Strikes & Filler Plates
As the industry leader, Kwikset has provided trusted security for over 60-years and has become synonymous with security, peace of mind, style and innovation. Kwikset offers a wide variety of door hardware products. Including pocket door locks, designer roses and other hardware accessories to coordinate your entire home. Covered by Kwikset's lifetime mechanical and finish warranty.
- Kwikset model number 83796
- Available in 7 finishes
- Satin nickel finish
- 2.25 in. faceplate height
- 1.75 in. faceplate width
- Round corner
- Genuine Kwikset part
- Lifetime mechanical and finish warranty
2-1/8" X 1-1/8"
- Screws Furnished
- Primed
As the industry leader, Kwikset has provided trusted security for over 70-years and has become synonymous with security, peace of mind, style and innovation. The Satin Chrome finish gives the product a modern and minimalist look. Genuine Kwikset Part.
- T strike
- Kwikset model number 83028
- Available in 7 finishes
- 2.75 in. H
- 1.69 in. total W
- 1.125 in. W jamb
- Square corner
- Genuine Kwikset part
- Lifetime mechanical and finish warranty
This exterior plate is intended to work in conjunction with the Shield Security Single Sided-Deadbolt. This plate is to be used for doors that have holes bored fully through the door. The maximum diameter bore hole this replacement will cover is 2-1/8" wide.
- Replacement plate for Shield Security Single-Sided Deadbolts
- Fits doors between 1-3/8" to 1-3/4" thick
- Limited Lifetime Warranty
- Full Metal Construction
- Fits bore holes up to 2-1/8" in diameter
- Easy Installation
These Shield Security strike plates are constructed from zinc. This provides a durable product for years of use. They are powder coated to provide a quality finish that will match other hardware in your home. These strike plates replace most residential interior and exterior strikes.
- Easy Installation
- Limited Lifetime Warranty
- Full metal construction
- Powder Coated Finish
- Replaces standard door knob and door lever strike plates
- Shield Security Brand
This exterior plate is intended to work in conjunction with the Shield Security Single Sided-Deadbolt. This plate is to be used for doors that have holes bored fully through the door. The maximum diameter bore hole this replacement will cover is 2-1/8" wide.
- Replacement plate for Shield Security Single-Sided Deadbolts
- Fits doors between 1-3/8" to 1-3/4" thick
- Limited Lifetime Warranty
- Full Metal Construction
- Fits bore holes up to 2-1/8" in diameter
- Easy Installation
Tell Manufacturing Stainless-Steel Standard ASA Commercial Strike Plate is compatible with our commercial grade locksets. The strike is ANSI certified and comes with screws to install on metal door frames. This measures the standard size of 4-7/8 in. H x 1-1/4 in. W.
- ASA strike for metal door frames
- Stainless steel
- 3/32 in. T steel
- Includes installation screws
- Standard 4-7/8 in. H
- Works will all tell series locks
Covers up to 2-1/8" hole
- Standard 161 prep
- Order latch and frame fillers separately
- Available finishes: SL (silver coated)
Satin brass finish. Narrow stile, face plate 1-1/4" wide. Solid cast latch, cavity depth = 1/2", width = 1/2", height = 1-3/8". Heavy duty latch spring. Mortise type, backset 1-9/16" Deep. Fail secure, standard action unlocks when energized. Corrosion resistant, plated face and latch. 8-16 Ac voltage. Min. Order: 1 EA
These Shield Security strike plates are constructed from zinc. This provides a durable product for years of use. They are powder coated to provide a quality finish that will match other hardware in your home. These strike plates replace most residential interior and exterior strikes.
- Easy Installation
- Limited Lifetime Warranty
- Full metal construction
- Powder Coated Finish
- Replaces standard door knob and door lever strike plates
- Shield Security Brand
US Lock is the trusted wholesale distributor of choice for locksmiths and security professionals nationwide. We take pride in offering our customers the best service and overall value in the industry combined with a diverse, high-quality selection of more than 10,000 exclusively branded products. We carry more than 16,000 convenience products designed to save you time and money. Our staff has been serving the needs of security professionals for nearly 40-years.
