Patio Door Roller Assembly
Replace exact roller assembly on existing patio door. For smooth operation, replace both bottom roller assemblies. Other roller assemblies are available if yours is not shown.
- Steel housing
- Steel wheel
- Adjustable
- Plain bearing wheel
This is a "K" tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. The "T" shaped tab (K-tab) is simply slid up into a T shaped receptacle in the bottom of the patio door. No screws are required for installation. The housing is 3/4 in. wide and 1-1/4 in. tall with a 7/8 in. dimple width. The dimples secure it within the door's bottom frame. Used by a variety of door manufacturers.
- Housing dimensions: width 3/4 in., length is 2-5/16 in., and height is 1-1/4in.
- Overall thickness is 7/8 in.
- Used by several manufacturers
- 1-1/8 in. steel ball bearing roller
- Provides smooth operation
- Easy to install
- For further dimensional information, please see the line drawing
This is a 96 in. stainless steel track cap used to repair damaged patio or wardrobe door tracks. It can be cut to size. After the old track is prepared by grinding any spots that are wider than the original track width and cleaning it, the new track is simply pressed onto the old track after squirting a thin bead of silicone glue in the replacement track. Using a rubber mallet and a block of wood, the replacement track is snapped down over the old track.
- Stainless steel patio door track cover
- Snaps over old track, attach with silicone adhesive
- Repairs existing patio door track
- 8 ft. L can be cut to fit any size door
- Installation time approximately 20-minutes
- For further dimensional information, please see the line drawing
This ball bearing roller is constructed from nylon. It comes affixed to a steel housing with an adjustable screw. This style roller is used by Monarch Mirror doors L-series steel frame door and Contractors wardrobe doors.
- 1-1/2 in. nylon ball bearing roller
- Used by Monarch mirror doors, L- series steel frame door
- Used by several manufacturers
- Used on contractor wardrobe doors
- Provides smooth operation
- For further dimensional information, please see the line drawing
Replace exact roller assembly on existing patio door. For smooth operation, replace both bottom roller assemblies. Other roller assemblies are available if yours is not shown.
- Zinc housing
- Steel wheel
- Adjustable
- Plain bearing wheel
1-1/4 in. steel ball bearing roller with adjustable steel housing assembly. Replaces old-style extruded aluminum assembly. 3/4 in. overall thickness at dimples. Used by International and other glass door manufacturers.
- Used by International and other glass door manufacturers
- Replaces old-style extruded aluminum assembly
- Adjustable steel housing assembly
- 1-1/4 in. steel ball bearing roller
- Provides smooth operation
- For further dimensional information, please see the line drawing
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling