Searched for "46171500"
As the industry leader, Kwikset has provided trusted security for over 60-years and has become synonymous with security, peace of mind, style and innovation. Kwikset offers a wide variety of door hardware products. Including pocket door locks, designer roses and other hardware accessories to coordinate your entire home. Covered by Kwikset's lifetime mechanical and finish warranty.
- Kwikset model number 83796
- Available in 7 finishes
- Satin nickel finish
- 2.25 in. faceplate height
- 1.75 in. faceplate width
- Round corner
- Genuine Kwikset part
- Lifetime mechanical and finish warranty
This decorative door knocker and viewer is constructed of diecast materials and comes in a satin nickel finish. Its vintage design extends a total of 5-1/2 inch tall and features a 180 degree angle of view. This door knocker and viewer can be installed on doors from 1-3/8 inch thick to 1-3/4 inch thick, with a required 9/16 inch inside diameter hole for installation of viewer. The integrated door viewer within this door knocker is designed to help keep you safe when answering your door and is ideal for day or night viewing with adequate exterior lighting. This door knocker and viewer is easy to install and it is used by many. See Prime-Line part S 4793 for a door viewer inside cover. Inside viewer covers (not included with this item) prevent reversed visibility through door viewers from the exterior of the home, increasing the security and privacy of your home.
- Used on entry doors to provide privacy while viewing from inside the home, and also as a decorative door knocker for visitors
- Requires a 9/16 inch diameter installation hole, designed to install on 1-3/8 inch to 1-3/4 inch thick doors, with a total height of 5-1/2 in
- Satin nickel-plated finish
- Diecast construction
- Installation fasteners included
- Please refer to the line art for dimensions and compare with your needs before ordering
All standard installation parts included. Protective coating to aid in the duration of the finish. Satin nickel finish.
- Knocker and viewer combination
- Has a 160 degree viewer
- Product is satin nickel in finish
- Product is for the exterior of a home
- Product is installed on an exterior door
- Product has a mounting screw on the interior of the door
This exterior plate is intended to work in conjunction with the Shield Security Single Sided-Deadbolt. This plate is to be used for doors that have holes bored fully through the door. The maximum diameter bore hole this replacement will cover is 2-1/8" wide.
- Replacement plate for Shield Security Single-Sided Deadbolts
- Fits doors between 1-3/8" to 1-3/4" thick
- Limited Lifetime Warranty
- Full Metal Construction
- Fits bore holes up to 2-1/8" in diameter
- Easy Installation
The product is high quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High-quality
- Reliability
- Durability
- Attractive styling
- Wide selection
- No special tool required
2-1/8" X 1-1/8"
- Screws Furnished
- Primed
Covers up to 2-1/8" hole
- Standard 161 prep
- Order latch and frame fillers separately
- Available finishes: SL (silver coated)
This deluxe knocker and viewer is constructed from die cast and comes finished in satin chrome. It features a 180 degree viewer and requires a 9/16 In. installation hole. It fits on doors that are 1-3/8 in. to 1-3/4 in. thick.
- Used on entry doors to provide privacy while viewing from inside the home, and also as a decorative door knocker for visitors
- Requires a 9/16 in. diameter installation hole, designed to install on 1-3/8 in. to 1-3/4 in. thick doors, with a total height of 5-1/2 in.
- Satin chrome-plated finish
- Diecast construction
- Installation fasteners included
- For further dimensional information, please see the line drawing
As the industry leader, Kwikset has provided trusted security for over 70-years and has become synonymous with security, peace of mind, style and innovation. The Satin Chrome finish gives the product a modern and minimalist look. Genuine Kwikset Part.
- T strike
- Kwikset model number 83028
- Available in 7 finishes
- 2.75 in. H
- 1.69 in. total W
- 1.125 in. W jamb
- Square corner
- Genuine Kwikset part
- Lifetime mechanical and finish warranty
Ideal For Covering Exposed Holes In Doors. Covers Up To 2-5/8" Hole, Self-Centering Disc Prevents Plate Movement. For Wood Or Metal Doors. Prime Coat.
