Door Stops
The Everbilt Satin Nickel Spring Doorstop (5-Pack) helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door. Easy to install.
- Made of steel
- Satin nickel finish
- Screws included
- Attaches to baseboard
- Easy installation
- Satin nickel finish adds a beautiful touch to your home decor
The Everbilt Bright Brass Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door. Bright Brass (gold) finish.
- Made of steel
- Bright brass (gold) finish
- Screws included
- Attaches to baseboard
- Mounting hardware included
- Easy to install
WEDGE DOOR STOP5-1/4 in. LENGTH X 2 in. WIDTH X 1-1/4 in. HEIGHTBROWN. Perfect for keeping your doors open reinforced with durable construction. Easy to use.
- Designed to hold heavy doors open
- Slide doorstop under any door to hold open at any angle
- Can be used on carpeting, hard wood and linoleum
- Textured surface provides added traction
The Everbilt 4 in. Satin Nickel Spring Doorstops help prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.
- Made of steel
- Satin nickel finish
- Screws included
- Attaches to baseboard
- Extra-long spring for added protection
- 1 per pack
The Everbilt Hinge Pin Doorstop is held in place with a hinge pin. The self-adjusting pad makes full contact with the door. An oversized bumper mounted on an adjusting screw protects the door trim.
- Satin nickel finish
- Attaches to hinge
- No fasteners necessary
- Fits most standard residential door hinges
- Self-adjusting pad protects your door
- Decorative finish to match any home decor
The Everbilt Chrome Plated Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.
- Made of steel
- Chrome plated finish
- Screws included
- Attaches to baseboard
- Mounting hardware included
- Easy to install
The Everbilt Solid Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Easy to install.
- Made of steel
- Satin nickel finish
- No fasteners required
- Attaches to baseboard
Heavy-duty rubber door stops fit a variety of door clearances. They are bright in color for safety and high visibility. The non-marking bottom of the stop keeps your floor protected from scratches.
- Bright color for safety and high visibility
- Non-marking bottom protects your floors
- For industrial applications
- Heavy-duty rubber
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- 4-7/8 in. H
- Uses 86-5118 replacement tip
- Aluminum
- Superior quality
The Everbilt 4 in. Bright brass Spring Doorstops help prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door. Bright brass (gold) finish.
- Made of steel
- Bright brass (gold) finish
- Screws included
- Attaches to baseboard
- Extra-long spring for added protection
- 1 per pack
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- Wrought construction with concave rubber bumper
- Includes screws and anchor
- Bumper color grey
- Superior quality
Ives Schlage Cast Brass, Conforms To Ansi A156. 16 L12141 For Brass. Packed with Wood Screw and Plastic Anchor. For doors with threshold or undercut doors. Chrome.
- Ives Schlage cast brass, conforms to ansi A156
- Packed with wood screw and plastic anchor
- For doors with threshold or undercut doors
- 16 L12141 for brass
The Everbilt Oil-Rubbed Bronze Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.
- Made of steel
- Oil-rubbed bronze finish
- Screws included
- Attaches to baseboard
- Can be installed on either baseboard or door
- Easy to install
The Everbilt 4-1/2 in. Wedge Doorstop is ideal for holding doors open. Wedge style with non-slip rubber. No installation necessary.
- Made of rubber
- Dark brown finish
- For residential or commercial use
- Non-slip rubber
This product is a great cost saving solution. The price is affordable. It's easy to handle and, install with little tools required. The product is wide selection of product choices.
- Easy to access
- Style is attracting
- Durable construction
- Competitively priced
The Ives by Schlage Concave Wall Bumper in Satin Chrome prevents damage to locks with projecting buttons and features concealed mounting which discourages vandalism or tampering. The bumper is available in multiple finishes to coordinate perfectly with other hardware in the home. It becomes especially edgy when finished in Satin Chrome.
- Made from high-quality PVC for enhanced durability
- Offers slip-joint connection
- Helps cap the ends of the PVC pipe to prevent water flow
- NSF certified for maximum safety
The Everbilt Satin Nickel Light Duty Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.