- Fits US Lock 2010/2050/2050C series product
- Full lip strike
- Finish: US10B oil rubbed bronze
- Combination screws for wood or metal doors and frames
- With adjustable tab
- Limited lifetime warranty
As the industry leader, Kwikset has provided trusted security for over 70-years and has become synonymous with security, peace of mind, style and innovation. The Satin Chrome finish gives the product a modern and minimalist look. Genuine Kwikset Part.
- ASA-1 T Strike
- Kwikset model number 83846
- Available in 7 finishes
- 4.88 in. H
- 1.88 in. total width
- 1.25 in. jamb width
- Square corner
- Genuine Kwikset part
- Lifetime mechanical and finish warranty
This is a strike. The main material is steel. The strike is mainly used in decorative.
- Length of strike is 280.5 mm
- Strike has 9-screws
- Material of screws is steel
- Center of strike is 170 mm
- Color of strike is brass
- Strike has 9 holes
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Professional installation recommended
- 16 SEER Split System Heat Pump
- High-efficiency scroll compressor
- SmartShift technology to ensure quiet reliable defrost
- Factory-installed bi-flow liquid-line filter drier
- Factory-installed suction-line accumulator
- Factory-installed compressor crankcase heater
- Factory-installed high-capacity muffler
- High- and low-pressure switches
- Service valves with sweat connections and easy access to gauge ports
- Copper tube/enhanced aluminum fin coil
- Fully charged for 15' of tubing length
- Contactor with lug connection
- Ground lug connection
- AHRI Certified; ETL Listed
- Goodman brand sound control top design
- Steel louver coil guard
- Heavy-gauge galvanized-steel cabinet
- Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
- Top and side maintenance access
- Service ports and controls are accessible while unit is operating
- When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
- Cooling Capacity (BTU/h): 36000
- SEER/EER: 16/13
- Min. Circuit Amps: 19.1
- Max Fuse Size: 30
- Voltage: 197/253
- Liquid Line Size (IN): 3/8
- Suction Line Size (IN): 7/8
- Dimensions (WxDxH)
These Shield Security strike plates are constructed from zinc. This provides a durable product for years of use. They are powder coated to provide a quality finish that will match other hardware in your home. These strike plates replace most residential interior and exterior strikes.
- Easy Installation
- Limited Lifetime Warranty
- Full metal construction
- Powder Coated Finish
- Replaces standard door knob and door lever strike plates
- Shield Security Brand
This exterior plate is intended to work in conjunction with the Shield Security Single Sided-Deadbolt. This plate is to be used for doors that have holes bored fully through the door. The maximum diameter bore hole this replacement will cover is 2-1/8" wide.
- Replacement plate for Shield Security Single-Sided Deadbolts
- Fits doors between 1-3/8" to 1-3/4" thick
- Limited Lifetime Warranty
- Full Metal Construction
- Fits bore holes up to 2-1/8" in diameter
- Easy Installation
- Faceplate: 1-1/8" x 5-7/8"
- Die cast case
- Scratch & corrosion resistant faceplates
- Solid cast latch: Chrome plated
- Cavity depth: 1/2"; width: 5/8"; height: 1-1/8"
- Heavy-duty latch spring
- Mortise type - backset: 1-1/4" deep
- Voltage: 8-16VAC, 3-6VDC
- Fail secure - (standard action) unlocks when energized
US Lock is the trusted wholesale distributor of choice for locksmiths and security professionals nationwide. We take pride in offering our customers the best service and overall value in the industry combined with a diverse, high-quality selection of more than 10,000 exclusively branded products. We carry more than 16,000 convenience products designed to save you time and money. Our staff has been serving the needs of security professionals for nearly 40-years.
