Patio Door Hardware
Patio glass door locks. Fit-all flush mount. With nite lock.
- 5 cam sizes included
- Screws included
- Has nite lock
- Has inset handle
- Keeper included
- NO key cylinder included
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value. This item is made in Taiwan.
- High quality
- Reliability
- Attractive styling
- No special tool required
This sliding patio door handle set is constructed of diecast and comes in a chrome plated finish. This flush mounted, hook style handle set features a non-keyed exterior pull and it is non-handed allowing it to be used on both left and right-handed patio sliding doors. This handle set fits all popular flush lock punch-outs using a 6-5/8 in. hole center spacing, and it is used to replace damaged or missing flush mounted, hook style handle sets on sliding glass doors ranging from 1 in. to 1-1/8 in. thick door frames. This item includes 4 different hook lengths, installation instructions and all fasteners necessary for the installation of this handle set, including the 2-11/16 in. keeper that mounts on the jamb. Product Selection Tip: Besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center to center.
- Handle set is used to replace damaged or missing flush mount, hook style handle sets on 1 in. to 1-1/8 in. thick sliding glass doors
- Designed for international doors
- Item has a 6-5/8 in. hole center spacing
- Constructed of diecast materials with a chrome finish
- Non-keyed
- For further dimensional information, please see the line drawing
Classic Patio Door Handle Lock. For sliding glass doors. No key locking.
- 3-15/16 in. hole centers
- No key cylinder
- Metal lock body
- Wood handle
- For sash controls and other brand doors
- Made of heavy-duty zinc
This mortise lock is constructed of steel components with rounded faceplate ends. It features an adjustable, spring-loaded hook latch projection and works with mortise style, surface-mounted patio door handle sets with vertical keyway positions when in the locked position. The mounting hole centers of this lock measure 3-11/16 in. from center to center, and the rear housing corners are square. This mortise lock is used by W and F patio door manufacturers and many others. Selection Tip: To ensure the perfect match is selected prior to purchasing, the lock will need to be removed to compare the following 4 features (besides the width of housing): 1) The distance of the mounting holes measured from center to center, 2) The faceplate ends, rounded or square, 3) The position of the slotted keyway when in the locked position, at 45° angle or vertical, and 4) The shape of the housing corners at the rear, square or slanted.
- Used to replace damaged or missing mortise locks in patio sliding doors, used by W and F and other manufacturers
- 1/2 in. W body, 3-3/16 in. tall faceplate, 1-1/8 in. D, 3-11/16 in. mounting hole centers
- Adjustable hook projection
- Constructed of steel components
- Vertical keyway
- For further dimensional information, please see the line drawing
Replace exact roller assembly on existing patio door. For smooth operation, replace both bottom roller assemblies. Other roller assemblies are available if yours is not shown.
- Steel housing
- Steel wheel
- Adjustable
- Plain bearing wheel
Extruded aluminum inside pull with wood grain feature strip. Clamp-latch with metal activator. Flush extruded aluminum outside pull. Used by a variety of sliding glass door manufacturers. Latch hook profile is 1/2 in. with a projection is 1/2 in.
- Latch hook profile is 1/2 in.
- Projection is 1/2 in.
- 4-15/16 in. hole center
- Flush extruded aluminum outside pull
- Extruded aluminum inside pull
- For further dimensional information, please see the line drawing
This is a black plastic pull with steel latch. It is non-handed, mortise installation. Used by a variety of door manufacturers.
- Can be used either left or right hand
- Used by a variety of door manufacturers
- Black plastic pulls
- Steel latch hook
- Black in color
- For further dimensional information, please see the line drawing
Strybuc sliding Patio Glass Door Pull 6-5/8" 6-5/8" Center To Center Mounting Hole Spacing Handle is reversible Wood pull with chrome brackets Direct replacement for SKU 842300 Mfg #13-109
- 6-5/8" Center To Center Mounting Hole Spacing
- Handle is reversible
- Wood pull with chrome brackets
- Direct replacement for SKU 842300
The original Charley Bar safety lock for sliding patio doors, same original thickness. Stores upright when not in use.
- Can be cut to fit and size door
- Safety key lock prevents bar from being raised from outside
- Saddle keeps small children from opening door from the inside
- Includes hardware and instructions
This is a "K" tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. The "T" shaped tab (K-tab) is simply slid up into a T shaped receptacle in the bottom of the patio door. No screws are required for installation. The housing is 3/4 in. wide and 1-1/4 in. tall with a 7/8 in. dimple width. The dimples secure it within the door's bottom frame. Used by a variety of door manufacturers.
- Housing dimensions: width 3/4 in., length is 2-5/16 in., and height is 1-1/4in.
- Overall thickness is 7/8 in.
- Used by several manufacturers
- 1-1/8 in. steel ball bearing roller
- Provides smooth operation
- Easy to install
- For further dimensional information, please see the line drawing
This sliding door handle set has an extruded aluminum inside pull with a wood grain feature strip and a black diecast outside pull. It features a standard reversible mortise mount handle set for left or right-handed mortise-locking doors. Easy to install with a few simple tools.
- Standard handle set for mortise locks
- Black outside pull and inside pull with activator lever for mortise latch
- Works with most Mortise Lock systems
- Non-handed design
- Surface mounted
- For further dimensional information, please see the line drawing
This sliding door handle set is constructed from extruded aluminum. It features a die cast outside pull and a wooden inside pull handle. It comes finished in white.