Packed 10 Per Case. For Installing Cylindrical Door Locks with A 2 in. Or 2-1/8 in. Bore. Backset 2-3/8 in. Door Thickness. 1-3/8 in. Overall Dimensions: 4 in. x 9 in. Finish: Stainless Steel.
- For use with cylindrical door locks with 2-1/8 in. hole
- 2-3/8 in. backset
- 1-3/4 in. door thickness
- 4 in. x 9 in.
- Brushed stainess steal finish
- #8 x 3/4 in. Phillips head truss head trim screws, and #8-32 x 1/4 in. flat head screws for latch supplied
US Lock is the trusted wholesale distributor of choice for locksmiths and security professionals nationwide. We take pride in offering our customers the best service and overall value in the industry combined with a diverse, high-quality selection of more than 10,000 exclusively branded products. We carry more than 16,000 convenience products designed to save you time and money. Our staff has been serving the needs of security professionals for nearly 40-years.
- Fits US Lock 2010/2050/2050C series product
- Full lip strike
- Finish: US3 bright brass
- Combination screws for wood or metal doors and frames
- With adjustable tab
- Limited lifetime warranty
Door Knocker With 160° Viewer. Satin Nickel. Viewer 0.5" Dia. Fits Doors 1.38 To 1.75" Thick. Overall Knocker 4"H. Center-To-Center 2.5"H. Mfg #874156
- Satin Nickel
- Viewer 0.5" Dia
- Fits Doors 1.38 To 1.75" Thick
- Overall Knocker 4"H
The product is high-quality and reliability and durability. The product is ease to use and attractive styling. The product is wide selection of product choices and great value.
- High-quality
- Reliability
- Durability
- Attractive styling
Satin brass finish. Narrow stile, face plate 1-1/4" wide. Solid cast latch, cavity depth = 1/2", width = 1/2", height = 1-3/8". Heavy duty latch spring. Mortise type, backset 1-9/16" Deep. Fail secure, standard action unlocks when energized. Corrosion resistant, plated face and latch. 8-16 Ac voltage. Min. Order: 1 EA
Packed 10 Per Case. For Installing Cylindrical Deadbolts with A 2-1/8 in. Bore. Backset 2-3/4 in.: Door Thickness: 1-3/4 in.: Overall Dimensions: 4-1/4 in. x 4-1/2 in. Finish: Stainless Steel.
- 2-3/4 in. back set
- 1-3/4 in. door thickness
- 1 in. to 1/2 in. hole for deadbolt
- Brushed stainless finish
- #8 x 3/4 in. Phillips head truss head trim screws, and #8-32 x 1/4 in. flat head screws for latch supplied
- For deadbolt
The non-handed 9600 series Genesis is a windstorm-rated, surface-mounted electric strike designed to accommodate rim exit devices with a 3/4" throw latchbolt. All components are completely encased within its 3/4" thick stainless steel housing, so no cutting on the frame is required for installation.Simply place the electric strike on the surface of the frame, align it with the exit latchbolt, and install. it is field selectable for fail secure and fail safe operation, as well as for 12VDC or 24VDC.Standard Features
- Belt measures 180 in. L x 1-1/2 in. W
- Designed to be completely waterproof
- Features 180 grit
- Can be used with copper, brass, or aluminum fittings
- Dynamic Strength: 70" per Pound
For installing double-lock combination locksets with 2-1/8" holes on top and bottom with 4" centers
- Size: 4" x 9"
- Finish: PB (polished brass)
2-1/4" X 1"
- Screws Furnished
- Primed
The Pemko Privacy Door Latch (PDL) is recommended for environments with corridor to-interior openings such as hotels or dormitories. This durable accessory allows the door to be opened for identification while providing privacy for the guest or resident. The design of the PDL does not allow the door to be held open, avoiding door and frame damage caused by the door slamming against a traditional flip latch or chain. The PDLs silicone pads provide additional protection for the door. The PDL is UL Classified as a fire door accessory. It also meets the requirements of NFPA 80 Sections 5.2.4.2 and 5.2.13.3, that requires auxiliary hardware does not interfere or prohibit the proper operation of fire rated doors, and that doors are not blocked or wedged in the open position.