- Fits US Lock 2010/2050/2050C series product
- Full lip strike
- Finish: US3 bright brass
- Combination screws for wood or metal doors and frames
- With adjustable tab
- Limited lifetime warranty
The non-handed 9600 series Genesis is a windstorm-rated, surface-mounted electric strike designed to accommodate rim exit devices with a 3/4" throw latchbolt. All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation.Simply place the electric strike on the surface of the frame, align it with the exit latchbolt, and install. it is field selectable for fail secure and fail safe operation, as well as for 12VDC or 24VDC.Standard Features
- Belt measures 180 in. L x 1-1/2 in. W
- Designed to be completely waterproof
- Features 180 grit
- Can be used with copper, brass, or aluminum fittings
- Dynamic Strength: 70" per Pound
US Lock is the trusted wholesale distributor of choice for locksmiths and security professionals nationwide. We take pride in offering our customers the best service and overall value in the industry combined with a diverse, high-quality selection of more than 10,000 exclusively branded products. We carry more than 16,000 convenience products designed to save you time and money. Our staff has been serving the needs of security professionals for nearly 40-years.
- Fits US Lock 2010/2050/2050C series product
- T-strike
- Finish: US10B oil rubbed bronze
- Combination screws for wood or metal doors and frames
- Hardware included
- Limited lifetime warranty
This exterior plate is intended to work in conjunction with the Shield Security Single Sided-Deadbolt. This plate is to be used for doors that have holes bored fully through the door. The maximum diameter bore hole this replacement will cover is 2-1/8" wide.
- Replacement plate for Shield Security Single-Sided Deadbolts
- Fits doors between 1-3/8" to 1-3/4" thick
- Limited Lifetime Warranty
- Full Metal Construction
- Fits bore holes up to 2-1/8" in diameter
- Easy Installation
2-1/4" X 1"
- Screws Furnished
- Primed
The Von Duprin 5100-3FP Electric Strike is a tamper-resistant strike made tough with heavy-duty construction. With a single solenoid and dual-voltage power, the 5100 Electric Strike is equipped for long-lasting use, carefully tested for over one million cycles. Coupled with its hold strength hold of 1300 lbs., the 5100 is ideally engineered for durability and dependability in commercial locations where security and durability are paramount.
- Internal 12/24 dual-voltage solenoid
- Adjustable keeper
- Fail-safe/fail-secure selectability
- 1300 lbs. holding strength
- Fewer return trips to the job site
- Heavy-duty construction
- Tamper resistant design
- Tested to over one million cycles
US Lock is the trusted wholesale distributor of choice for locksmiths and security professionals nation wide. We take pride in offering our customers the best service and overall value in the industry combined with a diverse, high-quality selection of more than 10,000 exclusively branded products. We carry more than 16,000 convenience products designed to save you time and money. Our staff has been serving the needs of security professionals for nearly 40-years.
- Fits US Lock 2010/2050/2050C/3000 series product
- ASA strike
- Finish: US10B oil-rubbed bronze
- Combination screws for wood or metal doors and frames
- Hardware included
- Limited lifetime warranty
These standard latch strikes are constructed of steel and come in a brass plated finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 inch fasteners included with each package. These latch strikes are used by many to replace most residential interior and exterior door strikes. Adjustment tip: to eliminate the loose rattling of a closed door, remove the strike plate and bend the tab slightly with a pair of pliers, adjusting left to right as necessary.
- Used as a standard latch strike that features an adjustable tab designed to eliminate door slop and chatter of closed doors
- Dimensions are 1-7/16 inch wide x 2-1/4 inch tall with mounting holes that are 1-5/8 inch on center
- Comes in a bright brass plated finish
- Constructed of stamped steel
- All necessary mounting hardware is included for a quick and easy installation
- Please refer to the line art for dimensions and compare with your needs before ordering
This exterior plate is intended to work in conjunction with the Shield Security Single Sided-Deadbolt. This plate is to be used for doors that have holes bored fully through the door. The maximum diameter bore hole this replacement will cover is 2-1/8" wide.
