Door Stops
The Everbilt Satin Nickel Spring Doorstop (5-Pack) helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door. Easy to install.
- Made of steel
- Satin nickel finish
- Screws included
- Attaches to baseboard
- Easy installation
- Satin nickel finish adds a beautiful touch to your home decor
The Everbilt Bright Brass Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door. Bright Brass (gold) finish.
- Made of steel
- Bright brass (gold) finish
- Screws included
- Attaches to baseboard
- Mounting hardware included
- Easy to install
WEDGE DOOR STOP5-1/4 in. LENGTH X 2 in. WIDTH X 1-1/4 in. HEIGHTBROWN. Perfect for keeping your doors open reinforced with durable construction. Easy to use.
- Designed to hold heavy doors open
- Slide doorstop under any door to hold open at any angle
- Can be used on carpeting, hard wood and linoleum
- Textured surface provides added traction
The Everbilt 4 in. Satin Nickel Spring Doorstops help prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.
- Made of steel
- Satin nickel finish
- Screws included
- Attaches to baseboard
- Extra-long spring for added protection
- 1 per pack
The Everbilt Hinge Pin Doorstop is held in place with a hinge pin. The self-adjusting pad makes full contact with the door. An oversized bumper mounted on an adjusting screw protects the door trim.
- Satin nickel finish
- Attaches to hinge
- No fasteners necessary
- Fits most standard residential door hinges
- Self-adjusting pad protects your door
- Decorative finish to match any home decor
The Everbilt Chrome Plated Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.
- Made of steel
- Chrome plated finish
- Screws included
- Attaches to baseboard
- Mounting hardware included
- Easy to install
The Everbilt Solid Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Easy to install.
- Made of steel
- Satin nickel finish
- No fasteners required
- Attaches to baseboard
Heavy-duty rubber door stops fit a variety of door clearances. They are bright in color for safety and high visibility. The non-marking bottom of the stop keeps your floor protected from scratches.
- Bright color for safety and high visibility
- Non-marking bottom protects your floors
- For industrial applications
- Heavy-duty rubber
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- 4-7/8 in. H
- Uses 86-5118 replacement tip
- Aluminum
- Superior quality
The Everbilt 4 in. Bright brass Spring Doorstops help prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door. Bright brass (gold) finish.
- Made of steel
- Bright brass (gold) finish
- Screws included
- Attaches to baseboard
- Extra-long spring for added protection
- 1 per pack
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- Wrought construction with concave rubber bumper
- Includes screws and anchor
- Bumper color grey
- Superior quality
Ives Schlage Cast Brass, Conforms To Ansi A156. 16 L12141 For Brass. Packed with Wood Screw and Plastic Anchor. For doors with threshold or undercut doors. Chrome.
- Ives Schlage cast brass, conforms to ansi A156
- Packed with wood screw and plastic anchor
- For doors with threshold or undercut doors
- 16 L12141 for brass
The Everbilt Oil-Rubbed Bronze Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.
- Made of steel
- Oil-rubbed bronze finish
- Screws included
- Attaches to baseboard
- Can be installed on either baseboard or door
- Easy to install
The Everbilt 4-1/2 in. Wedge Doorstop is ideal for holding doors open. Wedge style with non-slip rubber. No installation necessary.
- Made of rubber
- Dark brown finish
- For residential or commercial use
- Non-slip rubber
This product is a great cost saving solution. The price is affordable. It's easy to handle and, install with little tools required. The product is wide selection of product choices.
- Easy to access
- Style is attracting
- Durable construction
- Competitively priced
The Ives by Schlage Concave Wall Bumper in Satin Chrome prevents damage to locks with projecting buttons and features concealed mounting which discourages vandalism or tampering. The bumper is available in multiple finishes to coordinate perfectly with other hardware in the home. It becomes especially edgy when finished in Satin Chrome.
- Made from high-quality PVC for enhanced durability
- Offers slip-joint connection
- Helps cap the ends of the PVC pipe to prevent water flow
- NSF certified for maximum safety
The Everbilt Satin Nickel Light Duty Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.