- ADA compliant
- Cannot be used to keep door ajar
- Enhanced in room privacy
- Small footprint and easy to install
- UL classified as fire door accessory
With mortise & universal strikes
- Screws included
- 1-3/16" throw
- Finish: Aluminum
Packed 10 Per Case. For Installing Cylindrical Door Locks with A 2" Or 2-1/8" Bore. Backset 2-3/8". Door Thickness. 1-3/4" . Overall Dimensions: 4" X 9". Finish: Stainless Steel.
- 9" Height
- 4" Width
- 2-1/8" Hole
- 2-3/8" Backset
- 1-3/4" Door
- For CYLINDRICAL DOOR LOCKS with 2 1/8" hole
- Helps to cover up wood damage, re-size holes and reinforce locking systems
- Reduces bore from 3-1/2? in. down to 2-1/8? in.
- Allows for use on all door locks from standard residential to commercial quality
- For use with Mortise Deadbolt and Rim Cylinders
- Includes 2 parts
US Lock is the trusted wholesale distributor of choice for locksmiths and security professionals nation wide. We take pride in offering our customers the best service and overall value in the industry combined with a diverse, high-quality selection of more than 10,000 exclusively branded products. We carry more than 16,000 convenience products designed to save you time and money. Our staff has been serving the needs of security professionals for nearly 40-years.
- Fits US Lock 2010/2050/2050C series product
- T-strike
- Finish: US32D brushed stainless
- Combination screws for wood or metal doors and frames
- Hardware included
- Limited lifetime warranty
Used to convert 2-3/8" to 2-3/4" backset
- Finish: Stainless Steel (630)
- Dimensions: 3-1/2" O.D.
- Package of 2
EZ Armor represents the perfect combination of ease and functionality. It can be installed in about 30 minutes by just about anyone with a drill and easily repairs existing damage. Unlike other products, EZ Armor reinforces all of the key points on a door (Jamb, locks, hinges). Other products reinforce only one key point, leaving other points to break and allowing intruders to enter at will. Anything less will cost you more in the long run.
- Reinforces the jamb locks and hinges; any part left unprotected will break when kicked
- Can be installed in about 30 minutes with minimal do-it-yourself skills; pieces can be installed without removing trim or cutting nails
- Will fit jambs of any thickness and locks with any backset
- Repairs existing kick-in damage
- Built-in stainless steel threaded insert
- Long lasting and secure mounting bolt
- Imported heavy-duty stainless steel trim screws
- Permanent holding power eliminates loosening of latch mounting screws
- For repairing, remodeling and reinforcing
- Save costly door replacement, help resist kick-in attacks and help keep wood doors from splitting
- Available in consumer-oriented box pack
The Von Duprin 5100-3FP Electric Strike is a tamper-resistant strike made tough with heavy-duty construction. With a single solenoid and dual-voltage power, the 5100 Electric Strike is equipped for long-lasting use, carefully tested for over one million cycles. Coupled with its hold strength hold of 1300 lbs., the 5100 is ideally engineered for durability and dependability in commercial locations where security and durability are paramount.
- Internal 12/24 dual-voltage solenoid
- Adjustable keeper
- Fail-safe/fail-secure selectability
- 1300 lbs. holding strength
- Fewer return trips to the job site
- Heavy-duty construction
- Tamper resistant design
- Tested to over one million cycles
The Pemko Privacy Door Latch (PDL) is recommended for environments with corridor to-interior openings such as hotels or dormitories. This durable accessory allows the door to be opened for identification while providing privacy for the guest or resident. The design of the PDL does not allow the door to be held open, avoiding door and frame damage caused by the door slamming against a traditional flip latch or chain. The PDLs silicone pads provide additional protection for the door. The PDL is UL Classified as a fire door accessory. It also meets the requirements of NFPA 80 Sections 5.2.4.2 and 5.2.13.3, that requires auxiliary hardware does not interfere or prohibit the proper operation of fire rated doors, and that doors are not blocked or wedged in the open position.
