Heating Equipment Accessories
Oil Electronic Aquastat Controller provides electronic temperature sensing in a UL limit-rated controller. Controls the circulator, oil burner and boiler temperature. Provides status, LED diagnostic and EnviroCOM communication.
- Well mount, horizontal or vertical position, or flush mounted remote from the well
- Easy installation improved terminal layout and multiple knockouts make change-outs a snap
- Increased flexibility - vertical, horizontal and flush-mount options; configurable for single-function use
- Multi-function display - get set point, temperature reading and diagnostic information at your fingertips
Freshen the appearance of your Com-Pak heater with this convenient replacement grille kit. Perfect for quickly updating an old, discolored heater grille, this handy kit includes screws, a built-in thermostat knob and a plug for heaters without a thermostat. Simply installs with a screwdriver.
- Compatible exclusively with Cadet Com-Pak (CS) and Com-Pak Max (CM) electric heaters
- Use with Com-Pak and Com-Pak Max electric heaters with and without a built-in thermostat
- Kit includes screws, a built-in thermostat knob for heaters with a built-in thermostat and a plug for heaters without a thermostat
- One piece, 20-gauge steel construction with white powder-coated paint finish that eliminates sharp edges
- Installs easily using only a screwdriver
- Single grille kit in white (10-pack kits available)
- 1-year limited warranty
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Direct vent side wall vent kit
- HVAC application
- Dimensions: 7 in. x 7 in. x 4.5 in.
- Kit, vent, furnace, side wall
This powerful fan-forced electric heater provides excellent warm air flow, quickly warming up to 200 sq. ft. The horizontal, register-style grille blends seamlessly into any room decor. This product is an interior replacement heater assembly only with multi-watt and multi-volt options. A full heater unit requires a wall can and grille sold separately. A line voltage wall or built-in thermostat is needed for control.
- Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
- Multi-Watt options with 240-Volt wiring: 1,600-Watt output (6.7 Amps, 5,460 BTUs); 900-Watt output (3.8 Amps, 3,075 BTUs); 700-Watt output (2.9 Amps, 2,390 BTUs)
- Multi-Watt options with 208-Volt wiring: 1,200-Watt output (5.8 Amps, 4,095 BTUs); 675-Watt output (3.3 Amps, 2,305 BTUs); 525-Watt output (2.5 Amps, 1,795 BTUs)
- Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
- Effectively warms small to medium sized rooms. Wire the wattage output to suit your area requirements
- Fast and simple installation with one-screw mounting into existing recessed wall can
- For complete heater, a Cadet Register wall can and grille are required (sold separately)
- Thermostat required for operation; choose a line voltage electronic or programmable wall thermostat or RMT2 built-in thermostat kit (sold separately)
- Heating element and blower made from heavy duty gauge steel
- A high-temperature safety device switches heater off if normal operating temperatures are exceeded
- UL listed in the US for safety compliance with a 5-year limited warranty
Easy to install and operate, this Com-Pak Series single-pole thermostat provides built-in temperature control. Designed exclusively for Com-Pak Series heaters, this thermostat lets you easily control the temperature with an adjustable dial. Designed with a low position (dial turned completely counterclockwise) that turns the heater on in cold rooms automatically.
- Provides built-in temperature control on Com-Pak heaters, eliminating the need for a wall thermostat and additional wiring
- Compatible with Com-Pak (CS), Com-Pak Twin (CST) and Com-Pak Max (CM) fan-forced electric heaters
- Simple 2-wire installation (single-pole)
- Almond knob matches your Com-Pak heater (White color available)
- 22 Amp
- Temperature range is 40°F - 85°F
- Accessory to UL listing of Cadet Com-Pak heaters
- 1-year limited warranty
- Choose the right thermostat for your heater and your home.
Heater Element
- 3000w
- 277v
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Williams Blower Accessory promotes increased warm air circulation and minimized temperature differences in the room for enhanced comfort. Ideal for larger rooms where faster heat is desired. Designed to fit a variety of Hearth heaters.
- Fits model size 3501522, 5001522, 6501522, 3502522, 5002522 and 6502522
- Includes an automatic and manual fan switch along with a power supply cord
- 120-Volt
- 150 CFM
- Not for use on the 20,000 BTU/hour heaters
The high-altitude kit for the Williams 5008232 gas wall heater contains the necessary orifices for converting this room heater to function in elevations up to 1000 ft. Standard wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
Use Williams' 24 in. Vent Extension to meet your installation needs, this vent extension is designed to accommodate venting through a wall 15 in. to 24 in. thick. Vent tubes only. Does not include outside cap.
