For burial of water line valves, sprinkler valves, etc. Green cover overlaps the body so dirt and grass will not get in between the body and lid. Box is 10 in. High and Pipe slot is 2-1/8 in. x 3 in. Overlapping Snap on lid and finger lift holes. Body measures 10 in. Deep, Top opening is 9-1/8 in. and Bottom opening is 11-5/8 in.

• 10 in. round valve box
• 10 in. tall
• 9-1/8 in. top opening
• 11-5/8 in. bottom opening
• Covers cut off valves
• Covers clean outs
• Overlapping lid
• 2-finger holes
• Easy snap on lid
• Lip on the bottom of the body for sturdy burial

The #1 selling commercial grade pop-up sprinklers in the world, Rain Bird 1800 Series sprinkler heads provide unmatched reliability in all climates and soil types. Among superior performance features is a patented co-molded wiper seal that clears debris at pop-down and, together with a strong stainless steel internal spring, ensures positive stem retraction and a tight seal season after season. Designed to withstand any weather environment, this sprinkler can be used in a wide range of climates and locations.

• Adjustable spray distance
• Directional adjustment feature lets you aim spray head by hand
• No tools needed to change nozzle and screen
• 1/2 in. female threaded inlet
• Heavy-duty design for longest life
• #1 Best Selling sprinkler in the world
• 4 inch pop-up height
• Heavy-duty stainless-steel spring helps ensure flush retracion every time
• Patented pressure-activated wiper seal prevents wasteful water leakage and helps assure long life
• Total satisfaction policy

This residential and light commercial grade in-line valve replaces Rain Bird and other irrigation valves installed below ground with 1 in. female threaded inlet and outlet. It can be used with any 24 volt AC irrigation timer. Its unique reverse-flow design helps prevent flooding in the event of internal diaphragm failure, keeping the valve closed and saving water. This valve can be applied with all types of watering devices including Rain Bird spray heads (1800, 600), and rotors (22SA, 32SA, 42SA+, 52SA, LG3 and AG5). Use in-line valves in locations where the use of a pressure vacuum breaker (PVB) or a double-check valve is required by code to protect against backflow. Check your local codes to determine what type of valve is required. After installation and before startup, always the flush system of dirt and debris manually using the valve's external bleed screw.

• Reliable, non-clogging design
• Reverse Flow design reduces stress on diaphragm for dependable operation
• In-line design minimizes pressure loss of dirt and debris during installation and system start-up
• 24 VAC, 50/60 Hz automatic operation or manual activation with bleed screw
• Works with any standard sprinkler timer
• Designed for below-ground installation, out of sight and away from playful hands
• Energy efficient, low power encapsulated solenoid with captured plunger for long lasting dependability
• 1 inch female threaded inlet and outlet (use 1 inch MPT threaded pipe adapters with Teflon tape)
• Heavy duty construction
• Buna-N diaphragm offers superior performance in harsh water environments

Rain Bird RBY075S Drip Irrigation In-Line "Y" Filter, 3/4" x 3/4" Male Pipe Thread. Protect your downstream Drip irrigation components with this professional grade compact filtration unit. Reliable static filter helps prevent clogging of low-volume Drip irrigation system components. Cap with tight sealing O-ring unthreads to provide easy access to the 200 mesh stainless steel filter for cleaning. Robust body and cap constructed of glass-filled polypropylene for toughness and long life. Works with all types and brands of irrigation valves. 3/4" male pipe threaded (MPT) inlet and outlet for direct connection to valves and pressure regulators. Specifications: operating range 0.20 to 5.0 gallons per minute; inlet pressure 20 to 150 PSI. Rain Bird "The Intelligent Use of Water"

• Rain bird RBY075S drip irrigation in-line "Y" Filter, 3/4 in. x 3/4 in. male thread
• Keep your drip system flowing freely with proper filtration
• 3/4" male pipe thread inlet and outlet for connection to valves and pressure regulators
• 200 mesh (75 micron) screen
• Cap quickly unthreads providing easy access to filter element for cleaning
• Works with all types and brands of 3/4" irrigation valves
• Professional grade glass-filled polypropylene construction
• Long-lasting stainless steel filter element
• 150 psi pressure rating
• Total satisfaction policy

For Burial of Waterline or Sprinkler Valves. Snap In Green Lid with Black Lower Body. Extend To Any Depth By Use of 6 in. Plastic or Iron Pipe. 9 in. Depth, 6-1/4 in. Top opening, 7-1/2 in. bottom opening and 2-1/2 in. x 2-1/2 in. Pipe Slot. Ideal for covering shut off valves.

• 6 in. round
• 9 in. tall
• 6-1/4 in. opening on top
• 7-1/2 in. opening on bottom
• Covers a cut off valves
• Cover a sprinkler solenoid valve
• Access box
• Shut off valve cover
• Easy installation
• Blends in with grass and planter

Attach Melnor's QuickConnect Product Adapters to your existing nozzles, sprinklers, or watering wands to makes hose connections a snap. Spray off the deck with a nozzle or swap it out for a sprinkler when its time to water the lawn. Get a QuickConnect product adapter for each of your favorite tools, so they are ready to go whenever you need them. Works with Melnor 4MQC, Product Adapter with Water Stop feature.

• Adapts any watering tool with standard threads
• 1 required for each tool
• Sturdy construction
• Works with 3/4 in., 5/8 in. and 1/2 in. garden hoses

For burial of water line valves, sprinkler valves, etc. Plastic drop-in lid with snap lock tab. 10-1/4 in. Deep x 13-1/2 in. Top Opening 16-1/2 in. Bottom Opening. Pipe slot is 2-3/4 in. wide.

• 10 in. rectangular
• 10-1/4 in. tall
• 13-1/2 in. top opening
• 16-1/2 in. bottom opening
• Covers cut off valves
• Covers water meters
• 2-/34 in. pipe slots
• Flush fit lid
• 1-finger hole
• Flared lip on bottom of body

For burial of water line valves, sprinkler valves, water meters, etc. Black drop-in plastic reader lid cover with snap-lock tab. Hinged reading door lid is 4-1/2 in. x 7-1/2 in. The Box is 12 in. Deep x 15-1/2 in. Wide x 21 in. long at base. A Pipe slot on each end of box.

• 12 in. rectangular
• 12 in. tall
• 15-1/2 in. long top opening
• 10-1/4 in. wide top opening
• 19-3/8 in. x 14-5/8 in. bottom measurements
• Covers cut off valves
• Covers water meter
• Side slot on each end of box
• Flush fit reader lid
• Lockable lid

Rain Bird Waterproof Wire Connectors feature an easy to use, one-step installation to ensure a solid connection. Simply insert the wires and twist. The connectors are filled with silicone gel, so there is no mess or hassle with a grease tube. In addition, our durable connectors are protected with UV resistant materials and can withstand a 600 volt surge.

• Maximum voltage: 600-volt maximum building wire (1000-volt maximum signs or luminaries)
• Wire type: copper/copper, do not use on aluminum wire
• Wire range: minimum 22/maximum 12
• Temperature rating: 105 degree C (221 degree F)
• Silicone sealant: -45 degree F to 400 degree F

This professional grade Rain Bird 32SA rotor sprinkler features superior durability plus exceptional watering uniformity of patented Rain Curtain nozzle technology, resulting in a greener and more even lawn with reduced watering time. The rotor distributes larger water droplets that cover evenly throughout the pattern, also reducing wind-blown overspray. Nozzle micro ramps direct a portion of the spray near the head, adding gentle close-in coverage with reduced watering velocity that won't wash out new seed. Simple top adjustments for arc and distance help you keep water on the grass, not spraying on the house, sidewalk or driveway. The rotor also features a rugged dual-action, positive stop wiper seal that protects internals from debris and, together with a heavy duty stainless steel spring, assures positive retraction for leak-free performance. It installs on a standard 1/2 in. riser for simple replacement of older rotors.

• Convenient and economical 4-pack of Simple Adjust 32SA Gear Drive Rotors
• More effective close-in coverage solves problems with dry spots around the heads of your rotor zone
• Water lubricated, gear driven design is quiet and trouble-free
• Self-flushing at pop-down to clear debris and maintain spray efficiency
• Spray distance: 19-32 feet
• Easy to adjust arc from 40 to 360 degrees with just a screwdriver
• 4 In. pop up height to clear tall grass
• 1/2 In. female inlet threads
• A 3 gallon per minute nozzle comes pre-installed
• Dual action, positive stop wiper seal protects internals from debris and assures positive pop-up and retraction

The Rain Bird 1800 Series Professional Pop-Up Sprinkler is the #1 commercial-grade irrigation spray brand in the world. Installed in parks and yards across the globe it is chosen for its reliability, heavy-duty materials and versatility. Precision spray heads and nozzles customize your watering system to cover virtually any configuration of lawn or garden - not the sidewalk or driveway. The 1800 Series has first-rate quality built in for reliable operation and long life. This sprinklers Matched Precipitation Rate allows it to be used in any combination with other Rain Bird fixed and adjustable pattern sprays. Additional 1800 Series features include a heavy-duty stainless steel spring to assure flush retraction every time. An exclusive co-molded wiper seal provides unmatched resistance to grit, pressure and the environment. A tapered pop-up neck helps to assure retraction in all soil types. The pre-installed Half Pattern 180 degree nozzle can be adjusted downward in throw distance up to 25% simply by turning a screw on the top. Non-corrosive plastic and stainless steel construction provides a long life. A mesh filter screen protects the nozzle from clogging and maintains precise radius adjustment. No tools needed to change nozzles. Operates efficiently at low water pressure; 1/2" inlet size. Rain Bird Å“The Intelligent Use of Water"

• 4 inch Pop-up Sprinkler
• 1800 Professional Series
• Up to 15 feet spray distance
• 180 degree fixed pattern Dual Spray nozzle helps prevent dry spots at the base of the sprinkler
• Heavy-duty design for longest life
• #1 Best Selling sprinkler in the world
• 4 inch pop-up height
• 1/2 in. female threaded inlet
• Heavy-duty stainless-steel spring helps ensure flush retraction every time
• Patented pressure-activated wiper seal prevents wasteful water leakage and helps assure long life
• Total satisfaction policy

Rain Bird EFC25 Drip Irrigation Easy Fit Universal Coupling, Fits All 1/2", 5/8" and 0.7" Tubing. This unique Easy Fit compression fitting connects to all brands of 1/2" or 5/8" Drip irrigation tubing. Rain Bid's Easy Fit system involves simple push-together hand assembly that speeds installation. The finished connection is durable, leak-resistant and stays in place season after season. Constructed of highly durable UV and chemical-resistant materials to assure long life. Use with all Drip tubing brands of 0.63" to 0.7" O.D. Operating pressure: 0 to 60 PSI. Rain Bird "The Intelligent Use of Water"

• 1/2 in. Easy-Fit Coupling
• Universal coupler quickly connects two lengths of 1/2" Drip tubing in a straight line
• Easy-fit compression fittings accept any manufacturers O.D. tubing from 0.63" in. to 0.7" in.
• Fast and easy to install-making your installation project faster and easier
• Constructed of highly durable UV and chemical-resistant materials to assure long life
• Great for maintenance and retrofitting existing systems
• Quick tips; dip ends of tubing in warm water for a minute to soften up before inserting into fitting; let fitting sit in sun for a while to soften rubber gaskets inside prior to inserting tubing
• Operating pressure up to 60 psi
• Black color
• Total Satisfaction Policy

For systems that require a pump, K-Rain offers a full line of pump start relays for pumps up to 10 HP. Our pump start relay enclosures are constructed with a corrosion resistant, UV resistant, shockproof material. The rain-tight, secure, rustproof enclosure provides a safe and secure connection in a housing built to last.

