Heating Equipment Accessories
Oil Electronic Aquastat Controller provides electronic temperature sensing in a UL limit-rated controller. Controls the circulator, oil burner and boiler temperature. Provides status, LED diagnostic and EnviroCOM communication.
- Well mount, horizontal or vertical position, or flush mounted remote from the well
- Easy installation improved terminal layout and multiple knockouts make change-outs a snap
- Increased flexibility - vertical, horizontal and flush-mount options; configurable for single-function use
- Multi-function display - get set point, temperature reading and diagnostic information at your fingertips
Freshen the appearance of your Com-Pak heater with this convenient replacement grille kit. Perfect for quickly updating an old, discolored heater grille, this handy kit includes screws, a built-in thermostat knob and a plug for heaters without a thermostat. Simply installs with a screwdriver.
- Compatible exclusively with Cadet Com-Pak (CS) and Com-Pak Max (CM) electric heaters
- Use with Com-Pak and Com-Pak Max electric heaters with and without a built-in thermostat
- Kit includes screws, a built-in thermostat knob for heaters with a built-in thermostat and a plug for heaters without a thermostat
- One piece, 20-gauge steel construction with white powder-coated paint finish that eliminates sharp edges
- Installs easily using only a screwdriver
- Single grille kit in white (10-pack kits available)
- 1-year limited warranty
This is a genuine GOODMAN replacement part. Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. Professional installation recommended.
- Direct vent side wall vent kit
- HVAC application
- Dimensions: 7 in. x 7 in. x 4.5 in.
- Kit, vent, furnace, side wall
Easy to install and operate, this Com-Pak Series single-pole thermostat provides built-in temperature control. Designed exclusively for Com-Pak Series heaters, this thermostat lets you easily control the temperature with an adjustable dial. Designed with a low position (dial turned completely counterclockwise) that turns the heater on in cold rooms automatically.
- Provides built-in temperature control on Com-Pak heaters, eliminating the need for a wall thermostat and additional wiring
- Compatible with Com-Pak (CS), Com-Pak Twin (CST) and Com-Pak Max (CM) fan-forced electric heaters
- Simple 2-wire installation (single-pole)
- Almond knob matches your Com-Pak heater (White color available)
- 22 Amp
- Temperature range is 40°F - 85°F
- Accessory to UL listing of Cadet Com-Pak heaters
- 1-year limited warranty
- Choose the right thermostat for your heater and your home.
This powerful fan-forced electric heater provides excellent warm air flow, quickly warming up to 200 sq. ft. The horizontal, register-style grille blends seamlessly into any room decor. This product is an interior replacement heater assembly only with multi-watt and multi-volt options. A full heater unit requires a wall can and grille sold separately. A line voltage wall or built-in thermostat is needed for control.
- Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase, confirm your power supply voltage (check your breaker, use a voltmeter, or refer to your old heater's label if replacing)
- Multi-Watt options with 240-Volt wiring: 1,600-Watt output (6.7 Amps, 5,460 BTUs); 900-Watt output (3.8 Amps, 3,075 BTUs); 700-Watt output (2.9 Amps, 2,390 BTUs)
- Multi-Watt options with 208-Volt wiring: 1,200-Watt output (5.8 Amps, 4,095 BTUs); 675-Watt output (3.3 Amps, 2,305 BTUs); 525-Watt output (2.5 Amps, 1,795 BTUs)
- Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
- Effectively warms small to medium sized rooms. Wire the wattage output to suit your area requirements
- Fast and simple installation with one-screw mounting into existing recessed wall can
- For complete heater, a Cadet Register wall can and grille are required (sold separately)
- Thermostat required for operation; choose a line voltage electronic or programmable wall thermostat or RMT2 built-in thermostat kit (sold separately)
- Heating element and blower made from heavy duty gauge steel
- A high-temperature safety device switches heater off if normal operating temperatures are exceeded
- UL listed in the US for safety compliance with a 5-year limited warranty
Heater Element
- 3000w
- 277v
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Williams Blower Accessory promotes increased warm air circulation and minimized temperature differences in the room for enhanced comfort. Ideal for larger rooms where faster heat is desired. Designed to fit a variety of Hearth heaters.
- Fits model size 3501522, 5001522, 6501522, 3502522, 5002522 and 6502522
- Includes an automatic and manual fan switch along with a power supply cord
- 120-Volt
- 150 CFM
- Not for use on the 20,000 BTU/hour heaters
Heater Element
- 277v
- 5kw
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 14.25kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
This 90 degree elbow tube adapter allows the Heatstar ERXL or ER2STG tube systems to curve left or right. Great for ceilings with limited dimensions or redirecting to another area. Includes coupler and key for install.
- For use with the Heatstar ERXL and ER2STG tube systems
- Kit includes: 90 degree elbow tube, coupler, and key
- Tube is aluminized steel
- Coupler and key are stainless steel
MFG Part# 902824
- Genuine OEM product
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 15kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Williams Monterey rear outlet furnace register allows heat to be diverted into an adjacent room. A chain-operated damper and register fit flush on a wall on the back side of your furnace. The damper adjusts the amount of heat delivered through the register.
- Discharges approximately 10% of the heat into an adjacent room
- Great for bedrooms and bathrooms
- Heavy-gauge metal painted in a soft-white finish
- Damper and register fit flush on a wall on the back side of the furnace
- Chain-operated damper adjusts the amount of heat delivered through register
- Turns your single outlet model into a dual
Heater Element
- 15kw
- 1 Phase
- For BCS2 30/36/37/42/48/60 air handler
480v
- 8" Diameter
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)
The Williams Furnace Co. LP Gas Conversion Kit for the Williams Natural Gas Furnace Model #1403622 includes instructions, a conversion certificate and labels. The kit contains the necessary components for converting the Williams Natural Gas Furnace (model #1403622) to propane gas.
- Conversion kit
- Contains the necessary components for converting the Williams natural gas furnace (model #1403622) to propane gas
- Includes easy-to-follow instructions
- Includes conversion certificate and labels
Heater Element
- 10kw
- 1 Phase
- For BCS2 18/24/30/36/37/42/48/60 air handler
Williams Thin-Wall Collar Kit for use when wall thicknesses is between and 5 in. Designed to fit with all Williams Direct-Vent models. Used to increase thickness with wood strips are undesirable.
- Installs with vent kit on direct-vent models 1403622, 1403621, 2203622, 2203621, 3003622 and 3003621
- Constructed of durable metal
- To be used with Williams furnace vent cap assemblies only
- Original factory part
Thermostat for Heatstar ER2STG Tube Heaters. Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort.
- 24-Volt
- Digital
- 45-90 degree range
- Limited 1 year warranty
Williams dual header is designed to fit Monterey Dual-Wall Top-Vent furnace. This is a hardware assembly for the Monterey 50K BTU wall furnace. Also works with the Monterey Plus.
- Replace the part instead of the furnace
- Durable metal
- Comes fully assembled
- Easy to install
The high altitude kit for the Williams 5008232 gas wall heater contains the necessary orifices for converting this room heater to function in elevations up to 1000 ft. Standard wall heaters come rated for 0 to 2,000 ft. This kit will allow you to change the orifices for safe functioning at higher altitudes.
- Contains the necessary components required for converting a standard room heater to work in elevations that are between 2000 ft. and 8000 ft.
- Designed for use with the Williams gas wall heater
- Easy-to-follow instructions
- 3-orifice sizes included
The Mr. Heater Overhead Low Intensity Radiant Tube Heater 180° U-Tube Adapter Kit is a comprehensive solution designed to enhance the versatility and functionality of Mr. Heaters's low-intensity radiant tube heaters. This kit includes a 180° 4 in. return component, couplers and detailed installation instructions, making it an indispensable accessory for HVAC professionals and facility managers seeking to optimize their heating systems.
- 180° 4 in. return
- 180° u-tube kit is to increase the amount of btu's in a space where a straight run is not needed or possible
- Includes couplers that are precision-machined to guarantee a secure and leak-free connection
- Comprehensive and easy-to-follow installation instructions
460-480v
- 90/100w
- 18" Leads
- For Gas Furnace Applications (pilots, flame sensors, etc.)
Heater Element
- 8kw
- Multiple applications (such as drain pans or anything driven by a size or dimension)
- For Gas Furnace Applications (pilots, flame sensors, etc.)