- Made of steel
- Satin nickel finish
- No fasteners required
- Attaches to baseboard
- Mounting hardware included
- Easy to install
This quarter-size wall stop is constructed of a cast brass cover and a protruding rubber bumper. The cast brass housing comes in a brushed chrome finish and the rubber bumper is gray in color. The bumper inserts into the outer housing which threads onto the wall-fastened base plate with a 9/16 in. reach. This item will not repair holes caused by door knobs, but can prevent them when installed correctly.
- Used to prevent door knob handle from damaging walls
- 1 in. outside diameter with a 9/16 in. rubber bumper projection
- Brushed chrome cover ring with a gray rubber bumper insert
- Constructed of cast brass and rubber components
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
These heavy-duty door stops are constructed of diecast and come in a satin nickel plated finish. They feature a rigid shaft construction with a 3 in. reach, and a white rubber tip to cushion and prevent unwanted damages to nearby walls. These rigid door stops mount over the baseboard with a wood screw insert affixed to the base of the stop. Door stops like these are easy to install and used by many.
- Used to prevent door handle of opening doors from hitting and damaging adjacent wall
- 3 in. reach
- Satin nickel finish
- Rigid diecast construction with rubber tip
- Door stops feature an installation fastener affixed behind the base of the stop
- Includes steel screw insert affixed to bottom
- Easy to install at bottom of walls over baseboard
These 30 degree hinge pin door stops are constructed of diecast and come in a brass plated finish. They feature an adjustable screw which allows for controlled stopping at various angles of door swing, and dual rubber tips for cushioning stops. These types of door stops require no fasteners to install, as they are mounted onto the door's hinge, or hinges. These door stops will work with hinge barrel pins that have a maximum outside diameter of 5/16 in., and they can be installed on 1, 2, or 3 hinges of a door. Door stops like these are simple to install and they are used by many.
- Used to prevent door handles from damaging adjacent walls, and for stopping the door at an alternate distance
- 1-1/4 in. long adjustable bolt, 5/8 in. outside diameter rubber bumpers, and a 5/16 in. inside diameter for hinge pin insertion
- Adjustable screw allows for desired door opening angle
- Zinc diecast construction with brass-plated finish and rubber bumper
- Dual bumper prevents wall or door damage
Ives Schlage -- with Plastic Drywall Anchor. Wrought Brass. Concave Rubber Permits Knob To Strike Stop Without Damaging Or Engaging Lock Mechanism. Concealed Mounting. Conforms To Ansi A 156. 16. Polished Brass.
These heavy-duty door stops are constructed of spring steel wire and come in a classic bronze finish. They feature a separate mounting base and screw to allow for use of longer screws where broken baseboards are a problem. These door stops also feature flexible wire construction with a 3 in. reach, and a rubber tip to cushion and prevent unwanted damages to nearby walls. The mounting bases of these door stops have a large 7/8 in. O.D. Door stops like these are easy to install and used by many.
- Used to prevent door handle of opening doors from hitting and damaging adjacent wall
- With 3 in. reach, these stops can be mounted over baseboards, door panels and at bottoms of walls
- Steel construction with classic bronze finish
- Spring steel wire construction with rubber tip prevents breakage when knocked
- Includes separate screw and mounting base. Allows for use of longer screws where broken baseboards might complicate installation
- For further dimensional information, please see the line drawing
These door holder replacement tips are constructed of solid rubber and come black in color. They feature a saw-tooth profile at the bottom of each tip, designed to provide for a strong hold when in use. This style of door holder tips requires installation with one fastener. Also included with tips. These tips are easy to install and are used by many in both residential and commercial applications.
- Used to replace worn tips on drop down door holders
- 1 in. outside diameter x 13/16 in. overall height
- Black in color
- Rubber construction
- One fastener included for every tip
- For further dimensional information, please see the line drawing
These hexagon shaped wall protectors are constructed of rigid vinyl and they come in an ivory color. They feature a self-adhesive backing which allows them to be easily mounted in place. Designed to protect interior walls from impact damage by shielding between the point of contact of the walls and door knobs. Wall protectors can sometimes be used also to conceal small holes in walls caused by door knobs.
- Used to protect interior walls from impact damage by shielding contact point of wall and door knob
- 5 in. overall width of hexagon shaped wall protector
- Ivory in color
- Rigid vinyl construction
- Self-adhesive backing
- For further dimensional information, please see the line drawing