- Black Diecast Steel body
- Hardwood handle
- 3-15/16 in. mounting holes
- Black Diecast Outside Handle
- Non-keyed
- Reversible to right or left handed doors
- Includes lever
- For further dimensional information, please see the line drawing
- For use on mortise style hook latch type doors
This is a 96 in. stainless steel track cap used to repair damaged patio or wardrobe door tracks. It can be cut to size. After the old track is prepared by grinding any spots that are wider than the original track width and cleaning it, the new track is simply pressed onto the old track after squirting a thin bead of silicone glue in the replacement track. Using a rubber mallet and a block of wood, the replacement track is snapped down over the old track.
- Stainless steel patio door track cover
- Snaps over old track, attach with silicone adhesive
- Repairs existing patio door track
- 8 ft. L can be cut to fit any size door
- Installation time approximately 20-minutes
- For further dimensional information, please see the line drawing
This is an extruded aluminum inside pull with wood grain feature strip. Clamp-latch with metal activator. Flush extruded aluminum outside pull. Used by a variety of sliding glass door manufacturers. Latch hook profile is 1/2 in. with a projection is 1/2 in.
- Extruded aluminum inside pull with wood grain feature strip
- Flush extruded aluminum outside pull
- Used by a variety of glass door manufacturers
- Latch hook profile is 1/2 in.
- Projection is 1/2 in.
- For further dimensional information, please see the line drawing
This ball bearing roller is constructed from nylon. It comes affixed to a steel housing with an adjustable screw. This style roller is used by Monarch Mirror doors L-series steel frame door and Contractors wardrobe doors.
- 1-1/2 in. nylon ball bearing roller
- Used by Monarch mirror doors, L- series steel frame door
- Used by several manufacturers
- Used on contractor wardrobe doors
- Provides smooth operation
- For further dimensional information, please see the line drawing
This sliding patio door handle set is constructed of mixed materials including wood and diecast components, and it features a keyed exterior pull. The outside locking pull and the inside supports are constructed of diecast and come finished in a chrome finish. The inside pull is made of natural wood and is finished in a smooth, clear finish. This handle set is a flush mounted, hook style handle set and it is non-handed allowing it to be used on both left and right-handed patio sliding doors. This handle set fits all popular flush lock punch-outs with a 6-5/8 inch hole center spacing, and it is used to replace damaged or missing flush mounted, hook style handle sets on sliding glass doors ranging from 1 inch to 1-1/8 inch thick door frames. This item is packaged complete with a keyed cylinder lock, 2 keys and 4 different hook lengths. Installation instructions and all fasteners necessary for the installation of this handle set are included in packaging, including the 2-11/16 inch keeper that mounts on the jamb. Product selection tip: besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center-2-center.
- INCLUDES - (1) Standard reversible flush mount for left or right-handed sliding glass doors that fits 6-5/8 inch hole spacing and only works with hook style door handles (Do not overtighten during installation or the key may bind)
- REPLACE OLD OR BROKEN DOOR HANDLES - When your door handle is broken, old or unsightly, don't replace the door entirely, just get a new sliding glass door handle set, this door handle is a hook style with a flush mount and is keyed
- INSTALLATION - Installation is quick and easy, plus all fasteners and instructions are included and can be used on both left and right-handed patio sliding doors that are 1 inch to 1-1/8 inch thick, using 6-5/8 inch mounting hole centers
- HOOK LOCK SELECTION - Each factory sealed package contains four different hook lengths (3/8 inch, 1/2 inch, 5/8 inch, and 3/4 inch)
- COMPLEMENTS YOUR SLIDING PATIO DOOR - This hook style door handle is constructed of mixed materials, including a surface mounted wood pull, making it the perfect choice for your sliding door
- NOTE - Please refer to the line art for dimensions and compare with your needs before ordering
Replace exact roller assembly on existing patio door. For smooth operation, replace both bottom roller assemblies. Other roller assemblies are available if yours is not shown.
- Zinc housing
- Steel wheel
- Adjustable
- Plain bearing wheel
1-1/4 in. steel ball bearing roller with adjustable steel housing assembly. Replaces old-style extruded aluminum assembly. 3/4 in. overall thickness at dimples. Used by International and other glass door manufacturers.
- Used by International and other glass door manufacturers
- Replaces old-style extruded aluminum assembly
- Adjustable steel housing assembly
- 1-1/4 in. steel ball bearing roller
- Provides smooth operation
- For further dimensional information, please see the line drawing
Strybuc sliding Patio Glass Door Roller 1-1/4" 1-1/4" Steel Roller Wheel Steel housing Adjustable Direct replacement for SKU 844900 Mfg #9-230-2
- 1-1/4" Steel Roller Wheel
- Steel housing
- Adjustable
- Direct replacement for SKU 844900
Flush Sliding Glass Door Handle. Black Finish. Mfg #842200
- Black Finish
- Package Quantity 1
- Product height -1.100 in.
- Product length-8.500 in.
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
Classic Patio Door Handle Lock. For sliding glass doors. with key locking.
- 3-15/16 in. hole centers
- With locking key cylinder
- Metal lock body
- Wood handle
- Includes keeper
- Made of heavy-duty zinc
This is a diecast metal keeper or strike that is used by a variety of screen door manufacturers. Dimensions are 7/32 in. wide with a 1/4 in. projection. Features a downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch. All the necessary mounting hardware is included for a quick and easy installation. For other different projections see Prime-Line parts A 126, A 128 or A 203.
- Used by a variety of sliding patio door manufacturers
- Secures screen door from accidental opening by weather or pets
- 7/32 in. wide and 1/4 in. projection
- Diecast construction
- Adjustable installation
- All the necessary mounting hardware is included for a quick and easy installation
- A Phillips head screwdriver is required for installation