• 3 HP at 100-Volt/5 HP at 220-Volt 24 coil
• Standard, rain tight, secure, rustproof enclosure-provides a safe and secure connection in an enclosure that will last a lifetime
• U.L. rated relay-ensures that the relays are approved for its intended use
• Large easy access enclosure-provides easy accessibility during wiring
• 2-year trade warranty-factory support up to 2-years after purchase
• Enclosure has 3-recessed knock-outs provides for easy connections
• 110 VAC or 24 VAC coils available- provides for a variety of applications up to 7.5 HP
• Constructed with a corrosion resistant
• Pump start relays are U.L. rated available to operate 2 HP up to 7.5 HP pump
• Contractor ratings (single phase) double, single throw inductive: 40 Amp resistive: 50 Amp

The RCW series is designed specifically for use on reclaimed water systems. The RCW rotors have heavy duty rubber purple covers to seal out dirt and increases product durability, positively identifies the use of reclaimed water reducing liability. RCW sprinkler products have pre-installed low angle nozzles to ensure correct trajectory of reclaimed water.

• 12 in. pop-up height
• Revolutionary patented easy arc-set simplified arc set allows for wet or dry adjustment in seconds
• 1/2 in. inlet-replaces all standard mini rotors and pop-up sprays
• Adjustable to 360 degree - provides a full range of adjustment from 40 degree to 360 degree
• Patented arc set degree markings - clearly indicates the current watering pattern and simplifies arc set adjustment
• Arc memory clutch - prevents internal gear damage and returns rotor to its prior setting automatically if nozzle turret is forced past its stop
• Time proven patented reversing mechanism - assures continuous reverse and return
• Ratcheting riser - allows for easy adjustment of your left starting position with a simple turn of the riser
• Pre-installed 1.5 GPM nozzle
• Purple cap indicates non-potable, reclaimed water application
• Distance - 18 ft. - 33 ft.

• Drip Irrigation uses up to 50% less water than conventional waterin methods and applies water at a slower rate to ensure even soil penetration
• Properly installed, a dripline system eliminates run-off and overspray common with conventional sprinklers and is an excellent irrigation alternative for non-turf areas such as shrub beds, parking lot medians and ground cover areas
• The durable poly tubing is manufactured with high quality resins which offers stress-cracking resistance, burst strength and flexibility
• The check valve feature prevents water from draining a lower elevations along the line and protects each drip emitter from siphoning sediment, small particles and debris at the end of each irrigation cycle

The Mini Pro Sprinkler is perfect for irrigating small lawn and landscape areas and saves water and money when used to replace spray heads. When considering the industry leading Mini Pro Sprinkler, think water efficiency. Now available in 3 popular heights, the Mini Pro brings flexibility to sprinkler system design.

• 4 in. pop-up height
• Revolutionary patented easy arc-set simplified arc set allows for wet or dry adjustment in seconds
• 1/2 in. inlet-replaces all standard mini rotors and pop-up sprays
• Adjustable to 360 - provides a full range of adjustment from 40 to 360
• Patented arc set degree markings clearly indicates the current watering pattern and simplifies arc set adjustment
• Time proven patented reversing mechanism assures continuous reverse and return
• Ratcheting riser allows for easy adjustment of your left starting position with a simple turn of the riser
• Rubber cover seals out dirt and increases product durability
• Optional check valve prevents low head drainage
• 5 Year Limited Warranty

The RCW series is designed specifically for use on reclaimed water systems. The RCW rotors have heavy duty rubber purple covers to seal out dirt and increases product durability, positively identifies the use of reclaimed water reducing liability. RCW sprinkler products have pre-installed low angle nozzles to ensure correct trajectory of reclaimed water.

• 4 in. pop-up height
• Direct replacement for PGP and PGP ultra fits right into the same can
• 3/4 in. (1,9 cm) inlet - replaces all standard rotors
• Flow control with patented intelligent flow technology - allows distance and water flow to be reduced simultaneously and proportionately - up to 50%
• Superior uniformity - saves water up to 30%
• Newly redesigned nozzles for advanced uniformity - eliminates dry spots and provides better zone performance while saving water
• Spray distance between 30 ft. - 40 ft. with pre-installed 2.5 GPM nozzle
• Rugged RPS family construction
• Adjustable to 360 degree - provides a full range of adjustment from 40 degree to 360 degree
• Purple cap indicates non-potable, reclaimed water application

For systems that require a pump, K-Rain offers a full line of pump start relays for pumps up to 10 HP. Our pump start relay enclosures are constructed with a corrosion resistant, UV resistant, shockproof material. The rain-tight, secure, rustproof enclosure provides a safe and secure connection in a housing built to last.

• 3 HP at 110-Volt/220-Volt 24-Volt coil
• Standard, rain tight, secure, rustproof enclosure-provides a safe and secure connection in an enclosure that will last a lifetime
• U.L. rated relay-ensures that the relays are approved for its intended use
• Large easy access enclosure-provides easy accessibility during wiring
• For irrigation systems that require a pump
• Enclosure has versatility installation - provides for easy connections
• Constructed with a corrosion, UV and flame retardant resistant shockproof material
• Factory support up to 2-years after purchase
• Suitable for use on a circuit capable of delivering not more than 5000 RMS symmetrical amperes, 240- Volt maximum, when protected by fuses or beakers rated maximum 100 Amp
• Use copper wire only

K-Rain's FN Series Fixed Pattern Female Nozzles deliver superior matched precipitation for the most popular arc settings. Carefully designed to provide superior coverage while minimizing wind drift. Our nozzles feature patterns with precise edges.

• Fixed half circle pattern - 8 ft. spray nozzle
• Color coded - allows for easy identifications
• Extra long filters provide longer time between cleanings
• Matched precipitation - allows for even water distribution
• Adjustable stainless steel screw reduces the radius by up to 25%
• 4 distances plus 8 fixed patterns
• Available in 8 ft., 10 ft., 12 ft. and 15 ft. with quarter, half, 3 quarter and full circle
• Perfect addition to K-Rain's durable pro S or RPS spray lines
• Female threaded nozzles fit any other male threaded spray body on the market
• FN series nozzles are the perfect solution for all standard spray applications

The name says it all: Pro performance and pro features on a smaller scale. That's why MiniPro is the best choice for small lawn and landscape areas. With a ½" inlet, the MiniPro is a gear-driven, rotary sprinkler that can replace all standard mini rotors and fixed zone pop-up sprays. The MiniPro has an arc adjustment of 40° to 360°. Adjusting that pattern is easy because of the top arc set degree indications and the spray direction arrow located on the sprinkler head. Simply insert a flat blade screwdriver into the arc adjustment slot and adjust as desired. The sprinkler can be adjusted wet or dry -- before installation and after installation with the water on or off. A purple collar is easily identified for reclaimed water use.

• Specifically for use on reclaimed water systems (RCW)
• Revolutionary Patented Top Arc Set - Simplified arc set allows for wet or dry adjustment in seconds
• 1/2" (1,3 cm) Inlet - Replaces all standard mini rotors and pop-up sprays
• Adjustable to 360° - Provides a full range of adjustment from 40° to 360°
• Patented Top Arc Set Degree Markings - Clearly indicates the current watering pattern and simplifies arc set adjustment
• Time Proven Patented Reversing Mechanism - Assures continuous reverse and return...over a 35-year history
• Ratcheting Riser - Allows for easy adjustment of your left starting position with a simple turn of the riser
• Rubber Cover - Seals out dirt and increases product durability
• Pre-installed #1.5 nozzle
• Nozzle Trajectory 25°

The MINIPRO Sprinkler is perfect for irrigating small lawn and landscape areas and saves water and money when used to replace spray heads. When considering the industry leading MINIPRO Sprinkler, think water efficiency. Now available in 3 popular heights, the MINIPRO brings flexibility to sprinkler system design.

• 12 in. pop-up height
• Revolutionary patented easy arc-set simplified arc set allows for wet or dry adjustment in seconds
• 1/2 in. inlet-replaces all standard mini rotors and pop-up sprays
• Adjustable to 360 degree - provides a full range of adjustment from 40 degree to 360 degree
• Patented arc set degree markings clearly indicates the current watering pattern and simplifies arc set adjustment
• Time proven patented reversing mechanism assures continuous reverse and return
• Ratcheting riser allows for easy adjustment of your left starting position with a simple turn of the riser
• Rubber cover seals out dirt and increases product durability
• Pre-installed 1.5 GPM nozzle
• Limited 5-year warranty

The K-Rain pressure compensating adjustable tree bubbler is ideal for tree and large shrub watering. Bubblers are small irrigation heads designed to bubble over and flood the ground surface around the tree or shrub. Pressure compensation ensures consistent flow rates over lower pressure ranges.

• Umbrella pattern
• Adjust flow and radius by turning outer cap
• Emits constant water to plants' root systems
• Prevents erosion and runoff
• Easy to install
• application: non-turf areas
• Operating pressure: 20 - 50 psi
• Inlet: 1/2 in. female thread
• Spacing: 1 ft. 3 ft.
• Flow rate: 1.36 - 5.9 GPM

Drip irrigation uses up to 50% less water than conventional watering methods and applies water at a slower rate to ensure even soil penetration. Properly installed, a dripline system eliminates run-off and overspray common with conventional sprinklers and is an excellent irrigation alternative for non-turf areas such as shrub beds, parking lot medians and ground cover areas. The durable poly tubing is manufactured with high quality resins which offers stress-cracking resistance, burst strength and flexibility. The check valve feature prevents water from draining a lower elevation along the line and protects each drip emitter from siphoning sediment, small particles and debris at the end of each irrigation cycle.

• Barbed drip elbow
• Easy push-together installation connects 2-pieces of tubing in an L shape
• High quality barbs grab tubing for a secure fit
• Unique barb design to reduce insertion force and still retain a secure fit
• For use with poly pipe
• High molecular weight linear polyethylene
• Great for running a line along a row of potted plants
• Connects 2-sections of tubing
• Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation
• Fitting is made of ABS, a type of plastic, treated with UV inhibitors to prevent cracking

SuperPro with Intelligent Flow Technology allows distance and water flow to be reduced simultaneously and proportionately. Patented Flow Control allows the reduction of distance while reducing the flow rate 50%. Water savings of up to 30% is achievable with this patented feature. SuperPro delivers matched precipitation, eliminates dry spots and provides better zone performance. Water flow can be turned off during nozzle installation or adjustment, with the riser remaining in popped-up position. Shrub Head Model.

• Revolutionary patented easy arc set - simplified arc set allows for wet or dry adjustment in seconds
• 2-in- 1 adjustable or continuous rotation - provides a full range of adjustment from 40 degree to continuous 360 degree
• Patented arc set degree markings - clearly indicates current watering pattern, simplifies arc set adjustment
• Arc memory clutch - prevents internal gear damage and returns rotor to its prior setting automatically if nozzle turret is forced out of adjustment
• Time proven patented reversing mechanism - assures continuous reverse and return, over a 35-year history
• Ratcheting riser - allows for easy adjustment of your left starting position with a simple turn of the riser
• Rubber cover - seals out dirt and increases product durability
• Shrub head model
• Rugged stainless steel spring - 0.093-Gauge 302 stainless steel spring extends the life of the rotor
• 5-year limited warranty

Drip Irrigation uses up to 50% less water than conventional water in methods and applies water at a slower rate to ensure even soil penetration. Properly installed, a dripline system eliminates run-off and overspray common with conventional sprinklers and is an excellent irrigation alternative for non-turf areas such as shrub beds, parking lot medians and ground cover areas. The durable poly tubing is manufactured with high quality resins which offers stress-cracking resistance, burst strength and flexibility. The check valve feature prevents water from draining a lower elevations along the line and protects each drip emitter from siphoning sediment, small particles and debris at the end of each irrigation cycle.

• 18 in. spacing
• Install above or below grade
• Pressure compensating emitters - ensure uniform output across the entire length of run
• Prevent drainage from the dripline when water pressure drops below 2.5 psi
• Eliminates run-off and overspray
• High quality resins which offers stress-cracking resistance
• Prevents water from draining at lower elevations along the line
• Trouble-free operation for non-turf area
• Check valve sealing pressure: 2.5 psi
• Check valve opening pressure: 4.3 psi

K-Rain's matched precipitation female nozzles are compatible with all available male threaded bodies. Carefully designed to provide superior coverage while minimizing wind drift. Our nozzles feature patterns with precise edges.

• Fixed half circle pattern - 12 ft. spray nozzle
• Color coded - allows for easy identifications
• Extra long filter provides longer time between cleanings
• Matched precipitation - allows for even water distribution
• Adjustable stainless steel screw reduces the radius by up to 25%
• 4 distances plus 8 fixed patterns
• Available in 8 ft., 10 ft., 12 ft. and 15 ft. with quarter, half, 3 quarter and full circle
• Perfect addition to K-Rain's durable pro S or RPS spray lines
• Female threaded nozzles fit any other male threaded spray body on the market
• FN series nozzles are the perfect solution for all standard spray applications

K-Rain's FN Series Fixed Pattern Female Nozzles deliver superior matched precipitation for the most popular arc settings. Carefully designed to provide superior coverage while minimizing wind drift. Our nozzles feature patterns with precise edges.

• Fixed 3 quarter circle pattern - 15 ft. spray nozzle
• Color coded - allows for easy identifications
• Extra long filter provides longer time between cleanings
• Matched precipitation - allows for even water distribution
• Adjustable stainless steel screw reduces the radius by up to 25%
• 4 distances plus 8 fixed patterns
• Available in 8 ft., 10 ft., 12 ft. and 15 ft. with quarter, half, 3 quarter and full circle
• Perfect addition to K-Rain's durable pro S or RPS spray lines
• Female threaded nozzles fit any other male threaded spray body on the market
• FN series nozzles are the perfect solution for all standard spray applications

K-Rain's FN Series Fixed Pattern Female Nozzles deliver superior matched precipitation for the most popular arc settings. Carefully designed to provide superior coverage while minimizing wind drift. Our nozzles feature patterns with precise edges.

• Fixed full circle pattern - 8 ft. spray nozzle
• Color coded - allows for easy identifications
• Extra long filters provide longer time between cleanings
• Matched precipitation - allows for even water distribution
• Adjustable stainless steel screw reduces the radius by up to 25%
• 4 distances plus 8 fixed patterns
• Available in 8 ft., 10 ft., 12 ft. and 15 ft. with quarter, half, 3 quarter and full circle
• Perfect addition to K-Rain's durable pro S or RPS spray lines
• Female threaded nozzles fit any other male threaded spray body on the market
• FN series nozzles are the perfect solution for all standard spray applications

The most cost-effective solution on the market. Our patented reversing mechanism, assures continuous reverse and return. The RPS75 RCW gear drive is high quality, durable and reliable sprinkler designed for use on reclaimed irrigation systems.

• 5,024 sq. ft. of coverage with pre-installed 3.0 GPM nozzle allows for water dispersal over a large area of grass.
• Right position start - rotor rotates counterclockwise from fixed right start position
• Full and part circle rotation provides a full range of adjustment from 40 - 360
• Non-flushing wiper seal - reduces leaks caused by debris trapped under seal
• 3/4 in. female threaded NPT inlet replaces all standard rotors
• Ideal for low flow applications
• Rubber cover seals out dirt and increases product durability
• Purple cap indicates reclaimed water is being used
• 4 in. pop-up height
• Spray distance adjusts between 36 ft. and 40 ft. with pre-installed 3.0 GPM nozzle

The Super Pro Rotor, with its patented flow shut-off, allows for easy range and flow adjustment and renders installations easier and drier. With a simple adjustment, you can shut off water flow at the head OR easily modify both flow and distance proportionally without changing nozzles. Super Pro has a patented Arc Memory Clutch that returns the rotor to its pre-set position. Designed for medium to large landscape areas. The Super Pro HP provides high-level-accuracy in a riser that pops up over your plant material. The Super Pro is packed with features that ensure reliability, saving the installer time, money and needless frustration.