- Made of steel
- Satin nickel finish
- No fasteners required
- Attaches to baseboard
- Mounting hardware included
- Easy to install
This quarter-size wall stop is constructed of a cast brass cover and a protruding rubber bumper. The cast brass housing comes in a brushed chrome finish and the rubber bumper is gray in color. The bumper inserts into the outer housing which threads onto the wall-fastened base plate with a 9/16 in. reach. This item will not repair holes caused by door knobs, but can prevent them when installed correctly.
- Used to prevent door knob handle from damaging walls
- 1 in. outside diameter with a 9/16 in. rubber bumper projection
- Brushed chrome cover ring with a gray rubber bumper insert
- Constructed of cast brass and rubber components
- Easy to install with a few simple tools
- For further dimensional information, please see the line drawing
These heavy-duty door stops are constructed of diecast and come in a satin nickel plated finish. They feature a rigid shaft construction with a 3 in. reach, and a white rubber tip to cushion and prevent unwanted damages to nearby walls. These rigid door stops mount over the baseboard with a wood screw insert affixed to the base of the stop. Door stops like these are easy to install and used by many.
- Used to prevent door handle of opening doors from hitting and damaging adjacent wall
- 3 in. reach
- Satin nickel finish
- Rigid diecast construction with rubber tip
- Door stops feature an installation fastener affixed behind the base of the stop
- Includes steel screw insert affixed to bottom
- Easy to install at bottom of walls over baseboard
These 30 degree hinge pin door stops are constructed of diecast and come in a brass plated finish. They feature an adjustable screw which allows for controlled stopping at various angles of door swing, and dual rubber tips for cushioning stops. These types of door stops require no fasteners to install, as they are mounted onto the door's hinge, or hinges. These door stops will work with hinge barrel pins that have a maximum outside diameter of 5/16 in., and they can be installed on 1, 2, or 3 hinges of a door. Door stops like these are simple to install and they are used by many.
- Used to prevent door handles from damaging adjacent walls, and for stopping the door at an alternate distance
- 1-1/4 in. long adjustable bolt, 5/8 in. outside diameter rubber bumpers, and a 5/16 in. inside diameter for hinge pin insertion
- Adjustable screw allows for desired door opening angle
- Zinc diecast construction with brass-plated finish and rubber bumper
- Dual bumper prevents wall or door damage
Ives Schlage -- with Plastic Drywall Anchor. Wrought Brass. Concave Rubber Permits Knob To Strike Stop Without Damaging Or Engaging Lock Mechanism. Concealed Mounting. Conforms To Ansi A 156. 16. Polished Brass.
These heavy-duty door stops are constructed of spring steel wire and come in a classic bronze finish. They feature a separate mounting base and screw to allow for use of longer screws where broken baseboards are a problem. These door stops also feature flexible wire construction with a 3 in. reach, and a rubber tip to cushion and prevent unwanted damages to nearby walls. The mounting bases of these door stops have a large 7/8 in. O.D. Door stops like these are easy to install and used by many.
- Used to prevent door handle of opening doors from hitting and damaging adjacent wall
- With 3 in. reach, these stops can be mounted over baseboards, door panels and at bottoms of walls
- Steel construction with classic bronze finish
- Spring steel wire construction with rubber tip prevents breakage when knocked
- Includes separate screw and mounting base. Allows for use of longer screws where broken baseboards might complicate installation
- For further dimensional information, please see the line drawing
These door holder replacement tips are constructed of solid rubber and come black in color. They feature a saw-tooth profile at the bottom of each tip, designed to provide for a strong hold when in use. This style of door holder tips requires installation with one fastener. Also included with tips. These tips are easy to install and are used by many in both residential and commercial applications.
- Used to replace worn tips on drop down door holders
- 1 in. outside diameter x 13/16 in. overall height
- Black in color
- Rubber construction
- One fastener included for every tip
- For further dimensional information, please see the line drawing
These hexagon shaped wall protectors are constructed of rigid vinyl and they come in an ivory color. They feature a self-adhesive backing which allows them to be easily mounted in place. Designed to protect interior walls from impact damage by shielding between the point of contact of the walls and door knobs. Wall protectors can sometimes be used also to conceal small holes in walls caused by door knobs.
- Used to protect interior walls from impact damage by shielding contact point of wall and door knob
- 5 in. overall width of hexagon shaped wall protector
- Ivory in color
- Rigid vinyl construction
- Self-adhesive backing
- For further dimensional information, please see the line drawing
The Everbilt Bright Brass Spring Doorstop (5-Pack) helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door. Easy to install. Bright Brass (gold) finish.
- Made of steel
- Bright brass (gold) finish
- Screws included
- Attaches to baseboard
- Adds a beautiful touch to your home decor
- Value pack offers additional savings compared to single doorstop
These corner brackets are constructed of steel and come in a zinc-plated finish. The brackets come in an L-angle shape and each leaf has 3 offset mounting holes. Corner brackets like these are often used in chests, on windows, furniture, etc., to reinforce right angle corner joints.
- Used for bracing and securing, with multiple applications
- Countersunk screw holes allows flat head screws to sit flush with the brace
- The zinc plated steel resists rust and corrosion
- Used for both indoor or outdoor applications
- Helps to strengthen and secure right angle items
- For further dimensional information, please see the line drawing
Commercial Flexible Spring Door Stop. Satin Nickel. 3". Pkg Of 5. White Rubber Tip, Prevents Wall Damage. Spring Steel. Fasteners Included. Separate Base, Allows For Use Of Longer Screws When Broken Baseboards Are A Problem. Mfg #806051
- Satin Nickel
- 3"
- Pkg Of 5
- White Rubber Tip, Prevents Wall Damage
These door holders are constructed of a heavy cast iron material and come in a bronze colored, painted finish. Each of these door holders feature a 4 in., drop-down reach and have replaceable gray rubber tips. These kick stand type, drop down door holders are designed for use with all swinging doors in both residential and commercial applications. They also feature a spring-loaded mechanism that helps keep them in the upright, stored position when not in use. Door holders like these are designed to hold swinging doors open at a desired location, with replacement tips available. Door-mounted holders like these are easy to install and are used by many. Installation fasteners are included with each door holder.
- This door holder hardware is used to hold doors open at desired location. For use on commercial and residential applications
- Once installed, this door holder has a 4 in. drop when measured from pivot center, down to floor
- Bronze painted color
- Constructed of heavy cast iron
- Easy to install with a few simple tools and simple to use
- For further dimensional information, please see the line drawing
The Everbilt Hinge Pin Doorstop is held in place with a hinge pin. The self-adjusting pad makes full contact with the door. An oversized bumper mounted on an adjusting screw protects the door trim.
- Satin nickel finish
- Attaches to hinge
- No fasteners necessary
- Fits most standard residential door hinges
- Self-adjusting pad protects your door
- Decorative finish to match any home decor
This door stop is heavy-duty rigid. It is a wall door stop. It is 3 in. in length with a satin nickel finish. Sold in multiples 10.
- Length from base to tip 3 in.
- Diameter of base is 3/4 in.
- Quick installation
- Easy installation
Commercial Flexible Spring Door Stop. Satin Chrome. 4". Pkg Of 50. White Rubber Tip, Prevents Wall Damage. Spring Steel. Fasteners Included. Separate Base, Allows For Use Of Longer Screws When Broken Baseboards Are A Problem. Mfg #U 10126
- Satin Chrome
- 4"
- Pkg Of 50
- White Rubber Tip, Prevents Wall Damage
The Everbilt Oil-Rubbed Bronze Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.
