Strikes & Filler Plates
As the industry leader, Kwikset has provided trusted security for over 60-years and has become synonymous with security, peace of mind, style and innovation. Kwikset offers a wide variety of door hardware products. Including pocket door locks, designer roses and other hardware accessories to coordinate your entire home. Covered by Kwikset's lifetime mechanical and finish warranty.
- Kwikset model number 83796
- Available in 7 finishes
- Satin nickel finish
- 2.25 in. faceplate height
- 1.75 in. faceplate width
- Round corner
- Genuine Kwikset part
- Lifetime mechanical and finish warranty
As the industry leader, Kwikset has provided trusted security for over 70-years and has become synonymous with security, peace of mind, style and innovation. The Satin Chrome finish gives the product a modern and minimalist look. Genuine Kwikset Part.
- T strike
- Kwikset model number 83028
- Available in 7 finishes
- 2.75 in. H
- 1.69 in. total W
- 1.125 in. W jamb
- Square corner
- Genuine Kwikset part
- Lifetime mechanical and finish warranty
2-1/8" X 1-1/8"
- Screws Furnished
- Primed
This exterior plate is intended to work in conjunction with the Shield Security Single Sided-Deadbolt. This plate is to be used for doors that have holes bored fully through the door. The maximum diameter bore hole this replacement will cover is 2-1/8" wide.
- Replacement plate for Shield Security Single-Sided Deadbolts
- Fits doors between 1-3/8" to 1-3/4" thick
- Limited Lifetime Warranty
- Full Metal Construction
- Fits bore holes up to 2-1/8" in diameter
- Easy Installation
These Shield Security strike plates are constructed from zinc. This provides a durable product for years of use. They are powder coated to provide a quality finish that will match other hardware in your home. These strike plates replace most residential interior and exterior strikes.
- Easy Installation
- Limited Lifetime Warranty
- Full metal construction
- Powder Coated Finish
- Replaces standard door knob and door lever strike plates
- Shield Security Brand
These Shield Security strike plates are constructed from zinc. This provides a durable product for years of use. They are powder coated to provide a quality finish that will match other hardware in your home. These strike plates replace most residential interior and exterior strikes.
- Easy Installation
- Limited Lifetime Warranty
- Full metal construction
- Powder Coated Finish
- Replaces standard door knob and door lever strike plates
- Shield Security Brand
Satin brass finish. Narrow stile, face plate 1-1/4" wide. Solid cast latch, cavity depth = 1/2", width = 1/2", height = 1-3/8". Heavy duty latch spring. Mortise type, backset 1-9/16" Deep. Fail secure, standard action unlocks when energized. Corrosion resistant, plated face and latch. 8-16 Ac voltage. Min. Order: 1 EA
US Lock is the trusted wholesale distributor of choice for locksmiths and security professionals nationwide. We take pride in offering our customers the best service and overall value in the industry combined with a diverse, high-quality selection of more than 10,000 exclusively branded products. We carry more than 16,000 convenience products designed to save you time and money. Our staff has been serving the needs of security professionals for nearly 40-years.
- Fits US Lock 2010/2050/2050C series product
- Full lip strike
- Finish: US3 bright brass
- Combination screws for wood or metal doors and frames
- With adjustable tab
- Limited lifetime warranty
US Lock is the trusted wholesale distributor of choice for locksmiths and security professionals nationwide. We take pride in offering our customers the best service and overall value in the industry combined with a diverse, high-quality selection of more than 10,000 exclusively branded products. We carry more than 16,000 convenience products designed to save you time and money. Our staff has been serving the needs of security professionals for nearly 40-years.
- Fits US Lock 2010/2050/2050C series product
- T-strike
- Finish: US10B oil rubbed bronze
- Combination screws for wood or metal doors and frames
- Hardware included
- Limited lifetime warranty
Covers up to 2-1/8" hole
- Standard 161 prep
- Order latch and frame fillers separately
- Available finishes: SL (silver coated)
US Lock is the trusted wholesale distributor of choice for locksmiths and security professionals nationwide. We take pride in offering our customers the best service and overall value in the industry combined with a diverse, high-quality selection of more than 10,000 exclusively branded products. We carry more than 16,000 convenience products designed to save you time and money. Our staff has been serving the needs of security professionals for nearly 40-years.
- Fits US Lock 2010/2050/2050C series product
- Full lip strike
- Finish: US10B oil rubbed bronze
- Combination screws for wood or metal doors and frames
- With adjustable tab
- Limited lifetime warranty
As the industry leader, Kwikset has provided trusted security for over 70-years and has become synonymous with security, peace of mind, style and innovation. The Satin Chrome finish gives the product a modern and minimalist look. Genuine Kwikset Part.