• 12 in. pop-up height
• Water saving feature - easily adjust both water flow and distance proportionally and directly at the head
• Revolutionary patented easy arc set simplified arc set allows for wet or dry adjustment in seconds
• 3/4 in. female threaded NPT inlet-replaces all standard rotors
• 2n1 adjustable or continuous rotation-provides a full range of adjustment from 40 degree to a continuous, non-reversing circle
• Patented arc set degree markings - clearly indicates the current watering pattern and simplifies arc set adjustment
• Arc memory clutch - prevents internal gear damage and returns rotor to its prior setting automatically if nozzle turret is forced past its stop
• Time proven patented reversing mechanism - assures continuous reverse and return
• Ratcheting riser - allows for easy adjustment of your left starting position with a simple turn of the riser
• Rubber cover - seals out dirt and increases product durability
• Wide selection of nozzles - including standard and low angle, provides flexibility in system design
• Check valve prevents low head drainage

• Drip Irrigation uses up to 50% less water than conventional waterin methods and applies water at a slower rate to ensure even soil penetration
• Properly installed, a dripline system eliminates run-off and overspray common with conventional sprinklers and is an excellent irrigation alternative for non-turf areas such as shrub beds, parking lot medians and ground cover areas
• The durable poly tubing is manufactured with high quality resins which offers stress-cracking resistance, burst strength and flexibility
• The check valve feature prevents water from draining a lower elevations along the line and protects each drip emitter from siphoning sediment, small particles and debris at the end of each irrigation cycle

K-Rain's FN Series Fixed Pattern Female Nozzles deliver superior matched precipitation for the most popular arc settings. Carefully designed to provide superior coverage while minimizing wind drift. Our nozzles feature patterns with precise edges.

• Fixed half circle pattern - 15 ft. spray nozzle
• Color coded - allows for easy identifications
• Extra long filters provide longer time between cleanings
• Matched precipitation - allows for even water distribution
• Adjustable stainless steel screw reduces the radius by up to 25%
• 4 distances plus 8 fixed patterns
• Available in 8 ft., 10 ft., 12 ft. and 15 ft. with quarter, half, 3 quarter and full circle
• Perfect addition to K-Rain's durable pro S or RPS spray lines
• Female threaded nozzles fit any other male threaded spray body on the market
• FN series nozzles are the perfect solution for all standard spray applications

The Pro Sport Rotor is K-Rains next generation of professional rotor, designed specifically for sports turf applications. The Pro Sport comes standard with a unique triple nozzle. The triple nozzle configuration consists of a primary nozzle for long distance and two secondary nozzles for mid-range and short distance coverage. This nozzle design provides even water distribution. Pro Sport comes in a high speed version, ideal for quick wet downs and dust control. Available in plastic or the ever popular stainless steel.

• 4 in. pop-up height
• Revolutionary patented easy arc set simplified arc set allows for wet or dry adjustment in seconds
• Pre-installed 10 GPM triple nozzle configuration-ensures even distribution of water
• Two in one adjustable or continuous rotation-provides a full range of adjustment from 40 to a continuous full circle
• Patented arc set degree markings-clearly indicates the current watering pattern and simplifies arc set adjustment
• Arc memory clutch-prevents internal gear damage and returns rotor to its prior setting automatically if nozzle turret is forced past its stop
• Time proven patented reversing mechanism-assures continuous reverse and return
• Heavy duty rubber cover-seals out dirt and increases product durability
• Rubber mud guard-allows sprinkler to be installed below grade
• Factory installed check valve - prevents low head drainage
• 5 year limited warranty

Contemporary tilt diaphragm design makes the Pro Series 100 Valve the perfect choice for residential and commercial applications. This reliable valve offers a straight through flow pattern that dramatically reduces pressure loss and reduces the risk of trapped debris. It has both an internal bleed and external bleed in addition to optional flow control.

• Heavy duty, corrosion and UV resistant PVC construction - increases the life of the valve
• Combination 1 in. and 1 1/4 in. - provides the option to increase the pipe size to the valve increasing the flow rate
• Tilt diaphragm/piston assembly - allows for a straight flow path of the water increasing the flow rate while reducing the friction loss
• Debris tolerant design - provides flexibility for use in potable or dirty water applications
• Manual external bleed screw - provides for manual operation in system start up
• Manual internal bleed through solenoid - provides for manual operation without discharging water outside the valve
• Flow control with removable handle - allows for precise flow adjustment and manual shut off and allows you to remove the handle to prevent tampering
• Captured plunger solenoid - allows for easy removal when servicing without losing internal parts
• Self cleaning metering screen - screen is in the turbulent flow of the water allowing self cleaning action during operation
• 5-year limited warranty

The MiniPro Sprinkler is perfect for irrigating small lawn and landscape areas and saves water and money when used to replace spray heads. When considering the industry leading MiniPro sprinkler, think water efficiency. The MiniPro has a limited five year warranty.

• 6 in. pop-up height
• Revolutionary patented easy arc-set simplified arc set allows for wet or dry adjustment in seconds
• 1/2 in. inlet-replaces all standard mini rotors and pop-up sprays
• Adjustable to 360 degrees - provides a full range of adjustment from 40 to 360 degrees
• Patented arc set degree markings clearly indicates the current watering pattern and simplifies arc set adjustment
• Time proven patented reversing mechanism assures continuous reverse and return
• Ratcheting riser allows for easy adjustment of your left starting position with a simple turn of the riser
• Rubber cover seals out dirt and increases product durability
• Purple cap indicates reclaimed, non potable water is being used
• 5 year limited warranty

K-Rain's FN Series Fixed Pattern Female Nozzles deliver superior matched precipitation for the most popular arc settings. Carefully designed to provide superior coverage while minimizing wind drift. Our nozzles feature patterns with precise edges.

