac 15 kW and 20 kW protector series diesel generators
• Includes all necessary hardware
• Instructions included
• Easy installation

The spill box drain back kit allows fuel that was captured in the 5 Gal. spill box to be drained directly back into the fuel tank to avoid vapors. This kit is only used in conjunction with the 5 Gal. spill box. It is not used independently.

• Compatible with protector series diesel generators
• Includes all needed hardware
• Instructions included
• Easy to install

Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.

• Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
• Heavy-duty Generac contractor is a UL recognized device, designed for years of service
• Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
• 5 year limited warranty

Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.

• Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
• Heavy-duty Generac contractor is a UL recognized device, designed for years of service
• Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
• 5 year limited warranty

Specifically engineered to handle muddy or sandy water, the ST20S is powered by a 169cc engine that pumps up to 158 GPM. With features such as low-oil shut down, custom Easy Prime funnel design for quick and easy priming and a large fuel tank with integrated fuel gauge, its both durable and easy to use. Silicon carbide mechanical seal for long life.

• Powerful 169cc engine with low-oil shut down
• Easy prime custom funnel design with tethered priming cap for quick and easy priming
• Durable 1 frame to withstand the harsh environment
• Silicon carbide mechanical seal for long life
• Large 3 Gal. fuel tank with incorporated fuel gauge delivers approximately 5 hours runtime
• Onboard instructions with icons of key touch points make this pump easy to use
• Color-coded suction and discharge ports to ensure the correct hose connections blue = discharge, green = suction
• Easily pumps up to 158 GPM

The Generac Cold Weather Kit for Generac Liquid-Cooled Automatic Standby Generators with 1.6 l Engines helps your automatic standby generator maintain an ideal battery temperature. The kit is recommended for use in areas where the temperature drops below 30 degree F. For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators.

• Helps your generator maintain an ideal battery temperature for quick startup
• Recommended for use in areas where the temperature drops below 30 degree F
• For use with Generac 25 kW and 30 kW liquid-cooled automatic standby generators
• Includes a battery warmer with an automatically controlled thermostat

The battery warmer of the Generac Cold Weather Kit for Liquid-Cooled Automatic Standby Generators with 2.4 l Engines activates when temperatures fall below an acceptable levels. Helps your generator maintain great performance. The kit is designed for use with Generac 22 kW, 27 kW, 36 kW, 45 kW and 60 kW air-cooled automatic standby generators.

• Helps your generator maintain an ideal battery temperature for quick startup
• Battery warmer activates when temperatures fall below an acceptable level
• Recommended for use in areas where the temperature drops below freezing
• For use with Generac 22 kW, 27 kW, 36 kW, 45 and 60 kW air-cooled automatic standby generators with 2.4 l engines
• Includes a battery warmer with an automatically controlled thermostat built-into the battery wrap
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

The 5 Gal. spill box screws into the existing fuel fill port of the base tank. It captures and contains fuel if over fueling or spilling occurs during the fill process. Its rugged, weatherproof enclosure is comprised of powder painted steel and pipe. It features a cover latch that can be locked for security.

• Compatible with Protector Series diesel generators
• Steel enclosure
• Lockable cover latch
• Easy to install

Scheduled maintenance is a necessity for all standby generators. The Protector Maintenance kits contain fuel, air and oil filters, a funnel and a chamois. Oil will need to be purchased separately based upon the recommendations listed. Maintenance for the fuel and oil filters is recommended at every 250-hours or 2-years and at 100-hours or 1-year for the air filter. If running in a dusty environment, more frequent maintenance may be required. Maintenance intervals may differ per model. Refer to the generator owner's manual for more information.

• Compatible with Generac 50 kW protector series diesel generators
• Includes all necessary hardware
• Instructions included
• Easy installation

The Air Cooled Scheduled Maintenance kits offer all the hardware necessary to perform a complete maintenance on our air cooled generators. Oil will need to be purchased separately based upon manufacturer recommendations listed below. Maintenance is recommended at every 200-hours or 2-years.

• Includes: 1 air filter 1 oil filter 1 AVR Filter (2) spark plug 1 oil funnel 1 chamois 1 reminder sticker
• Designed for the 20 kW Synergy and 15 kW EcoGen standby generators (999 cc engine)
• Keeps your generator running at optimum performance
• Oil not included

The Extreme Cold Weather Kits include the appropriate block heater, step by step installation instructions and all necessary mounting hardware for an extra degree of extreme weather protection. This kit is to be used in conjunction with the appropriate Cold Weather Kit that contains the necessary battery warmer assembly. If not done already, the oil must be replaced with the appropriate synthetic oil. It is important to note that it is recommended that an Authorized Dealer install the Extreme Cold Weather Kit as improper installation procedures can inhibit proper generator function.

• Provides an extra degree of weather protection
• Keeps a generator performing in harsh conditions
• Works in conjunction with a battery warmer to provide quick starting capability
• For use with Generac 25 kW and 30 kW liquid cooled automatic standby generators
• Click on the more info tab to download the specifications pdf to view the wattage requirement guide

Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.

• Housed in an aluminum NEMA / UL type 3R enclosure, with electrostatically applied powder coating
• Heavy-duty Generac contractor is a UL recognized device, designed for years of service
• Controller at the generator handles all the timing, sensing, exercising functions, and transfer commands
• 5 year limited warranty