- ASA-1 T Strike
- Kwikset model number 83846
- Available in 7 finishes
- 4.88 in. H
- 1.88 in. total width
- 1.25 in. jamb width
- Square corner
- Genuine Kwikset part
- Lifetime mechanical and finish warranty
The non-handed 9600 series Genesis is a windstorm-rated, surface-mounted electric strike designed to accommodate rim exit devices with a 3/4" throw latchbolt. All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation.Simply place the electric strike on the surface of the frame, align it with the exit latchbolt, and install. it is field selectable for fail secure and fail safe operation, as well as for 12VDC or 24VDC.Standard Features
- Belt measures 180 in. L x 1-1/2 in. W
- Designed to be completely waterproof
- Features 180 grit
- Can be used with copper, brass, or aluminum fittings
- Dynamic Strength: 70" per Pound
2-1/4" X 1"
- Screws Furnished
- Primed
This is a strike. The main material is steel. The strike is mainly used in decorative.
- Length of strike is 280.5 mm
- Strike has 9-screws
- Material of screws is steel
- Center of strike is 170 mm
- Color of strike is brass
- Strike has 9 holes
This exterior plate is intended to work in conjunction with the Shield Security Single Sided-Deadbolt. This plate is to be used for doors that have holes bored fully through the door. The maximum diameter bore hole this replacement will cover is 2-1/8" wide.
- Replacement plate for Shield Security Single-Sided Deadbolts
- Fits doors between 1-3/8" to 1-3/4" thick
- Limited Lifetime Warranty
- Full Metal Construction
- Fits bore holes up to 2-1/8" in diameter
- Easy Installation
US Lock is the trusted wholesale distributor of choice for locksmiths and security professionals nation wide. We take pride in offering our customers the best service and overall value in the industry combined with a diverse, high-quality selection of more than 10,000 exclusively branded products. We carry more than 16,000 convenience products designed to save you time and money. Our staff has been serving the needs of security professionals for nearly 40-years.
- Fits US Lock 2010/2050/2050C/3000 series product
- ASA strike
- Finish: US10B oil-rubbed bronze
- Combination screws for wood or metal doors and frames
- Hardware included
- Limited lifetime warranty
- Faceplate: 1-1/8" x 5-7/8"
- Die cast case
- Scratch & corrosion resistant faceplates
- Solid cast latch: Chrome plated
- Cavity depth: 1/2"; width: 5/8"; height: 1-1/8"
- Heavy-duty latch spring
- Mortise type - backset: 1-1/4" deep
- Voltage: 8-16VAC, 3-6VDC
- Fail secure - (standard action) unlocks when energized
US Lock is the trusted wholesale distributor of choice for locksmiths and security professionals nation wide. We take pride in offering our customers the best service and overall value in the industry combined with a diverse, high-quality selection of more than 10,000 exclusively branded products. We carry more than 16,000 convenience products designed to save you time and money. Our staff has been serving the needs of security professionals for nearly 40-years.
- Fits US Lock 2010/2050/2050C series product
- T-strike
- Finish: US32D brushed stainless
- Combination screws for wood or metal doors and frames
- Hardware included
- Limited lifetime warranty
These standard latch strikes are constructed of steel and come in a brass plated finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 inch fasteners included with each package. These latch strikes are used by many to replace most residential interior and exterior door strikes. Adjustment tip: to eliminate the loose rattling of a closed door, remove the strike plate and bend the tab slightly with a pair of pliers, adjusting left to right as necessary.
- Used as a standard latch strike that features an adjustable tab designed to eliminate door slop and chatter of closed doors
- Dimensions are 1-7/16 inch wide x 2-1/4 inch tall with mounting holes that are 1-5/8 inch on center
- Comes in a bright brass plated finish
- Constructed of stamped steel
- All necessary mounting hardware is included for a quick and easy installation
- Please refer to the line art for dimensions and compare with your needs before ordering
Tell Manufacturing Stainless-Steel Standard ASA Commercial Strike Plate is compatible with our commercial grade locksets. The strike is ANSI certified and comes with screws to install on metal door frames. This measures the standard size of 4-7/8 in. H x 1-1/4 in. W.
- ASA strike for metal door frames
- Stainless steel
- 3/32 in. T steel
- Includes installation screws
- Standard 4-7/8 in. H
- Works will all tell series locks
The Von Duprin 5100-3FP Electric Strike is a tamper-resistant strike made tough with heavy-duty construction. With a single solenoid and dual-voltage power, the 5100 Electric Strike is equipped for long-lasting use, carefully tested for over one million cycles. Coupled with its hold strength hold of 1300 lbs., the 5100 is ideally engineered for durability and dependability in commercial locations where security and durability are paramount.