- Replacement plate for Shield Security Single-Sided Deadbolts
- Fits doors between 1-3/8" to 1-3/4" thick
- Limited Lifetime Warranty
- Full Metal Construction
- Fits bore holes up to 2-1/8" in diameter
- Easy Installation
Trine EN Series Electric Strikes, 24 VDC, For Gate Locks W/ 3/4" Throw, LH. For Rim Exit Device Gate Locks With 3/4" Throw. 2000 Pounds. 24 Vdc. .15a @ 24 Vdc. 164 Ohms @ 24 Vdc. Fail Safe/Fail Secure. For Exterior Metal/Wood Doors. 1-1/4" X 4-7/8" Faceplate Dimensions X 1-11/16" Depth. Mfg #EN400RP-24DC-32D-LH
- For Rim Exit Device Gate Locks With 3/4" Throw
- 2000 Pounds
- 24 Vdc
- .15a @ 24 Vdc
Trine 00 Series Electric Strikes, 8-16 VAC/4-6 VDC, For 5/8" Throw, 696. For Locksets Having 5/8" Throw. 1000 Pounds. 8-16 Vac/4-6 Vdc. 1.3-2.7a @ 8-16 Vac/4-6 Vdc. 1.4 Ohms @ 8-16 Vac/4-6 Vdc. Fail Secure. For Interior/Exterior Metal/Wood Doors. 1-1/4" X 5-7/8" Faceplate Dimensions X 1-1/2" Depth. Mfg #001-8-16AC/4-6DC
- For Locksets Having 5/8" Throw
- 1000 Pounds
- 8-16 Vac/4-6 Vdc
- 1.3-2.7a @ 8-16 Vac/4-6 Vdc
Brass Plated High-Security Deadbolt Strike, Package Of 5. Brass Plated. Heavy Gauge Steel Plate 1-1/4" X 3-5/8 In. Used With Most Entry Doors. 4 Screws For Extra Holding Power. 3" Long Screws Fasten Deep Into Wall Stud For Increased Holding Strength. Mfg #MP2235-5
- Brass Plated
- Heavy Gauge Steel Plate 1-1/4" X 3-5/8 In
- Used With Most Entry Doors
- 4 Screws For Extra Holding Power
Prime-Line NICKEL Plated High Security Deadbolt Strike, Package Of 2. Heavy Gauge Stamped Steel. Extra Long Screws Attach To Framing Stud. Used With Most Entry Doors. Nickel Plated Finish. 3 Long Screws Fasten Deep Into Wall Stud For Increased Holding Strength. Package Of 2. 5.5 In. x 4 In. x 0.5 In. Designed for Use with Deadbolt Door Locks On Hinged Swinging Doors. Features Industry Standard Design Features and Includes all Installation Fasteners. Easy to Install with Only a Few Simple Tools. Mfg #MP2292
- Heavy Gauge Stamped Steel
- Extra Long Screws Attach To Framing Stud
- Used With Most Entry Doors
- Nickel Plated Finish
The EN Series electric strike is an Outdoor and indoor strike. The strike has a 2000 lb holding force with the durability of 1,000,000 life cycles. Fail safe and fail secure on DC units. The 4200 electric strike has a 3 hours Class A fire rating. Mfg #EN400-12DC-RH-US32D
- Fail safe and fail secure on DC units.
- The 4200 electric strike has a 3 hours Class A fire rating.
- Package of 1
- Product Height: 2.500 Lbs.