• Fixed full circle pattern - 15 ft. spray nozzle
• Color coded - allows for easy identifications
• Extra long filters provide longer time between cleanings
• Matched precipitation - allows for even water distribution
• Adjustable stainless steel screw reduces the radius by up to 25%
• 4 distances plus 8 fixed patterns
• Available in 8 ft., 10 ft., 12 ft. and 15 ft. with quarter, half, 3 quarter and full circle
• Perfect addition to K-Rain's durable pro S or RPS spray lines
• Female threaded nozzles fit any other male threaded spray body on the market
• FN series nozzles are the perfect solution for all standard spray applications

The double pop-up design delivers additional protection from dirt/particulate intrusion and harsh conditions. Reduce water usage up to 30% without sacrificing turf quality. Choose from 3 different distances: 13 ft. - 15 ft., 16 ft. - 19 ft., and 26 ft. - 30 ft.

• Fixed pattern 360 degree
• Coverage 13 in. - 15 in.
• Color- coded light green
• Durable design-molded with high-impact engineered resin for long life
• Superior uniformity-multi-stream technology provides outstanding coverage eliminating brown spots
• Matched precipitation - low precipitation rate is proportionate even after arc and radius adjustment
• Water smart technology- reduce water usage up to 30% without compromising on results
• Double pop-up design - delivers additional protection from dirt/particulate intrusion in harsh conditions
• Simple to adjust- easiest adjustment in the industry
• Mix and match with traditional rotors to cover small areas

The ProPlus RCW is packed with features that ensure reliability, saving the installer time, money and needless frustration. Set it and forget it. Our patented Arc Memory Clutch returns the rotor to its pre-set position. Designed for medium to large landscape areas. The purple cap indicates that reclaimed, non-potable water is being used.

• 5 in. riser - perfect for taller grass
• 3/4 in. female NPT inlet - replaces all standard rotors
• Revolutionary patented easy arc set simplified arc set allows for wet or dry adjustment in seconds
• 2-in-1 adjustable or continuous rotation - provides a full range of adjustment from 40 to a continuous circle
• Patented arc set degree markings - clearly indicates the current watering patter and simplifies arc set adjustment
• Arc memory clutch - prevents internal gear damage and returns rotor to its prior setting automatically if nozzle turret is forced past its stop
• Time proven patented reversing mechanism - assures continuous reverse and return
• Ratcheting riser - allows for easy adjustment of your left starting position with a simple turn of the riser
• Rubber cover - seals out dirt and increases product durability
• Pre-installed 3 GPM low angle nozzle
• Purple cap indicates reclaimed, non-potable water is being used
• No adjustment tool needed - use small flat blade screwdriver

The RPS75i line of rotors incorporates all of the features and benefits of the RPS75 and delivers even more. To reduce the radius and distance in other rotors on the market, the nozzle must be changed or the break-up screw must be used. With the RPS75i, a simple turn of the patented flow control regulates distance and water flow proportionately. Pre-installed 2.5 GPM nozzle.

• 5,024 sq. ft. of coverage allows for water dispersal over a large area of grass
• Spray distance - 18 - 40 ft. with pre-installed 2.5 GPM nozzle
• 3/4 in. inlet - replaces all standard rotors
• Flow control - reduce distance and flow rate proportionately conserving water
• Direct replacement for hunter PGP
• Right position start rotor rotates counterclockwise from fixed right start position
• Riser fits in existing hunter PGP cans simply unscrew the existing riser from the PGP can and replace with the RPS75 riser
• Full and part circle rotation provides a full range of adjustment from 40 degree to 360 degree
• Non-flushing wiper seal reduces leaks caused by debris trapped under seal
• Ideal for low flow applications
• Rubber cover seals out dirt and increases durability

K-Rain's matched precipitation female nozzles are compatible with all available male threaded bodies. Carefully designed to provide superior coverage while minimizing wind drift. Our nozzles feature patterns with precise edges.

• Center strip female thread nozzle - 4 ft. x 30 ft.
• Color coded - allows for easy identifications
• Extra long filters provide longer time between cleanings
• Matched precipitation - allows for even water distribution
• Adjustable stainless steel screw reduces the radius by up to 25%
• Female threaded nozzles fit any other male threaded spray body on the market
• FN series nozzles are the perfect solution for all standard spray applications
• Perfect addition to K-Rain's durable pro S or RPS spray lines
• Available in both 15 center strip and 15 end strip
• Superior coverage

• K-Rain's reliable 3/4 in. valve offers a straight-through flow pattern allows debris to move through and the turbulent water flow cleans the diaphragm filter screen
• This provides long life in applications using well or lake water
• It has both an internal bleed and external bleed screw in addition to optional flow control

The Pro Sport Rotor is K-Rain's next generation of professional rotor, designed specifically for sports turf applications. The Pro Sport comes standard with a unique triple nozzle. The triple nozzle configuration is used for mid-range and short distance coverage. This nozzle design provides even water distribution. Pro Sport comes in a high speed version, ideal for quick wet downs and dust control. Available in plastic or the ever popular stainless steel.

• 4 in. pop-up height - stainless steel riser
• Revolutionary patented easy arc set simplified arc set allows for wet or dry adjustment in seconds
• Pre-installed 10 GPM triple nozzle configuration-ensures even distribution of water
• 2-in-1 adjustable or continuous rotation-provides a full range of adjustment from 40 to a continuous full circle
• Patented arc set degree markings-clearly indicates the current watering pattern and simplifies arc set adjustment
• Arc memory clutch-prevents internal gear damage and returns rotor to its prior setting automatically if nozzle turret is forced past its stop
• Time proven patented reversing mechanism-assures continuous reverse and return
• Heavy duty rubber cover-seals out dirt and increases product durability
• Rubber mud guard-allows sprinkler to be installed below grade
• Factory installed check valve prevents low head drainage
• 5-year limited warranty

This reliable valve offers a straight through flow pattern that dramatically reduces pressure loss and reduces the risk of trapped debris. It has both an internal bleed and external bleed in addition to optional flow control. Heavy duty, corrosion and UV resistant PVC construction increases the life of the valve. Combination 1 in. and 1-1/4 in. provides the option to increase the pipe size to the valve increasing the flow rate. Tilt diaphragm-piston assembly allows for a straight flow path of the water increasing the flow rate while reducing the friction loss. Debris tolerant design provides flexibility for use in potable or dirty water applications.

• Heavy duty, corrosion and UV resistant PVC construction
• Allows for a straight flow path of water, increasing the flow rate while reducing friction loss
• Offers flexibility for use in potable or non-potable applications
• Provides for manual operation in system start up
• For residential applications
• Permits manual operation without discharging water outside valve
• No flow control
• Remove the solenoid without losing the internal plunger
• Screen is in flow path of water for self-cleaning action during operation
• Phillips head screwdriver or a slotted head screwdriver

A contemporary tilt diaphragm design makes the PROSERIES 100 Valve the perfect choice for residential and commercial applications. This reliable valve offers a straight through flow pattern that dramatically reduces pressure loss and reduces the risk of trapped debris. It has both an internal bleed and external bleed in addition to optional flow control.

• Heavy duty, corrosion and UV resistant PVC construction - increases the life of the valve
• Combination 1 in. and 1-1/4 in. - provides the option to increase the pipe size to the valve increasing the flow rate
• Tilt diaphragm/piston assembly - allows for a straight flow path of the water increasing the flow rate while reducing the friction loss
• Debris tolerant design - provides flexibility for use in potable or dirty water applications
• Manual external bleed screw - provides for manual operation in system start up
• Manual internal bleed through solenoid - provides for manual operation without discharging water outside the valve
• Flow control with removable handle - allows for precise flow adjustment and manual shut off and allows you to remove the handle to prevent tampering
• Captured plunger solenoid - allows for easy removal when servicing without losing internal parts
• Self cleaning metering screen - screen is in the turbulent flow of the water allowing self cleaning action during operation
• 5-year limited warranty

• The RCW series is designed specifically for use on reclaimed water systems
• The RCW rotors have heavy duty rubber purple covers to seal out dirt and increases product durability, positively identifies the use of reclaimed water reducing liability
• RCW sprinkler products have pre-installed low angle nozzles to ensure correct trajectory of reclaimed water

K-Rain KVF Female Thread Nozzles can be easily set (no tools required) at any angle from 0 degree to 360 degree , allowing sprinklers to be fine-tuned to exactly the precise pattern needed. KVF Nozzles' superior spray pattern ensures proper precipitation rates throughout the adjustment. KVF Nozzles are perfect for a-typical, hard-to-handle landscape shapes and walkways or irregularly shaped planter beds.

• Adjustable 10 ft. female thread spray nozzle
• Spray pattern adjusts between 0 - 360
• Extra long filters provides longer time between cleanings
• Adjustable stainless steel screw reduces the radius by up to 25%
• Color coded for easy identification during installation and maintenance
• Superior spray patterns
• Uniform water distribution
• Water efficient low flow rates
• Female threaded nozzles fit any other male threaded spray body on the market
• Choose from 8 ft., 10 ft., 12 ft., 15 ft. and 17 ft. (2,4; 3; 3,7; 4,6 and 5,2 m) configurations

This reliable valve offers a straight through flow pattern that dramatically reduces pressure loss and reduces the risk of trapped debris. It has both an internal bleed and external bleed in addition to optional flow control. Heavy duty, corrosion and UV resistant PVC construction increases the life of the valve. Combination 1 in. and 1-1/4 in. provides the option to increase the pipe size to the valve increasing the flow rate. Tilt diaphragm-piston assembly allows for a straight flow path of the water increasing the flow rate while reducing the friction loss. Debris tolerant design provides flexibility for use in potable or dirty water applications.

• Heavy duty, corrosion and UV resistant PVC construction
• Allows for a straight flow path of water, increasing the flow rate while reducing friction loss
• Offers flexibility for use in potable or non-potable applications
• Provides for manual operation in system start up
• For residential applications
• Permits manual operation without discharging water outside valve
• No flow control
• Remove the solenoid without losing the internal plunger
• Screen is in flow path of water for self-cleaning action during operation
• Phillips head screwdriver or a slotted head screwdriver can be used to adjust nozzle

This Pro series 150 2 in. model features a removable inlet cap to easily modify the configuration from globe to angle style. They also have a removable metering pin and external bleed screw promoting easy maintenance and manual operation. 5-year warranty.

• Heavy duty, corrosion and UV resistant PVC construction - increases the life of the valve
• External bleed screw with removable metering pin - allows for easy cleaning of the metering pin without disassembling the valve
• Manual external bleed screw - provides for manual operation in system start up
• Manual internal bleed through solenoid - provides for manual operation without discharging water outside the valve
• Captured plunger - allows for the solenoid to be removed without losing the internal plunger
• Removable inlet cap - allows for easy conversion from globe to angle - style valve
• Flow control - allows for precise flow adjustment and manual shut-off
• Heavy-duty santoprene diaphragm - unique design improves durability of diaphragm
• Model is the 2 in. (5 cm) female thread
• 5-year limited warranty