- Internal 12/24 dual-voltage solenoid
- Adjustable keeper
- Fail-safe/fail-secure selectability
- 1300 lbs. holding strength
- Fewer return trips to the job site
- Heavy-duty construction
- Tamper resistant design
- Tested to over one million cycles
- Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
- Professional installation recommended
- 16 SEER Split System Heat Pump
- High-efficiency scroll compressor
- SmartShift technology to ensure quiet reliable defrost
- Factory-installed bi-flow liquid-line filter drier
- Factory-installed suction-line accumulator
- Factory-installed compressor crankcase heater
- Factory-installed high-capacity muffler
- High- and low-pressure switches
- Service valves with sweat connections and easy access to gauge ports
- Copper tube/enhanced aluminum fin coil
- Fully charged for 15' of tubing length
- Contactor with lug connection
- Ground lug connection
- AHRI Certified; ETL Listed
- Goodman brand sound control top design
- Steel louver coil guard
- Heavy-gauge galvanized-steel cabinet
- Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
- Top and side maintenance access
- Service ports and controls are accessible while unit is operating
- When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
- Cooling Capacity (BTU/h): 36000
- SEER/EER: 16/13
- Min. Circuit Amps: 19.1
- Max Fuse Size: 30
- Voltage: 197/253
- Liquid Line Size (IN): 3/8
- Suction Line Size (IN): 7/8
- Dimensions (WxDxH)
These Shield Security strike plates are constructed from zinc. This provides a durable product for years of use. They are powder coated to provide a quality finish that will match other hardware in your home. These strike plates replace most residential interior and exterior strikes.
- Easy Installation
- Limited Lifetime Warranty
- Full metal construction
- Powder Coated Finish
- Replaces standard door knob and door lever strike plates
- Shield Security Brand
This exterior plate is intended to work in conjunction with the Shield Security Single Sided-Deadbolt. This plate is to be used for doors that have holes bored fully through the door. The maximum diameter bore hole this replacement will cover is 2-1/8" wide.
- Replacement plate for Shield Security Single-Sided Deadbolts
- Fits doors between 1-3/8" to 1-3/4" thick
- Limited Lifetime Warranty
- Full Metal Construction
- Fits bore holes up to 2-1/8" in diameter
- Easy Installation
This exterior plate is intended to work in conjunction with the Shield Security Single Sided-Deadbolt. This plate is to be used for doors that have holes bored fully through the door. The maximum diameter bore hole this replacement will cover is 2-1/8" wide.
- Replacement plate for Shield Security Single-Sided Deadbolts
- Fits doors between 1-3/8" to 1-3/4" thick
- Limited Lifetime Warranty
- Full Metal Construction
- Fits bore holes up to 2-1/8" in diameter
- Easy Installation
This exterior plate is intended to work in conjunction with the Shield Security Single Sided-Deadbolt. This plate is to be used for doors that have holes bored fully through the door. The maximum diameter bore hole this replacement will cover is 2-1/8" wide.
- Replacement plate for Shield Security Single-Sided Deadbolts
- Fits doors between 1-3/8" to 1-3/4" thick
- Limited Lifetime Warranty
- Full Metal Construction
- Fits bore holes up to 2-1/8" in diameter
- Easy Installation
Prime-Line NICKEL Plated High Security Deadbolt Strike, Package Of 2. Heavy Gauge Stamped Steel. Extra Long Screws Attach To Framing Stud. Used With Most Entry Doors. Nickel Plated Finish. 3 Long Screws Fasten Deep Into Wall Stud For Increased Holding Strength. Package Of 2. 5.5 In. x 4 In. x 0.5 In. Designed for Use with Deadbolt Door Locks On Hinged Swinging Doors. Features Industry Standard Design Features and Includes all Installation Fasteners. Easy to Install with Only a Few Simple Tools. Mfg #MP2292