7401 Electric Strikes with 4-7/8" faceplates are designed for Adams Rite deadlatches or cylindrical locksets with 1/2" to 5/8" latchbolt projection. For use in aluminum jambs and sites. Opens electrically under 35 lb of preload. Mfg #7401-121
- Pkg of 1
- Color: Dark Bronze
- Faceplate Size: 4-7/8"
- Product Height: 2.000
Sentry Srk And Keeper, 1in,Inswing, Ss. Replaces Missing Or Broken Strike And Keeper For Sliding Latches. Inswing Application For Throw Latch (Emergency Entrance). Fits On Square Edge 1 In. Posts. Satin Cast Stainless Steel. Ada Compliant. 1-1/2 In. Hole Centers. 2-1/2 In. X 1-7/8 In. For Further Dimensional Information, Please See The Line Drawing. Mfg #650-8635
- Replaces Missing Or Broken Strike And Keeper For Sliding Latches
- Inswing Application For Throw Latch (Emergency Entrance)
- Fits On Square Edge 1 In. Posts
- Satin Cast Stainless Steel
Sentry Srk, 1in, W/ Fasteners, Ss. Replaces Missing Or Broken Strike And Keeper For Sliding Latches. Satin Stamped Stainless Steel. Square Edge Post Application. 1-1/2 In. Mounting Holes. 2-15/16 In. X 2-1/2 In., 3/8 In. Offset. Fasteners Included. Easy To Install. For Further Dimensional Information, Please See The Line Drawing. Mfg #656-4011
- Replaces Missing Or Broken Strike And Keeper For Sliding Latches
- Satin Stamped Stainless Steel
- Square Edge Post Application
- 1-1/2 In. Mounting Holes
Electric Strike. Brushed Stainless Steel Finish. Mfg #L6505 32D
- Brushed Stainless Steel Finish
- Faceplate Size-5-7/8 in. X 1-1/8 in.
- Material-Stainless Steel
- TAA/BAA Compliant
Electric Strike. Brushed Stainless Steel Finish. Mfg #0161-08 32D
- Brushed Stainless Steel Finish
- Pack of 1
- Weight of the product is 2.000 lbs.
- TAA/BAA Compliant
7110 Electric Strike with 7-15/16" faceplate and 7111 Electric Strike with 10-1/4" faceplate are designed for Adams Rite deadlatches or cylindrical locksets with 1/2" to 5/8" latchbolt projection. For use in hollow metal, wood and aluminum door jambs. Mfg #7110 440652
- For use in hollow metal, wood and aluminum door jambs
- Product Finish in Satin Chrome
- Package Quantity 1
- Product Height :2.000 in.
Trine2000 Series Electric Strikes, 12 VDC, For 5/8" Throw. For Locksets Having 5/8" Throw. 900 Pounds. 12 Vdc. .20-.33a @ 12 Vdc. 60. Ohms @ 12 Vdc. Fail Secure. For Interior/Exterior Metal/Wood Doors. 1-1/4" X 5-7/8" Faceplate Dimensions X 1-11/16" Depth. Mfg #2001-12DC
- For Locksets Having 5/8" Throw
- 900 Pounds
- 12 Vdc
- .20-.33a @ 12 Vdc
Spacer For Aluminum Blade Stop Frames. Brushed Anodized Aluminum Finish. Mfg #SP-713 28
- Brushed Anodized Aluminum Finish
- Faceplate Size-9-3/8 in. X 1 in. X 5/8 in.
- Material-Aluminum
- Package Quantity-1
This Von Duprin 299F is a fire-rated strike for single door fire-rated rim exit devices and a top strike for vertical rod fire rated devices. Mfg #299F US32D
- a fire-rated strike for single door fire-rated rim exit devices and a top strike for vertical rod fire rated devices
- Product Height-0.75 in.
- Material-Stainless Steel
- Product Width-6 in.