- ADA compliant
- Cannot be used to keep door ajar
- Enhanced in room privacy
- Small footprint and easy to install
- UL classified as fire door accessory
These Shield Security strike plates are constructed from zinc. This provides a durable product for years of use. They are powder coated to provide a quality finish that will match other hardware in your home. These strike plates replace most residential interior and exterior strikes.
- Easy Installation
- Limited Lifetime Warranty
- Full metal construction
- Powder Coated Finish
- Replaces standard door knob and door lever strike plates
- Shield Security Brand
US Lock is the trusted wholesale distributor of choice for locksmiths and security professionals nationwide. We take pride in offering our customers the best service and overall value in the industry combined with a diverse, high-quality selection of more than 10,000 exclusively branded products. We carry more than 16,000 convenience products designed to save you time and money. Our staff has been serving the needs of security professionals for nearly 40-years.
- Fits US Lock 2010/2050/2050C series product
- T-strike
- Finish: US10B oil rubbed bronze
- Combination screws for wood or metal doors and frames
- Hardware included
- Limited lifetime warranty
This exterior plate is intended to work in conjunction with the Shield Security Single Sided-Deadbolt. This plate is to be used for doors that have holes bored fully through the door. The maximum diameter bore hole this replacement will cover is 2-1/8" wide.
- Replacement plate for Shield Security Single-Sided Deadbolts
- Fits doors between 1-3/8" to 1-3/4" thick
- Limited Lifetime Warranty
- Full Metal Construction
- Fits bore holes up to 2-1/8" in diameter
- Easy Installation
As the industry leader, Kwikset has provided trusted security for over 60 years and has become synonymous with security, peace of mind, style and innovation. The Satin Chrome finish gives the product a modern and minimalist look. Lifetime Limited Warranty included.
- Genuine Kwikset part
- Oval designer rose for Signature Series reversible levers
- Installs on passage, privacy and dummy lever sets
- Comes with easy-to-follow directions
- Overall size: 4.896 in. H x 2.710 in. W
- Trim only - must purchase knob or lever separately
- Lifetime mechanical and finish warranty
Solid Brass Chain Door Lock - US3 Polished Brass - Meets ANSI A156.16 Standards
- Easy to install
- Welded twist link steel chain finished to match door plate and chain holder
- Made from wrought brass
- Finish pairs well with vintage looks and colonial designs
- Packed with sheet metal screws
- Added gauge thickness provides years of durability
Don-Jo -- For Out-Opening Doors, All Backsets, Deadbolts Or Key In Knob Locks. Protects Latch Or Bolt. Conceals Lip Of Existing Strike. Accepts Up To 3-1/2" Rose. Silver Plated, 7".
- For Out-Opening Doors, All Backsets, Deadbolts Or Key In Knob Locks
- Protects Latch Or Bolt. Conceals Lip Of Existing Strike
- Accepts Up To 3-1/2" Rose
- Silver Plated, 7"
- All mounting hardware included.
- Simple instaltion
This wrap-around is designed for a cylindrical door lock. It measures 4 in. x 4-1/2 in. This wrap-around is sold individually.
- Backset: 2-3/8 in.
- Door size: 1-3/8 in.
- Gauge: 22 (0.032)
- Polish brass finish
- 4 in. W
- 4.5 in. tall
- U.S. 3 Finish
- For Installing Cylindrical Dead Bolts Or Locksets with 2-1/8" Bore
Packed 10 Per Case. For Installing Cylindrical Deadbolts with A 2-1/8" Bore.Backset 2-3/8":Door Thickness: 1-3/8":Overall Dimensions: 4" X 4 5/16".Finish: Stainless Steel.
