This drawer slide kit is constructed of steel tracks with plastic rollers, and it comes in a white powder coated finish. These tracks feature a self-closing design that commences at the final 2-1/2 in. from the end of the 19-3/4 in. long tracks when closing. The maximum load capacity for this kit is 75 lbs. and it fits most bottom/side-mounted drawer systems. This kit cannot be cut down to fit smaller drawer depths as it is designed with a positive stop at the ends of the fixed tracks, and because the rear rollers (11/16 in. Dia. wheels) on the sliding tracks are fastened to the ends of the drawer-mounted track pieces. These bottom mount drawer slides can be installed in drawer cabinets with face frames and without. If installing in drawer cabinet with face frame, Prime-Line's model number R-7240 (purchased separately) may be necessary if existing back plates are damaged. The clearance required between the drawer and the drawer opening for these types of slides is as follows: 1/2 in. on left and right sides, 1/4 in. at the bottom and 5/8 in. at the top. Installation instructions are included with each set, and they can also be found within the manufacturer's website.

• Used to replace damaged or missing drawer track hardware
• For use in 20 in. deep drawer cabinets
• White powder coated finish
• Steel tracks with flat plastic wheels
• 1 set includes hardware for one complete drawer
• For further dimensional information, please see the line drawing

This drawer slide kit is constructed of steel tracks with plastic rollers, and it comes in a white powder coated finish. These tracks feature a self-closing design that commences at the final 2-1/2 in. from the end of the 17-3/4 in. long tracks when closing. The maximum load capacity for this kit is 75 lbs. and it fits most bottom/side-mounted drawer systems. This kit cannot be cut down to fit smaller drawer depths as it is designed with a positive stop at the ends of the fixed tracks, and because the rear rollers (11/16 in. Dia. wheels) on the sliding tracks are fastened to the ends of the drawer-mounted track pieces. These bottom mount drawer slides can be installed in drawer cabinets with face frames and without. If installing in drawer cabinet with face frame, Prime-Line's model number R-7240 (purchased separately) may be necessary if existing back plates are damaged. The clearance required between the drawer and the drawer opening for these types of slides is as follows: 1/2 in. on left and right sides, 1/4 in. at the bottom and 5/8 in. at the top. Installation instructions are included with each set, and they can also be found within the manufacturer's website.

• Used to replace damaged or missing drawer track hardware
• For use in 18 in. deep drawer cabinets
• White powder coated finish
• Steel tracks with flat plastic wheels
• 1 set includes hardware for one complete drawer
• For further dimensional information, please see the line drawing

This kit is constructed of steel and plastic components and it includes all the parts necessary to repair 1 wooden drawer Track system. The track is constructed of a 22-5/8 in. galvanized steel monorail that can be cut down to size, the roller assemblies are constructed of steel brackets with plastic wheels, and the guide and back plate are constructed of galvanized steel. The roller assemblies are used to replace worn or missing guide buttons, allowing the drawers to glide easily when opening and closing, while at the same time preventing wear on the cabinet's face frame or drawer opening. These roller assemblies install into the inside lower left and right corners of the drawer face opening with necessary fasteners provided within each kit. This Track system has a maximum load rating of 20 lbs., and it is used by many to replace missing or malfunctioning drawer track hardware.

• Used to replace damaged or missing drawer tracks and guides
• Features a 22-5/8 in. track length
• Universal tri-roller system includes 2 rollers, a back plate, center track and roller
• Constructed of both galvanized steel and mold injected plastic components
• Requires a 1-1/4 in. top or bottom clearance for proper operation
• Has a maximum safe load of 20 lbs. for the Tri Toller system
• For further dimensional information, please see the line drawing

For Cabinet and Vanity Drawers. Exact replacement part. Specific size and specification.

• Made of steel
• Zinc plated
• Nylon wheel
• Exact replacement

Bi Fold Closet Door Hardware Part. Repair doors like new. Replace exact part needed.

• Exact original replacement
• For specific brand doors
• Not a universal fit all type part
• Makes your doors operate like new

This is a set of one pair of 21-3/4 in. white metal drawer slides for use in 22 in. D drawer cabinets. They have a maximum safe load capacity of 75 lbs. Easy to install with a few simple tools.

• Mating frame and drawer steel brackets
• Self lubricating rollers
• White powder coated finish
• Steel tracks with flat plastic wheels
• 1 Set includes hardware for one complete drawer
• For further dimensional information, please see the line drawing

This kit is constructed of steel and plastic components and it includes all the parts necessary to repair one wooden drawer track system. The track is constructed of a 22-1/2 inch piece of rolled-edge galvanized steel that can be cut down to size, the roller assemblies are constructed of steel brackets with plastic wheels, and the guides are constructed of white and purple plastic. The roller assemblies are used to replace worn or missing guide buttons, allowing the drawers to glide easily when opening and closing, while at the same time preventing wear on the cabinet's face frame or drawer opening. These roller assemblies install into the inside lower left and right corners of the drawer face opening with necessary fasteners provided within each kit. This kit is used by many to replace missing or malfunctioning drawer track hardware.

• Used to replace damaged or missing drawer tracks and guides
• 1 rolled edge steel drawer track 22-1/2 in. L
• 1 front plate 1 back plate 1 drawer guide
• Constructed of steel and plastic components
• 2 front rollers with screws
• For further dimensional information, please see the line drawing

Track for plastic cabinet drawer inserts. Replace as needed when replacing drawer insert. Made of plastic and metal.

• Provides extra strength with a plastic-coated metal track
• Provides smooth operation
• Replace plastic guide when replacing track if needed
• Triangle pacific brand

For Cabinet and Vanity Drawers. Exact replacement part. Specific size and specification.

• Made of steel
• Zinc plated
• Nylon wheel
• Exact replacement

This drawer insert will replace old worn out and damaged drawer inserts and are easy to install. It will replace the old style Triangle Pacific brand and other brand drawer inserts. When changing out the drawer insert, be sure to check the monorail track and plastic guides for replacement.

• Durable plastic
• Exact replacement
• Easy to install
• Coordinating drawer color

This is a purple plastic guide kit that aid in keeping your drawer aligned. Designed for use with a 3/32 in. x 1-3/16 in. metal track. Easily mounts to the back of your drawer for a much smoother operation.

• Includes guides and side saddles
• Fits a 3/32 in. x 1-3/16 in. track
• Plastic construction
• Purple colored guide
• White colored saddles
• For further dimensional information, please see the line drawing

These guides are constructed from brown plastic. They help in keeping your drawers aligned and make for a smoother operation. Fits tracks that are 1/4 in. x 7/8 in.

• Bulk pack includes guides only, fasteners and corner saddles not included
• Fits a 1/4 in. x 7/8 in. track
• Plastic construction
• Brown colored guide
• For further dimensional information, please see the line drawing

1-1/16 in. white plastic drawer guide side saddles. Saddles mount in the front corners of drawer opening to allow for smooth operation of drawers. Constructed of white plastic.

• Guides help keep drawer centered
• To reduce drawer binding
• Hammer required for installation
• Plastic construction
• Mounting hardware included
• 1/2 in. width
• 100 pieces per package

This kit is constructed of a wooden track, steel brackets and a plastic guide and back plate, together with all the parts necessary to repair one wooden drawer track system. This track restores smooth operation to track mounted drawers, and it can be used for top or bottom mount installations. This universal kit allows the 24 in. wooden track to be cut down to size to accommodate for shorter drawer applications. The white plastic saddles are used to replace worn or missing guide buttons, enabling the drawers to glide easily while at the same time preventing wear on the cabinet's face frame or drawer opening. This track system is used by many to replace missing or malfunctioning drawer track hardware.

• Used to replace damaged or missing drawer tracks and guides
• Universal hardware system fits most configurations
• 24 in. long track
• Constructed of wood, steel and plastic components
• Cut to size track
• For further dimensional information, please see the line drawing

This plastic backplate can be inverted for self-adjusting application. For use on Hat-section style track. Rolled edge and most other center mount tracks.

• Drawer Track Back Plate
• Plastic Construction
• Purple in color
• Guide length is 2-3/4 in.
• Mounts on the back of the cabinet to support the track
• For further dimensional information, please see the line drawing

This is a drawer track guide kit. The guides are used for aligning drawer and making for a smoother operation. Designed for use with metal, rolled-edge track.

• For use on rolled edge metal tracks with a 9/32 in. x 3/4 in.
• Helps to keep drawers aligned
• Mounts to the back of the drawer
• Red molded plastic
• Includes 2 guides and 4 side saddles
• All the necessary mounting hardware is included for a quick and easy installation
• A Phillips head screwdriver is required for Installation
• For further dimensional information, please see the line drawing