Trine 4100 Series Fire Rated Electric Strikes, 12 VDC, For Locksets WO/Deadbolt. For Cylindrical And Mortise Locksets Without Deadbolt. 3250 Pounds. 12 Vdc. .240a @ 12 Vdc. 50. Ohms @ 12 Vdc. Fail Secure. Includes 4-Faceplates, Trim Skirt, Shims, Torx Screws. For Interior/Exterior Metal Doors. Mfg #4100 US32D
- For Cylindrical And Mortise Locksets Without Deadbolt
- 3250 Pounds
- 12 Vdc
- .240a @ 12 Vdc
Trine 00 Series Electric Strike, 12 VDC, 5/8" Throw. For Locksets Having 5/8" Throw. 1000 Pounds. 12 Vdc. .40a @ 12 Vdc. 30 Ohms @ 12 Vdc. Fail Secure. For Interior/Exterior Metal/Wood Doors. 1-1/4" X 5-7/8" Faceplate Dimensions X 1-1/2" Depth. Mfg #001C-12DC
- For Locksets Having 5/8" Throw
- 1000 Pounds
- 12 Vdc
- .40a @ 12 Vdc
Trine 3000 Series Electric Strikes, 12-24 VDC, For 5/8" Throw, Regulated Input. For Locksets Having 5/8" Throw. Regulated Input. 1500 Pounds. 12-24 Vac/Vdc. .715/.277a @ 12 Vac.743/.398a 12 Vdc. 13 Ohms @ 12 Vac/Dc. Fail Secure. Includes 2-3/4" Faceplate. Mfg #3234WLC-26D
- For Locksets Having 5/8" Throw
- Regulated Input
- 1500 Pounds
- 12-24 Vac/Vdc
Trine 2000 Series Electric Strikes, 16-24 VAC/DC, For 5/8" Throw. For Locksets Having 5/8" Throw. 900 Pounds. 16-24 Vac/Dc. .22-.33a @ 16-24 Vac, .32-.47a @ Vdc. 50. Ohms @ 16-24 Vac/Dc. Fail Secure. For Interior/Exterior Metal/Wood Doors. 1-1/4" X 4-7/8" Faceplate Dimensions X 1-11/16" Depth. Mfg #2012C-16-24AC/DC
- For Locksets Having 5/8" Throw
- 900 Pounds
- 16-24 Vac/Dc
- .22-.33a @ 16-24 Vac, .32-.47a @ Vdc
The 1006 series faceplate is perfectly designed for use with Mortise locksets with a 1" deadbolt with a deadlatch positioned below the latchbolt. Its operation is such that the electric strike will not release if the deadbolt is extended. The deadbolt is retracted during traffic hours and the latchbolt is retracted by the keeper, whereas the keeper returns to the locked position. The HM Series faceplate is to customize the functionality of the 1006 series electric strike. Mfg #HM 630
- Pack of 1
- Product weight is 0.500 lbs
- Product length is 5.000 ins.
- Non-Handed
Trine3000 Series Electric Strikes, 12 VDC, 5/8" Throw, US26D. For Locksets Having 5/8" Throw. 1500 Pounds. 12 Vdc. .480 @ 12 Vdc. 25. Ohms @ 12 Vdc. Fail Secure. Includes 2-3/4" Faceplate. For Interior/Exterior Wood Doors. Mfg #3234W-12DC-26D
- For Locksets Having 5/8" Throw
- 1500 Pounds
- 12 Vdc
- .480 @ 12 Vdc
Trine00 Series Electric Strike, 24 VDC, 5/8" Throw, 696 ,. For Locksets Having 5/8" Throw. 1000 Pounds. 24 Vdc. .19a @ 24 Vdc. 125.0 Ohms @ 24 Vdc. Fail Secure. For Interior/Exterior Metal/Wood Doors. 1-1/4" X 5-7/8" Faceplate Dimensions X 1-1/2" Depth. Mfg #001-24DC
- For Locksets Having 5/8" Throw
- 1000 Pounds
- 24 Vdc
- .19a @ 24 Vdc
Trine 2000 Series Electric Strike, 6-14 VAC/DC, 5/8" Throw, 696. For Locksets Having 5/8" Throw. 900 Pounds. 6-14 Vac/Dc. .22-.33a @ 16-24 Vac, .32-.47a @ Vdc. 50. Ohms @ 16-24 Vac/Dc. Fail Secure. For Interior/Exterior Metal/Wood Doors. 1-1/4" X 5-7/8" Faceplate Dimensions X 1-11/16" Depth. Mfg #2001-6-14AC/DC
- For Locksets Having 5/8" Throw
- 900 Pounds
- 6-14 Vac/Dc
- .22-.33a @ 16-24 Vac, .32-.47a @ Vdc