- Made of steel
- Oil-rubbed bronze finish
- Screws included
- Attaches to baseboard
- Can be installed on either baseboard or door
- Easy to install
This floor stop is constructed of a solid steel and comes in a brushed aluminum finish. Its rubber bumper is designed to stop a swinging door from damaging adjacent walls and furnishings, and it comes with dual mounting holes. It features a tall 2-11/16 in. reach and a 2-1/2 in. base. This item includes 2 wood screws and 2 plastic anchors required for installation.
- This floor-mount bumper is used to stop swinging doors from impacting with adjacent walls and furnishings
- 2-1/2 in. base, 2-11/16 in. height
- Brushed aluminum finish
- Solid steel construction
- Installation fasteners are included with this item
- For further dimensional information, please see the line drawing
The Everbilt Chrome Plated Spring Doorstop helps prevent damage to walls when opening a door. The rubber bumper tip protects the door from getting damaged. Spring design allows flexibility with door.
- Made of steel
- Chrome plated finish
- Screws included
- Attaches to baseboard
- Mounting hardware included
- Easy to install
These 30 degree hinge pin door stops are constructed of diecast and come in a satin nickel finish. They feature an adjustable screw which allows for controlled stopping at various angles of door swing, and dual rubber tips for cushioning stops. These types of door stops require no fasteners to install, as they are mounted onto the door's hinge, or hinges. These door stops will work with hinge barrel pins that have a maximum outside diameter of 5/16 in., and they can be installed on 1, 2, or 3 hinges of a door. Door stops like these are simple to install and they are used by many.
- Used to prevent door handles from damaging adjacent walls, and for stopping the door at an alternate, permanent distance
- 1-1/4 in. long adjustable bolt, 5/8 in. outside diameter rubber bumpers, and a 5/16 in. inside diameter for hinge pin insertion
- Satin nickel finish
- Diecast construction
- Mounts on door hinge
- For further dimensional information, please see the line drawing
- Steel spring wire
Rockwood's 494 door holder now has a dual purpose. Place the strike on the bottom of the door to use as a foot pull. Then, mount the holder to the wall adjacent to the strike and utilize as a door holder when keeping a free passageway is required.
- 3 in. x 3-3/8 in. wall holder door stop
- Includes 2-1/8 in. holder
- Includes wood screws
- Limited warranty
Available with surface or concealed wiring, wall mounted holder/releases meet a variety of application requirements. This is a wall mounted unit. This has a satin chrome finish with concealed wiring.
- Concealed wiring
- Wall mount
- Non-handed
- Adjustable armature
Door Stop Black Flexible Plastic Commercial Hinge-Based Doorstop. The Doorpost doorstop is used as a temporary tool on the middle hinge to prop open doors. The DoorPRO is designed to slide over the top of the hinge pin and down alongside the hinge plates. Using it on the middle hinge balances the weight of the door and prevents marring of the contact surfaces or misalignment of the door. The DoorPRO Doorstop helps people maintain dignity and professionalism with a hassle-free solution to prop open heavy doors. From hospitality, cleaning, moving, schools, to medical service industries for anyone who needs an open door. Our revolutionary design offers a simple to use doorstop solution that enables more efficient work.
- Easy to use tool to temporarily prop open doors
- No bending over saving on back injuries
- Hinge-based lightweight durable material compact design
- Reducing property damage, easy to use, professional appearance and is available with an optional swivel belt clip to be easily carried
- This bell-type door stop prevents doors from damaging walls
- Its brass-plated, flexible, heavy-duty design is made to last.
Ordering
Place your order today!
GLYNN-JOHNSON 90 Series holders and stops are the most rugged models available for heavy-duty applications. The channel is surface-mounted to the door, most often with sex bolts, and the jamb bracket is surface mounted to the jamb, requiring minimal door and frame preparation. These versatile units can be used in conjunction with most surface-applied door closers. The provided templates allow for variable mounting positions, ranging from 85 to 110 holdopen/stop angle. These templates are designed for installation in almost all types of doors, including doors with conventional butt-type hinges or specialty hinges.