- Heavy Gauge Stamped Steel
- Extra Long Screws Attach To Framing Stud
- Used With Most Entry Doors
- Nickel Plated Finish
Trine 2000 Series Electric Strike, 6-14 VAC, 5/8" Throw. For Locksets Having 5/8" Throw. 900 Pounds. 6-14 Vac. .44-1.0a @ 6-14 Vac, .70-4.6a @ 6-14 Vdc. 8.5 Ohms @ 6-14 Vac/Dc. Fail Secure. For Interior/Exterior Metal/Wood Doors. 1-1/4" X 4-7/8" Faceplate Dimensions X 1-11/16" Depth. Mfg #2012C-6-14AC/DC
- For Locksets Having 5/8" Throw
- 900 Pounds
- 6-14 Vac
- .44-1.0a @ 6-14 Vac, .70-4.6a @ 6-14 Vdc
Electric Strike. Brushed Chrome Finish. Mfg #15BS-01 26D
- Brushed Chrome Finish
- Satin Chrome Color
- Wood Door Type
- Steel Material
Sentry Srk And Keeper, 1in,Inswing, Ss. Replaces Missing Or Broken Strike And Keeper For Sliding Latches. Inswing Application For Throw Latch (Emergency Entrance). Fits On Square Edge 1 In. Posts. Satin Cast Stainless Steel. Ada Compliant. 1-1/2 In. Hole Centers. 2-1/2 In. X 1-7/8 In. For Further Dimensional Information, Please See The Line Drawing. Mfg #650-8635
- Replaces Missing Or Broken Strike And Keeper For Sliding Latches
- Inswing Application For Throw Latch (Emergency Entrance)
- Fits On Square Edge 1 In. Posts
- Satin Cast Stainless Steel
Antique Brass High Security Deadbolt Strike, Package Of 2. Antique Brass Plated Steel. Extra Long Screws Anchor To Studs. Used With Most Entry Doors. Easy To Install. 3 Long Screws Fasten Deep Into Wall Stud For Increased Holding Strength. Mfg #MP2285
- Antique Brass Plated Steel
- Extra Long Screws Anchor To Studs
- Used With Most Entry Doors
- Easy To Install
Adams Rite 4000 Series MSDeadlock Strikes add aesthetics and finish to strike cutouts in jambs. The majority of Adams Rite MSdeadlocks are installed in metal construction where the strike cutout can be simply a slot in the jamb. However for aesthetic reasons or in the case of the MS4002 for added security many who specify the MS deadlock add one of these strikes. Mfg #MS4002-112 628
- Pkg of 1
- Material: Steel
- TAA/BAA Compliant
- Non Hazardous
Trine electric strike for cylindrical lock in satin brass color finish. For use in new or replacement installations in wood and metal jambs. For use with locksets having up to 5/8" throw based on 1/8" door gap. Mfg #1001-2B-14-24AC/DC
- Pack of 1
- Door Type Wood
- Faceplate Size 5-7/8"
- Non Hazardous
Trine 00 Series Electric Strike, 12 VDC, 5/8" Throw. For Locksets Having 5/8" Throw. 1000 Pounds. 12 Vdc. .40a @ 12 Vdc. 30 Ohms @ 12 Vdc. Fail Secure. For Interior/Exterior Metal/Wood Doors. 1-1/4" X 5-7/8" Faceplate Dimensions X 1-1/2" Depth. Mfg #001C-12DC
- For Locksets Having 5/8" Throw
- 1000 Pounds
- 12 Vdc
- .40a @ 12 Vdc
7431 Electric Strikes with 6-7/8" faceplates are designed for Adams Rite deadlatches or cylindrical locksets with 1/2" to 5/8" latchbolt projection. For use in aluminum jambs and stiles. Opens electrically under 35 lb of preload. Mfg #7431-130
- Product color-Satin Aluminum
- Faceplate Size-6-7/8 in.
- Package Quantity-1
- TAA/BAA Compliant
Electric Strike. Brushed Stainless Steel Finish. Mfg #7108-08D 32D
- Brushed Stainless Steel Finish
- Material-Stainless Steel
- Package Quantity-1
- TAA/BAA Compliant
Electric Strike. Brushed Stainless Steel Finish. Mfg #0161-05 32D
- Brushed Stainless Steel Finish
- Hollow Metal Door Type
- Stainless Steel Material
- Package of 1
Sentry Srk And Keeper, 1in, Outswing W/ Fasteners, Ss. Replaces Missing Or Broken Strike And Keeper For Sliding Latches. Used On Both Inswing And Out Swing Doors. Fit On A Square Edge Post. Satin Stamped Stainless Steel. 1-7/8 In. Mounting Hole Centers. 2-7/8 In. X 2 In. X 13/16 In. X 1-5/16 In. Fasteners Included. For Further Dimensional Information, Please See The Line Drawing. Mfg #656-9837
- Replaces Missing Or Broken Strike And Keeper For Sliding Latches
- Used On Both Inswing And Out Swing Doors.
- Fit On A Square Edge Post
- Satin Stamped Stainless Steel
The RCI 7105-05D-32D electric strike series are used with aluminum, cylindrical, centerline mortise lock and exit devices. These electric strikes allow installers to adjust the strike pivot horizontally for precise alignment and unique anti-vibration design prevents manipulation by vibration. Crossed wires are never a problem as the coil is non-polarity conscious. Mfg #7105-05D 32D
- Pkg of 1
- Faceplate Size: 5-7/8"
- Color: Stainless Steel
- TAA/BAA Compliant
Electric Strike. Brushed Stainless Steel Finish. Mfg #S65U 32D
- Brushed Stainless Steel Finish
- Pkg of 1
- Faceplate Size: 3 Sizes
- Color: Stainless Steel
Trine4200 Series Electric Strikes, 12 VDC, For Locksets WO/ Deadbolt. For Cylindrical And Mortise Locksets Without Deadbolt. 1500 Pounds. 12 Vdc. .240a @ 12 Vdc. 50. Ohms @ 12 Vdc. Fail Secure. Includes Dual Finshed Faceplate, Fasia And Trim Skirt. For Interior/Exterior Aluminum Doors. Mfg #4200CC-10B-32D
- For Cylindrical And Mortise Locksets Without Deadbolt
- 1500 Pounds
- 12 Vdc
- .240a @ 12 Vdc
Trine 01 Series Electric Strikes, 24 VDC, For 5/8" Throw, Solenoid Actuated. For Locksets Having 5/8" Throw. Solenoid Actuated. 1200 Pounds. 24 Vdc. .20a @ 24 Vdc. 119.0 Ohms @ 24 Vdc. Fail Secure. For Interior/Exterior Metal Doors. Mfg #012C-24DC
- For Locksets Having 5/8" Throw
- Solenoid Actuated
- 1200 Pounds
- 24 Vdc
The 74R1 series Electric Strike is specifically designed for rim exit devices with 3/4†Pullman type latchbolt. It provides remote electrical control and thus allowing door to open without actuation of the exit device. This is a semi-mortised strike for rim exit devices having 3/4" Pullman type bolts without auxiliary bolts. The electric strike opens electrically under 35 lb of preload. Mfg #74R1-121
- It provides remote electrical control and thus allowing door to open without actuation of the exit device
- This is a semi-mortised strike for rim exit devices having 3/4" Pullman type bolts without auxiliary bolts
- The electric strike opens electrically under 35 lb of preload
- Strike is specifically designed for rim exit devices with 3/4†Pullman type latchbolt
7130, 7131 Electric Strikes with 6-7/8" faceplates are designed for Adams Rite deadlatches or cylindrical locksets with 1/2" to 5/8" latchbolt projection. For use in aluminum jambs and stiles. Mfg #7130 310313
- Pkg of 1
- Faceplate Size: 6-7/8"
- Color: Dark Bronze
- Product Height: 2.000
The EN Series electric strike is an Outdoor and indoor strike. The strike has a 2000 lb holding force with the durability of 1,000,000 life cycles. Fail safe and fail secure on DC units. The 4200 electric strike has a 3 hours Class A fire rating. Mfg #EN400-12DC-RH-US32D
- Fail safe and fail secure on DC units.
- The 4200 electric strike has a 3 hours Class A fire rating.
- Package of 1
- Product Height: 2.500 Lbs.
Trine00 Series Electric Strikes, 8-16 VAC/4-6 VDC, 3/4" Throw, 652. For Surface Mount Locksets Having 3/4" Throw. 1000 Pounds. 8-16 Vac/4-6 Vdc. 1.3-2.7a @ 8-16 Vac/4-6 Vdc. 1.4 Ohms @ 8-16 Vac/4-6 Vdc. Fail Secure. For Interior/Exterior Metal/Wood Doors. 1-3/8" X 3-1/2" Faceplate Dimensions X 1-3/8" Depth. Mfg #S005C-8-16AC
- For Surface Mount Locksets Having 3/4" Throw
- 1000 Pounds
- 8-16 Vac/4-6 Vdc
- 1.3-2.7a @ 8-16 Vac/4-6 Vdc
Sentry Srk And Keeper, 3/4in,Inswing, Ss. Replaces Missing Or Broken Strike And Keeper For Sliding Latch. Inswing Application For Throw Latch (Emergency Entrance). Fits On Square Edge 3/4 In. Posts. Satin Cast Stainless Steel. Ada Compliant. 1-1/2 In. Hole Centers. 2-1/16 In. X 1-7/8 In. For Further Dimensional Information, Please See The Line Drawing. Mfg #650-8634
- Replaces Missing Or Broken Strike And Keeper For Sliding Latch
- Inswing Application For Throw Latch (Emergency Entrance)
- Fits On Square Edge 3/4 In. Posts
- Satin Cast Stainless Steel