- Includes flue extension tube, air inlet tube and air inlet shield
- Galvanized metal
- Designed to fit the Williams 1403621, 1403622, 3003621 and 3003622 direct-vent furnaces
- For up to 24 in. wall thickness
Heater Element
- 5kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
The high-altitude kit for the Williams 3501521A room heater contains the necessary orifices for converting this room heater to function in elevations up to 1000 ft. Room heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
Heater Element
- 10kw
- 1 Phase
- For BCS2 18/24/30/36/37/42/48/60 air handler
Complete Heater Unit
- 480V
- 5KW
- HOR/VER
MFG Part# BT1420034
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
This high altitude conversion kit contains the necessary orifices for converting Williams heaters to function at elevations up to 1000 ft. A standard wall heater is rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 2-orifice sizes included
This Williams Blower Accessory promotes increased warm air circulation and minimized temperature differences in the room for enhanced comfort. Designed to fit a variety of Williams furnaces. This blower accessory features an automatic power switch as well as a power cord for added convenience and ease of use.
- Helps improve warm air circulation and reduces temperature differences in the room for comfort
- Mounts easily inside the furnace casing
- Fits Williams model numbers 2203621, 2203622, 3003621 and 3003622
- Includes an automatic fan switch and a power supply cord (115-Volt power supply required) for your convenience
- Moves air at up to 135 CFM for effective use
480v
- 40w
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Installation Kit for 20 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ERXL 60,000 BTU or 80,000 BTU burner boxes with 20 ft. tube sets
- Kit includes: thermostat, shut-off valve, stainless steel flex gas connector, vent cap, and chain kit
- 24-Volt thermostat with 50-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
The high-altitude kit for the Williams 3003822 direct vent wall heater contains the necessary orifices for converting this heater to function in elevations up to 1000 ft. Standard wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 2-orifice sizes included
Vent limit switch for Williams furnaces has gold-plated switch contacts. It senses the furnace vent temperature and shuts off the appliance if it is not venting correctly. Board-mounted design with switch mounted on the extension straps.
- Compatible with Williams furnace models: 3508331, 3508332, 3508731, 3508732, 5008731, 5008732, 5508331, 5508332, 6508731, 6508732
- Determines when the air is warm enough to circulate
- Shuts off the burner when the air in the system exceeds a maximum temperature
- Original factory part
MFG Part# BT1420031
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 240v
- 10.4kw
- For Gas Furnace Applications (pilots, flame sensors, etc.)
The high altitude kit for the Williams 5008232 gas wall heater contains the necessary orifices for converting this room heater to function in elevations up to 1000 ft. Standard wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
The high-altitude kit for the Williams 5507332 gas wall heater contains the necessary orifices for converting this heater to function in elevations up to 1000 ft. Standard gas wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
Decorative Grid Kit for use with the HS45GSP series tube heaters. Easy to install on either the Natural gas or Propane GSP units. Comes with everything you need to take the unit from commercial to domestic.
- Easy installation
- Creates a pleasing non-industrial appearance
- Steel construction
- Lightweight
Complete Heater Unit
- 480v
- 10kw
- 3 Phase
MFG Part# HT32TC705
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
MFG Part# 0275P00065S
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Installation Kit for 40 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ERXL 100,000 BTU or 125,000 BTU burner boxes with 40 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, and chain kits
- 24-Volt thermostat with 50-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
Heater Element
- 120V
- 90W
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 480v
- 4.5kw
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Header works with the Monterey 25K and 35K BTU wall furnace. Will also work with the Monterey Plus version. Replace the header without having to replace the entire furnace.
- Replace the part instead of the furnace
- Durable metal
- Comes fully assembled
- Easy to install
Wall or cabinet mounted millivolt thermostat. For use with Williams wall furnaces. Allows you to set optimal comfort for the rooms heated by a Williams wall furnace.
- Standard millivolt thermostat
- Can be cabinet or wall mounted
- No electricity required
- Easy slide for temperature set
Low voltage, 24-Volt, thermostat to adjust and maintain the temperature for a variety of heaters. Has a Fahrenheit and Celsius range. Slide control with off position.
- For use with high intensity infrared overhead heaters, low intensity radiant tube heaters, and forced air unit heaters
- 50-90 degree temperature range
- Also has Celsius scale
- Limited 1 year warranty
Williams Blower Accessory promotes increased warm air circulation and minimized temperature differences in the room for enhanced comfort. Designed to fit Williams Direct-Vent Furnaces 14,000 BTU. The blower accessory features a fully automatic fan switch.
- 115-Volt power supply required
- 125 CFM
- Fits direct-vent furnace 14,000 BTU models
- Blower is easy to install
The Mr. Heater Overhead Low Intensity Radiant Tube Heater 180° U-Tube Adapter Kit is a comprehensive solution designed to enhance the versatility and functionality of Mr. Heaters's low-intensity radiant tube heaters. This kit includes a 180° 4 in. return component, couplers and detailed installation instructions, making it an indispensable accessory for HVAC professionals and facility managers seeking to optimize their heating systems.
- 180° 4 in. return
- 180° u-tube kit is to increase the amount of btu's in a space where a straight run is not needed or possible
- Includes couplers that are precision-machined to guarantee a secure and leak-free connection
- Comprehensive and easy-to-follow installation instructions
1-Way Diffusing Grille for Forsaire Furnaces. The 1-Way Grille Kit is used to direct airflow from the bottom grille. When warm air discharges from the front, a diffusing grille can be used to divert heat to either the right or left. The blades are positioned to achieve the most effective airflow for your application.
- Fits all forsaire furnace models
- Soft-white enamel finish
- Louvers are positioned in 1 direction at 20 left or right
- Snap-on for easy installation
Heater Element
- 265V
- 20A
- For Gas Furnace Applications (pilots, flame sensors, etc.)
The category 3-horizontal 4 in vent kit provides class 3-single wall ducting for use with Mr. Heater Big Maxx unit heaters, ranging from 50,000, 80,000, and 125,000 BTUs. Complies with US standard (UL1738) and Canadian standard (S636). Designed for horizontal installation only. Kit includes 4 in. x 6-19 in. adjustable pipe, 4 in. x 12 in. vent pipe, 4 in. 45° elbow, 4 in. wall thimble, 4 in. termination tee, screws, and silicone. Stainless steel is required for horizontal installations per new category 3-certifications. Other parts may also be required for your specific installation needs. Please check and adhere to all state and local codes before installation.
- Category 1 horizontal 4 in. vent kit for use with Mr. Heater big maxx or heatstar by enerco brand unit heaters ranging from 50,000, 80,000, and 125,000 BTUs
- Stainless steel 4 in. sealed ducting meets new category 3-certifications
- Includes: 4 in. x 6-19 in. adjustable pipe, 4 in. x 12 in. vent pipe, 4 in. 45° elbow, 4 in. wall thimble, 4 in. termination tee, screws, and silicone
- Complies with US standard (UL1738) and Canadian standard (S636)
- Kit provides the pieces needed for an average installation - additional pieces may be needed
Heater Element
- 14.25kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
480v
- 70w
- 16" Leads
- 21.8-29" Dia
480v
- 150w
- 12-13" Dia
- 22" Leads
Installation Kit for 40 ft. Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- For us with the Heatstar ER2STG 80,000 - 125,000 BTU burner boxes with 40 ft. tube sets
- Kit includes: thermostat, shut-off valve, flex gas connector, vent cap, and chain kits
- 24-Volt digital thermostat with 45-90 degree range
- Chain kit has 2 ft. - 3 ft. chains and 4 S-hooks per every 10 ft. of tube
Heater Element
- 277v
- 5kw
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Floorboard provides a barrier between the heater and your home's floor. Use when your William's heater is placed on carpeting or vinyl-type flooring for best protection. Insulated metal floor board is painted to match your Williams' room console heater.
- Powder-coated black finish
- For use with Williams room console heater models 5001521, 5001522, 5001921, 5001922, 5002521, 5002522, 5002921, 5002922, 6501521, 6501522, 6501921, 6501922, 6502521, 6502522, 6502921 and 6502922
- For use when your Williams heater is placed on carpeting or vinyl-type flooring
- Insulated
Heater Element
- 4.8kw
- 240v
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Free Standing Accessory kit allows single-sided furnaces to be surface mounted instead of recessed. Ideal for remodeling in existing masonry wall construction or when wall studs are substandard. Comes in soft-white finish, 102 in. is maximum height.
- Use with Monterey top-vent models
- Heavy-gauge metal
- Matches the texture and color of the furnace to provide a completed finish
- Includes side rails and vent cover
Heater Element
- 15kw
- 1 Phase
- For BCS2 30/36/37/42/48/60 air handler