- 4" x 4 5/16"
Packed 10 Per Case. For Installing Cylindrical Deadbolts with A 2-1/8" Bore. Backset 2-3/8": Door Thickness: 1-3/4": Overall Dimensions: 4" X 4-1/2". Finish: Stainless Steel.
- 4-1/2" Height
- 4" Width
- 2-1/8" Hole
- 2-3/8" Backset
- 1-3/4" Door
- For CYLINDRICAL DOOR LOCKS with 2 1/8" hole
Ives FB458 US26D Manual Flushbolt for Metal Door. Easy to install. ANSI/BHMA A156.16, L04251.
For installing double-lock combination lockets.with 2-1/8" holes on top and bottom with 4" centersSize: 4 1/4" x 9".Finish: S (stainless steel).
- For Double lock combination with 2 - 2 1/8" holes
- 2 3/8" backst
- 1 3/4" door Thickness
- 4" center to center holes
- 4 1/4" x 9"
- Brushed stainlee steel
This ring-lock designed security device is for use with swing-in doors and helps prevent entry doors from being forced open from the outside. It is constructed of stamped steel and comes in a brass-plated finish. The jamb plate keeper easily installs into the jamb with provided 3-1/2 inch screws, and the lock plate hangs from the adjacent wall from a storage chain and bracket. This lock meets Texas building code requirements.
- Used to provide a secondary security locking device for swing-in doors
- 3 inch x 3 in
- Brass plated finish
- Stamped steel construction
- Installation fasteners included
- Please refer to the line art for dimensions and compare with your needs before ordering
Classic Wrap around plate. For use with 1 3/8" door with 2 3/8" backset. with 1 -2/18" hole. Solid brass finish
- 4" X 9"
- FOR 1 3/8"
- WITH 2 3/8" BACKSET
- 2 1/8" hole
- polished brass finish
- matching hardware supplied
US Lock is the trusted wholesale distributor of choice for locksmiths and security professionals nationwide. We take pride in offering our customers the best service and overall value in the industry combined with a diverse, high-quality selection of more than 10,000 exclusively branded products. We carry more than 16,000 convenience products designed to save you time and money. Our staff has been serving the needs of security professionals for nearly 40-years.
- Fits US Lock 2010/2050/2050C series product
- Full lip strike
- Finish: US10B oil rubbed bronze
- Combination screws for wood or metal doors and frames
- With adjustable tab
- Limited lifetime warranty
These Shield Security strike plates are constructed from zinc. This provides a durable product for years of use. They are powder coated to provide a quality finish that will match other hardware in your home. These strike plates replace most residential interior and exterior strikes.
- Easy Installation
- Limited Lifetime Warranty
- Full metal construction
- Powder Coated Finish
- Replaces standard door knob and door lever strike plates
- Shield Security Brand
This exterior plate is intended to work in conjunction with the Shield Security Single Sided-Deadbolt. This plate is to be used for doors that have holes bored fully through the door. The maximum diameter bore hole this replacement will cover is 2-1/8" wide.
- Replacement plate for Shield Security Single-Sided Deadbolts
- Fits doors between 1-3/8" to 1-3/4" thick
- Limited Lifetime Warranty
- Full Metal Construction
- Fits bore holes up to 2-1/8" in diameter
- Easy Installation
These Shield Security strike plates are constructed from zinc. This provides a durable product for years of use. They are powder coated to provide a quality finish that will match other hardware in your home. These strike plates replace most residential interior and exterior strikes.
- Easy Installation
- Limited Lifetime Warranty
- Full metal construction
- Powder Coated Finish
- Replaces standard door knob and door lever strike plates
- Shield Security Brand
- Built-in stainless steel threaded insert
- Long lasting and secure mounting bolt
- Imported heavy-duty stainless steel trim screws
- Permanent holding power eliminates loosening of latch mounting screws
- For repairing, remodeling and reinforcing
- Save costly door replacement, help resist kick-in attacks and help keep wood doors from splitting
- Available in consumer-oriented box pack