- Hold-open
- Heavy-duty
- Surface
- Aluminum finish
GLYNN-JOHNSON provides the most complete line of overhead holders and stops, offering solutions for the most demanding door control problems. These surface-mounted holders and stops offer the widest variety of functions, materials and finishes to fit all medium- to light-duty applications. GLYNN-JOHNSON 450 Series holders and stops provide reliable and versatile surface-mounted overhead door control for all medium to light-duty applications. The visible components are available in a wide variety of architectural finishes to complement any design. The 450 Series holders and stops are designed for installation in virtually all types of doors and frames including doors with conventional butt hinges, offset pivots, continuous hinges, swing clear hinges and many other specialty hinges. The templates provided allow for variable mounting positions, ranging from 85 - 110 of opening.
- Stop
- Medium duty
- Surface
- Aluminum finish
GLYNN-JOHNSON provides the most complete line of overhead holders and stops, offering solutions for the most demanding door control problems. These surface-mounted holders and stops offer the widest variety of functions, materials and finishes to fit all medium- to light-duty applications. GLYNN-JOHNSON 450 Series holders and stops provide reliable and versatile surface-mounted overhead door control for all medium to light-duty applications. The visible components are available in a wide variety of architectural finishes to complement any design. The 450 Series holders and stops are designed for installation in virtually all types of doors and frames including doors with conventional butt hinges, offset pivots, continuous hinges, swing clear hinges and many other specialty hinges. The templates provided allow for variable mounting positions, ranging from 85 - 110 of opening.
- Hold-open
- Medium duty
- Surface
- Aluminum finish
Available with surface or concealed wiring, wall mounted holder/releases meet a variety of application requirements. This is a wall mounted unit. This has a dark bronze finish with concealed wiring.
- Concealed wiring
- Wall mount
- Non-handed
- Adjustable armature
GLYNN-JOHNSON provides the most complete line of overhead holders and stops, offering solutions for the most demanding door control problems. These surface-mounted holders and stops offer the widest variety of functions, materials and finishes to fit all medium- to light-duty applications. GLYNN-JOHNSON 450 Series holders and stops provide reliable and versatile surface-mounted overhead door control for all medium to light-duty applications. The visible components are available in a wide variety of architectural finishes to complement any design. The 450 Series holders and stops are designed for installation in virtually all types of doors and frames including doors with conventional butt hinges, offset pivots, continuous hinges, swing clear hinges and many other specialty hinges. The templates provided allow for variable mounting positions, ranging from 85 - 110 of opening.
- Stop
- Medium duty
- Surface
- Satin stainless steel finish
GLYNN-JOHNSON provides the most complete line of overhead holders and stops, offering solutions for the most demanding door control problems. These surface-mounted holders and stops offer the widest variety of functions, materials and finishes to fit all medium- to light-duty applications. GLYNN-JOHNSON 450 Series holders and stops provide reliable and versatile surface-mounted overhead door control for all medium to light-duty applications. The visible components are available in a wide variety of architectural finishes to complement any design. The 450 Series holders and stops are designed for installation in virtually all types of doors and frames including doors with conventional butt hinges, offset pivots, continuous hinges, swing clear hinges and many other specialty hinges. The templates provided allow for variable mounting positions, ranging from 85 - 110 of opening.
- Stop
- Medium duty
- Surface
- Aluminum finish
GLYNN-JOHNSON offers a complete line of overhead door holders and stops, accommodating virtually all openings with solutions for even the most complex door control problems. These concealed holders and stops provide the most attractive and reliable heavy-duty door control available. GLYNN-JOHNSON 100 Series holders and stops provide the most reliable and versatile concealed overhead door control. They are designed for installation on virtually all types of doors mounted on conventional type butt hinges, pivots, continuous hinges, swing clear hinges and numerous other specialty hinges. When used in conjunction with many surface-applied door closers, 100 Series holders and stops provide the most effective control for entrance doors and vestibule doors of all types, as well as heavy or often used interior doors. Templates provided allow for variable mounting positions, ranging from 85 - 110 of opening.
- Stop
- Heavy-duty
- Concealed
- Satin brass finish